TC starts to restore then stops - Pls Help!

The hard drive in my early '08 MBP died the other day, so I switched it out for a new one. After hooking up the new HD I put in the install disc, ran disc utility, erased the drive, which set up a partition, and restarted. I then picked a language and went to back up from Time Capsule.
It saw and connected to the TC. It started restoring, and got to about 2%. The screen then flashed and it asked me to pick a language again. It never completed the restore. This has happened twice so far. Anyone else have this issue? More importantly, anyone know how to resolve?
I know all my files are on the TC as I can retrieve them from my other Mac.
Thanks for any help.
-anthony

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Similar Messages

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated

Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated.
iMac-Mid 2007 MacOSX V 10.7.5

maybe this will help:
https://discussions.apple.com/message/19032230#19032230%2319032230
https://discussions.apple.com/message/19107160#19107160

At night, as soon as I plug my iphone to be recharged, my iphone starts behaving abnormaly. It is like somebody has taken control of it. I see the screens moving, music starts playing and then stopping, etc.

At night, as soon as I plug my iphone to be recharged, my iphone starts behaving anomaly. It is like somebody has taken control of it. I see the screens moving, music starts playing and then stopping, etc. I have noticed that several nights. What I do is in Settings is to change into Plane Mode, thinking that, may be if I do that, somebody that has taking control of it will not be able to download data. Yesterday night, I was awakened by an alarm, whose setting I did not changed. When I looked over, the alarm screen changed to Settings and the Plane Mode changed alone in front of my eyes, from on to off.
I have not observed such a situation during the day. Only when I plug the cable.
I suspected that may be there is no Trojan installed. May be the cable, which is a spare cable, has been modified by a hacker, and it has electronics installed in the connector. But tested with the original cable, and the behavior was the same, as described above.

Thanks Meg for your reply.
It could be that both cable are bad. But, anyway, you would not expect any of these manifestations, even with a bad cable. I had bad cable for my 4s, and never saw such a thing!
I contacted by chat the support of Apple. They told me that this behavior could be a software problem and recommended me to do a full recover of my iphone. That meant, putting in at the factory conditions and recup all the data from the backup. I did that, and the behavior did not change. The backup was made with the data of my PC, not icloud. Tomorrow will try with icloud and check if that will work.

I am running Windows 7 64 bit and can't get the store to load. It starts to load, then stops?

I am having real problems with itunes. I have loaded the latest version of itunes on my windows 7 64bit computer. When I try to connect with the store, it starts to load, then stops! What am I doing wrong?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

HT201272 This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?

This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?

Try going to Settings>Store and sign out and sign back in.
It also could be due to an Apple server problem. and yu will just have to wait and try again.

I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Java Web Start- Cannot launch Application. Pls help

HI
Ia m beginner in java web start. I creaate a simple swing application and try to launch it through web start. But I failed. My application jar file (sample.jar)contains only class files. No menifest file. Then I sign my "sample.jar" file and placed inside tomcat server: "webapps/root/WebStart/Sample". I also placed the "sample.jnlp" file in the above directory.The name of my main class is :"Sample" .Here is the content of sample.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+"
codebase="http://165.231199.164:8080"
>
<information>
<title>Sample Launching Test</title>
<vendor>FMO</vendor>
<homepage href="www.sun.com" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.2+" />
<jar href="/WebStart/Sample/sample.jar"/>
</resources>
<application-desc main-class="Sample" />
</jnlp>Whenever I try to launch this application from the browser , it shows me following :
An error occurred while launching/running the application.
Title: Sample Launching Test
Vendor: FMO
Category: Unexpected Error
RED
Anybody pls help me here about how to Launch my application. Am I missing something?

I fixed the porblem by modifying the sample.jnlp file. Here is the latest version:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase=http://[my-ip-address]:8080/WebStart/Sample>
<href="sample.jnlp">
<information>
<title>Sample Launching Test</title>
<vendor>FMO</vendor>
<homepage href="www.sun.com" />
<description>Demonstration of JNLP</description>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version=1.4+ />
<jar href="sample.jar"/>
</resources>
<application-desc main-class="Sample" />
</jnlp>

Ipod 4g needs to be restored...pls help!!!

how to fix this error? "iTunes has detected an Ipod in recovery mode. You must restore this ipod before it can be used with itunes"
pls help!
thanks!
Ipod touch 4g

Thanks! my ipod is running again...yey!!!
First, i did the manual reset and then restore it through iTunes. good thing is i have the back-up and now its syncing!
Happy me! Thanks for the help

IPhone won´t restore! *URGENT PLS HELP*

Hi!
I really need your help guys. I am abroad and can not get my iPhone to repair for a long time, so I am hoping you can help me solving this problem here! My iPhone started acting up this morning: when I turned it on, it showed me the connect to iTunes screen and the emergency only calls slide. I restarted it a few times, took the sim card in and out to no avail. I then connected it to iTunes and forced a restore, also in DUF mode. The restore never completes as I get the 1013 error. I followed all steps on article TS1275 , again to no avail. I don´t know what else to do! The iPhone is now stuck in restore mode. Please help if you can!

I activated and bought the iPhone in Italy. I am italian and have now moved to Denmark. I had a previous iPhone 3G, also bought and activated in Italy last year and have never had a problem with restores. And yes the computer I use is the one authorized to the iPhone. The error I get is 1013, which I understand happens when you are trying to downgrade the iphone firmware, but it is certainly not my case as I am trying to restore it with the latest firmware.

The ipod can`t be restored. error 1415 pls help

in itunes my ipod isn`t shown.. i tried the reset utility, and sais that an error ocurred. after that itunes pop`s up and want`s to reset the ipod. i hit reset and after a couple of seconds it shows me the " the ipod could not be restored. an error occurred (1415) " What can i do in thes situation.??? pls help me anyone.. e-mail at: [email protected]
AMD Windows XP Pro

http://docs.info.apple.com/article.html?artnum=304508

My itunes store home loads fine but when i try and press redeem it will start to load then stop and go blank. what should i do?my itunes store home loads fine but when i try and press redeem it will start to load then stop and go blank. what should i do?

My itunes store home page opens just fine and i can search music and evrything but when i press the "redeem" button it will begin to load then stop and go completely blank. what should i do?

I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps

I cannot access my apps through wifi or data usage.After tapping the screen it will start to load then stops.

I cannot access my apps (candy crush or fb) through wifi or data useage. It will start to load then returns back to the home screen.

Answered in your other thread - you only need to post once.

I can't listen to then entire 1minutes 24 sec of song in stores, can listen only 17 seconds and the song stops. pls help

Dear Sirs
Could you help me!! Since yesterday when I am in the iTunes stores for purchasing new songs, I always listen to the song. It give me about 1minutes24 seconds for listens, but since yesterday I can only listen to the song for about 17 seconds and it stops. Before this situation I was listen to a song and I got a little square window with the word URL written in and a stop, since nothing was happening I click the stop so I can eliminate this little window.
After my action I can't listen to any song in the iTunes Stores for only 17 seconds.
Could you let me know what I should do.
Thank you very much for your help
salmafromva

Follow the huge discussion here: https://discussions.apple.com/thread/3970684?tstart=0. There doesn't seem to be a firm solution. 17 sec? Wow! I only get 8 seconds. Apple isn't paying attention to us at all. You may have to preview and purchase songs elsewhere. Some people can't even download.

Ipod Mini starts to sync then stops after a few songs and doesn't sync

It has been about a year since I synced my iPod mini (Generation One) with my G3 PowerBook Pismo. I have been using it with no problems but I wanted to ad new songs. I went to sync it and it wanted to update. I am on the latest iTunes. After the iPod updated it would start to sync get to song 7 and just stop syncing. I have to pull the iPod off and there is nothing on it. I have restored the iPod Mini several time. I even tried going back to the orginal disk. Nothing helps. I tried to repair disk permissions in Disk Utilities and that gets about half way through then has an error. I have to quit this operation and can't repair the permissions. Could these be related. I am not a mac doof but I feel like one.
Thanks for any help!!!
[email protected]

Try taking it into an Apple store, it sounds like a HD problem, or something. If you've tried to restore it, and that hasn't worked, taking it in is probably your best bet.
-Michael

TC starts to restore then stops - Pls Help!

Similar Messages

Maybe you are looking for