TCA Data Model between 11.x and 12.x
Hi,
Just wanted to check whether there is significant change in Customer Data Model (TCA) between 11.5.10.2 and R12.
I am looking whether there is any change in Table Structure/ APIs etc between these two versions.
Any help is appreciated.
Thanks,
Dinesh
Hello,
11i TCA already equipped to handle the following entities
1. Customer
2. Employee
3. Student
However, R12 brings a change to the above by adding several new trading entities to it, viz.
*1. Suppiler*
* Supplier, supplier site, & supplier contact information migrated to TCA tables
* Three new AP tables are introduced to store the supplier information, viz.
AP_SUPPLIERS AP_SUPPLIER_SITES_ALL AP_SUPPLIER_CONTACTS
* The old PO_VENDORS table is obsolete now, but exists as a view to provide the backward compatibility
*2. Bank & Branches*
* Bank is now centralized model as part of R12 architecture and Cash Management owns it
* The three key Cash Management tables to store Bank information are:
1. CE_BANK_ACCOUNTS - Stores bank accounts
2. CE_BANK_ACCT_USES_ALL - Stores account uses by Operating Units & Legal Entities
3. CE_GL_ACCOUNTS_CCID - Stores bank account use accounting data
* The TCA party model is being used to model banks and bank branches as parties with the associated attributes of Relationships, Address, Contact and Locations
*3. LE & Intercompany*
Regards,
ND
Similar Messages
-
Data Replication between Oracle 9i and 10g
Hello,
I have a question regarding possible Replication Models between Oracle 9i and 10g. Does anybody know a possible way to syncronize the schema data between a 9i and 10g database in realtime?
If yes can you please post perhaps a link with a kind of how to?
Many thanks to all,
Bob...You can read this metalink note 370850.1 - there are bit more ways of replication discussed.
Yes, platforms can be different, but recomendation is to use the same platform for both databases. -
Data reconciliation between R/3 and the BW Systems
How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony GTony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat -
How can we do the data migration between Oracle Applications and SAP R/3.
Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmarajuthe 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.
-
Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support -
Needed SAP CRM Data model with Object, Entity and Attribute level details
Hello all,
We are working on a huge IS-U / CRM implementation and we are still in the data gathering phase. The client has a whole load of legacy systems that will be replaced with IS-U and CRM. Right now we are in the process of developing data models using Excel first and then presenting them to the client to go forward from there. For this we need to have all the business objects, entities and their attributes.
I know about the SD11 transaction, but we don't have a CRM system yet. My colleagues have access to a German ERP system and they were able to get models for HR, FI and Asset management. I tried for the Business partner / customer in there, but the models were not proper.
So, once again, I need the specific data models out of SD 11 for CRM business partner. If anybody has the information, please do pass it on to me as I need them urgently. It would be a great help if somebody can do so.
Regards
RajeshI suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant -
How to do data migration between single node and multi node HANA systems ?
Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ? -
I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
DavidYou don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD
-
Issue while creating Data Model in BI Publisher and logging into xmlpserver
Hi All,
We are facing an issue in OBIEE 11.1.1.5.
If we are logging with Non Admin Id (other than weblogic) and select New Data Model, a blank screen is coming. Where as, if we use Admin Id, we are getting screen as usual for creating data model. There were some blogs mentioning to change Priviledges for SOAP access, but that approach is also not working.
Further, we are also not able to open xmlpserver with Non Admin Id.
Any help or pointers would be great.
Regards,how about pasting the content of your data template here, so that forum members can see what could be the problem.
-
Data sync between exchange 2003 and exchange 2013
Need assistance on a general direction.
There is a 2003 domain with exchange 2003 currently in use. On this domain there is also a contact management application that is heavily integrated and cannot be update at this time. I would like to bring up a new 2013 exchange server.
Is there a method that I could have user data synchronized between the 2013 exchange data and the 2003 exchange? In this manner users could use the 2013 exchange as primary and the Contact manage application could use the sync copy of exchange 2003. For
now I am only concerned about he the calendar however I am sure the other information will need to be sync as well.
Please let me know. Thank you.Hi There,
Once you install Exchange 2013 it will use the same data your Exchange 2003 is using \ seeing because both of them use Active directory for Directory information.
Exchange 2013 will see all the users that are 2003 without you needing to sync \ move data.
If you need to users to be on Exchange 2013 and keep Exchange 2003 all you need to do is move the mailboxes to Exchange 2013.
Cheers,
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization -
Inconsistent date formats between Rich Client and HTML client
Hey All,
Just wondering if anyone has come across an issue with inconsistent date formats from a universe based on an MS SSAS 2012 database connection in 4.x?
The value of the date is returned as a string from the query but the object data type has been changed to a Date object meaning BusinessObjects should convert the string into a date if the format is correct.
The problem in this is that the date being returned in Rich Client is in dd/MM/yyyy format whereas on the Web Client is in MM/dd/yyyy.
From the Web Client business objects will return a date, however, it is a mix of MDY and DMY format.
i.e. 15th of March will be displayed as 15/03/2014
whereas 12th of March will be displayed as 03/12/2014
All our application servers are configured for English (Australian) regional settings meaning all dates should be in DMY format.
The date in the database is stored as a non-ambiguous yyyy-mm-dd format so it appears the variation is occurring somewhere between the database and BusinessObjects for the Web Client based reports only.
I have also checked the sqlsrv.prm file based format and changed this to DMY but this has also not made a difference.
The same universe in 3.1 and MS SSAS 2008 works correctly but not this one.Hi
The date in the database is stored as yyyy-mm-dd format.
As per user request.... Set the date format @ the Business layer level. so it will refelct same as in the WebI.
Please find the below link. how to use custom Display option.
BI4.1 Business Layer Enhancements - Create Display Format -
Mapping data model to java classes and Interface.
Need help in mappning my data model into java classes;
Here are some of the details:
Table, Poll:
PollID int
PollName varchar
BusinessUnit varchar
DisplaySchemeID int // reference to DisplayScheme table.
Table, DisplayScheme
DisplaySchemeID
DisplaySchemeName
etc
Table, URL
UrlID
UrlName
UrlDesc
Table, PollURL
PollURLID
PollID
UrlID
PublishDate
etc
Table, Tag
TagID
TagName
PollID
So, a POLL is associate with a DisplayScheme.
A Poll can have many URLs and a URL can be associate with many Polls , mapped in the PollURL table.
and same is the situation with tags.
Essentially I want to learn how to do one to many mappning and many to many mapping.
Also to add, since I plan to use Ibatis for OR mapping.
So I should a Parameter call to map for creaint a Poll. And to create a poll the form submitted will have:
- PollName
- URLs ( multiple )
- one display scheme.
- Tags ( many )
So if you can show how to write a DAO createPoll method, then it would be great.
Not sure if am asking a lot, but this would be a great example to move forward.The below is the sample DAO Class.
For your case, you have to create your own PollBean with getters and setters and just pass the object to the method
public int create(Connection con, ProjectBean projectBean) throws SQLException {
int result = 0;
String insertQuery = " INSERT INTO" +
" M_PROJECT(" +
" PROJECT_ID," +
" PROJECT_NAME," +
" PROJECT_DESCRIPTION) " +
" VALUES(?,?,?,?)";
initPrepareStmt(con, insertQuery);
setString(projectBean.getProjectID());
setString(projectBean.getProjectName());
if(projectBean.getProjectDescription().equals("")){
setString(" ");
}else{
setString(projectBean.getProjectDescription());
result = executeUpdate();
return result;
} -
VPD date issue between 10.1 and 10.2 databases
I have uncovered an issue today with VPD against date fields. The issue came up at a client site on a 10.2 database. When I got back to the hotel and tried this on my own database, which is 10.1, I got no issue and everything worked ok.
Therefore, I am asking if anyone is able to try out the following for me on different Oracle databases and platforms and let me know whether it worked for you or not. I'd like to compile a list of database versions and platforms on which the issue occurs.
Step 1: create this table as a user
CREATE TABLE TST_DATE AS (
SELECT 1 PERSON_UID,
Trunc(SYSDATE) BIRTH_DATE,
To_Char(Trunc(SYSDATE), 'DD-MON-YYYY') CHAR_DATE,
123456 TAX_ID,
'Smith, Michael B.' FULL_NAME FROM dual);
Step 2: grant select rights on the table
GRANT SELECT ON TST_DATE TO PUBLIC;
Step 3: switch your login to SYS and run this script:
CREATE OR REPLACE FUNCTION F_CHECK_ITEM_TST(p_object_schema in varchar2, p_object_name varchar2)
RETURN VARCHAR2 IS
V_PREDICATE VARCHAR2(2000) := '1 = 2';
BEGIN
RETURN(V_PREDICATE);
END F_CHECK_ITEM_TST;
Step 4: As SYS, run this to grant access rights over the function
GRANT EXECUTE ON F_CHECK_ITEM_TST TO PUBLIC;
Step 5: As SYS, run this to enable the policy
BEGIN DBMS_RLS.ADD_POLICY(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST',
FUNCTION_SCHEMA => 'SYS',
POLICY_FUNCTION => 'F_CHECK_ITEM_TST',
STATEMENT_TYPES => 'SELECT',
POLICY_TYPE => DBMS_RLS.DYNAMIC,
SEC_RELEVANT_COLS => 'BIRTH_DATE',
SEC_RELEVANT_COLS_OPT => DBMS_RLS.ALL_ROWS);
END;
Note: in the above policy change the OBJECT_SCHEMA name to be the name of the user who owns the table you created in Step 1
Step 6: Go into Discoverer Admin and import the table as a new folder.
Be sure to uncheck the "Date hierarchies" box and set "Default aggregate on data points" to detail. Grant access to any user.
Step 7: Using Desktop or Plus, log in as that user then try to query the folder with the date not included, there should be no problem.
Step 8: Now try to query with the date included
On my 10.2 database I get ORA-24334: no descriptor for this position. This happens when logged into Discoverer as the table owner, EUL owner or any other user. However, when logged into Discoverer as SYS which is exempt from all VPD policies, there is no error when the date is included.
We tried this in Discoverer Desktop, Plus and Viewer with the same results in all three. We can successfully query the table from SQL*Plus, SQL Developer and TOAD.
There also seems to be no issue at all with the 10.1 database so there seems to be an issue between Discoverer and the 10.2 database.
What do you think?
P.S. to cancel the policy use this script when logged in as SYS:
EXEC DBMS_RLS.drop_policy(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST');
This same information is available on my blog in a more readable format here:
http://learndiscoverer.blogspot.com/2006/12/vpd-date-issue-between-101-and-102.htmlHi Rod
Well don't you just love Oracle. Obviously, whatever tests were done for certifying Discoverer against the 10.2 database did not include checking VPD policies. This merits a blog entry from me.
Your workaround for V_PREDICATE VARCHAR2(2000) := 'BIRTH_DATE=TO_DATE(''01-JAN-0001'')'; works. However, I had to write a new function to do this because my real function was trapping about a dozen items at the same time, some dates, some numbers and some varchars - exactly the way that the Oracle example code shows it in the 10.2 database manual.
So what I did was to create a new function that only handles dates and added a dedicated policy that works with only that function. Unfortuately, because I have many dates to manage, I was unabe to hard code the BIRTH_DATE so here is what I did:
V_PREDICATE VARCHAR2(2000) := 'SYSDATE = TO_DATE(''01-JAN-0001'')';
This works perfectly and Discoverer stopped complaining. It just has two policies on the same table for different data items. Isn't VPD cool? I'm hooked.
I really appreciate your time and effort on this. Now, let's see what Oracle support make of the issue because I raised a service request last night. No reply yet I'm afraid.
Best wishes
Michael -
Date difference between Requsition apporval and Po approval in Oracle apps
My requirement is that l need to get the number of date difference between requisition apporval date(requisition) and po approval date (purchase) excluding holidays how to do it ?
Thanks in advance..One PO could be generated from multiple requisitions. In that case, which requisition would you like to consider?
One requisition could be converted into multiple POs. In that case, which PO would you like to consider?
Assuming, there is a one-to-one relationship between your POs and requisitions:
Link a PO to the corresponding requisition by joining po_distributions_all.req_distribution_id with po_req_distributions_all.requisition_id
Once you have found the 2 records, get the approved_date from po_headers_all and po_requisition_headers_all
Then go to bom_calendar_dates for those dates and find the difference between seq_num. That is what you are looking for.
Sandeep Gandhi -
Data exchange between Oracle DB and JD Edwards
Hi all,
We have an Oracle 10g EE database which we maintain. The financial system is using JD Edwards. We need to provide them some daily information(payments) Also they need to send us some data( payment reconciliation). My questions are:
1. What kind of interaction is posible between Oracle db and JD Edwards?
2. What database does JD Edwards internally use? Is in an Oracle db?
3. Is there an ODBC driver available for interaction?
4. Does JD Edwards handle credit card payments?
Please, can you give me an answer quick, we need it by the end of today for a proposal..
Excuse my lack of knoledge, but we never worked with JD Edwards before...
Thank you#2 All the JD Edwards installations I have ever come across were on AS400 (iSeries I believe is the new name) â¦their niche on the application software market was the fact that they were running so well integrated with that particular platform. AS400 comes bundled with [one of the many flavors of] DB2 ⦠that is, no extra license required. Oracle has never had an AS400 port ⦠so I doubt youâll find Oracle underneath your JD Edwards installation.
#1 âsome daily payment informationâ suggests batch type integration and relatively small in scope ⦠all systems/applications have some sort of data loader and there are always ways to get data out into files ⦠so a custom, file-based little integration mechanism could be all that you need. I did work once in such a little project ⦠the JD Edwards specialists in the company did their part of loading and loading on their side ⦠we did the same on the Oracle side ⦠we agreed on file formats, content, schedules, a common/secure drop zone in the network etc. and that was pretty much it. The point is, there must be some JD Edwards people in your company you should get involved in the discussion/proposal.
#3 An ODBC driver for DB2 on AS400 very likely exists ⦠keep in mind though that this means the integration will be at a low level (table level) ⦠many applications expose integration points at the API level (application level). Again, you have to get the JD Edwards people on board.
My last points ⦠if you have Oracle in house then call your Oracle representative ⦠Oracle owns JD Edwards ⦠you may get better answers or re-directs there. Also look if your company has any middleware software already ⦠contact the vendor and see what they have to say
Maybe you are looking for
-
Hi, i installed adobe reader xi, but i can't open it , i have a message error with this "MSVCP100.dll" and "Acrobat failed to load its Core DLL", i'm in windows 7, tell me what to do to fix this problem, thanks. Bonjour, j'ai installé adobe reader xi
-
Can I get a response back when I use HTTP adapter
Hi , I am doing a integration between SAP and ThirdParty Product using PI 7.1. The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI. So,its a HTTP sender and IDoc receiver. So I w
-
Hyperlinking Overriding Marquee Zoom?
Hello all - I'm a new member to this forum and have what is (I hope) a simple question... I've got a series of PDF documents that have hyperlinks embedded in them from another application (ArcGIS). The hyperlinks work great with Adobe Reader 8 (the
-
Numbers crashes when scrolling
Since updating to IOS 8, including all subsequent updates released for IOS 8, Numbers has exhibited crashing when scrolling horizontally or vertically when the spreadsheet exceeds the screen boundaries. I have erased Numbers from the iPad Air (sympt
-
I made some changes to my iWeb site, and when I try to publish it, I get the error message: Can't create the file "Mod_footer_bg.jpg." The disk may be damaged or full, or you may not have sufficient access privileges. What do I do now?