TC hibernates and wakes hdd's over and over again?

Anyone else has experienced same problem after latest TC update that causes TC hdd and usb hdd attached to TC sleep and wake continuously? It happens about once a day and only TC boot helps. TC puts hdd's to sleep and then wakes them up over and over...
Without a reset/boot it continues to do so as long as my nervous can last... Before latest firmware this never happened. Is there anything to be done to fix it? I have turned all other devices of so they dont check TC hdd's but it did not help.

Hello, i'm french and i have the same problem of you!
Since 7.6 firmware...
Is it possible to back on last firmare?
May be with hard reset...?
Please we need help before hdd crash!

Similar Messages

  • Since the lastest update, videos will no longer play. They start and stop over and over again.

    Since the latest update to Firefox, I can no longer view videos on my PC. They start, play for a few seconds, then stop and repeat this process over and over again.
    I have a high speed internet connection and never had this problem until this past Thursday (10-06-11) after Firefox updated.

    Hi ..
    Restart the Apple TV >  Apple TV: How to restart your Apple TV
    Then reset yor iPad >  Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then try AirPlay.

  • I HAVE A USER ID, A SYNC KEY BUT NO WORKING PASSWORD ; CAN I CANCEL THIS ATTEMPT AND START OVER again.

    i followed all the directions e ,mailed to me ,but when i tried to sync my iphone the error message said incorrect password. I then asked for a second set of instructions and redoubled my efforts and still no sucess i tried to reset tghe password but I don't have a sync tab setup under firefox/tools/options. If allowed to cancel the sync key and start over again knowing the pitfalls I have encountered I would be succeswful. i THINK FIREFox is the best system I enjoy using it every day. thankyou

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

  • When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the the paper download was the first thing I did on my Ipad

    When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the paper download was the first thing I did on my Ipad and that no other apps were open.

    Have you tried a Reset (No Data will be Lost)
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Listening to an audiobook when it started repeating just 2 words over and over again and I can't stop it

    How can I make my ipod return to normal.  It just keeps on repeating 2 words over and over again?

    Turn on iPod touch. Press and hold the Sleep/Wake button until the Apple logo appears.
    •• Open Camera when iPod touch is locked: Press the Sleep/Wake button or the Home button,
    then drag up.
    •• Access the audio controls when iPod touch is locked: Swipe up from the bottom edge of the
    screen to open Control Center.
    Unlock iPod touch. Press the Sleep/Wake button or the Home button, then drag the slider.
    Turn off iPod touch. Press and hold the Sleep/Wake button until the red slider appears, then drag
    the slider.
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete the audio books and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • My ipad 2 is completly dead and when plugged in it just restarts over and over again.

    I was using my iPad completly functional and it went dead like normal because the battery ran out. So I plugged it in restarts...then as soon as it shows my wallpaper it dies.but because it is plugged in it reboots again. The second it shows my wallpaper again it turns off! And it does this over and over again without stopping.

    You have to solve the charging problem first.
    1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo (you may not be able to reset because battery is flat)
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • Is there a way to create an e-mail template to send over and over again to different people?

    Can I create a template and use it over and over again? I found where I was able to save an e-mail as a template but I cannot find where to access it to be able to send it.

    Read this.
    http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Using_Templates

  • My iPod Touch is running on ios 7. In the last two and a half months all the apps of my iPod have been wiped out twice. I had to download all the apps all over again. Why is this happening?

    My iPod Touch is running on ios 7. In the last two and a half all the apps of my iPod have been suddenly wiped out twice. I had to download all the apps all over again. Why has it happened?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • Every time I want to log in to my Hotmail account I have to type my password over again, and every time I log in I try to save my password. I have tried hundreds of times, but it seems impossible. What am I doing wrong?

    When A person want to log in to a hotmail account to read or send an E-mail, one have to enter the e-mail adress and password. There is also a small square you can mark i you want Firefox to save your password so that you don't have to enter password every time you log in to the e-mail account (in this case hotmail)
    Every time I log in to hotmail I mark the square so that Frefox will save my password, but my password has never been saved. I'm so tired of always having to enter my password, over and over again.
    What do I do wrong? How can I solve tis problem?

    * Websites remembering you and automatically log you in is stored in a cookie.
    * You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
    * Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    See also http://kb.mozillazine.org/Cookies

  • I have a current iPhone 5 with all my apps and games at certain levels, how do I use iCloud to transfer current game levels as only a few games have transferred and other games want me to start all over again on my new iPad?

    I currently have an iPhone 5 that I play games on regularly and I have just bought the iPad 4 and I want to transfer all my game progress from the iPhone to the iPad. I have turned on iCloud on both devices and backed up and while all my games transfer only some of the games maintain progress where others want me to start all over again. I pretty sure I doing something wrong... Can some help or give me idiot proof guidance on how do do this successfully. I'm generally pretty tech savvy but this has me stumped and iCloud is ment to be easy to use.

    I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
    So if I were you, I would address that individually with every game provider.

  • Can't find printer over and over again

    Every time I try to print, I have to use the Wireless Setup Wizard AGAIN and type in my network password AGAIN until my computer finds my printer AGAIN.  Then I can print.... until I can't AGAIN and I have to do all this AGAIN.  This has become a royal pain.  I can only print consecutively IF it is still printing while I send it the next thing to print.  If my printer is finished printing one page, and then a minute later I send it something else to print, the computer can no longer find the printer so I do all these steps over again.
    I'm on a Mac that is about a year old, if that, runniong Mac OS 10.9.5 .  My HP 7520 used to print with no issues when I got it a few months ago.  I don't think I was running 10.9 at the time, or at least not 10.9.5 .  At some point I upgraded my OS so I wonder if that's when the problem started - but I don't know for sure.  Another issue is that my ipad can no longer find my printer, either, so I can no longer use Air Print to print from that device directly.
    Please give me the steps to correct this once and for all.  This is my third HP and I'm starting to regret this purchase.
    Thank you.

    Hello ctphd ,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer keeping a wireless connection to the Mac.
    I do have few suggestions that we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I have also located a document that deals with when the Printer Does Not Maintain Wireless Connection.
    Try these steps first and if you are still having an issue, write me back and I will be happy to assist further.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HT1977 My Computer crashed so I have had to download iTunes all over again. The problem is now I can't sync my Apps to my iTunes. It doesn't let me arrange them or anything when plugging my iPad in. The screen is greylike and won't let me select anything

    Hi Guys,
    My computer crashed and I lost everything. I got a new one and downloaded itunes all over again. When I plug my ipad in even after authorising my computer it will still not let me edit anything on the ipad. The screen is grey like on the ipad section and i cant select an app or anything. I have transfered purchase apps but all it does is take movies and tv shows accross. It wont transfer the apps into itunes. Please help

    As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
    That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
    Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
    https://discussions.apple.com/thread/3305461

  • When i plug the USB for my iPad into my computer it will connect then disconnect over and over again untill i wiggle the usb around alot. This is happening to all my ports. But not on the other computer.

    Hi. Whenever i plug my iPad (Happens with ipod and iphone too) to my computer usb for itunes is will connect, then disconnect over and over again. It has happened for a long time but doesnt happen on my other computer. how do i fix this?

    If you have a spare cable, try using that.  But the fact that this doesn't happen on your other computer (I assume using the same old cable) leads me to conclude that something else is at work.  Maybe even the "bad" computer.

  • Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

    problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

    problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

  • Data acquisition time not continuous, but starting over and over again

    Hi,
    My data acquisition time is not continuous but loops over and over
    again.  Could someone please take a look at my vi to see if you
    have any thoughts on how to fix this.  Also, I tried to set up my
    vi so that I could take the mean of the signal at any time I
    choose.  However, at the same instance that the data acquistion
    time "starts over" again, the mean is calculated (before I trigger it to take the mean)
    I have attached my vi and my output file as a text file so that what
    I'm trying to say will (hopefully) make a bit more sense. 
    Thanks for your help in advance!
    Sherri
    Attachments:
    Datalog1 71805.vi ‏1252 KB

    Hi,
    Thanks for responding to my question. Attached is the vi with added
    comments as to what I think I am doing.  By DAQ time, I mean the
    first column of data that is in the data file that I attached
    previously.  I am only simulating a signal (at the beginning) so
    that I can program in my office.  I do, however, have the same
    problem as stated above when I change the simulate signal to DAQmx
    using my instrument.
    I hope this clearer.  If not, I'll try again. 
    Thanks so much!
    Sherri
    Attachments:
    Datalog1 71805 83.vi ‏1228 KB

Maybe you are looking for

  • How do i give money from one account to another.

    I put a gift card into the wrong account ( I still own it though. ) and I want to know how I can put it into my new account. Thank you, if you need more info, please ask.

  • My Satellite P30 stops untimely

    Hello, I've got a Satellite P30 since 2004 and it is good. But since a few month, when I run a lot of applications simultaneously, or when I run applications that needs a lot of RAM or UC ressources (like games or a or anti-virus in complete analysis

  • CS5 jQuery Code Hinting

    I'm messing around in DW CS5 and I'm trying to get coding hinting to work for jQuery. I setup the standard function $(document).ready(function... But now hinting. I even try ctrl + space but only get the standard javascript code hints. Do I have to s

  • Calender Control in Developer 9i

    Immediate reply requested please. I want to call the builtin calender control in the date field. How can i use it or from where i get the calender controle builtin is there any option in 9i or not? Please immediate reply

  • Shortcut to open RAW image directly into Photoshop

    Isn't there a keyboard/mouse shortcut that will allow someone to open a RAW image from within Lightroom directly into Photoshop...and in the process, bypass the 'Edit Type Options' dialog (i.e. Edit Original; Edit Copy with Lightroom Adjustments; Edi