TC connected and working on computer but not connecting to phones, says(internet connection)no valid IP Address in status..

My TC is connected to my modem, the internet works fine on the computer, yet my airtunes is still flashing as well as my TC. In status it says internet connection is the problem and there is not a valid IP address. Any help?

Details, please. By "my airtunes" do you mean an AirPort Express base station? By "the internet works fine on the computer", do you mean when the Time Capsule is connected to the modem, or when the computer is connected to the modem?
If things work when the computer is connected to the modem but not when the Time Capsule is connected to the modem, you may need to reset your broadband modem to convince it to connect to a "new" device. Depending on the model of modem, that can be as easy as removing power for a few moments. If that doesn't work, remove power and wait 15 minutes. Further reset steps can involve pressing a "reset" button or removing a battery if the modem has one. In the worst case, your ISP may need to edit its settings to update to the MAC address of the new router.
If you have an AirPort Express with a flashing status light, connect your Mac to the Express with an Ethernet cable and use AirPort Utility to see why it's complaining.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Similar Messages

HT201401 I changed my apple ID, it shows on my computer but not on my phone. How can I fix it?

I changed my apple ID, it shows on my computer but not on my phone. My still has my old apple ID, how can I change it?

Welcome to the Apple Community Amy.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

I have just done IOS update and now my computer will not recognise I-Phone is there anything I can do?

I have just done the IOS 5 something update on my phone it went to back up and now my computer does not recognise my phone and the phone screen just has the ITunes symbol with an arrow and usb cable on it. Does anyone have ideas of what I can do?

More info for you, I have not had the phone jail broken or anything like that. Please help as my phone has everything on and was fine before I did the update.

HT1386 When I try to sync a new playlist it won't go onto my iPhone. When I click "on this phone" the playlist is there on the computer but not on my phone.

I cannot get new playlists to sync on my phone. I could yesterday. When I click "on this phone" the playlist shows up on the main computer but not on my phone.

As I said, some items cannot be purchased with an existing credit on an account no matter how much it is. It can only be purchased with a charge to a credit card.

Lightbox works on computer but not on web...

Help!
I have used Lightbox2 and other lightboxes before, so I am a little used to how they work.
I wanted to not clutter my site any more than necessary, and so I left the Lightbox files in the original Lightbox2 folder; my files are outside the folder.
I corrected the links to the javascript and css files on my page.
The page previews correctly on my computer; but, when uploaded to the web, Lightbox2 does not work.
Why would Lightbox work correctly on my computer, but not on the web? Here is a link to one of the pages in question:
http://www.oldmanmountain.com/Pages/RackPages/RearRacks.html
Another question...Lightbox says we should check the links in the lightbox.js file to make sure the loading and close box links are correct. How do I point to these files? From the javascript file? or from the page file? I have tried everything and cannot get the close box to show on my computer (let alone on the web, where Lightbox doesn't seem to work at all).
Another reason for wanting the Lightbox files in their own folder is that I used to put the Lightbox files relative to the page that Lightbox was used on so I wouldn't have to change the links. I would rather have just one Lightbox folder for the entire site, and I would prefer to have it in its own folder. I posted this question on StackOverflow, but no one answered.
Thank you!

Hi,
in my IE8 your lightbox works (after a while of waiting) like this:
I only miss the both buttons: "closelabel.gif" and "loading.gif".
Hans-Günter

Sign in to icloud... but it is not showing the correct email. It works on my computer but not on the phone

Its is showing the wrong email... I can sign in on my computer but not the phone

Welcome to the Apple Community.
If it isn't showing up at all, it means that Find My Phone hasn't been activated.
If it's just the location that isn't showing up, it may well mean it isn't connected to a network at this time.

I have just updated my iphone4 and now I can't download any apps, its saying I need a valid US address?? any how much appreciated.

Any helpful suggestions to explain why I can't download any apps will be appreciated.
Its saying I need a valid US address I live in Australia? dont know why its asking that.

You can only access the Store of that country your account is registered for. Did you buy the apps using the same account? If you have a billing address registered in Australia, you can't buy in the US Store.
Can you update the apps in iTunes on your computer?
Did you log into your iTunes account and check your info?

[WRT54G] Random connection drops on hardwired computer but not wireless connections

I bought a WRT54G, it's a version 6 if that matters, using the latest Linksys firmware.
The WRT54G is connected to my main desktop and DSL modem, dynamic IP and PPPoE. I set the router with a static IP, there's WPA2 going as well.
I have a notebook and another desktop computer connected wirelessly.
The issue is that my main computer will seem to lose its Internet connection randomly for 15 minutes and then come back by itself.
The problem is hard to describe but I'll try:
Let's say everything is working fine, I go on www.someforum.com/forums and browse around then I go to www.bestbuy.com and click a few links.
Then the issue starts, I get a "Cannot find server" to sites I haven't visited yet in this session like Google or eBay. I can't ping them either. However, if I go to Best Buy or here, it still works fine. I can still browse the forums. So, it seems like somehow, if the connection is "cached," everything still works but I can't make new connections.
Also, during that 15 minutes when my hardwired desktop has the problem, my 2 other computers work fine over wireless.
I can access my router at 192.168.1.1 at all times.

Using the 2 procedures that you noted (answer ID 688 and 534) will get you port forwarding to a computer at a fixed LAN IP address behind your router. This means that your desktop computer would have a fixed LAN IP address that is set in the computer itself, and not assigned by the router's DHCP server. It sounds like the DHCP server is giving addresses to your other computers.
It is important to know what fixed LAN IP address you have assigned your desktop computer. The reason for this is that Linksys has specific rules about assigning fixed LAN IP addresses, and if you don't follow those rules, you can get problems like the one you originally described. That is the reason that I have pursued this question.
When you assign a fixed LAN IP address, it must follow these rules:
1) Any fixed LAN IP address must be outside the DHCP server range, which is typically 192.168.1.100 thru 192.168.1.149
2) The fixed LAN IP address must be consistant with the default gateway address, that is it must typically be in the form of 192.168.1.x
3) The "x" in item 2 cannot be equal to 1 or 255
So typically, a fixed LAN IP address must be in the range of:
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming that you did not change your default DHCP server range.
So for example, if you assigned your desktop computer an address of 192.168.1.101, this could be the cause for your problem. So what address did you assign to your desktop computer when you used the Answer ID 534 procedure?

Time capsule wireless works with computer but not other devices.

Wireless internet from the time capsule works with the laptop, but not with any other devices or computers. They pick up the wireless signal, but can't connect. Any ideas?

Thanks for the response. I appreciate any help you can give. The internet modem is from Insight Cable and is an Arris TM602G.
Wireless Mode = create a wireless network
Radio Mode = automatic
Wireless Security = WPA2 Personal
Internet > Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off
Internet > DHCP tab
DHCP Beginning Address = ? I'm not seeing where to get this info.
DHCP Ending Address = ?
I did notice on the summary that it shows 4 wireless clients, which I assume are the computer and the other devices that can't get the internet but get the wireless.

Connection issues with one computer - but not any other computer or iphone

I have a strange problem…. well, really it is my friends/co-workers problem, but I am his sponsor so I feel I need to be there for him.
We are both school teachers - and to help us in the eduction of our students we have created a wireless network (hidden so we don’t get caught!) that we can use in our area of the building. We have had it for several years and we have both hooked up to it regularly using our laptops and our ipod touch/iphone. Just recently my co-workers computer stopped being able to access the internet through the airport. We checked the settings, threw out the settings and re-entered them. Turned off the airport, turned it back on - typed in the network settings, connected - but no internet. We ran disk utility and repaired disk permissions. We have even gone as far as to create a new user…. still no luck. I have shut down and restarted the airport at school, still the issue remains.
He can see the shared disk attached to the airport, he sees my itunes library, I see his - and the rest of the teachers in the school see both of ours (we are music teachers, so our libraries are rather extensive!) and are constantly listening to our shared libraries. We know he is connected to the network, he just cannot access the internet. However, when he plugs in to the network (same settings) via ethernet - there is no problem he gets right into the network.
We both have airports at home - and we both have no problems connecting at home.
There are only two things that have happened since we noticed this problem… 1) is Snow Leopard - we believe the problem started AFTER that upgrade. and 2) we just got a new iMac Lab (I am teaching a new class - Audio Engineering this year) and in the lab I put a legal Airport - but that one IS NOT connected to the school network at all - it just allows all of the iMacs to access the shared hard drive (easier than running cable). This airport (new one - two channel) sits between his office and the old airport (single channel) that we use to access the internet and school network. I don’t think this is the problem as I have turned off the “new” airport and the problem remains.
Any ideas or suggestions would be greatly appreciated!!

Hi,
Sounds like you had the same problem I had, which I resolved:
http://blog.irreverence.co.uk/?p=467
Hope it helps.
Kenny

ASAP!! Flash Player Works on Computer But Not Live. (Could Be Easy)

I need to present this site in a couple of hours and ran into this problem.
I just added a Flash button that works perfectly on every single page except my gallery.php. All the other pages are .html. On my computer I can see the button perfectly, but when I uploaded and viewed the file it tells me to update my player. Why would it not work live and does it have anything to do with it being a .php file? Here's a link that works, The "Primerica" button on the top right is the focal point.
Works:
http://shepardsuperteam.com/chris/inner_circle.html
Doesn't Work
http://shepardsuperteam.com/chris/gallery.php
It looks more presentable in IE7 than FF but I need to remedy this ASAP!!!

With an intermittent problem, whether a solution really works
needs to be tested extensively. Someone else reported being able to
play Flash in FF with Flash 9 installed, IF they also had Flash 8
installed. But in that case and in yours, was there sufficient
testing before the solution was reported? Check out this page with
FF (it's a page that tends to generate the problem with a high
frequency, but not always):
http://www.yoism.org/?q=node/52#jill
If repeated testing on that page doesn't crash your ability
to play Flash, then your solution may really work. What version of
Flash does Adobe say you have when you visit this page?:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
The other problem with IE is probably unrelated to this. Did
you reinstall Flash for IE? For IE, you have to run the exe program
with winax.exe in the name.

FCP3 to DVD (works on computer but not dvd player)

Hi all
I'm trying to export a wedding video from FCP3 to DVD using Toast 7. I can Burn a copy that works perfectly on any computer but skips horribly on DVD player, does anybody have any idea what I might be doing wrong?
thanks for your help
Brian

Toast is not the best vehicle to encode DVD material. You might do better with iDVD and you would definitely do better with DVD Studio Pro.
x

Video files work on computer but not on published site

I am definitely missing something here.
I redesigned my website with iWeb and I am very pleased with the results. (The original site was done with Dreamweaver but then I migrated to Mac.)
I published it to my computer to check everything and then put it up on my server with a ftp program (filezilla. works for me). The page shows great on internet.
I now want to add a page with a newly created video. I drag the video clip on to the movie page I created. It is an avi file. On my computer it all works fine but when I publish it (to my computer to be sure it is OK), the video clip does not show up on the new page. I have tried with Safari, Firefox and Chrome. Same story on all.
I am afraid to upload it to the internet before I sort this out.
So my two questions would be:
1. What am I doing wrong?
2. What file formats does iWeb support?
thanks for any help.

The Miro Video Convertor is useful for format conversion if you want to provide as many as possible to encourage html5 playback in most browsers.
If you don't want to be bothered with all this, fallback players will use an MP4 (or MOV) in most situations and fallback to flash for browsers like IE. Examples are JW Longtail, FlowPlayer and VideoJS.
This method uses the QuickTime plugin. The problem is that, in a lot of cases, browsers will ask permission to run the plugin and visitors shouldn't be made to jump through hoops to get the movie to play.
Its worth the extra effort to make sure that as many of your website visitors as possible can just click and play.
A lot of people resort to Vimeo and YouTube but the problem with them is that visitors are tempted to leave your site at the end of the movie. Vimeo is better than YouTube in this respect and also has more customizing options.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

CS3 Mac: Button highlights preview and show on computer but not set top player

Hi,
I have a pretty simple project on CS3 Mac Encore (all Apple & Adobe updates except Quicktime is 7.3.1). It consists of three menus which started as Photoshop files with the button overlays done in Photoshop.
I have been DVD authoring a long time on DVD Studio Pro and am an expert with After Effects, so I had no problems setting up the DVD on Encore. It previews perfectly, and when I burn it to DVD, it plays perfectly on my Mac. However, when I tried to play it on two different set top DVD players (both high quality - one JVC and one Panasonic) the button highlights do not show up at all -- you can't tell at all which button is active.
I hunted through the posts here and at other forums, and the only suggestions that I have found are that it might be a corrupted project. I have tried trashing the preferences, repairing permissions, and rebooting, and the problem persists. It is a very new installation (I recently formatted the drive, and installed a fresh OS with Apple's suite and Adobe's suite because of the recent Quicktime 7.4 bug).
So... I will try to create a new project and see if this still happens. In the meantime, has anyone else seen this?
Thanks,
Graham Jones.

I'm having the same problems with a very simple dvd I created. 1 main menu (static background image and buttons from the encore library) and 1 scene selection menu (static background with the same button). Ouput to dvd -r and have 100% playback on computer, but I'm having varied playback on set top players. The dvd's play, but button highlight is not visible. The dvd will navigate as long as you count the clicks of the remote... I have duped 40 copies and my client couldn't play them on several different dvd players he has. We have tried them on several of our own players and not found a problem, but I traveled to his site and checked myself; they don't work. The 2 players that wouldn't display the highlights are a jvc dr-mv5su and a brand new durabrand sts96. I have re-created my dvd using dvd architect and they play fine on all the players (using a standard underlined text highlight). Any suggestions??? I really don't think I'm doing anything wrong, but I am new to Encore CS3 Mac.
Barry

Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

TC connected and working on computer but not connecting to phones, says(internet connection)no valid IP Address in status..

Similar Messages

Maybe you are looking for