TC not found after reboot (and other problems)

Hi there,
After I have gone through the Airport utility to setup my new TimeCapsule (TC) as router (connected with a DSL-modem), Airport utility rebooted TC, but then an error occurred, saying TC could not be found after reboot. This is the last in a series of strange behaviours and occurred directly after I reset TC to factory settings.
I also had tried adding TC to an existing network. This appeared to work (no error message, green LED). However, I could not select TC as TimeMachine's backup drive. TimeMachine did find TC, asked me for the password and verified the password, however immediately switched back to the status "not configured".
Any ideas? Thanks in advance
-mat

Dear fellow sufferers,
it is solved! I decided to wait with a return and meanwhile the solution in another thread. All problems went away after I turned all security off from my network (do do this, I had to temporarily connect my TC by wire). This may be related to the fact that I am using a slightly aged PowerBook (latest Titanium model). Using fixed channel instead of automatic further accelerated the connection.
Well, it is not really solved since I want to use some security in my network, but I suppose that will come with the next Leopard update (Cupertino, do you hear me!!!????).
...Cupertino, do you hear me!!???

Similar Messages

CS6 photoshop not found after downloading and putting in serial number

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!

Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me!

Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!

check your duplicate post. there are two responses.

Could Calendar services not available after reboot be LDAP problem?

I followed this installation guide:
https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
However, when I reboot the server, Calendar service is unavailable.
Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
cd /opt/sun/directory/bin
./dsadm create /var/opt/sun/directory/dsins1
./dsconf create-suffix "0=isp"
Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
Then, I ended up running to get it set up:
./dsccsetup ads-create
./dsccsetup war-file-create
$ ./dsccsetup cacao-reg
./dsccsetup status
Then, it looked like the dcss agent is registered in cacao.
So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
cd /opt/sun/directory/bin
./dsadmin stop-domain domain1
./dsadmin start-domain domain1
However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
After reboot, I run these commands to get the server up and running:
Start GlassFish server:
cd /opt/sun/SUNWappserver/bin
./startserv
Start web ( Messaging Server I think ):
cd /opt/sun/comms/messaging64/bin
./start-msg
Start LDAP ( Directory Server )
cd /opt/sun/directory/bin
./dsadm start /var/opt/sun/directory/dsins1
Start Mysql
cd/etc/init.d
./mysqld start
All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
Some of my steps were out of order. Cleaned them up so it is easier to understand.

Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
=========================
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend> JDBC JNDI Name = jdbc/ischedulebackend
SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
======================
Does that look like an LDAP issue to you?
"Fatal Error: All LDAP servers are down."
Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
Changed one server address

Error message of "404 - page not found" after downloading and installing Firefox 15

Error message of "404 page not found" after downloading the latest version of Firefox.

This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

Price not found after replication (and after loading stacks)

Good morning,
The system was working until we have uploaded the stacks 19 and 20 to ECC system.
We created a new condition type and when we created a sales order we modified the bdoc changind the condition type used in CRM for the one in ECC. So we replicated the sales order with the price of the products in CRM (not in ECC).
After loading the stacks the sales order is being replicated but the price is 0. The standard condition PR00 is not found (the one we put in the bedoc), so the system goes to the material in ECC where there is not price and take 0 as the value of the sales orders.
I don't know if I should write a note to SAP or if there is another way to fix it.
The configuration is the same as when it worked.
Thanks and regards.

hello experts,
I have realized that when the sales order is created the price is not replicated but if I modify the sales order, the price is correctly replicated.
If you can help me I'll be very pleased.
Thanks and regards

Acrobat (pro) 9 not working in safari and other problems

i have several problems with acrobat pro 9.0.0:
1) i installed acrobat pro 9 but when i go to "help" menu i get message: "there was a raise without a handler. the application will now exit" yet all other menu's function well.
2) when i try to open a pdf file in safari i get the spinning wheel and nothing happens.
this is what i did till now:
1) uninstalled acrobat pro 9
2) repaired permissions
3) re-installed acrobat pro 9
installed reader 9 but als getting the message: "there was a raise without a handler. the application will now exit"
btw i have mac os 10.5.5 and all latest apps installed.
any help is very much appreciated

okay problem solved !!!
i just used cocktail 4.1.5 to clear and delete all kind of caches. than i rebooted and everything is okay again.
cocktail is from: http://www.maintain.se/
so the problem is with some obscure caching

Windows 8.1 wifi not working after sleep (and other various bugs)

Hello Apple support forum, this is my first post!
Alright, so I just switched to my first mac. MBP Retina late '13. I bought it primarily to run windows, and to also of course use OS10.
My issues in bootcamp however are getting annoying. My Wifi shows up as connected after I resume from sleep, but my mac won't let me disable wifi, enable airplane mode and then re-enable wifi, nothing. The only way to get wifi to work when resuming from sleep is to reboot.
I just set hibernate when close lid on all my power modes, and basically disabled sleep for now. Hibernate works fine for now, but sleep is much faster from resume and also I'm not sure if the machine will wake up from a simple tap on the keyboard or opening of the lid, I think I have to actually boot it all over again anyways.
My other minor but still annoying issue is my titles of windows in windows are showing up as black (screenshot here)
the only other thing I was curious about was the dual-gpu functionality. I know from reading these forums it's probably not possible because of the hardware and software mesh apple created for OSX and their dual-gpu design, how it wouldn't really work in windows. I'm just wondering if anyone ever got this to work in windows maybe on the older retina MBP or older macs, or if anyone is making progress on trying to fix that in windows? I bought this laptop expecting that to work, even the geniuses at the Apple store said it would be possible, I was misled and might have second-gussed buying a 3k machine if it would only get a few more hours battery than my old Vaio. I bought this machine primarily for battery life.
I'm just remembering another tiny tiny issue. When I plug headphones in the headphone jack in windows, it doesn't automatically switch to that audio output, I have to manually do it in audio settings, is this a bug, have I configured something incorrectly, and is there a fix?
One other thing is my dpi settings, I have it set to a larger font and everything because at stock it is SOOO tiny. my question is, is there any way to smooth out text in other apps, my browser and apps like rdio look like crap unless I leave the dpi settings stock, which I basically need a magnifying glass to use (I tried that for a week lol. Not the magnifying glass tho haha)
I know I'm rambling at this point, but in the windows 8.1 camera app, sometimes my camera does this bug where it flips between inverted and normal, extremely quickly, so it looks like there are two of me. I don't know if this was GPU drivers tho, because just reinstalled those this morning and it seems to be ok so far.
also, the keyboard. I miss my context menu key, what do I need two command keys for? A right alt button, I'd rather have that be the other control button. Any way to remap these easily? what about switching Fn with control on the left, I prefer my windows button in the exact corner.
last question tho, I saw people overclocking gpu's on their retinas from last year, can you do this on the new retinas, and can you overclock the cpu as well as the gpu?
I do have to say this in the end, I am a little dissapointed with apple, I was told thst my mac would run windows like a native windows machine. I know windows 8.1 is not supported, but coming from PC's for years, and being a PC technician, I also go to school for computer engineering, I expected everything to "just work" as steve jobs once said. Well, it doesn't just work. I even had these issues in windows 8, which is supported.
Installing windows 8 was a nightmare. I had to use the forums, try for weeks to get windows 8 to finally instll the proper (uefi) way, and to get everything usable, I had to reinstall my os's twice.
Apple, if you are going to advertise a mac that can run windows "seamlessly", you need to get these major issues fixed, support all new versions of windows before they are even release, and release proper hardware drivers and support software before new hardware is released. All other Windows OEMS are pretty much required to do this to stay in business. I don't dislike OSX, I just use windows for everything I can't use Mac for, so please fix this. You're better than this, you should put a higher standard on this. otherwise, don't advertise macs that can run windows.
Thanks guys, sorry for the information overload. BTW, MBP Retina 15" 16GB RAM 512 SSD, 2.6 haswell, pretty much the max specs other than the SSD.

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

Opened Finder windows are NOT remembered after rebooting and have to be re-opened again manually. For me this is very annoying and is a major bug!

If other software products can keep their opened windows after the system is rebooted, why not the finder? This did work for many, many years now and I can only hope that this issue somehow has been overseen by Apple (although it's a very obvious flaw) and will be repaired with the next Update for Lion (which otherwise is working very, very well for me).

I am using XP, Firefox 17.0.1 and the latest version of flash. Have
automatic updates and installs. Everything was working a few months ago and
then just started clearing everything out all by itself. No settings were
changed. There are some sites now such as my bank that do not even put
anything in the panel, like before. Other sites I used do not even request
to be allowed or denied. I can still use the sites that request space, but
as soon as I leave the page, everything is wiped out. I need to find
something else that actually works all of the time, unlike Adobe.

Opened Finder windows are NOT remembered after rebooting and have to be re-opened again manually. Very annoying and obviously a major bug!

If other software products can keep their opened windows after the system is rebooted, why not the finder? This did work for many, many years now and I can only hope that this issue somehow has been overseen by Apple (although it's a very obvious flaw) and will be repaired with the next Update for Lion (which otherwise is working very, very well for me).

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

IPod not recognized by computer and other problems

I have a 3rd generation iPod. When I try to charge it, a folder comes up with an exclamation mark in it. I tried to follow some of the steps on the site, but it didn't seem to work.
Also, when I try to connect the iPod to the computer, it just does not register at all. Probably once out of like five times it might.
The new updater doesn't work, it can't mount the iPod. But I guess that's a part of because it doesn't recognize the iPod on my computer.
Also, the iPod is stuck in Disk Mode, which I think would help the iPod be recognized and whatnot. If I reset the iPod, it just goes right back into diskmode.
Please help

This is pretty much my problem. It is ******* me off. Does anyone know what to do?

Lion InstallESD.dmg not found after download and install on my macbook pro; I need it for built a install-dvd

I want to built a install-DVD from Lion. The finder doesn't find the *.dmg-file from Lion on my MacBook Pro. Who knows a solution? How can I download the Install-Image again wthout to update my Notebook with Lion again. In the appstore my purchase is marked with "installiert". If I click with the right button to get another option for a download - no command.

I've tried your suggestion to sporty54 but, when I Option click the purchases icon in the App Store, it only shows my other installed items as here:-
I don't know what 'MAS' refers to. Is this another place on my iMac where I should look and, if so, where is it?

I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

TC not found after reboot (and other problems)

Similar Messages

Maybe you are looking for