TC 3.5 trial - Robohelp fails to make printed documentation
When attempting to generate printed output, fails - says it can't find Word.
At first, I installed the Office 2010 x64 trial, and that didn't succeed.
In Word, File?options>trust center, enabled macros and access to the object model.
No difference.,
Went to RH Tools>Options, added Word to open .dot, .doc, .dotm, .docx
No difference.,
Then I read there were interop issues between 32 bit apps and 64 bit apps.
Uninstalled Office x64, installed Office x32. Same symptoms.
Uninstalled TCS
Control panel > Office>repair
Re-installed TCS
no change.
Re-checked Word's macro security settings, RH's .dot and .doc settings - those had stayed as I set them - is that a clue?
Installed Office 2003 Pro, re-installed TCS.
Robohelp still fails to produce printed doc, claims it can't find Word.
help?
Moved to Technical Communications Suite Installer
Similar Messages
-
RoboHelp 10: Problems generating Printed Documentation
Environment
Windows 7 Enterprise, Service Pack 1, 64-bit operating system
Office Professional Plus 2010 Versions 14.0.7106.5001 (64-bit)
RoboHelp 10: 10.0.0.287
Visual Studio 2010 Professional. I open RoboHelp from within Source Control (have been doing it for two years).
Problem
Sometime after moving to RoboHelp 10, and even after successfully generating Printed Documentation output, I encountered a major problem generating Printed Documentation from RoboHelp: “Internal error encountered. Failed to generated Printed Documentation”. The error occurred when I tried to generate Printed Doc using my default TOC, which looks something like this:
Topic A
Topic B
Book 1
Book 2
Book 3
Topic C
Topic D
Based on an old Peter Grainge reply to someone about a similar problem, I removed all but the first topic from the Chapter Layout pane and generated the Help. Everything was fine until I got to the topics after Book 3. At that point everything started to fail again. When I removed Topics C, D, etc. from the Chapter Layout pane, the output was built successfully.
I tried moving Topics C, D, etc. to the top of the Chapter Layout pane, and got the same error. I tried creating a new folder and put Topics C, D, etc. into that folder. Failure after failure.
As an experiment, I removed all the Topics C, D, etc from the Chapter Layout pane, but then added them to the Print Document Section Layout pane (not where I want them). The Printed Documentation built successfully.
During attempts to build with Topics C, D, etc. in the Chapter Layout pane, I kept getting a Word error: Word is trying to recover your information. After that there was always a failure.
Selecting PDF as the output did not work when the Topic C, D, etc. files were at the bottom of the Chapter Layout pane.
I create a new TOC and a new Printed Documentation SSL. Failed to generate.
As a matter of reference, I've been generating Printed Documentation from the same TOC for more than a year and so cannot figure out what has changed in RoboHelp or Word to cause this grief .
Has anyone experienced anything like this?
CarolDear Peter,
Thanks for following up. Last Friday I finished extensive testing on my own and working with RoboHelp Support. Here's what I sent to Support this morning.
If after reading this screed, you think it worthwhile for me to get a copy from Source Control for you to look at, I will do so. Thanks for offering to look at it.
Environment
Windows 7 Enterprise Service Pack 1, 8.00 GB RAM, 64-bit OS
Microsoft Office Professional Plus 2010 Version 14.0.7106.5003 64-bit--Note: We repaired my current version of Word, in case that was the problem, but did not reinstall Office--we do not think that the Word version is the problem because we generated successfully with other TOCs and when generating individual documents.
RoboHelp 10.0.1.292. Upgraded from RoboHelp 9 in May 2013. Replaced hard drive in September 2013 and reinstalled RoboHelp.
Visual Studio 2010 Professional 10.0.40219.1 SP1Rel (I open the project from Source Control and check files out to a folder on my desktop.)
Issue
Printed Documentation failed multiple times with the default Table of Contents, which contains all the topics in the project. TOC specs are as follows:
Properties: .docx, desktop location, no conditions, embedded images, “Generate a single document”, “Retain hyperlinks”.
330 files, 12 top-level books, 15 second-level books, 7 third-level books, 6 fourth-level books, and 8 fifth-level books
Results
Generation to Printed Documentation does NOT fail for other, module-specific TOCs, nor to WebHelp Pro SSLs for the same sets of topics. In addition, and perhaps more important, generation to Printed Documentation does NOT fail with “Generate Individual Documents” selected, or when there are approximately fewer than 259 files in the TOC.
Did not fail consistently based on any particular topic.
Did not fail consistently based on location of any particular topic in the TOC.
Failed when I created new TOCs based on ‘working’ TOCs. For example, copied a module-specific TOC and then added topics to it from the default (superset) TOC. I did this in case the original default TOC was corrupted.
Failed when I create a new TOC with the same folder/file structure from scratch.
Failed when I created a new TOC with a flat file structure from scratch.
Failed when I retrieved an older TOC from the last release of the product.
Failed when I created new SSLs each time. I did this in case the SSLs had got corrupted.
Failed when I did not open the project from Source Control (removed project from Source Control and worked locally).
Began to see failure when there were more than about 258-263 files in the TOC. For example, successfully generated Printed Documentation with 262 files in the TOC. Added one topic and the generation failed. Removed that topic and added several others, one at a time. Consistently failed. To test this, I created a TOC with all the files in a flat structure, generated a report for the TOC, printed it, and counted the number of files. I then began deleting files and regenerating the Printed Document to try to identify the number of files in the TOC when the generation failed. Successfully generated up to about 258 files and then it began failing. (Occasional successes at 260 and 261, but that may be because I didn’t always consistently remove the Glossary and Index from the Chapter Layout pane.)
Other Comments
(I know that we should generally post non-RH issues to other forums, but in this case I wanted to include all potentially related issues in this posting.)
The first time you generate any type of output, the “Critical error of Source Control Provider. Please restart IDE.” Message appears. This message appears behind RoboHelp. As a result, if the RoboHelp window is maximized, you think that RoboHelp is hung. Forcing a close of RoboHelp leaves the partially generated Word document in an unstable state. When you re-open RoboHelp and try to generate the output again, RoboHelp says that the output is in use. Unfortunately, there is no way to ‘free’ the Word document and you have to restart the computer. In addition, when the dialog box is hidden, even using Alt+Tab to find the dialog box is complicated because you can’t grab it and click OK until RoboHelp completes its processing. The workaround is to reduce the size of the application window so that you can see the dialog box and try to quickly grab it and click OK. That said, as soon as processing is complete you can grab the dialog box and click OK; at that point RoboHelp displays its own error message about the success or failure of the output generation. It is not clear whether the RoboHelp API or Source Control puts up this error message, but it’s definitely a problem until you happen upon the workaround.
RoboHelp does not check SSLs even when I right-click the SSL in the Single Source Layouts pane, click Check In, select the XML and SSL files, and leave “Keep checked out” deselected. The red check mark remains next to the SSL name. In addition, even when I Check In All files before closing the project, the next time I open the project RoboHelp displays a series of Check In dialog boxes requiring me to check them in again.
When RoboHelp hangs during a Printed Documentation failure and the Version Control setting is to check in all files when closing a project (which I’ve now deselected to avoid this problem), Ctrl+Alt+Del indicates that you cannot shut down the program because RoboHelp is waiting for a response. Yes, RoboHelp was waiting for me to check in some files (because of the Version Control setting), but hid the Check In Source Files dialog box behind the application. This usually left a Word document in limbo, forcing me to restart the computer.
At one point RoboHelp stopped saving changes to an SSL after I made changes and clicked Save and Generate. Each time I reopened the SSL, I had to select .docx, etc. all over again.
Carol -
[SOLVED] - Unable to Distribute to Some DP's: Failed to make a network connection to ADMIN$ (0x5)
For the past few days I've been struggling to wrap my head around what may have happened that resulted in distribution errors like this in distmgr.log:
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:35 PM 6584 (0x19B8)
Found notification for package 'AP2000D9' SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:40 PM 5288 (0x14A8)
Used 0 out of 5 allowed processing threads. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:40 PM 5288 (0x14A8)
Starting package processing thread, thread ID = 0x1BA8 (7080) SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 5288 (0x14A8)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 5288 (0x14A8)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7080 GMTDATE=Thu Apr 24 18:06:41.487 2014 ISTR0="Wireless (Internal)" ISTR1="AP2000D9" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="AP2000D9" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
No action specified for the package AP2000D9. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Start adding package to server ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7772 (0x1E5C)
Start adding package to server ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 11496 (0x2CE8)
Start adding package to server ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Will wait for 3 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=11496 GMTDATE=Thu Apr 24 18:06:41.602 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 11496 (0x2CE8)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=6680 GMTDATE=Thu Apr 24 18:06:41.610 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
Get site system FQDN and account information from DB for ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
for ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7772 GMTDATE=Thu Apr 24 18:06:41.655 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7772 (0x1E5C)
Thread Handle = 0000000000002634 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Thread Handle = 00000000000024E4 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
The current user context will be used for connecting to ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
The current user context will be used for connecting to ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
The current user context will be used for connecting to ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Failed to make a network connection to \\brcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Cannot establish connection to ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Failed to make a network connection to \\sfcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=11496 GMTDATE=Thu Apr 24 18:06:42.260 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Failed to make a network connection to \\svcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=6680 GMTDATE=Thu Apr 24 18:06:42.329 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
Cannot establish connection to ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Cannot establish connection to ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7772 GMTDATE=Thu Apr 24 18:06:42.356 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
DP thread with thread handle 0000000000002634 and thread ID 11496 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Will wait for 2 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 00000000000024E4 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with thread handle 00000000000024E4 and thread ID 6680 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with thread handle 0000000000001D40 and thread ID 7772 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Created policy provider trigger for ID AP2000D9 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Package AP2000D9 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
A program for package AP2000D9 has changed, therefore it needs to be replicated to all child sites. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Package AP2000D9 is new or has changed, replicating to all applicable sites. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=AP2000D9, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
StoredPkgVersion (1) of package AP2000D9. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
SourceVersion (1) of package AP2000D9. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7080 GMTDATE=Thu Apr 24 18:06:44.252 2014 ISTR0="Wireless (Internal)" ISTR1="AP2000D9" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="AP2000D9" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Failed to process package AP2000D9 after 0 retries, will retry 3 more times SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:45 PM 6584 (0x19B8)
The log is huge so I invite you to check out the 'FailedDistributionLog.log' log in the 'FailedDistributionError5' folder of my OneDrive.
The hierarchy is simple:
single primary site with a local SQL installation, management point role (among other roles)
five other servers acting as the distribution points: 1 local, 4 remote
Something has changed recently because distribution was working fine up until I believe this week. I suspect some GPO is in place (or not in place) which is causing trouble, but I have not been successful in confirming that or isolating the issue to
anything other than "it affects my 2008 R2 servers".
What I've checked so far:
the site server (2008 R2 Standard) has no issues during distribution to itself
Local DP win7dp01 has no issues during distribution (this is a Windows 7 DP just for testing/proof of concept purposes)
Remote DP 2003dp01 (Server 2003) has no issues during distribution
Remote DP's 2008dp01, 2008dp02 & 2008dp03 (all 2008 R2 Standard) are producing the errors above
Site System Installation Account is set to 'Use the site server's computer account to install this site system'
All servers are joined to the same domain
All servers are members of an SCCM Servers AD security group
All servers have the above SCCM Servers AD security group added to the local administrators group
As part of troubleshooting, I've added the Site Server by name (domain\servername) to the local administrators group, in addition to the AD security group which its already a member of, to the three 2008 DP's that are failing. (The Windows 7 and 2003
DP's don't have this setup because they seem to be working fine with the AD security group.)
The firewall is disabled [via GPO] on all these servers & DP's
The ADMIN$ share is available & accessible on the three 2008 DP's
The three 2008 DP's have NO_SMS_ON_DRIVE.SMS only on the root drive (not the data drive)
The three 2008 DP's have Data drives which house the SCCMContentLib, SMSPKG$, SMS_DP$, SMSPKGSIG$ & RemoteInstall directories.
I checked the Share & NTFS permissions for the SCCMContentLib, SMSPKG$, SMS_DP$, SMSPKGSIG$ & REMINST shares, and local Administrators have full access/full control
The three 2008 DP's have at least 100GB free; this package is under 1MB.
The file 2 files in this package (one XML & one CMD) have very short file name lengths
The files in this package are not currently in use. (I've edited, renamed & moved them to be sure)
RSOP of the server confirms firewall is disabled (I checked wf.msc manually anyway)
Under Component Status, SMS_DISTRIBUTION_MANAGER is showing critical errors for the three 2008 DP's. I've copied up the relevant entries from the log up to my OneDrive as 'SMS_DISTRIBUTION_MANAGERLog.log'.
In short there are two error codes:
2323 with a description of:
Distribution Manager failed to connect to the distribution point.
Possible cause: Distribution Manager cannot access the distribution point machine because of access permissions issues.
Solution: Make sure that the site server machine account or Site System Installation account has administrative permissions on the distribution point machine.
Retry Interval is 5 minutes, number of retries left is 3.
2302 with a description of:
Distribution Manager failed to process package "My (Package)" (package ID = PRI000D9).
Possible cause: Distribution Manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
I stood up 1 more DP on a 2003 servers which completed successfully. Its already received content error-free. I'll enable PXE & verify that works before standing up my final 2003 DP. I don't have any other 2008 servers I could test
this on which complicates this a bit.
Before I go standing up more [2008] servers, what else could I be testing/validating?Tried to redistribute again this early morning and it looks like many packages succeeded but not all. For instance a .NET package I deployed reached 7 of 8 DP's, Dell CCTK reached 5 of 8 etc..
So seemingly by magic some DP's like some packages but not others. I quit.
distmgr log shows access denied errors as before:
Used 0 out of 5 allowed processing threads. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:43 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x188C (6284) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:44 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1DB0 (7600) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:44 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1210 (4624) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:45 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1858 (6232) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:45 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x5F8 (1528) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
Used all 5 allowed processing threads, won't process any more packages. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=4624 GMTDATE=Tue May 13 16:09:46.240 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="SITE10001C" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE10001C" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6232 GMTDATE=Tue May 13 16:09:46.243 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="SITE100022" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100022" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6232 (0x1858)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6284 GMTDATE=Tue May 13 16:09:46.248 2014 ISTR0="User State Migration Tool for Windows 8" ISTR1="SITE100001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100001" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6284 (0x188C)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7600 GMTDATE=Tue May 13 16:09:46.246 2014 ISTR0="Workshare Professional 7.5" ISTR1="SITE100018" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100018" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
No action specified for the package SITE100018. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1528 GMTDATE=Tue May 13 16:09:46.250 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="SITE100023" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100023" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
No action specified for the package SITE100023. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
No action specified for the package SITE10001C. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5344 (0x14E0)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6464 (0x1940)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1000 (0x03E8)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
Thread Handle = 0000000000002618 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Thread Handle = 0000000000002B18 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Thread Handle = 000000000000258C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
No action specified for the package SITE100001. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6284 (0x188C)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 3684 (0x0E64)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5504 GMTDATE=Tue May 13 16:09:46.713 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1000 GMTDATE=Tue May 13 16:09:46.738 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1000 (0x03E8)
Get site system FQDN and account information from DB for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6464 GMTDATE=Tue May 13 16:09:46.842 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6464 (0x1940)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=3684 GMTDATE=Tue May 13 16:09:46.762 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 3684 (0x0E64)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6832 (0x1AB0)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6388 (0x18F4)
No action specified for the package SITE100022. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6116 (0x17E4)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6832 GMTDATE=Tue May 13 16:09:47.037 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6832 (0x1AB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6116 GMTDATE=Tue May 13 16:09:47.045 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6116 (0x17E4)
Thread Handle = 00000000000026FC SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Thread Handle = 0000000000002160 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Thread Handle = 0000000000002A18 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6232 (0x1858)
for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5504 (0x1580)
Thread Handle = 000000000000164C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
The current user context will be used for connecting to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5344 GMTDATE=Tue May 13 16:09:47.335 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5344 (0x14E0)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 3684 (0x0E64)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 4468 (0x1174)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7072 (0x1BA0)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6388 GMTDATE=Tue May 13 16:09:47.457 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
Get site system FQDN and account information from DB for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
Failed to make a network connection to \\remotedp05.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6832 (0x1AB0)
The current user context will be used for connecting to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6116 (0x17E4)
for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7072 GMTDATE=Tue May 13 16:09:47.653 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100022" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7072 (0x1BA0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5752 (0x1678)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
Thread Handle = 00000000000026E0 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
Start updating the package on server ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7712 GMTDATE=Tue May 13 16:09:47.758 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7712 (0x1E20)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7712 (0x1E20)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 8080 (0x1F90)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5628 (0x15FC)
Cannot establish connection to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1000 GMTDATE=Tue May 13 16:09:47.921 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
The current user context will be used for connecting to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6388 (0x18F4)
The current user context will be used for connecting to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5504 (0x1580)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Failed to make a network connection to \\remotedp04.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5344 (0x14E0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5628 GMTDATE=Tue May 13 16:09:48.015 2014 ISTR0="Workshare Professional 7.5" ISTR1="["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
Thread Handle = 0000000000002320 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
Failed to make a network connection to \\remotedp03.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
Failed to make a network connection to \\remotedp05.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5504 GMTDATE=Tue May 13 16:09:48.254 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7600 (0x1DB0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 2548 (0x09F4)
Cannot establish connection to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7712 (0x1E20)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5344 (0x14E0)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=8080 GMTDATE=Tue May 13 16:09:48.397 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 8080 (0x1F90)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6116 GMTDATE=Tue May 13 16:09:48.360 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
Cannot establish connection to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6832 GMTDATE=Tue May 13 16:09:48.438 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
Cannot establish connection to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5752 GMTDATE=Tue May 13 16:09:48.495 2014 ISTR0="User State Migration Tool for Windows 8" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100001" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5752 (0x1678)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
Cannot establish connection to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=3684 GMTDATE=Tue May 13 16:09:48.597 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
The current user context will be used for connecting to ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7072 (0x1BA0)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7712 (0x1E20)
Failed to make a network connection to \\remotedp04.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
Cannot establish connection to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6464 GMTDATE=Tue May 13 16:09:48.843 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 1528 (0x05F8)
Failed to make a network connection to \\remotedp01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7992 (0x1F38)
DP thread with array index 2 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
DP thread with thread handle 0000000000002B18 and thread ID 1000 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 8080 (0x1F90)
Will wait for 3 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
Thread Handle = 0000000000002618 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5752 (0x1678)
Thread Handle = 000000000000258C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
Thread Handle = 0000000000002320 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7964 (0x1F1C)
Will wait for 5 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 0000000000002688 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 0000000000002D40 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5344 GMTDATE=Tue May 13 16:09:49.282 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5344 (0x14E0)
Thread Handle = 00000000000022F8 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Cannot establish connection to ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5628 (0x15FC)
Cannot establish connection to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5344 (0x14E0)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6232 (0x1858)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=2548 GMTDATE=Tue May 13 16:09:49.351 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 2548 (0x09F4)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6428 (0x191C)
Thread Handle = 000000000000234C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 00000000000021B0 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 752 (0x02F0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6428 GMTDATE=Tue May 13 16:09:49.564 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100022" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6428 (0x191C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5628 (0x15FC)
Shell launched under site server context shows I can access \\remotedp01\admin$ & manipulate files & directories. (e.g.: mkdir \\remotedp01\admin$\test_%username% && echo %date% %time% > \\remotedp01\admin$\%username%.txt) Also
ran wbemtest again to confirm connectivity to \\remotedp01\root\cimv2. -
Autopay account fails to make payment after account changed on UNLIMITED DATA PLAN
Auto pay feature fails to make payments without any logical reason: About 7 months ago I changed my account using My Verizon webpage. It has repeatedly failed to make a payment, resulting in over-charges and Verizon imposing a cash-only status for six months. My bank - and Verizon - confirmed that account information was correct, and no one could account why this was occurring, but read on! I believe this is more than a billing company or computer-generated glitch. I have an unlimited data account that was started years ago, and I believe many of you who have these accounts may be having the same billing issue. It is the prerogative of wireless carriers to now make huge profits by selling variable data plans from people needing more data bandwidth per month - in fact - it is projected that we will use 3000 GB/month by 2017! New accounts cost way more than my month-to-month; they lose money on people like us. I believe wireless carriers are trying every tactic they can to eject "unlimited data customers" from their plans. Having a lapsed billing cycle is one way the contract can dissolve.
I believe these repetitive mysterious auto-pay failures are very result of in-company tampering to disrupt service. Unfortunately, Verizon did not know that I am a consumer advocate...I know, you are thinking they don't give a... who you are, they are powerful. I have been taking on such companies, including the CEO's of large companies like ATT, USAA, etc. since 1998. I have reported thousands of products, services and individuals on 10 global consumer websites in three languages during those years, and used federal and international agencies. Law enforcement globally has often been used to arrest and convict many online criminals and even foreign pirates. With a law-enforcement background, and in a family of four powerful attorneys, two judges and two law-enforcement agents - I have an edge on resources and knowledge even powerful companies do not have. Yes, I am an expert in making life difficult, to impossible for many individuals who under-estimate me. I wasn't about to have a cash-only punitive measure impounded on me, when I could legally verify from my bank; and from electronic forensics of the Verizon website that the bank information, including a consistent balance of $10 - 17k in that account. Verizon then requested a fax letter from my bank verify the account information so it could be used; just another tactic to harass me. This type of request is a throwback from the 1980's before electronic communication.
This said, I am suspicious that this may be happening to many more customers than me. If it is, I would like to hear about this. Please post experience, and if you also have an unlimited data contract, so I can make an analysis of it. If I am right, then our collective allegations can be used to generate appropriate complaints and investigations by agencies governing business conduct and licensing of wireless providers, to include possible class-action suits, as well as civil suits, regardless of what your contract states.JEMAWOD, there's no need to be suspicious. We want to make sure that all of your concerns are addressed. The cash only status on your account will not affect your option to keep the Unlimited data plan. Cash only status is prompted when two payments within a 6 month time period are returned by your financial institution. However, this status is removed after 6 months of good pay history. Did you verify the banking information that you provided when you set up Auto pay? Did you have a chance to contact your bank to verify why those payments were returned?
I hope that the information that I've provided is helpful to you.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Weblogic Server 6.1 trial version fails to install in Linux
Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the unzip program
reported that some files and directories not properly named. (using winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing language, and the
background threw "Exception in thread 'main'".Yes, that is exactly what I ran and it worked.
Kernel: 2.2.12-20
java -fullversion
java full version "Linux_JDK_1.2.2_RC4"
That was to install.
Eric
"Mo Guangquan" <[email protected]> wrote in message
news:[email protected]...
Hello,
Could you give the detailed steps when you unzip and run? Did you only
use the command "java -cp weblogic610_generic.zip install -i console" andit
worked fine? Your system's basic setting like java version and kernal etc?
Thanks.
regards
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
I actually did my test with RH 6.1. It worked fine.
Regards,
Eric
"Alexander Klimenko" <[email protected]> wrote in message
news:[email protected]...
Sorry guys,
but if you go to "supported platform" document you'll se just Linux RH
7.1
there.
Regards,
Alexander
"Mo Guangquan" <[email protected]> wrote:
error still occurs, guess it is because inside the zip file got some
wrong
absolute paths. error msg:
ZGUtil.getInputStream(): ZGUtil.openZipFile(): Couldn't open /us
java.io.IOException: ZGUtil.openZipFile(): Couldn't open /us
at ZeroGb.c([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.m([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.i([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.Main.<clinit>([DashoPro-V1.2-120198])
at install.main([DashoPro-V1.2-120198])
preinstaller.properties not found.
Exception in thread "main"
regards,
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
Run the following to install it:
java -cp weblogic610_generic.zip install -i console
That will provide a console based install.
Regards,
Eric
"mo" <[email protected]> wrote in message
news:[email protected]...
Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the
unzip
program
reported that some files and directories not properly named.
(using
winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing
language,
and the
background threw "Exception in thread 'main'". -
my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?
my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?
-
Adobe Muse 'Trial initialisation failed' on Mac
Hello,
I am interested in trying Adobe Muse, however whenever I try to begin my trial I get an error message that says 'Trial initialisation failed, your trial has expired'. I have never used the software before, and I have tried creating another Adobe ID, I have installed it on another system and I still get the same error.
I am running Mac OS X 10.7.5 on a late 2006 iMac.
All help is greatly appreciated.I have the same problem with a same Mac OS X 10.7.5 in our company
Muse Trial was instal on one of our Mac, trial was over, then we get instal to another Mac with new Adobe ID, but he said on last step after login ID that 'Trial initialisation failed, your trial has expired. as if we install muse before...and nothing helps. we try delete OOBE and MBLStore and Adobe muse, reinstal adobe air, but nothing ...it looks like its blocked with our global ip, but it can not be. Why he (Adobe Air?/Muse) think that we had already instal and over Muse Trial on another machine (Mac), when we did not do this? like all our Mac is the same one. -
Flash trial verion fails to initialize
so, I downloaaded and installed flash on my laptop PC running
Vista. I havent had any problems in the past, but now when i try to
set up the trial version, it gives me this message: "the adobe
flash trial has fail to initialize, try restarting your computer or
re-installing your software..." ect. I don't know what could be
causing this.
If it matters, at one point i did have a full registered
version on this very computer for the entire creative suite.
however, my PC crashed and I therefore had to reformat the
computer. could this have anything to do with it?
please help if you can. Thanks.I wonder, do you have Adobe AIR installed? I installed AIR
before knowing there was an issue where you had to update Flash Pro
before installing AIR and now I can't install the update and
haven't been able to find any info or get any help to figure out
how to resolve the issue. -
"The software update failed. Make sure that your phone is connected to the computer and try again"
Hi
I just had my xperia Z3c in repairs, and now I seem to have the death screen or something. When I connect to a wall charger or my MacBook, it starts turning on and off, displaying the message "The software update failed. Make sure that your phone is connected to the computer and try again", even when it's connected to the wall charger, not the Mac. I've tried pushing the volume up + on/off button for 10 seconds, and Sony Bridge for Mac doesn't recognize the device. I was told to let it charge for an hour before turning it on at the store, which I did, but again, it starts flashing that message as soon as I connect it to anything.
Pleease help me out
Best regards
MariaConnect your phone to a wall charger > press and hold power & volume up for 10 seconds > let it charge for 2 to 3 hours
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Attendant Console "failed to make a new call" error.
I have a problem with the error message "Failed to make a new call" in multiple instances with Attendant Console. The first time this error comes up is if the first hunt group member does not answer the call and it goes to the next member. It only displays on the first member console. If I change the hunt group order, it still comes up on whomever is first on the list. This message also comes up whenever any Console user makes an invalid call which is expected but irritating to the users.
Can I disable these error messages completely? It is highly annoying since these error messages can stack up and have to be cleared by pressing "OK" before the user can click on the screen again.
TAC has not resolved the first error yet but everything works fine.Hi Luigi,
Thanks for the update. Even i had opened a TAC. In my case, we have configured Hunt Pilot, from where the call is routed to the members in the hunt group. But TAC says that the Attendant console never uses HUNT PILOT to take calls. So it has to be PILOT POINT which has to be configured for Attendant console to take calls.
We had configured in this fashion, because the AC stops working often. Even though it shows, 'activated in the control center. Manually the service has to be restarted on all the nodes. And all the callers will get busy tone when they try reaching the reception.
As an action plan, we need to revert to PILOT POINT configuration and do the testing again. So If found that the pop-up is not coming anymore, then TAC will work on fixing the AC service failing issue.
Hope this helps and will keep you posted on the updates.
Regards,
Karthikeyan. -
SSO- Connection failed. Make sure user mapping is set correctly and all....
Hi All...
I configured SSO Between EP6.0 and BW 3.5...By following this tutorial:
http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
every thing is working fine... when i trying to check the preview for an iveiw (it is invoking BEx in the BW
System) it is again asking BW System username & Password. I already done user mapping between the
portal user with the BW user.
After i reviewd my entire work i got one problem at:
System Administration --> System configuration --> Portal content --> opened my created system object ->
Selected Connection Tests --> Select Connection test for Connectors --> Click on Test Button --> Here i
got the following error : Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection parameters are correct.
I checked the usermapping area and connector Parameters those all are correct according to the document.
I was stuck at this place from 4 days please advice me what are the causes for this error
Best Regards
Abhi...Have you tested the SSO setting by running the program "RSPOR_SETUP"?
Yes Rajesh I tested by running the program RSPOR_SETUP in BW System.
It is saying connection is success to communicate with RFC Server.
The problem is comming from the portal side when i test connector properties for System object.
But it is saying WEB AS Connection properties are success for System object.
The exact Error Message is :
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Best Regards
Sudhakar A -
Failed to get printer information
I have a legacy application in C++, now ported to VS 2010. All works fine, except I get an intermittent error. I'm printing a CNiReport to a pdf printer (Win2Pdf). Every so often I get an error dialog pop up with the message "failed to get printer information" and the print fails (no pdf produced). This comes from the CnIReport:rint. Unfortunately I'm trying to run my program unattended and this dialog hangs waiting to be dismissed. If I dismiss the dialog and let the program continue, it does and then may or may not get the same error on the next Print. It fails both if I pass the printer name to Print and if I pass an empty name to make it use the default printer.
Can someone from NI confirm that the dialog is coming from CNiReport:rint and is there anything I can do to stop it? Also, why would it happen only occasionally?
Thanks
Phil reastonHey Phil,
Could you post a screen shot of the error dialog?
It is uncharacteristic of NI software to have an error cause a dialog to popup. Typically an error code is returned passed and dealt with in error handling or the execution (compiling, run, etc) failing. so I am inclined to say this error is associated with the printer driver.
Luke W -
YES! How to make PRINT QUOTAS WORK with 10.4
How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past. -
I just bought an HP Laserjet 5000N to make printing plates. I don't know how to connect it.
I just bought an HP Laserjet 5000N to make printing plates. A friend bought the HP 5000 and used a parallel to UBS cable to connect directly to her printer but she thinks her cable is interferring with running her jobs (too slow a memory). I don't actually know what the Jetdirect 610 card does. Can I connect through this ethernet port directly to my laptop, or do I use the serial side, or do I need to go through a router? Any advice?
If your computer is connected to the internet, and you connect the printer to the computer the printer is connected, if that is what you are asking.
The parellel cable is slow to transmit data. It is an older technology. Still works and is okay for type and large documents where the information load is low. Photoshop files are large and it cannot handle higher information loads well, so keep the files small.
The serial cable may have been upgraded to handle more information, as opposed to the parellel, so I would check at a computer supply store that carries cables.
To connect wirelessly we use the Jet Direct card. It has an ethernet connection that can plug into your modem which is plugged into your computer to access the internet. You still have to pay an internet provider. If your room has wireless internet you can get a wireless modem which will pick up the signal. You plug an ethernet cable from the Jet Direct card to the wireless modem, then use the IP number from the printer to set up the driver in your computer which then allows you to print. The Jet Direct card is just a chip board thing which just plugs into the computer at the back. See installation instructions for that but it is really easy. It is about $35 from feed roller.com for a used one, and worth it. It runs faster then the parellel cable without stalling out ie can handle more data.
You can get the IP number by plugging in the computer and hit menu then configuration. You don't need it to print directly from the computer using the serial or parallel cables. The other thing to check from the configuration page is the amount of memory. I upgraded to about 44 MBytes and the school one is 72 Mbytes. More memory helps. New technology uses more information. Again, an easy upgrade if you are using Photoshop. The memory chips were $10-15 dollars from feedroller.
Laura
We upgraded the driver to the current OS 10.8. It was not the original driver, but once we upgraded to that operating system, the print out was screwing up, so upgrade solved that. Follow the directions on the link. It is easy to do. -
Problem with RoboHelp 7 and Batch Generate "Printed Documentation"
Hello people! I have a problem with Batch Generate of Word documenttion in RoboHelp 7, when launch the Batch Generate with "Printed Documention" option selected send me a error message like this "Adobe Acrobat or Adobe Elments version 7 or Higher is not installed on your system".
RoboHelp generate de .chm file without problems.
I have the last version of Adobe Acrobat Reader Installed in my computer, my RoboHelp's project is not very complicated, the only to remarks is in spanish lenguage and the computer is in spanish too, but anothers projects in english US generate documentation without problems, I dont know if this had anything to do..
I have windows XP SP 3,so I test in another computer to generate documentation and I have the same problem. What´s happend ??
Thank you for all.I too am having this issue with the TOC. Firefox simply
doesn't handle it correctly and I have no idea how to fix
it.
Maybe you are looking for
-
Is it that we cannot run sql statement in main??
Hi all, sorry to bother again. But i have some problems. I had a program that have main method and some other small methods that contains some sql statement that call the db to retrieve info. But it keep on prompting me error: "Connection refused. Ch
-
Dial-up connection freezes programs
I am having a strange problem. :? When I am connected with my dial-up modem, some programs won't start (e.g. kuickshow) or will freeze when I try to open a dialog window such as open/save file (e.g. kedit, kdiff3, firefox). If I am not connected or
-
Hello , I have created a custom field in Opprutiny BT111H_Oppt under the node BTopporth created a field as Drop down List and marked as mandatory value for that Drop down will filled from Ztable all are working fine problem is in front end WEBUI valu
-
Itunes 11.1.2 keeps crashing on Maviericks... 3 times over 2 days
Not sure what caused the crashes... kinda random to me. Copied the first part of the crash report from the console. If anyone could notice what the reason is.... would be great. Much appreciated Y ++++++++++++++ Process: iTunes [849] Path:
-
Tax amount also fetting posted in GR
Dear Experts, I have created a new pricing procedure,selected a tax code in PO 1000 basic price 100 BED 2 Ecess 1 HEcess 1103 Total Now when i go for GR this total 1103 is ge