Tcode CM25:BDC or function module to dispatch planned orders

Hi all,
Could you please suggest a BAPI/FM for CM25 -dispatching the planned orders.
While i try BDC, it requires the line selection for dispatch,which does not get captured in recording.
Can anyone throw light on this or suggest any alternative.
thanks
kiran
Moderator message - Cross post locked
Edited by: Rob Burbank on Oct 23, 2009 11:28 AM

reposting it

Similar Messages

BDC for CM25 tcode or a function module to dispatch planned orders

Please suggest a way for BDC of CM25 tcode as the selection of planned/process order in the tcode is not captured in recording.
or provide FM/BAPI for dispatch of planned orders.
Moderator message - Cross post locked
Edited by: Rob Burbank on Oct 23, 2009 11:27 AM

reposting it

Standard bdc or function module

Can any one suggest the BDC or Function module to upload 21 (Family and dependent infotype).
regards,
Lakshmi

Hi
better to use BDC
Regards
Sri

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

Table or Function module to get Internal order planning and Cost element pl

Dear All,
Table or Function module to get Internal order planning and Cost element planning.
Internal order planning from T-code KO13.
Thanks in advance.
Regards,
Ravi
Edited by: Ravi Chandra on Sep 13, 2011 8:08 AM

BPEJ, BPEG, BPEP

Function module to get Sales Order classification.

Hello everyone,
Can someone give me a function module to get Sales Order classification? Really appreciate it.

Hi
Check the following BAPI's:
BAPI_OBJCL_GETDETAIL
BAPI_OBJCL_CHANGE
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
Reward points if useful
Regards
Anji

Dispatch planned orders CM25

Dear experts,
Is it possible to dispatch planned orders in the capacity planning board CM25?
In which profile do I change the settings to make this happen?
Many thanks,
Tim
PS: will award points!

the following profiles can be used for viewing capacity over load
SAPSFCG001     SFC: View work center/capacity (2 graf.)
SAPSFCG002     SFC: View work cntr./capacity (tabular)
SAPSFCG003     SFC: View order/capacity      (tabular)
SAPSFCG004     SFC: View order/capacity     (graphical)
SAPSFCG005     SFC: View Individual cap.    (graphical)
SAPSFCG006     SFC: View work cntr/ind.cap. (tabular)
SAPSFCG007     SFC: View order/individual cap. (graph.)
SAPSFCG008     SFC: View order/individual cap. (tabul.)
SAPSFCG009     SFC: View line               (graphical)
SAPSFCG010     SFC: View setup optimize     (graphical)
SAPSFCG011     SFC: View work center/capacity (3 graf.)
SAPSFCG014     SFC: GANTT view wkcntr/capacity (3 grph)
SAPSFCG015     SFC: Evaluation, standard overview
SAPSFCG016     SFC: WC/Capa (2 temp.save graphical)
SAPSFCG020     SFC: Standard overview in work cntr view
SAPSFCG021     SFC: Standard overview in order view
SAPSFCG022     SFC: Standard overview in indiv.cap.view
SAPSFCG023     SFC: Standard overview + actual cap.rqts
Usually the following std profiles are used.
SAPSFCG021     SFC: Standard overview in order view
SAPSFCG022     SFC: Standard overview in indiv.cap.view
<b>Dispatch of capacity is carried out in the following transaction</b>
CM21, CM22
CM27, CM28
CM31, CM32

BAPI or FM to DISPATCH PLANNED ORDERS

HI Gurus,
We have a requirement to automatically dispatch planned orders instead of manually going to CM25/CM21 screen to manually do it.
Is anybody aware of any BAPIs, FMs or anything to be able to dispatch planned orders.
I was going to use BDC but the table control has restricted me to do this.
Thanks for you help.

Hello Basil,
I am looking for the same solution, can u plz update if u hav some information how to approch for the requirement.
Thanks in Advance.
Adar

Can't dispatch planned order (LA), but can dispatch production order

Hello,
   I'm new to capacity planning and all of the related configuration screens. I'm probably missing something simple. We've configured our work centers and routings. We've configured our production order types (tcode OPU3, type US01) and planned order types (tcode OPU5, type LA) so that all create capacity requirements and are relevant to 'detailed scheduling'. Requirements are being generated for production orders and planned orders. We can see correct setup and production times in the graphical planning table CM21.
   Here's the problem: When we try to dispatch a planned order, nothing happens. There is no error, but the order is not dispatched. If we convert the planned order into a production order, accepting all SAP proposed defaults, and then try to dispatch the production order, it works fine.
   What configuration are we missing? My first thought was to look in OPU5 for order type LA. In the detailed scheduling section, scheduling horizon is zero (is this Ok?), SelID: Detailed is 01, 'scheduled' and 'generate capacity reqs' are checked.
Thanks,
Randy

Randy ,
Please analyse the below note related to your issue.Hope this will help you to sort out the problem.I have cheked the configuration area.I hope u are correct .In fact , it may related to your production version if you do automatic dipatch.Please reade the note and come back.
If an error arises when automatically dispatching planned orders (for example, a capacity overload at a work center) then the system schedules the affected planned orders to another production line.This function is available in both types of planning table. It is of interest for all areas that use planned orders, for example in repetitive manufacturing or in MRP/MPS. It can also be used in production control when later converting planned orders to production orders.
this function the following conditions must be met:
The dispatching function Change production version on error must be set in the strategy profile.
The original work center
must be entered in the production version of the material as the production line (not necessarily in the current production version).
can only be assigned to one operation in the routing for this production version
The alternative work center can only be assigned to one operation in the routing for the alternative production version
If an error arises the system copies the production version with the version key that is next alphanumerically into the planned order. The planned order is rescheduled with this production version. However, it is not dispatched to the new production line but remains in the pool. In this way you can dispatch the rescheduled planned orders together with other planned orders in the pool to the new production line.
To give you a better overview and to improve handling you should choose a sort key with which the planned orders in the pool are sorted according to work center and, for example, latest start date. All orders that are to be dispatched to a production line are then placed next to one another in the pool. If an error arises during automatic dispatching to the new line every planned order affected is rescheduled with the next production version
. If the conditions are not met then the following occurs depending on your settings in the strategy profile:
Dispatching is terminated
Dispatching to the same work center is continued and error messages are written to the planning log
You can only dispatch main operations with this function, but not sub-operations. Operations are always dispatched with the full quantity to the new work center
Reward point if useful
Regards
Jia

CM40 dispatch planned order among different work centers

Hi
   we have a finish material ,which can be manufactured using 3 different work centers.Then I create 3 production versions to link each work center .
PV1   Routing 1(work center1)   BOM 1    production line:work center1
PV2   Routing 1(work center2)   BOM 1    production line:work center2
PV3   Routing 1(work center3)   BOM 1    production line:work center3
   Is it possible to create a batch job to dispatch planned order between work centers in CM40?I am able to manually dispatch planned orders between different work centers in CM22..
   CM40 use the same selection/strategy profile as CM22 and the planned orders are dispatched to other period if current period get overload..But I expect CM40 to dispatch the planned orders to other available work centers..Anyone has any suggestions?
   thanks very much..
Edited by: Monst Yang on Jan 10, 2012 9:59 PM

Hello,
With CM40 also you can dispatch planned orders as like CM22
Please look into the below link for more functions performed with the transaction:
http://help.sap.com/saphelp_46c/helpdata/en/f3/0869a3a6ae11d183d00000e83235ee/content.htm
Hope the information was useful
Regards,

Any function module to change planning hierarchy (tcode: MC92)?

I need to change planning hierarchy for product alloction.
I have tried to do it via transaction recorder, but some screens are missing when I tried to record it.
Could any one please advise if there is any function module that can serve the same purpose? Thanks.

Thanks Bhanu for ur quick reply.
Is that enough to change the technical name in the table RSZCOMPDIR.
Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
Eg.
Change all the technical name of queries ZQSAP to ZQXYZ.
If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables.

WANTED: Function Module (Product Allocation Planning Hierarchy Upload Tool)

Hi,
I would like to seek assistance in utilizing the <b>right function module</b> in uploading Product Allocation Planning Hierarchy to MC62.
I've tried direct table update and BDC but to no avial.
Points will be rewarded.
Thanks in advance

Hi,
I'm having trouble using the FM 'MCP_GET_HIERARCHY'.
CALL FUNCTION 'MCP_GET_HIERARCHY'
    EXPORTING
      i_gstru             =
IMPORTING
RETURN              =
    TABLES
      t_filter            =
      t_char_values       = .
What do I put in i_gstru, t_filter, and t_char_values?
I'm very new with this.
Thanks in advance for the help.

Function module for changing Work order user status in IW32

Hi,
I want to change the work order user status in IW32 using ABAP.
Is there any function module to do so or any other way? I have tried using BDC but this does not work.
Please suggest.
Regards,
Naba
Edited by: n. saha on Nov 5, 2008 6:46 AM

I am getting Same Problem.
fi_methods-method = 'SAVE'.
APPEND fi_methods.
fi_methods-refnumber = 1.
fi_methods-objecttype = 'USERSTATUS'.
fi_methods-method = 'CHANGE'.
fi_methods-objectkey = '002000002453'.
APPEND fi_methods.
fi_userstatus-user_st_text = 'COMM'.
fi_userstatus-user_langu   = 'EN'.
fi_userstatus-CHANGE_EVENT = ' 01 '.
APPEND fi_userstatus.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
    it_methods    = fi_methods
    it_userstatus = fi_userstatus
    return        = fi_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Above code I am using and there the message comes like
T ID                   NUM           MESSAGE
S IW                   080           Order saved with number 2000002453
S IWO_BAPI2     110           BAPI control was ended
can any on know what is wrong in this? please help if having knowledge.
Thank You,
Jahnavee Trivedi

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

BAPI or Function Module to get open orders and open quotation details

Hi,
I have requirement to get all the open orders(as in VA05) and all the open quotations( as in VA25) for a sold-to-party. Could you please let me know if there are any BAPIs or Function Modules for the same.
Thanks,
Surekha.

Hi,
Check if the below helps:
1. BAPI_SALESORDER_GETLIST for VA05
2. BAPI_QUOTATION_GETDETAILBOS for VA25.
Regards,
Vivek

Tcode CM25:BDC or function module to dispatch planned orders

Similar Messages

Maybe you are looking for