TC joined network, but computer can't connect with TC

Easily got the TC up and running, successfully joined my existing wireless network- a solid green light. But when I tried to activate Time Machine, I keep getting the message "Connection failed- The server "xxxx" may not exist or it is unavailable at this time."
I waited a while, tried again. Same thing. Then I unplugged the TC, rebooted, and restored the factory settings on the TC. Again, successfully rejoined my wireless network. But got the same message.
I'd appreciate any thoughts....thank you very much

The Time Capsule performs no routing functions at all when it is configured to "join a wireless network". Therefore, the ethernet ports are not enabled.
In effect, when configured to "join", the Time Capsule simply becomes a wireless backup device and nothing more.
You might want to restart the entire network to see if the Time Capsule becomes available. You should be able to open the Finder and see the Time Capsule under the SHARED heading if it is successfully joining the network.
Message was edited by: Bob Timmons

Similar Messages

I connect on the wi-fi network but i can't connect in internet

i connect on the wi-fi network but i can't connect in internet

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Mac Pro 10.6.4 - I can SEE the Windows network, but I can't connect!

So I have a brand new Mac Pro dual 6-core machine in the design department of our company, and it's sweet. However, this is one of two Macs on an all-Windows network, and we're newly having some trouble.
Until recently, I could (on our iMac running 10.6) see and connect to our network with no trouble, sign in to my personal folder, etc. Now, however, the IT guys just updated the servers (and I don't know the configuration, or even what specs are critical to know), and while I can still SEE all the network drives, I can't connect to them, no matter what I try. I've tried different workgroups (which show up in my WINS Network preferences), I've tried adding search domains, I've tried using Connect To Server... with smb:// addresses and also browsing through the drives and connecting that way... I'm always told either that there was an error connecting, the server/share doesn't exist, that my login credentials are wrong, etc.
I know that I am using my proper username and login for the servers, I know that the names of the shares I'm trying to access are correct... but something is amiss here and I have no idea what it is. Is there something that needs to be done on the network side of things that I don't know about? (I'm sure more info about the network setup would help in this regard). Is there anyone who is dealing with this same issue?
Please help me with the benefit of your experience and knowledge... we need to get our Macs up and running... or we'll be stuck on Windows machines forever!
Thanks in advance,
Matt

mh, that's really hard to solve because it's probably something the IT guys did with the network.
only a few hints:
if connecting via "connect to server", try to use IPs and not computer names, so smb://xxx.xxx.xxx.xxx instead of smb://server1. also, don't add the name of the share directly to the adress. just type the IP and you will see all available shares.
secondly, mac OS seems unable to connect if the user on the other computer does not have a password. I suppose your users do have passwords, but just to be safe.
other than that I can only imagine it being a problem on the windows side, blocking the mac or something. macs don't always see PCs in their network automatically, but the "connect to server" approach never failed on me. of course I'm only in a small home network

I can connect to a network but I can't connect to internet...

Hi! I have a rarely problem:
When I try to connect to a wireless network I can and it shows that I have a high signal on the menu But I can't connect to the internet or it runs very slow... The macbook says that I'm connectet to the internet :S. I try to connect from windows XP with bootcamp at the same network and it runs very fast... What's the problem?? Thanks!
Sergi

Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
Wireless Mode: Create a wireless network
Wireless Network Name: <enter a desired Network Name or SSID>
Radio Mode: <leave the default or select a desired radio mode>
Channel: Automatic
Wireless Security: <select the desired wireless security type>
Internet > Internet Connection
Connect Using: Ethernet
Connection Sharing: Distribute a range of IP addresses
Internet > TCP/IP
Configure IPv4: Manually
IP Address: 10.0.1.1
Subnet Mask: 255.255.255.0
Router Address: 10.0.1.1
DNS Server(s): <leave blank>
Domain Name: <leave blank>
Internet > DHCP
DHCP Beginning Address: <leave default or change to a desired starting address>
DHCP Ending Address: <leave default or change to a desired ending address>
Advanced > Logging & Statistics
Allow SNMP (unchecked)
The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

After trying to set up access control, my Airport Utility is no longer able to find my Base Station. My PC still sees my wireless network but I can't connect to it.

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control. Following the prompts, I entered my IP address, and then my Airport stopped working. I tried uninstalling it and reinstalling it, but got the same thing. The screen I get is that "Airport Utility was unable to find any Airport wireless devices", and askes me if I want to rescan. When I rescan I get the same message. My Airport light is green and my PC recognizes the network, my software just can't connect to it. A friend suggested I entered the wrong IP address (which I found on my computer under "connections", but even after I tried a different one which is supposed to be from the network, I still get the same error message. What am I doing wrong?

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control.
This could be bullsh!t on your friend's part perhaps? Do you ever recall seeing a blue-light on the base station?
Following the prompts, I entered my IP address, and then my Airport stopped working.
The acces control list is where you put in your Mac Address, this is not the same thing as an IP.

I can see other Macs on network, but I can't connect via afp, smb or Bonjour

Hello.
I have a Mac Pro running 10.6.8, a Macbook Pro running Lion, an Ipad 2nd generation and an Iphone 4. All the devices "see" each other, but I am unable to establish a connection.
For instance: I can see the other mac in the finder, but a connection can't be made neither via clicking or using command + K
I can see my iTunes libraries in the remote app, but it wont connect to the iTunes library. Same with iChat: in the Bonjour network both macs see each other, but no message is delivered.
However, I can connect to the harddrive, that is connected to my airport extreme. Previously I thought my router was the problem, but now I exchanged it with this airport Extreme.
In another thread I read something about adding 10.0.1.* to "Bypass proxy settings for these Hosts and Domains" in the network proxy settings, but this did not help. Although I am not sure if I entered it right.
Any ideas how to resolve this problem?

Hi,
Please turn off the Windows Firewall in the Control Panel for test:
Control Panel->type firewall in the search box->Windows Firewall->Turn Windows Firewall on or off->Turn off
Windows Firewall (not recommended)->OK
Then Make sure all computer
turn on the network discovery.
Also, apps that are managed from non-domain servers cannot see or control this Windows 7 machine
In addition, make sure the Server, Windows 7 and other comouter in the same network. Otherwise it can't be accessed each other.
Karen Hu
TechNet Community Support

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Computer's can connect to wireless but I can't connect with e-book and i-pod

I have a wrt54g I can connect with 3 laptops and 1 desktop but my ebook and ipod connects once and a blue moon please help

Whats the Wireless settings you have setup on your Router (SSID, Channel, Security Mode)? Are you getting any error message when you are trying to connect to your wireless network?
If you have setup WEP security on your Router, when you are trying to connect to your wireless network input the "$" sign before the WEP key and then click on connect and then check if you are able to go online or not.

Computer can't connect with firefox

Cannot get firefox to work on either of my computers. when I try to open, it says it can't connect. Internet Exployer works fine.

This is normally an indication of a Firewall blocking Firefox. For details on that and other possible causes see [[Firefox cannot load websites but other programs can]].

Tnsping ok, but sqlplus can't connect ora-12154

Hello All, I have installed on my linux the 10.1.0.3 oracle client and I can do tnsping to my tnsnames.ora databases but I can't connect with sqlplus... I have an error: ora-12154
I have readed metalink documentation and I think everything is ok, but still can't connect... :( Can anybody help me please?
Here is some extra data:
-My env vars are:
ORACLE_HOME=/home/j0nuntu/OraHome_1
TNS_ADMIN=/home/j0nuntu/OraHome_1/network/admin
TNSNAMES=/home/j0nuntu/OraHome_1/network/admin
-My tnsnames.ora:
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.53)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TEST)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.249)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLE)
As I said, tnsping to test or oracle is ok... tnsnames.ora is in the correct path and there it has 775 perms on it. What can be happening?
Thanks in advance.

Also, make sure it is using the correct tnsnames.ora file.
Do you have multiple copies of this file in different directories?
post the contents of your sqlnet.ora file as well.

HT1178 Do I want to create a new wireless network or join my current network? I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine. I have read other forums, but in each case they instructions eventually do not apply.
I have connected my TC to my existing wireless router. This sits in a bedroom and cannot be moved as a rental home.
I have plugged in the TC and updated the software.
Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network.
Thinking C. If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
Or do I want to create new wireless network - first set of questions - choice A? What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
Please help and quickly! Thanks!

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

HT3819 I can use remote on my iPhone to connect with my iTunes library, but i can't connect to another computer using home sharing to access apple tv. I have used the same access ID and password that is used for the apple tv.

I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house. I am using the same ID and password that the apple tv uses to connect with the other computer. Also how do I check what version of IOS that my iphone is using?

Version:
iOS Settings>General About (or it'll say when you hook it up to iTunes)
Are all the devices on the same physical network? I think you're saying all are set up using the same home sharing credentials.
If you've not done so restart all devices and your router.
If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
Does the other computer have any firewall or port blocking software running?

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

TC joined network, but computer can't connect with TC

Similar Messages

Maybe you are looking for