TC oldest and latest backups are same date--won't backup current date

My oldest and latest backups are the same date (21DEC10) --when I enter TC--the only backup I have is for 21DEC--help!

UPDATE: After quite a few attempts, I concluded there is an issue in SL with TM backups to a password protected Airport Disk, so I reverted to using the Airport password.
What was odd during all of this is that when I was using a disk password, I could mount the disk (and the sparse images) from both my iMac and my UMBP, and TM would work from the UMBP but not the iMac. This was despite my deleting the TM plist, restarting, disconnecting the disk from the Airport extreme.
When I reverted back to using the Airport password, I did it from the iMac. TM then worked fine from there, but not the UMBP. It took a combination of restarts, selecting None as the TM disk, and I don't remember what else to get the UMBP backing up again.
So, in my case at least, the Mac that changed the PW type worked fine, the other one either never worked or required hoops to work. Other than that, kind of lost, but I do have it working at least.

Similar Messages

  • Why does my TC no longer tell me the date of my Oldest and Latest Backups?

    When I go to Time Machine Preferences, all I see next to "Oldest Backup" and "Latest Backup" is "---". For the first several months, I was told these dates. (It does tell me when the "Next Backup" will happen.)
    Why did my Time Capsule stop telling me this information?
    How do I make it tell me this information?

    I assume you've tried a reboot of your Mac and TC? This will force the Mac to consider the TC backup "untrustable" and do a full check of it against what's on your Mac.

  • Time machine suddenly says "none" for oldest and latest backups

    I recently upgraded from OSX 10.6.8  to 10.8.3.  Was also away for several weeks, so lots to back up at once.  Says it's backing up, but hasn't registered any new backups since I've returned.

    lauriedono wrote:
    you referred me to suggests. I had  changed the disk I think in my efforts to check that it was still set up right- that would explain, as it said, that TM would say "none" , not recognizing prior backups. Hopefully it will once it backs up fully.
    Yes.  When you select a new drive, or re-select the same one, it doesn't look for the dates until the next backup completes normally.  (On earlier versions, it would show a couple of dashes, but Apple "improved" it  .)

  • Is  Creating a Custom Component and Custom UIComponent are same in Flex ??

    Hi ,
    I am getting confusion in the terminology of words  with respect to Custom  Components .
    Please let me know whether  Creating a Custom Component and Custom UIComponent are same in Flex ??
    Because i have created some  Custom Components based on Form Container based on my business screens .
    Does they both Custom Component and Custom UIComponent mean the same ??
    Please tell me .
    Thanks in advance

    There seems to be a little confusion here. Think of it this way:
    A basic UIComponent by itself is not visible; you can add something you can see to it to make a visual custom component. For example, a ComboBox component is a UIComponent with a ComboBox added to it.
    The UIComponent is the lightest weight component available from which you can create other components. I use it as the base for custom components that the user cannot see, like a data manager.
    HTH,
    Carlos

  • Is statspack and awr report are same?

    Hi
    All,
    Is statspack and awr report are same? and in which oracle version they are?
    Thanks,
    Vishal

    I wouldn't expect AWR or statspack to be able to generate snapshots or to run reports while the database is in restricted mode. I've never tested it, but I wouldn't expect it to work.
    Restricted mode is not normally used to allow normal users to test a database. Normally, if you're upgrading a production database, you have already validated that the upgrade works correctly by upgrading and testing the dev, test, and potentially staging databases. So when it comes to upgrading prod, you do the upgrade, verify that the upgrade scripts didn't throw any errors, and open up the database for users to do some quick validation. If there is some fear that users logging in would "mess up the database", that implies that you don't have enough confidence in the upgrade to even think about upgrading prod.
    Occasionally, you'll have a standby database that gets upgraded and opened up and a select number of users given information on how to connect to the new database. Those users would verify the new database and then some sort of switchover would take place to move everyone from the old system to the new one. That generally requires a lot more work, though, because you have to replicate data during the parallel production phase.
    Justin

  • Ipad and ipad mini on same account won't facetime

    Ipad and ipad mini on same account won't facetime.  Already added different e-mail account but to no avail.

    After you added the new email address, did you select it in Settings>FaceTime>you can be reached by FaceTime at? You have to select that email address and unselect any other email address or phone number in there that is currently being used.

  • Time Machine does not display Oldest or Latest Backup details

    I had previously posted this but had no luck (or replies)...
    Shortly after the most recent Time Capsule software update, I had an issue where Time Machine stopped working. I was getting a"Backup volume cannot be found" message.
    As per Apple's instructions to remedy this, "Time Capsule: Time Machine backups do not mount" (http://support.apple.com/kb/HT1170), I re-named my Time Capsule to a shorter name.
    Shortly afterward, I noticed that details were missing for "Latest Backup" when I'd click the Time Machine icon in my menu bar. All that is displayed in this field is " -- ". I have also noticed that when I open the Time Machine Preferences window, the details are missing from the following fields: "Available", "Oldest Backup", & "Latest Backup". (However, when a backup is in progress, space details are shown in the "Available" field.)
    I expect the missing details have something to do with changing the name of the Time Capsule, but have no idea how to fix this... Please help.

    Installed Snow Leopard, and, for whatever reason the missing details are now there. Yay.

  • Max delay and Min delay on same data path

    Hello, 
    I am trying to set up timing constraints (both max and min delay) on a data path between two combinatorial elements. 
    I use set_max_delay -from [get_pins pin name] -to [get_pins pin name] 6 -datapath_only 
            set_min_delay -from [get_pins pin name] -to [get_pins pin name] 4 
    I checked the timing report and I see that the max_delay constraint is satisfied but the min_delay is not.What can be the reason behind this? 
    Also, when i comment out the first line (max_delay constraint), I see that min_delay constraint is satisfied. 
    Can't a datapath have both max and min delay constraints?
    Any help will be really appreciated. 
    Thanks! 
    -Kamath 

    Be very careful about trying to set max/min delays on a portion of a path (i.e. not from a valid startpoint to a valid endpoint). Doing so is called path segmentation. When you do so, the max/min delay gets applied to the portion of the path you specified, but the rest of the path (between the startpoint and the set_max_delay -from and from the set_max_delay -to to the endpoint) are no longer constrained at all.
    There are extremely few reasons to want to do this. I second the question "Why do you want to do this?"
    That being said, you can set both a max and min delay on the same path (or path segment, if you insist on segmenting the path). The set_max_delay overrides the setup requirement, and the set_min_delay overrides the hold requirement. If the two values are too close together the tools will not be able to satisfy both; all timing checks are done at both process corners (max PVT and min PVT) - the ratio from max to min is generally around 3:1, so if the set_max_delay is less than 3x the set_min_delay the tools will be unable to satisfy both (due to real, physical limitations).
    Avrum

  • List of usernames and password who are same

    Hi,
    I have created several user with the default password same as the username. They are suppose to change their password. But Some of them have not changed their password.
    Now, I want the list of those database users who has the same password as thier username. How can I find it??
    I really appreciate if you help me.
    Thanks,
    Api

    Why don't you create some temporary db links using all username and same password as usernames. Then whichever db link allows you to select the data will be the one having same password. Following scripts with some tweaking might be helpful
    --creating db links
    begin
    for rec in (
    select * from dba_users where username NOT IN ('SYS','SYSTEM') --exclude other system users
    loop
    execute immediate 'create database link '||rec.username|| '_lnk connect to '||rec.username ||' identified by '||rec.username ||' using ''<DB_ALIAS>''';
    end loop;
    end;
    --printing usernames where username and passwrod are same
    declare
    v_name varchar2(100);
    begin
    for rec in
    (select * from dba_db_links where db_link like '%lnk')
    loop
    begin
    execute immediate 'select global_name from global_name@'||rec.db_link into v_name;
    dbms_output.put_line('This link uses default username and password '||rec.db_link);
    exception
    when others THEN NULL;
    end;
    end loop;
    end;
    Regards,
    Nitin

  • Whether E5620 and E5-2650 are same "CPU type" from replication point view?

    Our product supply both HP X86 G7 and X86 G8. G7 use E5620 and G8 use E5-2620. We have two servers installed with Timesten instance. One timesten instance is active and another one is standby. There is DB replication between two DB instance.
    This kind of configuration requires that the two servers have same "CPU type" based on following:
    "The master and subscriber databases must reside on machines that have the same
    operating system, CPU type, and word size. Although you can replicate between
    databases that reside on the same machine, replication is generally used for copying
    updates into a database that resides on another machine. This helps prevent data loss
    from node failure."
    Then, whether the E5620 and E5-2650 are the same "CPU type" from timesten point view ? Can we establish DB replication between two severs with E5620 and E5-2650 ?

    Yes, these are considered the 'same' they are both Intel Xeon CPUs. The key things are CPU architecture and endianness.
    Chris

  • Is business area and industry sector are same.

    Hi All,
       is company code  is related to industry sector in any way??? 
    is industry sector related thro business area then, or  is business area and industry sector are one and the same.
    Thanks
    Sathsih

    Dear Satish,
    Business Area - Organizational unit of external accounting that corresponds to a specific business segment or area of responsibility in a company. Movements in value entered in Financial Accounting are assigned to business areas.
    Financial statements can be created for business areas for internal purposes.
    The definition of the business area organizational unit is optional.
    Business areas are used in external segment reporting (over and above company codes), based on the significant areas of operation of a company (for example, product lines, branches).
    To define business areas, choose the following in Customizing for the Enterprise Structure: Definition -> Financial Accounting -> Define Business Area.
    If you have defined business areas, the transaction figures for the G/L accounts are managed separately for internal evaluation purposes. You can therefore create internal financial statements for business areas.
    If you want to create financial statements for business areas, you must make sure that the Business area field is ready for input in all the line items. To do this, proceed as follows in Customizing for Financial Accounting: Financial Accounting Global Settings -> Business Area -> Enable Business Area Balance Sheet.
    To post items in a business area, enter the business area when you enter the business transaction. However, the business area can also be derived from other account assignments, such as the cost center. To enable the system to do this, you must define the business area in the cost center master record.
    If you enter a cross-company code document, you can post to different business areas across all company codes in one document. As a result, any number of combinations of company code and business area are possible.
    Industry Sector - When you create a material master record, you are required to classify the material according to industry sector and material type.
    The standard system contains the following industry sectors. The ID used to identify the industry sector internally appears in parentheses.
    ·        Plant engineering and construction (A)
    ·        Chemical industry (C)
    ·        Mechanical engineering (M)
    ·        Pharmaceuticals (P)
    The other sectors are for retail.
    Regards,
    Naveen.

  • Is SAP SCM 5.1 and SCM 2007 are same? Please Confirm

    Hi,
    I have to Install SAP SCM 5.1 Non-Unicode System, but I cant find Installation Media at Marketplace instead I can find SCM 2007. I am able to get SCM 5.1 SPs when I clicked SCM 2007 entry on Marketplace. So please confirm whether these 2 products are same or not?
    If yes, Please provide a link/ note that shows SCM 5.1 has renamed to SCM 2007 from SAP.
    Thanks.

    Hi Ajay,
    SCM 5.1 & 2007 are the same.
    Please follow the link
    https://websmp110.sap-ag.de/support
    under Release & upgrade info > installation & upgrade guides
    Regards
    R. Senthil Mareeswaran.

  • How do you upgrade CC Indesign so home computer and office computer are same version?

    I have CC for my office computer, and also put my home computer on it so I can work from home. I did some work over weekend, and came to office computer and it could not open files. It said my files (made at home) were Indesign 7, so I needed to save down in order to open at the office. Shouldn't both Indesigns be the same on Cloud? I updated my office Indesign but it still says it InDesign 6. How could my home computer have InDesign 7? What do I do?

    Hi missbeulah2000,
    To add on Kglad, both Indesign 8.0 and Indesign CC can work simaltaneously.
    If Indesign CC shows as Up to Date on your office computer then try the steps mentioned in http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Thanks!
    Ankit

  • Same field on Header and Item level with same data

    Hi Experts,
    I want enter value in WEB UI Header level Screen filed and the same value I have to see in same filed which has added to item level WEB UI Screen. Is Same field on Header and Item with data copying functionality supports by the CRM WEB UI?
    Thanks in Advance
    Edited by: sakthidharan acc on Jan 31, 2012 10:25 AM

    Hi Leon,
    can you please explain me how can i read the value of parent entity and make it appear at the item level?
    Please help me in this regard
    Its urgent.
    Iam the beginner , so that is the reason iam asking many questions , please help me
    Thanks and Regards,
    Sak

  • Is there any delay in application loading time, if i define properties which are same data type separately

    Hi guys,
    If i define the parameters(almost 40 parametes) in the app.xaml.cs page as like below ,then will there be any delay in application loading ?
            public static bool isfromentities = false;
            public static bool isjobformtomodify = false;
            public static bool isworkactionform = false;
            public static bool isattachmentform = false;
    Is it better to define the parameters like below.Please let me know is there any delay in application loading
    public static bool isfromentities = false, isjobformtomodify = false,  isworkactionform = false, isattachmentform = false;

    I believe there is zero difference between declaring the variables individually and declaring them in one statement. The compiler should be smart enough to produce the same compiled code regardless.
    IF there is any difference it would be so small as to be insignificant. I think someone with more experience could confirm if the compiled code is identical or not.
    Declaring variables in a single line is less readable and manageable. I never do it. If you do want to do it I'd suggest only combining variables that are directly related into the same line, e.g.
    bool positionX, positionY;
    int counter, counterTwo, counterThree;
    I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Maybe you are looking for