TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

I have a dell laptop and a mac book air, both connected to my TC. Transferring files is a joke. I am a novei mac user. How can this slowness issue be fixed for both the pc and mac? As I am writing this, i am currently doing a software update on my macbook air, getting 10.5.3 now. Does this solve it?

Similar problem here.
iMac using 802.11n to connect to time capsule. Time capsule configured to use 802.11n (b/g compat), and WPA/WPA2 security.
Typical transfer rate (file transfer from imac to tc) of about 2Mbps. After reboot of the TC, speed can sometimes hit 6Mbps.
I have played with the security settings. After a softboot with new config:
- no security, 802.11n mode: 12Mbps throughput
- WEP security, 802.11n mode: 8Mbps
- WPA/WPA2 security, 802.11n mode: 6Mbps
Enabling interference robustness seems to have little or no effect.
All of these speeds are significantly lower than what I'd expect.
No other devices were on the wireless network during the testing.
I've read that alot of others are having similar issues. I suspect that most of these devices are running extremely slowly, but most people aren't bothering to check throughput.
Would love to know if there is a real fix out there. 802.11n should be much much faster than this. If I could reconfigure the TC to use 802.11g, I would.

Similar Messages

Which protocol we should use for file transfer in ios ?

which protocol we should use for file transfer in ios ?

My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

Hi Recently i have upgraded developer 6i by applying patches.
After when i am trying to submit active users and active responsibilities.
Those also getting completed
But when i am trying to click button view output or view log
I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
Can anybody tell me what is the issue. Waiting for your reply
Ganesh

I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

Slow Transfer Speeds For File Transfer Manager 5.0 Build 0032

I have a 20Mbit internet connection. When I download from the Microsoft download site I can get files downloading at reported speeds of up to 1.7 Mbytes per second.
When downloading from the TechNet Benefits section I have to use the Transfer Manager and I can only get speeds that vary between 30-80 Kbytes per second. Rarely any faster.
I am using XPPro & IE7 straight out onto the Internet via my router / firewall. No proxy server.
What can I do to speed the process up or bypass the File Download Manager?
Regards.

Thanks for your feedback Tekky. FYI there is also a forum specifically for TechNet Website Feedback which is the more appropriate place for TechNet Subscriptions questions at http://social.technet.microsoft.com/forums/en/tnfeedback/threads/
There are many suggestions in this post about improving your network speeds when downloading from MSDN and TechNet subscriptions sites. Here is one more place to look for tips, which we have linked to from our Downloads and Product Keys FAQ (MSDN version, TechNet version):
The website for the Microsoft File Transfer Manager, particularly their troubleshooting page which includes additional discussion on configuring the FTM and on slow transfer speeds.
As Julie stated above, you can call TechNet Customer support and they can take you through some additional troubleshooting and diagnostic steps to assist. Julie has linked to the support phone numbers in her reply.
Thanks,
Mike Kinsman

New to MacBook - slow LAN file transfer problem

My new MacBook is painfully slow when wifi-ing to my house LAN.
I turned in my old G4 iBook for a MacBook (2GHz C2D, 2GB, 10.4.9, all updates). I have a LAN that consists of a wired 1G Ethernet backbone (a Mini and a Powermac G5 are wired in) and a Snow AEB that provides 802.11g wifi access to the LAN. The wired LAN connects to a D-Link GB Ethernet switch so the wired systems can exchange files fast. The switch connects to a D-Link EBR2310 router that connects to a cable modem to ComCast. The router has the latest firmware (1.05, it's an 'A' version router).
The Mini, G5, and MB are static IPs on the LAN. The D-Link router passes out DHCP addresses >100, with addresses <101 reserved for static LAN IPs. I use static IPs for network reliability when recovering from power outages and other unforeseen glitches. The LAN has worked very well in this configuration, with fast file transfers among machines and good stability.
With my old 802.11g G4 iBook, I was able to watch DVDs that are stored on an external FW drive connected to the Mini. No stalls, no pauses, no dropouts - MenuMeters showed an average throughput of about 700KBytes/sec on the iBook when viewing a DVD. I used both VLC and DVD Player with good results.
With my new MacBook, I can't view my DVD files. 802.11g network transfer rates to the MB (indicated by MenuMeters and by Activity Monitor) vary rapidly from a high of about 1.1 MBytes/sec to 20 KBytes/sec. Movies stall, skip, etc.
Simple file copies from one system to another are also much slower with the MacBook - an average of ~100KBytes/sec vs. ~ 1.5 MBytes/sec with my old iBook. In short, the MacBook is dog-slow in file transfers from the other machines compared with my old iBook when using the wifi connection, with no change to the network infrastructure in going from the old laptop to the new. I would like to fix this.
My AEB is set up in bridge mode (simple access point) with WPA2 security. All three Macs are completely current with latest updates, as is the Snow AEB. The MB has 4 bars of signal strength. Slow file transfer problem does not change when moving the MB to or from the AEB.
Curiously, when I download a large file (like the Intel 10.4.9 combo update), the MB shows a steady ~800KBytes/sec download speed, with none of the speed variation it shows with file transfers from either the Mini or the G5. File transfers to/from the MB to either of the other Macs are very slow.
Both the Mini and the G5 have Airport cards: when I switch them from wired Ethernet LAN to wifi LAN, they transfer files between each other at ~ 2MBytes/sec - about what you'd expect from an 802.11g protocol. So the slow file transfer doesn't seem to be due to the AEB, it seems to be specific to the MacBook. When I connect the MB using its hardware Ethernet port, files transfer just as fast as the other systems.
I have tried these measures, without effect on the problem:
- power off/restart of every component in the system;
- changing the AEB to an open network mode;
- changing the MB from static IP to DHCP;
- toggling IPv6 on/off;
- running no applications other than Finder on all systems;
Activity Monitor on the MB doesn't show anything sucking up CPU cycles during file transfers. I have plenty of RAM. The only thing I've changed in the network is the swap of the iBook for the MacBook.
Can anyone suggest what else I can try to make acquisition of this nice shiny MacBook a step forward, rather than a step back? Thank you!
G5 DP 1.8, Mini CD1.83 GHz, MacBook C2D,2GHz Mac OS X (10.4.9)
G5 DP 1.8, Mini 1.83 GHz, G4 iBook Mac OS X (10.4.8)
G5 DP 1.8, Mini 1.83 GHz, G4 iBook Mac OS X (10.4.8)

Hi,
Did you want to use the Live Migrations for that?
We recommend that you configure separate dedicated networks with gigabit or faster speed for live migration traffic and cluster communication, and these networks should be separate from the network used by the management operating system, and from the network
used by the virtual machines.
For more and detail information, please refer to:
http://technet.microsoft.com/en-us/library/ff428137(WS.10).aspx
Regards.
Vivian Wang

Painfully slow startup - any suggestions how to make it faster?

Hi Everyone,
Just thought I'd ask people - my 17" iMac G5 1.9GHz PowerPC with 512MB ram is painfully slow at start-up. Seems to take forever! Does anyone know how I could clear a lot of rubbish from my computer and someone make it faster.
Would anyone recommend a complete re-install - would that improve speed?
Any help appreciated, cheers,
Mark

Mark, you can clear space on your drive and speed it up by moving a lot of sound and video files to a DVD, or even better, to an external; Firewire drive that you can partition and also use as a clone boot disk.
Go through your applications folder and look for stuff that you never use, then get AppZapper to remove all traces of them. You can also use Monolingual to remove the tons of extra languages installed with Word and OS X, just make sure you uncheck English and any other language you might use.
Hope some of this helps,
Miriam

Plz hel for file transfer using zmodem protocol

someoe plz help me. i have to devlop an application that transfers files betwn 2 pcs(both ways) using dial up connection, further it should autodial the connection at periodic times.
i am trying to use Zmodem file transfer protocol. i succseed in sending string (for test)using my sender program with hyper terminal open on the other hand. it prints the string. but when i use my receive program, similar to given in samples(simpleread.java) it doesnt work.
actually when the ring comes from the sender how to send command to modem to hang up and connect to the calling pc if there are any such commands then plz help.
----sameer

someoe plz help me. i have to devlop an application
that transfers files betwn 2 pcs(both ways) using dial
up connection, further it should autodial the
connection at periodic times.
i am trying to use Zmodem file transfer protocol. i
succseed in sending string (for test)using my sender
program with hyper terminal open on the other hand. it
prints the string. but when i use my receive program,
similar to given in samples(simpleread.java) it doesnt
work.
actually when the ring comes from the sender how to
send command to modem to hang up and connect to the
calling pc if there are any such commands then plz
help.
----sameerU ddnt abrvt nuf. I r3r1t 4 U.
Sum1 plzz hep m3. i 1/2 2 dvlop app taht xfer fil betwn 2 pcs(bth wys)...

Alert Configuartion for File Transfer

Hello,
I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
Thanks.
Regards,
Mayank

Hi,
With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
Refer
XI : How to Re-Process failed XI Messages Automatically
XI : How to Re-Process failed XI Messages Automatically
XI: Alerts - Step by step
The specified item was not found.
For successfull messages there will not be the alert notification available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
Thanks
swarup

8900 to imac bluetooth connection for file transfer

Hello, I have a brand new curve 8900 javelin and a new IMAC. Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects. Can someone please tell me how to overcome this problem?
thank you

That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

Arch just got painfully slow (for the third time)

arch has slowly been getting slower bit by bit, but I let it slide for a while. started up my laptop today and everything is painfully slow. Pacman takes a couple minutes just to retrieve new update lists, yaourt takes minutes before displaying anything, when I start X/Openbox it's about 5 or 10 minutes before I can even right click open a menu. Yesterday, I was opening up GIMP in a matter of seconds, but it just took about a minute or two to load. Can't imagine this'd be a hardware issue because the laptop is a few months old and hasn't had any problems - other OSes on the drive load fine and all. My / partition is ext3 and has a bit under 1GB of free space - I didn't realize how much space I needed to distribute everything when I formatted everything and I've been meaning to repartition the drive. Is there any chance that could be what's slowing down my computer so much?
Last edited by sa (2008-10-02 03:40:47)

[sa@psd ~]$ mount
/dev/sda7 on / type ext3 (rw)
none on /dev type ramfs (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
none on /dev/shm type tmpfs (rw)
/dev/sda5 on /boot type ext3 (rw)
/dev/sda8 on /home type jfs (rw)
/dev/sda1 on /ntfs type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096)
[sa@psd ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 8.0G 6.5G 1.1G 87% /
none 1.9G 0 1.9G 0% /dev/shm
/dev/sda5 43M 17M 25M 40% /boot
/dev/sda8 55G 4.2G 51G 8% /home
/dev/sda1 100G 39G 62G 39% /ntfs
[sa@psd ~]$
How can I measure disk activity?
Something else must be happening because even the bash prompt at startup after logging in takes a little while to show up. I'm not sure what to do
Last edited by sa (2008-09-25 00:56:29)

Bluetooth - any hope for file transfer in near future???

Hi,
Presently iPhone 4 does not allow bluetooth file transfer to other mobile devices and even my PC.
I am not interested in illegal music/video transfer but genuinely transferring my data files between pc and other mobile devices and use it like a mobile storage device. I don't like the idea of mailing my file and then downloading it again when I have both devices in my hand! It's not helpful when other devices do not have internet connection or limited internet usage.
Please let me know if apple policies would allow it to make file transfer possible in near future (except music and video). Otherwise it would greatly reduce its usability for me.
*I hate its file storing and transferring features.*
*Another reason for hating iPhone is 'Flash'.*
Apart from this, its simply superb.
agmad

Hoekstes wrote:
Why is something so simple its available on 10 year old Nokia 3310 bricks not available on an iPhone. Its ridiculous.
Because there is nowhere to put the files on an iPhone. There is no common file storage area on an iPhone that all apps can access. Each app sits in a sandbox for security purposes. Each app can only access its own files. You would have to have an app running where the files would go, and then the files would only be available to that app.
The old Nokia has a common file area and does not have the security the iPhone does, but then 10 years ago you probably did not need the security.

Imaging Multiple Computer - Slow Boot File Transfer

When imaging say 15 computers, the SCCM 2012 boot file transfer is slow. Is this normal or some setting that needs to be set to fix this? Thanks.

If you are running R2, do you have this fix applied?
http://support.microsoft.com/kb/2905002/en-us
You can also try to adjust the TFTP block size to speed it up.
http://support.microsoft.com/kb/975710/en-us
Or you can try to use multicast to speed up many machines. I'm pretty sure it only applies to OS and not the boot image.
http://technet.microsoft.com/en-us/library/hh397406.aspx
Best, Jacob I'm a PC.

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
<b>import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;</b>
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

Similar Messages

Maybe you are looking for