TC 1tb and Wireless Epson 3800

Apologize if this is a recurring topic, I searched the board but was unable to find an answer...
I recently installed a TC without any problems. Backing up two macbook pro's. But I am having a devil of a time connecting an Epson 3800. I followed the instructions found on the forum, but it does not see the printer.
Appreciate any assistance.
Best regards,

Hello wallyr8. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Base Stations and Time Capsule

Similar Messages

Aperture and the Epson 3800

When I print from Aperture to my Epson 3800 all the dimensions in the print dialog are in metric. How do I change them to inches? Many thanks, Roger

Use Preferences - international - change from metric to US

MacBook and Wireless Epson Printer won't connect anymore?

I have a MacBook Pro running Lion OSX. I also have an Epson Stylus NX430. I had it connected to my laptop wirelessly and it worked fine. I went home for spring break and when I came back, I tried printing something, and my computer said that my printer was not connected. I checked the wireless settings on the printer and they were all correct. I checked my wifi settings on my computer and they were also correct. I couldn't get it to work so I unistalled the printer from the computer and tried reinstalling it. When I went to add wireless printers, my computer still didn't recognize the printer. Now I have to use a USB cable to print. How to I get my computer to recognize my wireless printer again?

Forgetting the Network didn't work. It's dong the same thing.
So if it's a router problem, what can we do?
Two devices work, and two don't...I just don't understand why.
Could it be that too many people have logged into our wireless and now it's out of IP's? Could we ask people who have previously logged into our internet to delete it completely? I don't know if that would free anything up?

Epson 3800 and Airport Express...drops connection with communication error

My problem is: my airport express worked fine for over a year as a wireless printer usb hook-up...but now it always says communication error after it starts to send data. I am using a epson 3800 with the newest driver (for leopard) and I have tested to see that the printer works by hooking it directly to the computer with a USB cable. I have also reset the airport express and reconfigured it. I have also switched out the airport express with another one in my house to test to see if it works. The airport express seems fine and will play iTunes remotely....but just will not print. I have also uninstalled the printer and re-installed it. I am at a loss to even what steps to try next, I upgraded to leopard and was not able to print much till the epson leopard drivers came out a few weeks ago...so I don't even know if its a leopard problem or epson...help

I had the same problem after I upgraded to Leopard and installed the newest R1800 driver from Epson and I got the same response from Epson. The Gutenprint driver does work but it does not handle color management properly and as you have discovered, not all of the print options are properly supported.
You can solve the problem by reverting to the older V3.0aAs driver available at Epson's website. When I did this I believe I used the epson installer to uninstall the v6.12 driver. Then I restarted and installed V3.0aAs and restarted once again. The old printer driver was automatically selected when I installed the printer.
Note. Before you do this, upgrade to 10.5.2 and see if that resolves the problem. The installation notes state that this upgrade resolves the issues printing to "some" printers but it does not say which. If this works, please post your findings and the rest of us R1800 owners can re-install the new driver.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

CS5 and Epson 3800. Prints Too Dark.

I've seen old posts about this, but nothing recent with this configuration of software and OS:
After years of printing successfully with my Epson 3800 from a PC, I recently switched to a Mac (Mac OS X 10.6). I am using Photoshop CS 5.
Despite many iterations of monitor calibration trying different settings, my prints are consistently about 2 stops too dark. I'm very vexed.
What is the latest information about this and how do I resolve this?
Thank you.

Hello!
The expert on 3800 is Eric Chan, one of the Camera Raw Senior Engineers : (scroll down after the Photo) http://people.csail.mit.edu/ericchan/
Message was edited by: Pierre Courtejoie -Typo

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

10.6.7 Upgrade and Epson 3800

Having difficulty reestablishing connection with my Epson 3800 after upgrading to 10.6.7. I have downloaded the Common Updater 7.0 and the Printer Driver 6.6, installed both, still cannot print. When I open Print Preferences and select the 3800, select Option and Supplies, and then select the Drive tab, it displays "The driver for this printer can not be changed." The exact error message I receive after attempting to print is "Error:/System/Library/Printers/Printjobmgr/Contents/MacOS/Printjobmgr Failed."
Has anyone experience the same issue and, if so, can you share with me how you rectified this?
Thank you.
Rich G.

Try resetting the printing system.
How to Reset the Printing System
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your print queues again.

Leopard and Epson 3800

Like most folks using Leopard and trying to print on an Epson 3800, I have lost most of the printing functions that should be available on a printer of that calibre. So much for my brand new Mac Pro, and my almost brand new Epson. However, with Tiger loaded on my MacBook Pro, the printer works just as it should. I really don't want to downgrade the Mac Pro from Leopard to Tiger, and I'm wondering if I can somehow link the Macbook to the Mac Pro in target disk mode, and print from there. Alternatively, I have three hard drives on the Mac Pro and I'm also wondering if I can load Tiger into one of them, and print from that drive. Has anyone tried either of these alternatives, and if one works, can you walk me through it? Any thoughts on this pesky problem would be appreciated (and, yes, I have read most of the threads I can find). Thanks.
Andy.

I am having the same Error:-9672 issue with my networked SPro 3800 Pro Edition and my PowerMac G5 running newly installed Leopard. I'm at a loss and a little confused. In order to work backwards as some of you suggest, how do I delete the new PPDs? Where do I find them in the Printers folder and what are they called? I just downloaded the Printer Driver v3.5cE and can't find what it loads. I want to go back to the older PPD and see if that works. If that doesn't I might try the Euro version. Is that a Beta version?
My issue is also Express won't see any PPDs in the print window even after all the updates. Depending on the printer selected it is ether grayed out or I can only select Generic versions.
Has anybody spoken to AppleCare?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

Having problems wirelessly printer with Airport and my Epson CX400

I recently bought an Airport Express and an Epson CX400. The printer works fine plugged in via USB to my computer but it doesn't work when plugged into my Airport Express. The odd thing is that my computer recognizes the printer in Print & Fax, however in the Epson Print Utility it doesn't and when I go to print a page I get the error, "printer is offline." I've tried re-installing the drivers and just about everything Apple suggested. I Googled the issue and I didn't find anything helpful or up-to-date. Has anyone had this problem and found a solution? A response would be greatly appreciated.
Message was edited by: David

I have the same problem with an Epson CX9400Fax. My printer setting says Location: Base Station eb8bbb. I've done all the updates I can find, talked to the friendly people at my local computer store. No help there. I just upgraded this computer from OS X 10.3 to 10.5.6. The printer worked wirelessly then. I have another iBookG4 that prints wirelessly just fine. So, what's up? Turtle

Macbook won't print to my wireless Epson printer - I've reinstalled the software multiple times....

My iPhones and iPad still prints to my Epson wireless printer but since updating my IOS, my computer finds the printer but can't print. After two phone calls to Epson it appears it is a problem on the computer side. Anyone been able to fix this on their computer?

I tried to figure out how to get drivers from Apple but their documentation is not very clear -- especially for someone new to Mac after decades of PC use. Finally I scratched that and called Epson. An hour and a half on the phone with Epson and finally it works again. Had to remove all the Epson files and then force the computer to find the drivers Apple had. I wish that the Apple articles would have been as clear on how to do this!
Thanks for the responses.

MacBook Air will not print on wireless Epson printer. It says 'filter failed'

MacBook Air all of a sudden will not print on wireless Epson printer. The error message is 'filter failed'. Shut down everything and rebooted, but still not printing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Test: Using Crop marks in indesign CS4 with Epson 3800 Mac 10.5.7

Jun 19, 2009 9:35 PM
Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7
My crop marks and pages are printing larger than my document sizes. My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes. But indesign is printing the entire document larger. So my document which is 11x14.75 is now printing 11.25x15.5. All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above? And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements. I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
So, here are my settings:
document size: 11x14.75
in the print panel:
Printer: Epson 3800
Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area. The bleed is 0 for top, bottom, left and right
Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
The settings on the Epson 3800
Epson 3800 Printer
Presets (set for the profile mentioned above)
No Color management
Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often. And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much. You don't even have to waste paper or ink. Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
Thank you for any response. And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late.... 646 256 8853.
Thaddeus

I specified the paper size as strictly 13x19, no boarderless, no retain size. Same problem. I also did as you suggested below. The pdf document does remain true to the document. As a pdf doc. I changed the color mgmt to Adobe rgb 1998. It looks okay, but not as lively as I get when printing correctly with my color mgmt working and in sync.
Your final question about simply using photoshop. Well... I might go back to it and give up on Indesign if this is the case that it won't simply crop my documents to the sizes that I input them to be cropped as. But, I am using Indesign so that I can create a page layout that I can't do in Photoshop. My folio is about 25 or more pages with double page spreads. I am printing on a two-sided Lumijet paper and my folio was custom designed to be cut out at 11x14.75. If and when it is printed correctly, I am printing on both sides of the paper and trimming it to exact size.
It sounds as if you have exhausted the potential problems and don't have a clear explanation for why the doc isn't printing correctly in Indesign either with the color mgmt. or the document sizes. I'll try one more print using a different color profile similar enough to get at minimum, an okay print. If it doesn't print at least okay, then it isn't most likely my profile..... Okay done. Crazy. The color is inaccurate, but for some reason or another, the document size printed correctly. It measured exactly 11x14.75. What I have done during this period of time is:
First) I did as you suggested and turned the Print to Adobe PDF 9 and created a print there. I measured it and it did measure correctly. I didn't love the color, but... at least it is measuring correctly.
Second) I turned the Printer back to Epson 3800 (I'm beginning to think that this simple gesture was what caused the printer to print correctly) I didn't change any settings, but I did make sure that they were set correctly as before. The paper size was set to 13x19. When I make sure this setting is right in the "printer" dialogue for the Epson 3800, and then switch back to ID, the printer dialogue in Id changes to "Define by Printer." But I changed nothing, other than the profile to an older one that I used before. The color is still inaccurate, but at least for two prints just now back to back, the measurements were correct. What to do? Lol.
Thanks again for all of your time spent trying to resolve this issue.
Sincerely,
Thaddeus

TC 1tb and Wireless Epson 3800

Similar Messages

Maybe you are looking for