TC loses DSL connection on occasion, but defintely at 10:05pm every night

I'm experiencing "hiccups" in my connection. Many of them are random, but for the past 3 nights, at 10:05, the TC has lost my DSL connection and then picked it back up 1-2 minutes later. There's the obvious culprit of the DSL company, but I also wonder if there might be settings in the TC that could contribute to this. Any ideas?

Xian,
Just a stab in the dark, but try the following:
Launch Airport Utility.
Select your TC on the left.
Click "Manual Setup".
With "Airport" selected in the toolbar, click the "Access" tab on the far right.
What is selected for "MAC Address Access Control"?
Also, are there any wireless devices with their MAC addresses listed in the pane below?
If so one of them might be the Mac in question. Try removing it, clicking "Update", and seeing if that makes any difference.
Otherwise, it may be that an electrical event in the home is created a spike at that moment in time. Do you have any timed events going on in the home at that time of night? Maybe sprinklers or other automated devices coming on or off?
Cheers!

Similar Messages

  • Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night

    Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night but my iPhone 5 and Mac mini still connects to the same wifi network I have called apple support and they had no clue what the problem is, have tried changing the http settings to auto and resetting the network setting on the iPad but no luck so far would appreciate any help thanks josh

    One possibility is that there is an allowed time period for access programmed into your WiFi router for the MAC address of your iPad.
    What make, model, and version WiFi router do you have?
    Another possibility is that you are getting some WiFi interference from a nearby WiFi network which is automatically turning on at 9:30 PM. A nearby home security system could be the culprit.

  • GT704-WG loses DSL connection

    My GT704-WG loses its connection to DSL about Once a week. A power cycle fixes it, but when it drops in the middle of a huge HD upload or a CoD match it is extremely aggrivating.
    My network is setup like this. GT704-WG with non-Verizon firmware in Bridge mode to a Belkin F5D7230-4 v1444 running DD-WRT v24-sp2 (09/30/09) micro - build 13000M VINT Eko Firmware. Wirelessly connected to a Mac, a PC, an iPhone and a Kubuntu Server.
    When the DSL goes down the DSL light on the router goes out and slowly flashes. Accessing the web portal for the modem, the status says disconnected and clicking Connect does nothing. A 15 second power cycle fixes the problem and the internet is back.
    Any help would be great.

    In your modem combo, get the modem status and post them.
    If you have no idea of what I mean, show a screen shot from the modem combo.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Remote app on iPad connects to iTunes but then loses connection.

    Hi,
    Basically, I can get the app on my  iPad to connect to iTunes, but if I then start doing something else on my iPad, or my computer goes to sleep, then the remote won't connect again. Even if I wake my macbook and try to connect it again.
    If I press 'add an iTunes library' in the remote app, nothing appears on iTunes.
    To solve the problem, I have to restart my computer.
    I just checked to see if my iPhone connects and it worked straight away. Maybe its a problem with my iPad?
    Can anyone suggest anything?
    Oscar

    I too have this problem and made it worse. Under Mavericks and iOS7 everything set up very easily and worked beautifully like Apple stuff usually does. Then a couple of weeks ago I took the dive and updated to Yosemite, iTunes 12 and iOS8 and then I would occasionally lose connection with my iTunes library as described by the second poster. Very aggravating. So I made a bigger mistake and deleted the library from my iPad Remote app and whenever I started it up again it would say 'Add a device'. I clicked and a randomly generated 4 digit number appears with the exact instructions: 'To add an iTunes library, open iTunes on your computer and choose Remote from the tab bar'. I went to iTunes and searched EVERYWHERE for this Remote tab bar and could not find it. I then went to iTunes Preferences: Devices and clicked the button 'Forget All Remotes' thinking this may reset something in iTunes and make the Remote tab appear somehow to start from scratch. Wrong! Now there is absolutely no connection between the Remote app on my devices and iTunes on my computer.
    Can anyone point me to this Remote tab in iTunes?? If I can find that then I think I should be able to fix this.
    Geez, talk about effing up what should be (and was) a very simple app.

  • I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please help!

    I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • AE works fine, connected to internet but AE Utility loses base station

    three computers are connected, one with ethernet cable (1st gen iMac G5) and two wirelessly (1st gen MacBook Pro and 17 in iMac Core Duo 2)
    All three have connectivity to web but the amber light is flashing and NONE of three computers AE utility can find the base station. Earlier today they could, nothing has been restarted. Furthest is 5 meters away and all have max signal strenght.
    Do they lose connectivity from AE to base when they sleep and cannot get it back?
    Any ideas

    How long ago did you set up your wifi system? When you set it up did you replace and existing Airport wifi system? And, if you did, you should have named it something different than the original system and use a different password.
    Make sure that you are using the Airport Utility from the disk that came with the 802.11n Extreme and not the old Airport Admin Utility.
    When there is wireless connectivity and the amber light is flashing that is usually because no level of security was set when the system was built. The problem is that the new Airport Utility could help you by telling you why the amber light is flashing, but since you can't scan for the base station you can't get to the base station summary tab to check.

  • When I switch on my iPad, it shows a connect to iTunes picture. Have tried to re-boot on several occasions but no change?

    when I switch on my iPad, it shows a connect to iTunes picture. Have tried to re-boot on several occasions but no change?

    Sounds like your iPad is in recovery mode.
    Follow these instructions to resolve:
    http://support.apple.com/kb/HT1808

  • I have music in icloud but the ipad "loses the connection"

    I have music in icloud but the ipad "loses the connection".
    The music is loaded onto my imac and I want to be able to access it from the ipad
    The only way I can do this is to sync with the imac.  This does not use the icloud as I thought.
    The library shows on the ipad but it does not play.

    - If it happened after an iOS update try:
    Fix for “No Content” on iPhone & iPod after iOS 4.2.1 update
    - Next try resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Then try restoring your iPod via iTunes.  First from backup and then to factory defaults/new iPod.  Then resysnc.

  • I lose wireless connectivity when I connect the nano to my PC

    I have a DSL modem connected by ethernet cable to a Linksys wireless router. My PC has USB linksys antenna. The wireless connection works fine except when I plug in the Nano, it takes about two seconds and I lose the connection to the router. If we are in itunes downloading it is suspended. If we are on the internet the next click and the Microsoft "you are not connected to the internet" page comes up. To reestablish the internet connection I have to remove the nano and reboot the PC. Needless to say this is very frustrating.
    If I reboot with the cable attached I get an error unable to run an ____.exe that I believe is the antenna setup because the linksys monitor stays gray in the startup box.
    I have tried to move the antenna to a different USB port on the PC with no luck. Everything else runs fine.
    Does anyone out there have any ideas/fixes? - Your assistance is greatly appreciated!

    thanks deggie for your answer.
    I had my ipod with autosync off ... I set it "manage like disk" .
    I try to recover the music with 2 programs: "ephod" and "copy trans" ..
    I can see all the songs listed, but can´t backup to disk or recover them......  
    I see than my ipod hasn´t the folder  "ipod_control" , which appears before I had this problem....
    Any idea ??? Thanks again.

  • Connecting printer to TC makes me lose internet connection

    When trying to connect my Canon Pixma MP550 to the Time Capsule, I encountered a mysterious problem: I can print from my MBP via TC but I am losing the internet connection (the DSL light on my ADSL modem starts to blink and the AirPort Utility says that there is a problem with the PPoE connection.
    Anyone having the same problem? Any help would be greatly appreciated!

    I have discovered that the problem was probably not related to the printer (even if other USB devices like memory sticks work when plugged in the TC). When trying to do a faster Time Machine backup and connecting my laptop to the TC with an Ethernet cable, the same thing happens - my modem loses Internet connection. Very curious, and to the date noone has been capable to find a solution...

  • Mac loses WIFI Connection...

    I just start experiencing this problem since I moved to a house with some DSL router but never experienced it when I was using my own NetGear router with a cable connection. My Mac loses its connection every once in a while and I have to turn off WIFI and select the router again. Since I am the only one having the problem people will say its my Mac, but I am not sure. Perhaps because I am living in a city with about 15 other WIFI networks around my be the problem as before I was living in a more isolated area with only a few WIFI networks.

    Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

  • Computer dsl connection after router hookup

    I am very confused.  Have a home computer with dsl connection.  I went thru the CD directions and hooked up my wireless router.  Everything seemed fine, but when I went to go to the internet (aol mail, etc.) my dsl connection was gone.  I lost my dsl connection.  Couldn't get ANY help at the 800 tech support.  So i unplugged the router wires and put everything back the way it was.  Then I could get dsl connection, and went to the online website 24-hour support.  Told them everything that happened, and all I got was "I am sorry for the inconvenience", then silence.
    Why do I lose my regular dsl connection after I hook up the wireless router???  Am i doing something wrong?  HELP!

    Hey try resetting the router reset button in such a way that power
    light is blinking on the router & then do a complete network power
    cycle i.e., unplug the power cables from the modem & from the router &
    then plug in the power cable to the modem first once all the lights are
    solid green you could plug in the power cable to the router & check out
    it will definately work!!
    Configuration for DSL connection:-
    Before doing the following steps, you have to connect the modem to the
    router's Internet Port and the computer to the Ethernet Port Number 1.
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    ===================================================================
     Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
    Try going online
    If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
    Click save settings....
    Look for WAN IP address again under status page ...

  • Time Capsule losing DSL connection

    I have the following problem: my Time Capsule loses internet connection every 2-3 days. It is connected to the internet via D-Link DSL-300G modem, and I have several wireless devices that connect to the TC. I am quite sure that the problem is with the TC and not the modem.
    Basically, every 2-3 days, the wireless devices suddenly cannot find any web-sites anymore and just show "Looking for ..." message when trying to load a web-site, but they remain connected to the TC wireless network. The light on the TC remains solid green, and the lights on the modem indicate that everything works properly.
    Restarting the TC through the AirPort utility from my laptop does not help. The only thing that works is to disconnect and re-connect back power to the TC.
    Before the TC, I was using a Linksys wireless router with the same D-Link modem without any problems.
    The TC settings in the AirPort utility are as follows:
    Internet Connection
    Connect Using: Ethernet
    Ethernet WAN Port: Automatic (Default)
    Connection Sharing: Share a Public IP address
    TCP/IP
    Configure IPv4: Using DHCP
    NAT
    Enable NAT Port Mapping Protocol is checked
    I appreciate your help.

    Welcome to the discussions!
    You already have all of the correct configuration settings for the TC, so there are really no other options in this regard.
    +I am quite sure that the problem is with the TC and not the modem.+
    In that case, you're only option is to try a replacement TC to see if that will perform better for you. Apple may likely ask you to connect your computer directly to the modem for a few days to see if you have any connection difficulties with that type of configuration.
    If you do, then the modem may be showing its age or the service providers cabling to your house may need to be repaired or replaced. If the connection remains stable, then you have a strong case to ask for a replacement TC.

  • Verizon DSL connection drops over and over again

    My DSL connection constantly drops and reconnects. It started over a week ago and has gotten worse. Today it in unbearable. The drops are random, sometimes I can stay connected for 30 minutes before it drops, othertimes I'm connected for less than 5 minutes before it goes out. I'm not talking about lost connection from a wireless device to the modem. The DSL and Internet lines go out and I lose my connection completely, for a few minutes while it reconnects. I've seen several people on this forum and others talk about the same issues. Is there any way that I can fix this or help diagnose the problem?
    I've tried the normal stuff: restarted the computer, unplugging the modem for 30 seconds, checking the cables, I even replaced the phone line from the wall to the modem.
    I have a Westell D90-327w15-06 reg. G modem/router.
    Any information will be greatly appriciated.

    Contact tech support and try to get them to run a noise margin test on your line. Most dropped DSL connections are caused by a marginal connection to the central station. I don't know what speed your line is provisioned for but in the case of a distance problem to the central station provisioning the line to a lower speed will provide a more reliable connection. Good Luck  

  • DSL connection getting worse by the day

    For the last several years, we have been having connection issues with our DSL internet. Typically, these issues are present in the summer months, and by mid to late October they correct themselves, and we have normally functioning DSL throughout the winter months. Not so this year. For the last month, our connection quality has been continually declining. We now have to reset the internet constanty thoughout the day. It goes out for minutes or hours at a time. For instance, it has been out for the last hour, and the Internet light on the D-Link DSL2750B router has been out. I rebotted, as well as disconnecting and then rebooting, to no avail. At other times, both the Internet and DSL lights are lit, but the WLAN light blinks very fast and steadily, and will not connect.
    We have had several tech visits over the past few years, although none this year as yet. The last tech to visit changed out tier in the central box a few blocks away, and out service has been very poor since. However, as stated, it has gone dramatically downhill in the past month, or so. We generally do not have service for several hours per day. There is no real rhyme or reason to when this will happen, or the current weather conditions. We lose connection rain or shine, hot or cold. I've worn a path between my computer and the router! Please let me know what I can do address this situation. I have spent countless hours over the past few years on the phone with tech support in India, and an not interested in repeating the experience. We've had issues long enough now that I know rebooting, etc, isn't going to fix anything.

    Hello Theresa100
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

Maybe you are looking for

  • How do I gracefully handle XamlParseExceptions?

    If a control that is dynamically loaded as part of a template has an error, it causes a XamlParseException which crashes the entire application. I can hook into the Application.DispatcherUnhandledException event, but setting Handled to true on the Di

  • ITunes 10.5 is using more and more memory untill it crashes

    iTunes 10.5 on my windows xp computer starts using 132MB of memory. When I add data to an app on my iPad2 (for instance adding my comic book collection) iTunes uses aprox. 10 MB of memory to get 1 comicbook to my iPad2. Every time I add an new comicb

  • Accessing the server on my own machine when off the network

    I want to access the server on my own computer from my own computer, but I can't seem to do this unless I'm connected to a network. In order to access localhost, I have to contact my own computer through my router, which seems unnecessary (especially

  • Multicube query

    Hello all, I have 2 issues that i am facing with multicubes. 1. We have a sales order cube which is being fed from 2ODS sales order header&item and the other being sales order schedule line. When i run the query i want to see only one line with the d

  • Question about setting guitar levels

    Hi, I'm new at Garageband so bear with me. I just bought an Avid Recording Studio Fast Track USB interface to hook up my guitar. It's got 3 knobs on the top- Mic Gain, Guitar Gain and Output. (Mic Gain is for the XLR input, Guitar Gain for the 1/4 in