TC for Oracle E-Business Suite Diagnostics for Release 11i

For those who already installed this patch, how long it takes for each task:
Step 1: Pre-install Task
Step 2: Installation Tasks
Step 3: Post-install Tasks
Thanks.

Emmuel,
It depends on how many nodes and how many languages you have.
3636980This is a small patch (Size: 8.9K), and it should not take more than few minutes. Make sure you follow the steps in the Patch README file carefully.
4337683
This is '11i.AD.I.2', and it should take between (30 minutes - 1 hour). Please note the latest AD.I patchset available is 11i.AD.I.6 (Patch 6502082).
Note: 233044.1 - About Oracle Applications DBA Minipack 11i.AD.I
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233044.1
Note: 390671.1 - How to tell what your current AD patchlevel is
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=390671.1
7530017This patch would also take between 30 minutes to 1 hour.
Assign "Oracle Diagnostics Tool" ResponsibilityThis can be done directly from the application and does not take time.

Similar Messages

Description required on DOC Planning Your Oracle E-Business Suite Upgrade..

Hi All
Im planing to upgrade Oracle Applications from 11i to 12 i. while reading white paper "Planning Your Oracle E-Business Suite Upgrade from Release 11i to Release 12.1" i want some description on following lines
How can we "Develop robust testing strategy." during oracle Applications Upgradation from 11i to 12i
What possable "oracle support resource available."
Which tools can we use that can improve upgrade and maintenance experience.
How to become Planning Your Oracle E-Business Suite Upgrade from Release 11i to Release 12.1 familiar r with oracle information available.
steps to minimize downtime.
Regards,
MuhammadSalahuddinManzoor

Hi,
Please see these threads for a similar discussion.
How can we reduced the patch time for u6394500.drv
How can we reduced the patch time for u6394500.drv
Oracle Applications upgradation from 11.5.10.2 to 12.1.1 Parallel Upgrade
Re: Oracle Applications upgradation from 11.5.10.2 to 12.1.1 Parallel Upgrade
Thanks,
Hussein

Oracle E-Business Suite Release 12.2.2 Media Pack v1 for Linux x86-64-bit avaliable NOW!

Hi Friends;
Finally Oracle E-Business Suite Release 12.2.2 Media Pack is available at e-delivery site.
For a now it has been published for linux x86-64.
Setup size almost 83G
Here is the some notes:
New Installation Customers who do not have access to My Oracle Support will not have access to key documents needed to perform a New Installation of Oracle E-Business Suite Release 12.2. This Part Number includes Document files which should be referred to when a ‘Document xxxxxx.1′ is referenced within the Documentation.
The first document to review is the “READ FIRST – Document 1320300.1, Oracle E-Business Suite Release Notes, Release 12.2.html”. This is your starting point for performing a New Installation.
Documents included under the Documents directory:
Check first:- Document 1320300.1, Oracle E-Business Suite Release Notes, Release 12.2.html
Document 389422.1, Recommended Browsers for Oracle E-Business Suite Release 12.html
Document 1155883.1, Oracle E-Business Suite Desktop Client Hardware and Software Requirements.html
Document 1314621.1, Oracle E-Business Suite NLS Release Notes, Release 12.2.html
Document 1330701.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x86-64.html
Document 1330702.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Oracle Solaris (64-bit).html
Document 1330703.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for IBM AIX (64-bit).html
Document 1330704.1, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for HP-UX Itanium.html
Document 1355068.1, Oracle E-Business Suite 12.2 Patching Technology Components Guide.html
Document 1376618.1, Oracle E-Business Suite Technology Stack Release Notes for Release 12.2.2.html
Document 1469456.1, DATAINSTALL AND HRGLOBAL APPLICATION 12.2 SPECIFICS.html
Document 1506669.1, Oracle E-Business Suite Release 12.2.2 Readme.html
Document 1560906.1, Applying the Release 12.2.2 AD and TXK Release Update Packs.html
This information&entery is avaliable at Oracle E-Business Suite Release 12.2 Supplemental Documentation – REVIEW FIRST V39664-01 at e-delivery site.
Enjoy it
Oracle E-Business Suite Release 12.2.2 Media Pack v1 for Linux x86-64-bit avaliable NOW! | Helios&#039;s Blog
Regard
Helios

Hi Friends;
Thanks for inputs... Still there is no input at Steven Chan blog yet
Anyway
@Hussein Sawwan
We know very well who is the fastest gun in forum so well And yes let the fun begins
@Asif
Thanks for input man
@Nayas
Let us know how the installation goes
Regard
Helios

API for creating new User in Oracle E-Business Suite through BPEL

Hello,
I would like to use a BPEL process to create a new User in Oracle E-Business Suite. In the Integration Repository I was able to find an API called FND_USER_PKG/LOAD_ROW that creates/updates Application's User data. Is this the API I should be using? If so, I would like to better understand how to use this API.
I have created a simple BPEL process and added an Oracle Application Service, which uses this FND_USER_PKG/LOAD_ROW API. I set the following parameter before Invoking the Oracle Application Service: X_USER_NAME, X_ENCRYPTED_USER_PASSWORD and X_START_DATE. When I run the BPEL process I get the following error. I suspect that I am not passing all the required input parameters. Does anyone have any sample data I can use to get this API to load correctly? If I am using the wrong API, please let me know.
Please note, I have also posted this question to the SOA Suite and BPEL discussion forums...
Thank you kindly!
Christine
- <input>
- <Invoke_OracleEBS_SecurityUser_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/">
<db:X_USER_NAME>
CRILEY
</db:X_USER_NAME>
<db:X_ENCRYPTED_USER_PASSWORD>
CRILEY
</db:X_ENCRYPTED_USER_PASSWORD>
<db:X_START_DATE>
2009-01-01
</db:X_START_DATE>
</InputParameters>
</part>
</Invoke_OracleEBS_SecurityUser_InputVariable>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
20001
</code>
</part>
- <part name="summary">
<summary>
file:/E:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_SecurityUser.wsdl OracleEBS_SecurityUser_ptt::OracleEBS_SecurityUser(InputParameters) - WSIF JCA Execute of operation 'OracleEBS_SecurityUser' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.FND_USER_PKG.LOAD_ROW API. Cause: java.sql.SQLException: ORA-20001: APP-FND-02600: Unable to create user CRILEY due to the following reason(s):
Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
An unexpected error occurred. Please contact your System Administrator...
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 783
ORA-06512: at "APPS.FND_USER_PKG", line 916
ORA-06512: at "APPS.FND_USER_PKG", line 1035
ORA-06512: at "APPS.FND_USER_PKG", line 645
ORA-06512: at line 1

Hello and thank you for your response. I am new to using APIs so please excuse my inexperience... I am not sure how to run the API outside of BPEL... Is that something you could easily walk me through?
I have made the following changes in BPEL based on your recommendation: 1) Added Oracle Application Service and used the API, LDAP_WRAPPER_CREATE_USER, found in the Oracle Application Module Browser* under: Applications Technology (ATG_PF)> User Management (UMX)> User (FND_USER)> PLSQL> User (FND_USER_PKG)> LDAP_WRAPPER_CREATE_USER
2) Set the following parameter prior to Invoking the Oracle App Service: X_USER_NAME, X_UNENCRYPTED_PASSWORD,X_START_DATE, X_END_DATE, X_DESCRIPTION, X_EMAIL_ADDRESS, X_FAX, X_EXPIRE_PWD.
3) Deploy and run BPEL through BPEL Control.
I get the following {color:#ff0000}error on the Invoke{color}. {color:#339966}Do you see any issues with the values I am passing in the input{color}? Any idea why I am getting this error? Is there anything that I need to have configured for the API to work correctly, other than adding an Oracle Application Service in the BPEL?
Thank you for your time,
Christine
bq. Faulted while invoking operation "OracleEBS_LDAP_Create_User" on provider "OracleEBS_LDAP_Create_User". \\ - <messages> \\ - <input> \\ - <Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ - <part xmlns:xsi="[http://www.w3.org/2001/XMLSchema-instance]" name="InputParameters"> \\ - <{color:#339966}InputParameters{color} xmlns:db="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]" xmlns="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]"> \\ <db:X_USER_NAME> \\ CRILEY \\ </db:X_USER_NAME> \\ <db:X_UNENCRYPTED_PASSWORD> \\ CRILEY \\ </db:X_UNENCRYPTED_PASSWORD> \\ <db:X_START_DATE> \\ 2009-01-01 \\ </db:X_START_DATE> \\ <db:X_END_DATE> \\ 2010-01-01 \\ </db:X_END_DATE> \\ <db:X_DESCRIPTION> \\ CRILEY \\ </db:X_DESCRIPTION> \\ <db:X_EMAIL_ADDRESS> \\[[email protected]|mailto:[email protected]] \\ </db:X_EMAIL_ADDRESS> \\ <db:X_FAX> \\ 999-888-7777 \\ </db:X_FAX> \\ <db:X_EXPIRE_PWD> \\ 0 \\ </db:X_EXPIRE_PWD> \\ </InputParameters> \\ </part> \\ </Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ </input> \\ - <fault> \\ - <bindingFault xmlns="[http://schemas.oracle.com/bpel/extension]"> \\ - <part name="code"> \\ <code> \\ 20001 \\ </code> \\ </part> \\ - <part name="summary"> \\ <summary> \\ file:/D:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_LDAP_Create_User.wsdl [OracleEBS_LDAP_Create_User_ptt::OracleEBS_LDAP_Create_User(InputParameters) |http://forums.oracle.com/forums/]- WSIF JCA Execute of operation 'OracleEBS_LDAP_Create_User' failed due to: Error while trying to prepare and execute an API. \\ An error occurred while preparing and executing the APPS.FND_USER_PKG.LDAP_WRAPPER_CREATE_USER API. Cause: java.sql.SQLException: ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ ORA-20001: {color:#ff0000}Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ An unexpected error occurred. Please contact your System Administrator.. \\ {color}ORA-06512: at "APPS.APP_EXCEPTION", line 72 \\ ORA-06512: at "APPS.FND_USER_PKG", line 3877 \\ ORA-06512: at line 1 \\\\ ;
Edited by: Christine Riley on Jan 28, 2009 1:22 PM
Edited by: Christine Riley on Jan 28, 2009 1:26 PM

Upgrading oracle database 9.2.0.5 to 9.2.0.8 for Oracle E-Business suite

I have applied patch to upgrade Oracle E-business suite(11.5.10) database from 9.2.0.5 to 9.2.0.8. but after applying patch also it showing 9.2.0.5. please help me.

Thanks Hussain for ur reply
server OS is windows server 2003 std. i have performed following steps
1.     First I installed 11.5.10.2 Technology Stack Validation Patch (Revision 1 July, 2005) on both application (D:\Oracle\visappl) and database (D:\oracle\Visdb\9.2.0) home. (p4318672_11i_GENERIC.zip)
2.     Then I review the html log file generated for both the home. Html file generated for oracle home with ALL PASS status. But html file for DBMS oracle home has return FAIL status. I review the reason in txkVal11510MP_DB.html. it gives me following reason to fail
“11.5.10.2 requires that your Oracle 9iR2 database version to be 9.2.0.6.0 or higher on Windows platform. Please refer to Oracle MetaLink Note 216550.1 "Oracle Applications Release 11i with Oracle 9i Release 2 (9.2.0)" to upgrade to the latest certified version of Oracle 9iR2. After upgrading to 9.2.0.6, you must apply 9.2.0.6 patch 5 ( 4287598 ) before upgrading to 11.5.10.2. “
3.     I went through the Metalink Note 216550.1. I refer Section 2 of it. I applied patch 5035661. when I applied this patch , output of this patch mentioned that OUI 2.2 is already installed on both the Home.
4.     Then I applied 9.2.0.6 patch 5 (4287598). Prior to this I applied patch 2617419 because patch 4287598 require OPatch 1.0.0.0.52.
5.     I performed patch 4287598 post installation task also. I didn’t apply windows patch 6, because my database was not showing 9.2.0.8 as required by windows patch 6.
6.     so this is the complete task list I have done to upgrade database from 9.2.0.5 to 9.2.0.8
output of given query is as below:
Oracle9i Catalog Views     9.2.0.5.0     VALID
Oracle9i Packages and Types     9.2.0.5.0     VALID
Oracle9i Real Application Clusters     9.2.0.5.0     INVALID
JServer JAVA Virtual Machine     9.2.0.5.0     VALID
Oracle XDK for Java     9.2.0.7.0     VALID
Oracle9i Java Packages     9.2.0.5.0     VALID
Oracle interMedia     9.2.0.1.0     LOADED
Spatial     9.2.0.5.0     VALID
Oracle Text     9.2.0.5.0     VALID
OLAP Analytic Workspace     9.2.0.5.0     LOADED
Oracle OLAP API     9.2.0.5.0     LOADED
OLAP Catalog     9.2.0.5.0     VALID

HIGH AVAILABILITY for ORACLE E-Business Suite

hai..
i am new to oracle apps administraion.i would like to know one thing.i now how to mantain high availability in the database using rac, dataguard and other concepts.but i would like to know how to mantaing high availability in oracle e-busines suite. is there any clustering concetps in apps? bcas at the database level using rac we can configure number of instances. here is it possible to mantian two or more web or forms..servers simultaneously using clustering concepts? any related papers or there? please guide me.
thanks..
srinivas pvs

Maximum Availability Architecture (MMA) and Solutions for Oracle Apps 11i can be found in the following links:
Note: 403347.1 - Maximum Availability Architecture and Oracle E-Business Suite Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=403347.1
Note: 207159.1 - Oracle E-Business Suite Release 11i Technology Stack Documentation Roadmap
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=207159.1

Steps for integrating oracle E-business suite R12.1.3 with 11g OID.

Hi All,
Can anyone please let me know the Metalink document ID/Steps for integrating oracle E-business suite R12.1.3 with 11g OID.
Thanks,
Dinesh.

Dineshkumar wrote:
Hi All,
Can anyone please let me know the Metalink document ID/Steps for integrating oracle E-business suite R12.1.3 with 11g OID.
Thanks,
Dinesh.Please refer to the following docs/links.
Using Oracle Internet Directory 11gR1 Patchset 4 (11.1.1.5.0) and Single Sign-on with Oracle E-Business Suite [ID 1286596.1]
Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR1 (11.1.1.5) using Oracle E-Business Suite AccessGate [ID 1309013.1]
https://blogs.oracle.com/stevenChan/entry/oracle_access_manager_11_11
https://blogs.oracle.com/stevenChan/entry/why_does_ebs_integration_with
Thanks,
Hussein

How to download language pack for Oracle E-Business Suite 12.1

Hi,
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?
Please guide.
Thanks,
Rohit

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

Installing Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4

Hi,
Here i am Installing Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4
Reference Document: Installing Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4 (Doc ID 1562372.1)
After the integration while login to endeca server with ebs user.
while clicking the application "The data source for this component is currently unavailable" error showing.
Please help me to fix this issue.
Regards
Kumar

Hi,
While checking the load data its showing error in clover url.
We got error like this.
Graph 'sandbox://Common/graph/FullLoad.grf' failed!
And we followed the document for this issue Endeca graphs failing (Doc ID 1549013.1)
Please help me to fix this issue.
Regards
Kumar

Implementing Single Sign-On support for the Oracle E-Business suite

Implement Single Sign-On support for the Oracle E-Business suite
I want implement Single Sign-On support for the Oracle E-Business suite.
Operationg System : linux/Solaris
Oracle E-Business suite : 11.5.10
Oracle Application Server : 10gAS(latest availble)
Type of integration : SSO and OID with 11i
No third party SSO or LDAP
Qusetions
1.If my SSO Server is down can i login to applications(11i) using normal mode(default login http://servername.xxxx.com:8000/).
2. Is it possible to have appilications (11i) in Linux/Solaris and 10gAS in windows.
Please answer...
NOTE:
I am following Oracle METALINK Doc.Id 233436.1 and 261914.1.
Thank you.
MARK

You couldn't login into server But You can use the following login
http://servername.xxxx.com:8000/AppsLocalLogin.jsp
For this you need to enable the Appslocallogin Profile option

Version of Application Server for Oracle E-Business suite 12.0.4 ?

Hi ,
I want to know the complete version of Application Server for Oracle E-Business suite 12.0.4 . The installation guide/ rapid install mention this :
A) Oracle database 10.2.0.3
B)Applications Server : 10.1.3 oc4j
C) Application Server : 10.1.2.2 (forms)
D) E-business Applications
But I want to know the complete version for 10.1.3 .Is it 10.1.3-3 or is it 10.1.3.4 or both ? This will help us ind determining the patches which can be applied ?
Thanks.
Best Regards,
brinda

Hi,
Please refer to:
Note: 468311.1 - Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12
Note: 454811.1 - Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12
Regards,
Hussein

How can I get Oracle E-Business Suite 11i for personal study purpose?

Hi,
How & where can I get Oracle E-Business Suite 11i for personal study purpose?
Also, is it FREE or one needs to buy it?
Is an evaluation version available on Oracle site?
Please send your response to at : [email protected] or reply on this thread itself.
Really appreciate your help!!!!
Best Regards,
- Amit

http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=7715892

Serverstats for Oracle E-Business Suite R12

Hi,
I am setting up some serverstat monitors for performance tests on Oracle E-Business Suite R12 application (for benchmarking and tuning). I have set up some monitors for measuring CPU and memory on the Webserver, Application server(both Oracle App server 10) and Database(Oracle 10g). Also I have set up monitors for the V$SYSSTAT & V$SESSTAT views for the database.
What other monitors should I set up for monitoring the E-business suite application.
Any advice from your experience would be very helpful.
Regards
CP

Hi,
You will just have to add the monitor profiles for linux in your OLT. You will need a user in your webserver who can run commands for iostat,vmstat,netstat, sar or whatever other monitors you want to set up. You can also set up virtual agent in Serverstats to run these commands individually using the user on webserver. If you have any more questions, you can post it here.
Please go through the Serverstats guide that comes with OATS installation to know more about setting up monitors.

Is there an associated Linux GUI Desktop available with the VM Virtual Appliances for Oracle E-Business Suite 12.2.4 64 bit or is it all command line?

I have downloaded the 16 pieces of Oracle VM Virtual Appliances for Oracle E-Business Suite (12.2.4) for x86 64 bit V52470-01 Parts 1 & 2 thru V52477-01 Parts 1 & 2 and unzipped and created the .ova.
I then imported that into VBox 4.3.22.
I went thru and changed the passwords for root, oracle, and applmgr as requested and entered a static IP.
I have not configured the DB or Applications yet.
However, I want to know if there is a typical GUI Desktop that can be brought up.
Thank you.

I have not been able to find a GUI desktop - I believe it is disabled or not included in the media.

Reagrding free version for oracle e-business suite 11i

hello everybady,
Are you happy ? i hope so....
I am new member of this group , I want to install demo ( free) version of oracle apps on window 7 for practise .
Please help me....

Hi,
I am new member of this group , I want to install demo ( free) version of oracle apps on window 7 for practise .
Please help me....Oracle Apps 11i is no longer available for download and you will have to log a SR to get the Media Pack, so go with R12 instead which can be downloaded from:
Oracle e-Delivery Website
http://edelivery.oracle.com
Oracle installation documents can be found at:
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Please note that Windows 7 is not certified as an application/database tier node, so go with one of the certified OS as per the doc referenced above.
If you want to access 11i/R12 instance, you may connect to Solutions Beacon instances (You must get a CSI number from Oracle Support to access those instances).
Release 11i/R12 Vision Instances
http://www.solutionbeacon.com/tool_vision.htm
Thanks,
Hussein

TC for Oracle E-Business Suite Diagnostics for Release 11i

Similar Messages

Maybe you are looking for