TC new firmware and xbox 360 wireless adapter

So there is a new firmware for TC...it is ver 7.3.1. Any with the new firmware has tested the connectivity of TC wth the xbox 360 wireless adapter?? I don't have access to it now so I am hoping someone of you have tested and to share the success story??

**** IT!! I just tested the connection...no luck! When the **** is Apple going to fix this problem?!!!! I now regret getting rid of my AEBS for TC!!!!!!

Similar Messages

WRT54G version 5 and Xbox 360 Wireless Controller

Hello,
I just upgraded to the latest firmware since my Xbox 360 Wireless adapter can't connect to my router. I still have the same problem and can't figure it out. I read some of the other posts, and opened up the correct ports in my router 88 & 3074. I even disabled wireless security and I still can't connect.
My wireless adapter is a solid red. I can connect just fine with a wired network cable. Does anyone have any suggestions for me to try?
It's a brand new Xbox too and there shouldn't be any problems with it.

Make sure the wireless settings are configured correctly. Also check with the adapter.

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Airport extreme connecting with xbox 360 wireless adapter problems...help!!

Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

WRT350N compatibility with XBox 360 wireless adapter

I just installed a new WRT350N - all my computers connect just fine - my XBox wireless adapter will not connect. Is there a compatibility issue?

Make sure that your wireless security is not set to WPA2. The XBOX 360 wireless adapter does not support it. You need to use WPA or WEP.
EA6500 - v1.1.27.144156
WUMC710 - v1.0.00
SE2800
AE3000

Configuring an XBOX 360 Wireless adapter to Airport

How do you configure an XBOX 360 Wireless adapter to your Airport. I've Been trying to connect to xbox live but have been having trouble doing this.

You have connect 360, right?
http://www.nullriver.com/products/connect360
If so, I think you have to change the default security from WPA to WEP (or vice-versa) in order to make it work.

Wrt54g and xbox 360 wireless gaming adapter

First post here and I have a problem. The WRT54G has wirlelss disabled. It is connected to a WAP11B wireless access point which is connected in 802.11b mode to a laptop, Wii, xbox 360, iPhone. The router is connected to a dsl modem. Three wired ethernet computers are connected. And I am running WEP with 128, and I changed the SSID to something other than linksys.
I'd like to change to use the WRT54G as a wireless enabled connection. Then remove the WAP11B, and put a pcmcia 802.11g card in the laptop and connect the xbox360 with a microsoft xbox 360 wireless gaming adapter which should connect at 802.11g.
The problem is the xbox 360 displays a message that there are duplicate networks using my SSID. Is there someway to upgrade to 802.11g without getting that error message on the xbox 360? Let me know if there are any questions I can answer in order to more clearly explain the problem.
Thank you,
Jordan
Solved!
Go to Solution.

Did you try to change the SSID...If not change the Network SSID and try...

Xbox 360 wireless adapter for windows 8.1.

would the xbox 360 wireless receiver adapter work with windows 8.1. because i'm having a problem that my controller keeps getting disconnected for no reason.

Hi,
Regarding your problems about not connecting the controller to the adapter, I suggest you replace the batteries or recharge the battery pack.
Meanwhile, I would like to verify if the controller is recognized in Device Manager. How about changing different USB ports?
Please reinstall the latest driver of the receiver adapter and the controller from Microsoft.
If the issue persists, I would recommend you to contact Xbox support for further assistance.
http://support.xbox.com/support/en/us/nxe/contactus.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WRT54GX4 Wireless Router and Xbox 360 Wireless Networking Adapter

I just got an Xbox 360 with a Wireless Networking Adapter. The adapter will recognize the network, but won't connect to it. Even if I remove the security, the Xbox 360 won't connect. Is there something else via the router I'm supposed to be doing? I called Microsoft and they said to open the port settings, but I don't know if that's really the issue and I don't know how to do that if I need to.
The ports they gave me were:
TCP 80
UDP 88
UDP 3074
TCP 3074
UDP 53
TCP 53
Thanks for any help if you can.

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Xbox 360 Wireless Adapter and WRT54G

I can only squeek out one (red) bar of signal on my xbox 360 when it is only two rooms away (with open doors and few walls) ...
Are there settings on the 54G that will boost the wireless signal?
Not using any encryption ...
Any suggestions?

There is no setting to "boost" the wireless output. However, changeing some settings may get you a better connection.
Make sure you are using a unique SSID. Do not use "linksys". Also, be sure that "SSID Broadcast" is set to "enabled". Broadcasting a unique SSID will help your Xbox find your router and lock on to its signal.
The router usually works better if it is raised several feet off the floor. Try to position the router and the Xbox closer together, with as few obstructions as possible between them. The router antena should be vertical. Do not place the router behind monitors, or other computer equipment -- get it out in the open.
Try setting the router to a different channel. Channels 1, 6, or 11 usually work best. Check out your neighbors and see what channel they are using. The channels overlap, so try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, use any channel 1 through 4.
Eliminate any interference from other 2.4 GHz devices, such as wireless phones, wireless baby monitors, wireless keyboards and mice, Bluetooth (including Bluetooth game controlers), and microwave ovens. Even some 5+ Ghz phones use the 2.4 GHz band. Unplug these devices and see if that improves your connection.
Another thing that should help would be to use a high gain antena on your WRT54G, for example, the Linksys HGA7T.
Ultimately, for the best gaming experience, a wired connection usually works best.
Message Edited by toomanydonuts on 04-10-200703:47 PM
Message Edited by toomanydonuts on 04-10-200703:49 PM

Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
how can i stop this? also, how can i find my IP address?
since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
FYI---the airport express was purchased in april, so i believe it is the new "n" model.
thanks for all your help.

Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
Message was edited by: Gino Zevallos

WRT54G - How do i make my router find my xbox 360 wireless adapter?

Can someone please help me? My wireless adapter is not getting anything. My ipod gets wifi from the router but no my xbox.

All you need to do is forward ports on the router for XBOX-360 you got from the XBOX provider for the assigned static ip address & do the complete network power cycle & you will be able to play the games wirelessly!!!

New APe and XBox 360

Has anyone managed to get these to work wireless together?...
My Old Base station had no probs setting up using wep and playin nice with my 360...
got the new Base Station rigged up exactly the same way...set it so it works all 802 freq
but my 360 doesn't see it...wont connect even if i put it in as if it was a hidden network.
anybody able to advise?..cos otherwise this mac users gonna have to go back to my old Base Station and the new ones going back to the shop!!!

yeah actually ive just found em..managed to get the 360 to see the APe but still wont connect...

Airport and using a xbox 360 wireless

I want to convert to the apple world and a airport network. I am 99% there.
I have been readin many post's about xbox 360 not working on airport networks, i was woundering can you use a AirPort Express unit and hard wire in to the 360. so it would work like a wireless bridge.
Has any one tired this or hard wired a non wireless computer like this?

John Knowles wrote:
Hey I think, I just responded to this same topic in the Airport Express forum (?)
Anyway, I was going to post this as a sticky on the topic but this seems as good a place to put my info. I have an XBox 360 hardwired into my Airport network, works great. Here's my setup:
1. Main access point: Time Capsule 500GB (upstairs) plugged into Time Warner cable modem. Set to Wireless N, b/g compatible.
2. Bridge: Airport Extreme N base station (downstairs), extending my wireless network.
3. XBox 360 plugged into the downstairs base station via Ethernet cable.
4. TivoHD also plugged into the base station. Not important to this discussion, just to show that it works (and that it's nice to be able to hardwire all your AV devices).
Set your primary base station to be extendable, then configure your second base station as a bridge by allowing it to extend your primary network. Easy. Plug in the 360 and it will configure automatically, no need to go through all the PAINFUL configs when using wireless.
Just for the record, I also tried:
1. XBox 360 wireless adapter and my Time Capsule: would only work when I set my Airport network to "B only" mode, which is pretty useless. Stopped working altogether after I swapped wireless adapters and tried to switch back. I think it's a piece of junk, and the XBox's wireless setup could use an overhaul.
2. Linksys G Game Adapter: worked briefly with Time Capsule, then stopped working. Created it's own ad-hoc network despite being told not to. Can only setup using web utility on a Mac. Also a piece of junk.
**Final advice: if you have Time Capsule, do yourself a favor and buy an Express or another base station and hardwire your Xbox 360. You'll save yourself a lot of headache. An Express costs close to what an XBox wireless adapter costs anyway, so it makes more sense to go this route.**
Haha, you're a **** genius. I was going to buy a new n-compatible Airport Express anyway (been borrowing my mom's old Express thus far) – aaand I just got an Xbox 360. And also, by doing it your way, I will only have the power cord and the ethernet cable from the modem to my Time Capsule‚ all other devices (iPhone, MacBook Pro, PS3) will connect wirelessly, and the Express will do the same, and since its current position is like 1 meter away from the Xbox 360, this was truly one of my all-time highlights of a forum-solved problem...
Thanks!

[SOLVED] Xbox 360 Wireless Controller, how to make it work?

How can I get this to work under Arch? the controller gets detected at /dev/input/js0 and I if cat the file I get a bunch of symbols (which I read that means it works).
However, I can make it work with anything, am I missing something?
It even gets detected as: Bus 004 Device 003: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter
The light on the controller keeps blinking but thats normal also.
If anyone can help out with this I would really appreciate it.
thanks for the help
Last edited by 655321 (2013-01-14 20:14:29)

Already read that but didn't help. However I found the problem. Controller wouldn't sync with the wireless receiver. I ended up using xboxdrv userspace driver and after sync it worked like a charm, even the xbox light stops blinking and stays fixed on the player 1
thanks for the help

TC new firmware and xbox 360 wireless adapter

Similar Messages

Maybe you are looking for