TC will not communicate with Airport Utility error -6753. Wireless, internet (unsecure), and backup work fine., ,
TC is not communicating with Airport Utility (error -6753). I do have a flashing amber light. The wireless (printer, TiVo), internet (unsecure), and backups to Time Capsule work fine. I have done many hard and soft Resets, but that has not helped. Airport utility show the TC as amber and but won't let me findout the status of what is causing the problem.
What mode is the TC running in, router or bridged? You can sometimes have issues if the TC is bridged and the network is getting IP in a different subnet.
I would recommend disconnecting the TC from the network and plugging it directly into the Mac via ethernet. You may also need to do a reset if the dhcp is off, as in bridge.
Also note are you pressing the reset for long enough that the led on front starts blinking rapidly.. hold it in for 15sec to be sure.
Similar Messages
-
A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
Any idea how to fix it?In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.
-
Airport time capsule will not communicate with apple tv
I have just purchased the new AIRPORT TIME CAPSULE...it will not communicate with my APPLE TV..
Is the Time Capsule the only wireless router in your current network configuration? That is, is it connected directly to an Internet modem (and not another router) via Ethernet? Is the Apple TV in the same room, different room, or different floor from the Time Capsule?
-
My wireless hp printer will not communicate with my hp pc
my wireless hp printer will not communicate with my pc
Please read this post then provide some details. What printer model? What operating system? How is the printer connected - Wireless LAN or bluetooth?
Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???
Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day! -
My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?
The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation. -
My OS is windows 7 64 bit. My computer will not communicate with my HP Photosmart A646
My OS is windows 7 64bit. My computer will not communicate with my HP Photosmart A 646 portable printer.
It says it is ready but when I go to print a picture (4x6 or 5x7) that printer is not available. I downloaded an updated
driver but no change.
TY or any help
TfootRunning the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Printer deskjet f4200 will not communicate with computers
OK so I am at a loss I know the communication is the issue. I used this without problem from install till I had to have the computer crashed. Any help ? I have tried installing twice and the doc numerous times.
Hi @cmac22,
Welcome to the HP Forums!
I understand that your HP Deskjet f4200 printer will not communicate with your computers running Windows Vista. I am happy to look into this for you!
Please, take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
The apps on my iphone will not sync with iTunes. Process just skips steps 3 and 5. Any suggestions
Are you signed into iTunes on the computer with the same Apple ID the apps in question were "purchased" with? Is the computer authorized for that account?
-
My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?
I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number -
My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
My hp probook computer(win 7, 64 bit) will not communicate with my photosmart c 6180 printer
HELP! My hp probook computer(win 7, 64 bit) will not communicate (wireless) with my photosmart c 6180 printer. I did have this problem about 6 months ago, and here it is again! I have uninstalled my printer driver,then reinstalled, turned off, and turned on all three , computer, printer, and router (verizon). I tried the link that uses scan doc to determine the problem, but that too cannot find my printer. Also reinstalled the WEP in my printer. Does anyone have any suggestions?
Hey there @kickbk00 , Welcome to the HP Community
I saw your post about the wireless communication issues your Photosmart C6180 is having when connecting to your computer. I understand you have tried recycling the network devices, and uninstalled and reinstalled the printer to no avail.
I would next suggest this troubleshooting guide below. Click the link and select your OS, Wireless Network, and "Solution two: Manually resolve the issue" and follow the steps in order:
'Printer Not Found' Error Message Displays for the HP Photosmart C6100, C7100, and Officejet Pro L77...
I hope the printer communicates with the computer afterwards and connects successfully!
Please get back to me with the results!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?
It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved. -
I Photosmart eStation C510a, the zeen will not sync with the printer,or connect to internet.
Hi,
I require some asisstance with my Photosmart eStation C510a. The zeen will not sync with the printer, and I cannot seem to connect it with the internet. When I first installed this printer, it was fine, both the zeen and printer were connected and in sync.
An update was automatically installed by H.P. which appeared to create a problem with the zeen , being unable to sync with the printer, the zeen also lost the internet connection. The printer is working fine, and responds to the zeens commands for printing,
scanning and copying, but I would love to have the internet connection from the zeen, whereby I can use it for emailing etc.
Is there anyone out there that can help?
Thanks,
Christorobb.This document might help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02497857&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Does not open.
Instead Microsoft error message "encounters a problem and needs to close".
I have already tried the uninstall & reinstall "solution".
What else can I do. I have a paid for document I would like to read.
Thanks.Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep
Maybe you are looking for
-
How to delete the games in asha 305 which has writ...
games like casino, golf tour, maze and other inbuilt games are saves in phone how to delete it as they r write protected .... thank u
-
Access date to a date in labview
I am trying to read in a date field from an access database into my labview program i want to be able to display the exact date from my access database onto my front panel but every time i try and do this it doesnt give me what i am expecting for exa
-
Changes in View not showing 7.2
Hi I have a WD component with a view that has a label, inputfield and button. Initially on Init of view, I am setting "value1" in inputfield, I ran the application and it works. I go back to the code and change on Init to display "value2" in inputf
-
Hi Gurus, I am stucked in a problem related to Portal. I am developing a portal page under which many Links with URL's will be listed. I want all the URL's should be opened in a separate window. I am unable to do so. Appreciate any quick help on this
-
Hi All, I would like to know if there is any possiblity in SAP that I can take printouts of current FI/CO configuration and file it for any mishaps in future I can rebuild the FI system based on the prints I have. Or if there is any procedure to take