TC freezes while starting - Network adapter damaged?!

Hello everyone,
I have a TC 1TB, which worked fine a couple of month. Unfortunately, since yesterday, TC doesn't work at all, as it seems to be unable to start. From one minute to the other TC didn't appear in my Finder, TC showed a yellow light (not flashing). I tried to restart, since then, the following repeats after every restart (including those after resetting):
TC shows a "yellow light" => shut down the TC, disconnected any cables and start again; then, shortly after showing a "green light", the light starts flashing and than continues in yellow. After a few seconds, yellow light starts flashing, TC seems to restart, ten seconds later the green light appears, followed by the same flashing and continuing in yellow.... All along, TC's drive is running.
The Airport software recognizes my TC as soon as the green light appears, but cannot conntect because in the meantime, TC shows up with a yellow light and so on and on....
I tried to restart several times, including different types of resetting the TC (pushing the button while TC is running as well as when connecting to power).
Can anyone solve this?
I do not think that my TC is dead (unlike many other postings....), because I still can start it. Anyway, I can't connect to it, neither wireless nor directly via ethernet cable....

Hi!
I already tried this - but it did not help. Right now I am writing this lines while looking a streamed video from my iMac. You may ask, why it works - it's easy: I plugged on my old AVM Fritzbox 3070.
I will try this for another hour, but I guess that one thing is sure right now: the TimeCapsule is the problem, not any of my Macs or programs.
Well - and I decided one more thing: my Fritzbox doesn't work "apple-like" using "Back to my Mac". Sometimes I need this feature. So I decided to order an AirportExtreme today. It will arrive here in the next 3 days, so I can try this next Monday.
The TimeCapsule is very slow doing updates - so I never really liked it. Well - if the Fritzbox and the new Airport does a better job, the switch will be perfect.
Anybody out there interested in a nice TimeCapsule 500 ?
*EDIT - it does NOT work :,-(*
Well - my Fritzbox worked for 15 Minutes and now the Videostreaming freezed. BUT - the network does not freeze like it does using the TimeCapsule. However - I am really interested in the AirPort Extreme and if it will make a better job.
My "last idea": The TimeCapsule and the Fritzbox are both about 2 or 3 years old. Maybe the network-standard isn't fast enough for high quality video and causes a crash after a few minutes.
Message was edited by: willObst

Similar Messages

Error while installing network adapter driver on HP ML 370 G4

We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#

If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output).

Error while starting the adapter :Oracle9i InterConnect

I am facing this problem while starting the AQ Adapter Service.
Sat Feb 24 15:44:24 IST 2007: AQ Adapter: ** Error ** error reading from queue R_INDHDR_Q. Please make sure the database and queue are started properly.
oracle.AQ.AQOracleSQLException: No more data to read from socket
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1742)
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1276)
     at oracle.oai.agent.common.oracleaq.MessageReader.dequeue(MessageReader.java:79)
     at oracle.oai.agent.common.oracleaq.MessageReader.run(MessageReader.java:100)
Sat Feb 24 15:44:53 IST 2007: AQ Adapter: restarting database and AQ connections.
Sat Feb 24 15:44:55 IST 2007: AQ Adapter: resubscribing to queue R_INDHDR_Q.
Sat Feb 24 15:44:56 IST 2007: AQ Adapter: created a reader for queue R_INDHDR_Q.
Sat Feb 24 15:44:56 IST 2007: AQ Adapter: resubscribing to queue DEMOINT_Q.
Sat Feb 24 15:44:56 IST 2007: AQ Adapter: created a reader for queue DEMOINT_Q.
Sat Feb 24 15:44:56 IST 2007: AQ Adapter: restarted database and AQ connections successfully.
oracle.AQ.AQOracleSQLException: No more data to read from socket

well, windows 2000 has a different localhost numbers and ports, unlike regular window, windows xp and 98, the local host 8080 and 4848 are free. i am not so sure if thats the case in windows 2000.
how to change the port settings. well, i am afraid that you might do it the hard way, like reinstalling your j2ee, and from there, they will ask you the port number and the admin port... just check it out, you won't miss it

Oracle/security/pki/OracleWallet-Error while starting any adapter

Hi,
I am getting the following error while attempting to start any adapter :
java.lang.NoClassDefFoundError: oracle/security/pki/OracleWallet
at oracle.oai.common.security.wallet.OracleSecretStoreManager.getSecretStore(OracleSecretStoreManager.java:147)
at oracle.oai.common.security.wallet.OracleSecretStoreManager.getSecretStore(OracleSecretStoreManager.java:185)
at oracle.oai.common.inifile.IniFileReader.loadPasswords(IniFileReader.java:65)
at oracle.oai.common.inifile.IniFileReader.<init>(IniFileReader.java:149)
at oracle.oai.common.inifile.IniFileReader.<init>(IniFileReader.java:39)
at oracle.oai.agent.proxy.AgentProxy.initialize(AgentProxy.java:185)
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:397)
at oracle.oai.agent.service.AgentService.run(AgentService.java:43)
at java.lang.Thread.run(Thread.java:534)
can you please tell me exactly why we are getting the error and how can we resolve the error.
Regards,
Koushik

When I trying to run the as a software owner then the MQ adapters are running.
But for AQ adapters I am still getting a problem like below :
java.lang.NoClassDefFoundError: javax/jms/JMSException
at oracle.oai.agent.server.messenger.mercury.MercuryMessenger.init(MercuryMessenger.java:121)
at oracle.oai.agent.server.ServerManager.init(ServerManager.java:308)
at oracle.oai.agent.server.ServerManager.<init>(ServerManager.java:246)
at oracle.oai.agent.proxy.AgentProxy.go(AgentProxy.java:656)
at oracle.oai.agent.proxy.AgentProxy.start(AgentProxy.java:706)
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:415)
at oracle.oai.agent.service.AgentService.run(AgentService.java:43)
at java.lang.Thread.run(Thread.java:534)
java.lang.RuntimeException: java.lang.NullPointerException
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:424)
at oracle.oai.agent.service.AgentService.run(AgentService.java:43)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.oai.management.adapter.impl.AdapterManagerImpl.initialize(AdapterManagerImpl.java:174)
at oracle.oai.agent.proxy.AgentProxy.initializeManagement(AgentProxy.java:814)
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:422)
... 2 more
What is the reason for this error and how can resolve it?
Regards,
Koushik

CS5 Freezes While Starting Up. Can anyone help?

So I have had Photoshop CS5 for a few years now and about a week ago the program started to become slow and would sometimes freeze up while using the brush strokes, regardless of which tool and drawing utensil I used (mouse or tablet). So I uninstalled it and reinstalled it but now the program won't even start up! It starts and then gets to the "Initalizing..." part then stops and freezes, forcing me to close the program by force. I have uninstalled and reinstalled over and over again but with hardly any luck. And the one time the program did fully "run" it quickly froze and again, I had to close it by force.
I have installed the latest drivers for my computer, an ASUS G46V
It has a Intel Core i5-323M CPU @ 2.60GHz
Memory (RAM): 8.00 GB (7.89 GB usable)
64-bit Operating system with a x64 based processor
and is running on Windows 8.1
Any help is appreciated. I have tried running Photoshop with and without the tablet but it always had the same results. I have uninstalled and reinstalled and I have run the program as an administrator.
I also downloaded the free version of CS2 and the same problem seems to be appearing...which makes me think this might be a computer problem, but again, I need help with this. I rely on Photoshop for my art and I have commissions to do and finish.So I would like to get this fixed as soon as possible.

Killerwolf1020 wrote:
I did get CS2 for free from here https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads.
So unless I have to pay for this eventually then I guess it is free.
Yes you did were you honest when you agreed with the terms there? CS2 is not Free.
The serial numbers provided as a part of the download may only be used by customers who legitimately purchased CS2 or Acrobat 7 and need to maintain their current use of these products.
Killerwolf1020 wrote:
I have worked with brush sizes and it slows down for the large brush sizes regardless of the size of the canvas, but unfortunately I have a unfinished commission on a pretty large canvas, and resizing it not only freezes the program but it causes the picture to loose quality in looks. So I have tried all that. And this is a problem be cause this program literately just randomly stopped functioning properly. For months it worked fine with little to no problems, and then it just suddenly getting issues.
I only see lag with large tipped wet mixer brushes when I paint on image where I viewing actual pixel. Its a totally different story when you paint view fit on screen when you canvas size is large. I looks like Photoshop is painting the millions of pixels on the larges canvas tile by tile and scaling the tiles theo the zoomed out scalde dowv image its displaying for you to see. You not seeing the actual image being painted..

Imac intel freezes while starting

Hi,
my friend's imac intel duocore freeze in the late stages of the starting process. This appeared after running latest software update package, including iphoto, ipod, itunes, quicktime, keynote ....
Next, I started from install disc, repaired permissions, repaired disc with disc utility, which reported some errors, but told me, it was able to repair.
Unfortunately, this did not change anything!!
What should I do?
- run diskwarrior (3.0.3)?
Or will I have to install a new system?
If yes, is there a way to keep the old data?
The other thing I missed: when booting from cd, I expected to be able to see the harddrives data, but it was not! How can I access it.
If nothing helps, I'll run the imac as a slave disk of my ibook to backup!!
I'll hope there is someone to assist me a little bit!
Thanks in advance!

oh, I'm sorry.
looking into one the lates threads I found a million things to check before asking questions in here - sorry!

Blackberry Tour 9630 freezes while starting up and won't turn on

A few hours ago I uninstalled an app on my Tour, and was asked whether to reboot now or later to complete the process. So I selected to reboot now. The phone turned off and while the white loading symbol was feeling up it all the sudden stopped a little more than halfway loaded. So I removed the battery to try and start the process over and it continues to stop at the same point in loading process and won't turn on. I have never connected my Blackberry to computer before. Not sure what to do. Any help would be greatly appreciated, I really can't go without a phone this week end.

Same thing is happening to mine. They said update the software but it wont do it while rebooting. Geez, what to do. Need my phone badly as well.

Why does elements 13 crash and freeze while starting up while using windows 8.1

Have had problems with crashes and freezing up with both elements 12 and now elements 13. Thinking there are problems with Windows 8.1 and adobe premiere elements. Can anyone shed any light on this issue?

Perhaps you also need to reset the preferences file for your both PSE12 and PSE13. The suggested method for earlier versions (10 and 11) was posted here:
<can't get pse10 to take my styles, have had pse 10 since 2011 bought pse13 and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I have do not appear in the effect section. I have checked BOTh secti>
Read post number 3 to see if it works in PSE12 and PSE13. Do 12 first and then 13.

My Toshiba Laptop L655 freezes while starting up?

My Toshiba Laptop L655-S5150 is having trouble. It wont turn on at all. I start the computer and two options come up because it didnt turn off properly apparently. One is to start windows normally. The other is repair the setup. Either one I choose, it eventuall leads me to a black screen where I can control the mouse. Please help. I am very worried...

Satellite L655-S5150
If you haven't burned a Windows 7 System Repair disc, download one by scrolling down to the link Windows 7 System Repair Disc 64-bit here.
Create a Windows 7 System Repair Disc
Then try a Startup Repair and a System Restore from the Windows Recovery Environment.
What are the system recovery options in Windows 7?
Let us know how it goes.
-Jerry

What causes an intel mac computer to freeze while a networked HP Laserjet 8000 N is printing?

I get the 'beach ball' and can't do anything on my iMac, an intel computer (iMac 12,1 intel core i5 running 10.6.8) until the printer finishes completely, and it's a busy printer with 7 other production Mac operators at work. There is only one other production operator that also has this issue with the printer.

Hello,
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Raptor freezes while starting

hi,
after issuing 'sh raptor' on linux redhat es 3 i can see raptor loading and the 'oracle project raptor' window opens but stays empty and frozen.
on the window from where i issued 'sh raptor' i get:
Working directory is /stage/raptor/raptor/jdev/bin
Assert: Unknown Node:8: item type="PROCEDURE" reloadparent="true">
<title>Rename</title>
<prompt><label>New_Procedure_Name</label></prompt>
<sql><![CDATA[rename "#OBJECT_NAME#" to #0#]]></sql>
<help>Renames the selected procedure.</help>
<confirmation>
<title>Confirmation</title>
<prompt>Procedure "#OBJECT_NAME#" has been renamed to #0#</prompt>
</confirmation>
</item
Initializing.. [email protected]
Assert: SQLView inited
thanks

hi,
this is what i get using jstack:
[oracle@grid bin]$ /usr/java/jdk1.5.0_06/bin/jstack 6313
Attaching to process ID 6313, please wait...
Debugger attached successfully.
Client compiler detected.
JVM version is 1.5.0_06-b05
Thread 6313: (state = BLOCKED)
Thread 6327: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- javax.swing.TimerQueue.run() @bci=14, line=233 (Interpreted frame)
- java.lang.Thread.run() @bci=11, line=595 (Interpreted frame)
Thread 6326: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- java.lang.Object.wait() @bci=2, line=474 (Compiled frame)
- java.awt.EventDispatchThread.pumpOneEventForHierarchy(int, java.awt.Component
) @bci=9, line=189 (Interpreted frame)
- java.awt.EventDispatchThread.pumpEventsForHierarchy(int, java.awt.Conditional
, java.awt.Component) @bci=26, line=163 (Interpreted frame)
- java.awt.EventDispatchThread.pumpEvents(int, java.awt.Conditional) @bci=4, li
ne=157 (Interpreted frame)
- java.awt.EventDispatchThread.pumpEvents(java.awt.Conditional) @bci=3, line=14
9 (Interpreted frame)
- java.awt.EventDispatchThread.run() @bci=9, line=110 (Interpreted frame)
Thread 6325: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- java.lang.Object.wait() @bci=2, line=474 (Interpreted frame)
- sun.awt.AWTAutoShutdown.run() @bci=32, line=259 (Interpreted frame)
- java.lang.Thread.run() @bci=11, line=595 (Interpreted frame)
Thread 6322: (state = IN_NATIVE)
- sun.awt.X11.XToolkit.waitForEvents() @bci=0 (Interpreted frame)
- sun.awt.X11.XToolkit.run(boolean) @bci=64, line=463 (Interpreted frame)
- sun.awt.X11.XToolkit.run() @bci=5, line=438 (Interpreted frame)
- java.lang.Thread.run() @bci=11, line=595 (Interpreted frame)
Thread 6321: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- java.lang.ref.ReferenceQueue.remove(long) @bci=44, line=116 (Interpreted fram
e)
- java.lang.ref.ReferenceQueue.remove() @bci=2, line=132 (Interpreted frame)
- sun.java2d.Disposer.run() @bci=3, line=107 (Interpreted frame)
- java.lang.Thread.run() @bci=11, line=595 (Interpreted frame)
Thread 6317: (state = BLOCKED)
Thread 6316: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- java.lang.ref.ReferenceQueue.remove(long) @bci=44, line=116 (Interpreted fram
e)
- java.lang.ref.ReferenceQueue.remove() @bci=2, line=132 (Interpreted frame)
- java.lang.ref.Finalizer$FinalizerThread.run() @bci=3, line=159 (Interpreted f
rame)
Thread 6315: (state = BLOCKED)
- java.lang.Object.wait(long) @bci=0 (Interpreted frame)
- java.lang.Object.wait() @bci=2, line=474 (Interpreted frame)
- java.lang.ref.Reference$ReferenceHandler.run() @bci=46, line=116 (Interpreted
frame)
regards

Reply to : TNS:protocol adapter error while starting Listener created by Oracle SES11.1.2.2 Setup

To answer the post from Manwendra Jun 20, 2013 7:17 AM
" TNS:protocol adapter error while starting Listener created by Oracle SES11.1.2.2 Setup "
https://community.oracle.com/message/11077982#11077982
Hello,
Probably that you already have the listener up and running from your installation of SES.
Also, you could check in your Windows Services (from the Control Panel), you'll see that
there is a service like OraclesesTNSListener up and running.
If it is the case, then it's probably why it is telling you the message below when trying to start it again:
TNS-01106: Listener using listener name LISTENER has already been started
Then, before trying to start the listener, you can check if it is already up by running the command : lsnrctl status
If you need to shut it down, then you can run the command : lsnrctl stop
for example, from the command line:
> set ORACLE_SID=ASUSES
> set ORACLE_BASE=D:\ses\
> set ORACLE_HOME=D:\ses\seshome
> cd %ORACLE_HOME%/bin
> lsnrctl status            <== this will give you the status of your listener
> lsnrctl stop              <== this will stop your listener
> lsnrctl start             <== this will start your listener
Hope this can help you and others.
Regards,
-Stephan

i have done that. i copied the tnsnames.ora, sqlnet.ora, listener.ora files from the c:>oracle-home\network\admin folder into oracle_devhome\network\admin folder. i have also set the environment variable oracle_sid=skoolman. skoolman is my sid as you can see on the tnsnames.ora. but the error massage still comes up as soon as i run forms from the forms builder environment.
but as i said i am able to connect to the database with my user name and pass word from within the forms builder environment to access my tables and create data blocks etc but as soon as i run the form through internet explorer the forms servlet boots up and the error massage ora-12560 tns protocol adapter error pops up.
thanks guys for your heip. please i need more solutions

Freezes durig while using network

My netbook (asus eepc 1215b) freezes randomly while using network. wifi or ethernet dosent seam to matter, but it has never happend while the network was dissabled (possible coincedence). the system freezes compleatly no VTs no caps-lock light. Via netconsole I recoverd this dmseg log from the time of a freeze:
hello netconsole works
[ 2657.923984] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 2657.924039] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 2657.929269] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 9622.885706] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=18002 jiffies)
[ 9622.885706] Stack:
[ 9622.885706] Call Trace:
[ 9622.885706] <IRQ>
[ 9622.885706] <EOI>
[ 9622.885706] Code: 09 cf 3c 00 48 8b 05 99 0b 90 00 bf 02 00 00 00 ff 90 e8 00 00 00 eb 13 0f 1f 40 00 bf 58 89 41 00 e8 16 cb 1f 00 83 eb 01 74 0a
[ 9622.885706] 83 3d b9 09 90 00 00 75 e7 f0 80 25 6f 04 9f 00 fe eb 9a 90
[ 9802.992355] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=72034 jiffies)
[ 9802.992355] Stack:
[ 9802.992355] Call Trace:
[ 9802.992355] <IRQ>
[ 9802.992355] <EOI>
[ 9802.992355] Code: 04 08 00 0d 00 00 08 00 09 f8 83 ff 02 0f 44 c2 89 04 25 00 b3 5f ff 5d c3 48 8b 3d 55 07 5d 00 be 02 00 00 00 e8 8b fd ff ff 5d <c3> 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 80 3d
[ 9983.099003] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=126066 jiffies)
[ 9983.099003] Stack:
[ 9983.099003] Call Trace:
[ 9983.099003] <IRQ>
[ 9983.099003] <EOI>
[ 9983.099003] Code: 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 65 48 8b 14 25 58 2d 01 00 48 8d 0c 92 48 8d 04 bd 00 00 00 00
[ 9983.099003] 89 ca 48 c1 e2 04 48 29 ca f7 e2 48 8d 7a 01 e8 ad ff ff ff
[10163.205652] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=180098 jiffies)
[10163.205652] Stack:
[10163.205652] Call Trace:
[10163.205652] <IRQ>
[10163.205652] <EOI>
[10163.205652] Code: 09 cf 3c 00 48 8b 05 99 0b 90 00 bf 02 00 00 00 ff 90 e8 00 00 00 eb 13 0f 1f 40 00 bf 58 89 41 00 e8 16 cb 1f 00 83 eb 01 74 0a
[10163.205652] 83 3d b9 09 90 00 00 75 e7 f0 80 25 6f 04 9f 00 fe eb 9a 90
[10343.312300] INFO: rcu_preempt_state detected stalls on CPUs/tasks: {[10523.418949] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=288162 jiffies)
[10523.418949] Stack:
[10523.418949] Call Trace:
[10523.418949] <IRQ>
[10523.418949] <EOI>
[10523.418949] Code: 04 08 00 0d 00 00 08 00 09 f8 83 ff 02 0f 44 c2 89 04 25 00 b3 5f ff 5d c3 48 8b 3d 55 07 5d 00 be 02 00 00 00 e8 8b fd ff ff 5d <c3> 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 80 3d
[10703.525598] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=342194 jiffies)
[10703.525598] Stack:
[10703.525598] Call Trace:
[10703.525598] <IRQ>
[10703.525598] <EOI>
[10703.525598] Code: 04 08 00 0d 00 00 08 00 09 f8 83 ff 02 0f 44 c2 89 04 25 00 b3 5f ff 5d c3 48 8b 3d 55 07 5d 00 be 02 00 00 00 e8 8b fd ff ff 5d <c3> 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 80 3d
[10883.632247] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=396226 jiffies)
[10883.632247] Stack:
[10883.632247] Call Trace:
[10883.632247] <IRQ>
[10883.632247] <EOI>
[10883.632247] Code: ff c8 5d c3 66 0f 1f 44 00 00 55 48 89 e5 66 66 66 66 90 ff 15 f9 20 6b 00 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
[10883.632247] 89 e5 66 66 66 66 90 65 48 8b 14 25 58 2d 01 00 48 8d 0c 92
[11063.738895] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=450258 jiffies)
[11063.738895] Stack:
[11063.738895] Call Trace:
[11063.738895] <IRQ>
[11063.738895] <EOI>
[11063.738895] Code: ff c8 5d c3 66 0f 1f 44 00 00 55 48 89 e5 66 66 66 66 90 ff 15 f9 20 6b 00 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
[11063.738895] 89 e5 66 66 66 66 90 65 48 8b 14 25 58 2d 01 00 48 8d 0c 92
[11243.845544] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=504290 jiffies)
[11243.845544] Stack:
[11243.845544] Call Trace:
[11243.845544] <IRQ>
[11243.845544] <EOI>
[11243.845544] Code: 04 08 00 0d 00 00 08 00 09 f8 83 ff 02 0f 44 c2 89 04 25 00 b3 5f ff 5d c3 48 8b 3d 55 07 5d 00 be 02 00 00 00 e8 8b fd ff ff 5d <c3> 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 80 3d
[11423.952192] INFO: rcu_preempt_state detected stalls on CPUs/tasks: {[11604.058841] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=612354 jiffies)
[11604.058841] Stack:
[11604.058841] Call Trace:
[11604.058841] <IRQ>
[11604.058841] <EOI>
[11604.058841] Code: ff c8 5d c3 66 0f 1f 44 00 00 55 48 89 e5 66 66 66 66 90 ff 15 f9 20 6b 00 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55
[11604.058841] 89 e5 66 66 66 66 90 65 48 8b 14 25 58 2d 01 00 48 8d 0c 92
[11784.165490] INFO: rcu_preempt_state detected stalls on CPUs/tasks: { 0} (detected by 1, t=666386 jiffies)
[11784.165490] Stack:
[11784.165490] Call Trace:
[11784.165490] <IRQ>
[11784.165490] <EOI>
[11784.165490] Code: 04 08 00 0d 00 00 08 00 09 f8 83 ff 02 0f 44 c2 89 04 25 00 b3 5f ff 5d c3 48 8b 3d 55 07 5d 00 be 02 00 00 00 e8 8b fd ff ff 5d <c3> 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 80 3d
repeating until I hard reset the system

jup but all results are related to kernel 3.1 upgrades this started happening before the upgrade to 3.1. (took me a long time to get anoid enuff to do a netconsole as there is no info in the logs)
and im not quite knowlagabel to make sense of ths: http://www.kernel.org/doc/Documentation … llwarn.txt particularly the last line
Last edited by IM back (2011-12-19 21:34:20)

OWB Error while deploying the mapping Io exception: The Network Adapter co

Hi,
We are using OWB 10.2 in our production environment.Actually we are using OWB only for development.
After deploying each mapping we will create scheduler job for execution of these mappings.
Recently our staging DBs port has been changed to 1522 from 1521 and i have gone throgh the below steps.
1) Changed the port in tnsnames.ora file.
2) In Start Control Centre Servioce ,i have changed the port to 1522 for owbownr user and started the service successfully.
3) i have run the script UpdateLocation.sql from the OWBOWNR schema and updated the port number.
4) I tried to run the UpdateControlCenter.sql in owbownr schema and staging schema also,but i am getting an error like below.
SQL> @UpdateControlCenter.sql
This sql script sets the host:port:service parameters for a control center
in the OWB Client Repository.
The connection type must be host:port:service and cannot be changed
using this script.
Enter Control Center Name: DEFAULT_CONTROL_CENTER
Host: 10.109.65.62
Port: 1522
Service Name: DWHOWNR
Update location properties for DEFAULT_CONTROL_CENTER
Location Type =
Control Center DEFAULT_CONTROL_CENTER Found
Connection Type SQL*NET Connection cannot be updated
PL/SQL procedure successfully completed.
5) When i am running the service_doctor.sql on owbownr schema i am getting incorrect port number like below
SQL> @service_doctor.sql
There are errors in one or more PL/SQL packages and functions
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is available
There is a problem accessing the service startup script from the database
server
Here is the detailed error message which contains the name of the start
script file:-
Service startup file 'null/owb/bin/unix/run_service.sh' is not
accessible from the database server on instance number 1
Please verify that the disk containing the file is visible to the
database server
Please verify that the database server account has access rights on the
file
There is a problem with the repository connection information used to
start the service
Here is the detailed error message which contains the connection
information passed to the service:-
Cannot connect: user=DWHOWNR host=10.109.65.62 port=1521
service-name=DWHSTG
Please verify that this information is accurate
If this information is correct, then please use the
'set_repository_password.sql' script to reset the stored password
PL/SQL procedure successfully completed.
6) After login to OWB ,i have checked the Location,OWB Repository Location And Control center In OWB connection Explorer,
and all the connections are successful.
After this i took Control Centre from Tools and i tried to deploy one mapping.
And i got some error like below.
Name
Type
Status
Log
COPY_OF_ICDMAPFCTAWB
Description : Runtime User : ICGSTG Started : 2011-10-24 19:32:19.0
Name
Action
Status
Log
None
Error
Io exception: The Network Adapter could not establish the connection
None
Error
Io exception: The Network Adapter could not establish the connection
None
RECOVERY
RPE-01008: Recovery of this request is in progress.
Job Summary
Updated : 2011-10-24 19:32:19.0 Job Final Status : Completed with errors Job Processed Count : 0 Job Error Count : 0 Job Warning Count : 0
I think the issue is due to the wrong port number .
Can any one help me to solve this issue??
Edited by: 892899 on Oct 24, 2011 6:01 AM

Hi Allan,
Thanks for your quick reply.
I have checked in OWB\Locations\Database\Oracle\Location\DB Connectors and also in Control Center\Location\Connectors,seems like there is no connectors created.
Do you have any other suggestions?
Also i analyzed the UpdateControlCenter.sql in that
select value into v_connectiontype from cmpstringpropertyvalue_v where logicalname = 'CMPLocation_ConnectionType' and propertyowner = v_elementid;
the qry returns 'SQL*NET'.
Any workaround for these???
Please reply.

HTTP Adapter - Error While Starting

Hi all,
I get the following error message when i start my HTTP Adapter.
Initializing the Bridge oracle.oai.agent.adapter.technology.TechBridge..
Bridge started in XML mode.
java.lang.NoClassDefFoundError: HTTPClient/ModuleException
at oracle.oai.agent.adapter.transport.basic.TransportSenderFactory.createTransportSender(TransportSenderFactory.java:73)
at oracle.oai.agent.adapter.technology.TechBridge.registerTransportSender(TechBridge.java:1531)
at oracle.oai.agent.adapter.technology.TechBridge.init(TechBridge.java:402)
at oracle.oai.agent.proxy.AgentProxy.go(AgentProxy.java:600)
at oracle.oai.agent.proxy.AgentProxy.start(AgentProxy.java:639)
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:363)
at oracle.oai.agent.service.AgentService.run(AgentService.java:41)
at java.lang.Thread.run(Unknown Source)
The adapter is configured at the target side (Subscriber). Message type used is XML. The requirement is : Subscribe the XML message and post it to an URL. I get the above error when i start the adapter.
Any idea why iam getting this error message? Has anyone succeeded using the HTTP adapter.
Thanks,
Shah

The library http_client.jar is probably missing in your adapter classpath.
The problem is that this jar is not delivered by the adapter installation . You will find this library either in the Hub directories nor int the java OC4J product librairies
regards

TC freezes while starting - Network adapter damaged?!

Similar Messages

Maybe you are looking for