TC 3TB Model A1409 compatibility with OS X 10.9.4

I have a TC 3TB model A1409.  I have 2 OS X 10.7.5 machines and 2 OS X 10.9.4 machines.  The 10.7.5 machines back up to the TC fine using Time Machine.  The OS X 10.9.4 have stopped working, wire or wirelessly.  All are on the same network.  What is the issue?  Will a new TC fix it?  Will a new TC work with my 10.7.5 machines?

The older Gen4 TC is perfectly fine with any OS. The problem is Mavericks network is up the creek.
Often a simple reboot will refresh everything.. or a full network restart which should be done in correct order. modem.. TC.. clients with a couple of min for each device to boot between them.
When Apple changed to Mavericks they changed from AFP to SMB as the default network protocol. This I think has led them into a world even more bug filled than in earlier OS.
Please try the following to get your Gen4 working again.
1. Factory reset.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Ensure all computers have ipv6 set to link-local only. Eg for wireless
Do the same for ethernet if you use it. IPv6 is now vital to OS to work with the TC.
3. SMB naming rules are much tighter.. so please use new names when you go through the setup in airport utility.
eg TC name.. TCgen4
eg TC wireless name. TCwifi
4. In Mavericks manually mount the TC disk in finder.
Use Go in the top menu, Connect to Server.
type in
AFP://TCgen4.local (replace with whatever name you use, local is the default domain and will not change).
OR even better use the TC IP address. You can do this if the TC is the main router or you setup with static IP.
AFP://10.0.1.1 (that is the default IP.. replace with whatever IP your TC is on).
Store the disk password in the keychain. This should help to keep the TC running and available.. although the occasional reboot might still be necessary.

Similar Messages

  • HP 2Button PS/2 USB Mice (Model #: DC369A) compatibility with 64-bit Windows 7

    I haveHP 2Button PS/2 USB Mice (Model #: DC369A) is accurately represented on the Windows 7 Compatibility Center. Could you please provide me information whether it is compatible with 64-bit Windows 7 operating system? Could you please provide supporting URLs for compatibility information and drivers? Thanks in advance.
    This question was solved.
    View Solution.

    This mice do not need any specific drivers or software. It runs with the default Microsoft mice drivers. It is compatible with Microsoft Windows 7 64-bit operating system. You do not need to install any specific drivers.
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • X201s Model 5143-28U, compatibility with an Intel 6250 WiMAX chip?

    Hello all, I have an X201s, model 5143-28U with a WXGA+ screen which I'm aware does not have an extra antenna for 3G/4G connection, and 3G/4G isn't available without a hardware mod.
    With that said, I'm not sure if an Intel 6250's WiMAX would function in an x201s with the WXGA+ screen. Could anybody clear this up? Would WiMAX work without the antenna?
    Thanks.
    Solved!
    Go to Solution.

    Wimax share the same antenna with WLAN card.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • What Superdrive (external USB) is compatable with Mountain Lion 10.8.3?

    What Superdrive (external USB) is compatable with Mountain Lion 10.8.3? 
    My New install of 10.8.3, will now.... not reconize anything I put in my drive... it spits it back out!
    Superdrive does NOT reconize any activity. 
    It will show my information on/of my drive...but, that is about it...
    Is there a patch/fix for this issue with 10.8.3?
    If not...why is Apple (seemingly) ignoring this issue? There are so many with the same complaint.
    They want $19 to answer this question...why? I just bought the upgrade to 10.8.3 a couple of days ago.
    Anyone have any suggestion, beside switching BACK to Microsoft...?
    ~JOHN~
    My "About This Computer" info:
    Hardware Overview:
      Model Name:    Mac mini
      Model Identifier:    Macmini5,1
      Processor Name:    Intel Core i5
      Processor Speed:    2.3 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache (per Core):    256 KB
      L3 Cache:    3 MB
      Memory:    4 GB
      Boot ROM Version:    MM51.0077.B10
      SMC Version (system):    1.76f0
      Serial Number (system):    C0*******JD0
      Hardware UUID:    ****
    HL-DT-ST DVDRW  GX30N:
      Firmware Revision:    RP09
      Interconnect:    USB
      Burn Support:    Yes (Apple Shipping Drive)
      Cache:    1536 KB
      Reads DVD:    Yes
      CD-Write:    -R, -RW
      DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
      Write Strategies:    CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:    To show the available burn speeds, insert a disc and choose View > Refresh
    System Software Overview
    System Version:                    OS X 10.8.3 (12D78)
    Kernal Version:                      Darwin 12.3.0
    Boot Volume:                         Mac OS X
    Boot Mode:                            Normal
    Computer Name:                   John's Mac Mini
    User Name:                           John Lipscomb (johnlipscomb)
    Secure Virtual Memory:         Enabled
    Time since boot:                    6:04
    <Edited By Host>

    Sorry about the serial number...wasn't thinking.  Mentally noted.
    I would think it to not be too much, to ask for it to be able to read/write to the listed capablities list with the product (superdrive). The different media type...
    I insert blank -R DVD, -R CD, ...anything I put in,it spits it out.  NOTE:  The ONLY thing I've been able to get it to read, is some old CD's that I had some mp3 files on...it would read that OK... but if I try a DVD read or write and write a CD...NOTHING!
    This worked fine before upgrading to 10.8.3   was at 10.7.5....
    Any help would be much appreciated.
    ~JOHN~

  • Compatability with auto

    I own a Lexus 2007 ES350. Is the phone compatable with the Bluetooth installed on the auto?

    bsgcpa,
    This thread by other users on these forums discuss their successes with different Lexus models, including the ES 350.
    http://discussions.apple.com/thread.jspa?threadID=1017437
    Hope this helps,
    Nathan C.

  • Options re: Nike+iPod compatibility with non-nano iPods?

    Hi,
    I'm a runner who bought a fifth generation ipod (mainly for running) in late 2005. I am interested in the Nike+iPod system but was disappointed to learn it is only compatible with iPod nano, though many nanos use OS 10.3, like the fifth gen. ipod.
    Any suggestions beyond selling the one I have and buying an ipod nano?
    Thanks

    {quote:title=Jeff Bryan wrote:}
    The compatibility of the Nike kit with the nano has more to do with the nano being more suitable for running as it has flash memory and not a hard drive (no skipping or moving parts), and is lighter and smaller too. Much more suitable for activity sports. It has nothing to do with the Mac OS version.
    Thank you for the reply, Jeff.
    I appreciate your points and I don't mean to belabor the issue. I meant to say I purchased the iPod in late '06, which makes it just over a year old. Technically the Nike+ kit was available then, but it was basically brand new and I don't recall being aware of it.
    To respond in support of the 5th gen ipod, personally I've run with it well over 500 miles, up to 13+ miles at a time, over steep hills and through heavy rain and skipping has not been an issue once. The same is true for a few other runners I know who use this model. While the nano is smaller, the 5th gen is a good size as well, and a marked improvement over older devices runners used happily for years, so it is far from a critical issue.
    There's nothing you can do other than replace your 5th gen with a nano. There are no options to make your 5th gen work with the Nike kit.
    I understand and appreciate Apple's making an iPod tailored to running, but logically activity sports would have been considered a key use from the first iPod, and the pre-nano models are suited to this very well also. I am a usually-happy and consistent Apple customer, am just once in awhile annoyed when good (and relatively new) products are not included for compatibility with new systems. It seems to me that the points you mention, while logical, are far from critical, and that a product less than 18 months old using the same OS could easily have been made compatible with the Nike kit.
    Thank you again for the reply, I'll forward my thoughts to iPod feedback.

  • Mavericks compatibility with cs 4?

    Any experiences about Mavericks OSX compatibility with Adobe CS4 applications (Photoshop, Indesign, Illustrator)?
    I have Snow Leopard 10.6.8 and was planning to upgrade to Mountain Lion in order to use iCloud. But more importantly I am worried of how other applications will work. Apparently Apple doesn't even sell Mountain Lion anymore.
    I have Macbook Pro (late 2008/2009 model) with 4GB of RAM.
    Thank you!

    Unfortunately, I discovered too late that Mavericks renders my CS4 dysfunctional. Like wsrphoto indicated, it won't open image files. It will open the Raw preview screen, but when you attempt to open a file from there... nothing. No image. Nor will it open jpgs. When you close Photoshop, however, it asks if you want to "save the file"... pointless.
    My visit to the Genius Bar only resulted in them telling me my computer was fine and if I wanted to go back to Lion, I'd have to wipe my computer clean. Grrr!
    It would have been nice for Apple - or Adobe -  to warn users that Mavericks would create this problem. It has profoundly disrupted my workflow and now I've either got to wipe my computer clean to downgrade back to Lion, or put out the money to buy CS6 - which I really didn't need. Not happy AT ALL.
    Upgrades shouldn't be suggested only to end up creating problems...

  • Is ipod model ma146fb compatible with "windows 8"

    IS the Ipod classic model MA146FB compatible with Windows8?

    All versions of PSE except versions 1, 3, 5 & 6 will work with Windows 8. The best option is a new computer with W8 and then do a clean install of Elements. Some difficulties may arise if upgrading the operating system on top of existing software. In those circumstances make sure you have your original disks or your download package, in case a re-install is necessary.
    Microsoft Windows 8 compatibility.

  • Would a Kaiser Bass Scanner be compatable with my iPad?

    I'm a granny, live in New Zealand and I know nothing bout these but I need a scanner, please help! There is a scanner for sale locally but I don't know if it would be compatable with my iPad. My iPad according to the info in the settings, is Version 8.2 (12D508) bought couple of years ago and have done all the updates. The Model is MC979X/A. This is the info in the advertisement for the scanner:
    Kaiser Bass iPad Photo Scanner.
    https://www.youtube.com/watch?v=2B8U0zgsklw
    Model #:KBA03036Catalogue #:XP8141
    Old photos will deteriorate over time. Backing up and converting your treasured memories to digital enables you to keep everything in one convenient location and gives you peace of mind. With the dominance of social networking sites such as Facebook, and Twitter, digital sharing has never been easier.
    The days of needing a computer to print, edit or back up images are over. Those who fear computers or find it hard to learn new, intricate and confusing software, relax! Dock your iPad to the iPad PhotoScanner and use the free i-Scan app to scan your photos and documents up to A4 size directly to your iPad at 300 dpi resolution.
    The i-Scan app is very user friendly, convenient and quick to use, and the iPad enables you to have a preview and playback of your scanned images. When your iPad is docked, it will start charging when the iPad PhotoScanner is not in use.
    iPad Charging Station
    i-Scan App*
    Download the free i-Scan App directly to your iPad from the App Store.
    *The i-Scan App is free to download.
    High Quality Scans
    Scan photos and documents to JPEG format at 300 dpi resolution.
    Real Time Preview
    Photos and documents will display full screen on the iPad while scanning.
    Easy To Use
    Simple one button process to scan your photos and documents directly to your iPad.
    Specifications
    Scanner type: Colour CIS sheet feed scanner
    Light source: LED (RGB)
    Scan size: Up to A4
    Scan resolution: 300 dpi
    Scan speed: 6 ppm @ A4 colour 300 dpi
    File format: JPEG
    Paper thickness: Regular: 0.08 ~ 0.3mm, Maximum: 0.6mm
    Power: 5.1V 2.1A (iPad charger not included)
    Interface: Mini USB (for power only), iPad 30-pin connector
    Size: 308 x 111 x 72 mm (W x D x H)
    Weight: 655g
    What's In The Box
    iPad PhotoScanner, USB cable, calibration card, roller cleaning tool, lens cleaning tool, photo sleeve, User Guide.
    The price is $99. It sounds perfect for what I want to do, simply scan photos and newspaper articles to keep and put online etc. Any help greatly appreciated. I have got to make up my mind within a few hours. Thank you in anticipation.

    THIS IS WHAT I WOULD BE BUYING.

  • HT204368 I have a Contuor action camera, I can't import the software to my phone as it is not compatable with safari

    I have a contour action camera but I can't download the software to my phone as it is not compatable with Safari. Has anyone got a way to solve this problem?

    What model TC is this? How old and on what firmware?
    Do a full factory reset of the TC.. they do not like a change of setup.
    Remember changes to router require a power down of the modem for long periods.. maybe 30min maybe longer.

  • Panasonic SD700 Camcorder compatibility with iMovieHD

    I am considering the purchase of a Panasonic SD700 Camcorder not just for the reported image quality but because it has sockets for an external mike and headset. My only remaining doubt is its compatibility with iMovieHD. Is is simply a case of transferring the SD card from the camcorder to my Mac or does the camcorder output have to be converted into an iMovieHD-compatible format? Help would be appreciated. Regards.

    There have been a number of responses to my initial query but none seems to address it directly. I have both iMovie 09 and iMovie HD. The Panasonic model in which I am interested is the SD700 which only uses SD cards. I want to buy the most compatible camera possible to use with either of the above applications. I am trying to avoid having to do conversions to another format before I can edit. I am a newcomer to video & camcorders trying to avoid an expensive purchasing error. Further guidance would be appreciated and thanks to those who have contributed so far. Victor

  • Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

    Want to us my time capsule model A1409  as only backup. 2 TB hard drive.
    Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
    Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
    And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
    Have tried all of passwords can think of and none work.
    Held the reset button for one second on back of capsule and do not see if anything happened.
    What a conundrum.
    Appreciate any help to get this working.
    Thanks,
    John R

    I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
    Mine is wiredup thus;
    Eth cable from iMac to modem (not the WAN port should you have one),  then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
    I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
    and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
    Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
    Alan

  • What graphics card is compatable with my presario sr1710nx pc.

    What graphics card is compatable with my presario sr1710nx pc?  The current one died and I get nothing on my monitor and I tried connecting another monitor and still nothing.  So I assume it is the grahics card.
    This question was solved.
    View Solution.

    Hi:
    That is an old model.
    The specs state it has onboard (integrated graphics).
    If you are sure it is just the graphics that is kaput (you would know that if you hear Windows boot up and the logon music sounds or something) then...
    I would get a used Dell Radeon HD 2400 on eBay which should work just fine for you, but you will need to have a monitor with a DVI connection and a DVI cable.
    This is the cheapest one I could find.
    http://www.ebay.com/itm/ATI-Radeon-HD-2400PRO-256MB-PCI-Express-video-card-ATI-102-B17002-B-USED-/12...

  • Nano 3G Compatibility with speakers

    Hi!
    Planning to buy a ipod nano 3G....
    I´m a little uncertain about the compatibility with speaker
    systems - is there a "compatibillity list" somewhere?
    For example: will Altec Lansing IM600 and Griffin Journi work with nano G3-
    or will i need adapters of some sort?
    Thanks,T

    Who manufactures the 3G stick, what is its model number?

  • Knocked out wireless compatibility with network printers?

    I'm having this same issue with my 2008 MacBook running 10.7.5. Reading some other forums, it seems as if Lion knocked out wireless compatibility with network printers...
    I have rebooted my machine, uninstalled and reinstalled all my drivers and continue to have this issue while not having the same issue with my Dell (work issued) laptop. First time a PC has ever performed better than my Mac.
    <Re-Titled By Host>

    I still have questions about how to connect the Brother printer through ethernet. When connected does the airport utility have some area where you can identify the printer as a network printer as opposed to USB?
    The AirPort Utility would only come into play if the printer was attached to the TC's USB port. Printers, attached by Ethernet, would have to "network-ready." Controlling these types of printers would be through the printer driver that you would access through the operating system interface.
    In my HP example, the HP printer driver does provide access to a number of features particular to this printer model. Most manufacturers include an installation CD that provide useful utilities ... albeit most are written for Windows. I would suggest checking out the Brother support site to see if they have Mac-specific drivers or utilities.

Maybe you are looking for