Tcode CS02 changed triggers idoc but not CS21 using BD21

Hi
when bom is changed using CS02 then when using BD21 triggers IDOC for the message type
but
when bom is changed using CS21 then it does not trigger idoc using BD21
I checked the code for BD21 message type function
I found that change pointer (bdcp2-object id ) is different for both transaction CS02 and CS21.
CS02 is updating object id with mast-stlal but this entry is missing for CS21
I am not able to find how the table (BDCP , BDCP2) for change pointers is updated for bom change.
Can you please let me know the patof code which i should check for updating the change pointers entries in BDCP , BDCP2 for bom

I checked the sap system is creating enteries in cdhdr change pointer usin fm STUE_V_WRITE_DOCUMENT . I checked that when used TCODE CS05 the entry is updated for stlal as
In CS02 the entry for OBJID hold the value for stlal (Alternative BOM)
ie 500M0001064220110914 01 20110914
In CS21 the entry for OBJID does not hold the value for stlal (Alternative BOM)
ie 500M0001064220110913 20110913 (entry missing for stlal)
It clears the value of stlal . Is ther any sap note or configration setting for CS21 to get the value for alternative bom .

Similar Messages

HT1911 I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed.

I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed. So I can't download itunes software updates or update my iphone even though I have just verified my info. I know others that have this problem but can't get support to resolve it.

Hi mpellichero,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you are being asked for the password to your previous Apple ID:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Best Regards,
Jeremy

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

I am trying to change my password, but not remember the security questions and not access recovery email. Please give me a solution.Ana Maria Cappatto Simoes/ F. 11.50414433

I am trying to change my password, but not remember the security questions and not access recovery email. Please give me a solution.Ana Maria Cappatto Simoes/ F. 11.50414433

Welcome to the Apple Community.
    1.    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    2.    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    3.    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

I've changed PC's but not able Acrobat 9 will not accept my serial key

I've changed PC's but not able Acrobat 9 will not accept my serial key. I've been advised this version is no longer supported and I will need to purchase an upgrade, why if this worked perfectly fine on my old pc won't it work/accept serial key on my new one?

Hi christinec87584091,
Please try the steps mentioned in the KB Doc : Error "Invalid serial number" | Acrobat 9 | CS4
This might resolve your issue.
Regards,
Aadesh

HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I Renamed some songs on my ITunes, they are changed on Itunes but not on my IPhone 3GS

Please Help me ... i added an album to my IPhone and renamed the Songs/Album and they changed on ITunes but not on my phone what is wrong ? im on the latest Version of ITunes and the new OS 5

Thanks for the response. That was helpful. However, I still want to know why did the songs I purchased yesterday appear on my IPod for downloading but the those I purchased today did not? After you rassistance I went to settings and turned on automatic downloading for my ipod. So if it wasn't enabled yesterday, how was I able to see the purchases I made yesterday on my computer on the ipod and then download them to the ipod? That is what I expected to see today but all I was seeing were the songs I purchased yesterday and not the ones I did today.

I want to get rid of all unwanted apps off my iphone5. I mean the ones appear as bought but not in use. Is this possible?

I want to get rid of all unwanted apps off my iphone5. I mean the ones appear as bought but not in use. Is this possible?

No, you can not delete the pre-installed apps. However, you can hide them by placing them in a folder (create one by dragging one app onto another) and putting that folder on an unused page.

Change User Name But Not Email SBS 2003

Greetings,
I need some help. I have a user that got married and wants to change her last name because she sends email from Outlook and it shows her old last name. I would like to change her user name but keep her email address the same.
On SBS 2003 from Server Management -> Users, if you rightClick a user and select "Rename" from the popup menu, you can change the first and last name and leave the email as is. The user name will change and the email address stays the same in
the user list when the edit window closes.
I would like to do this if there are no repercussions such as email folders disappearing or unaccesable or any other changes to anything other than the user name.
What will happen if i change the user name as I descirbed above. Will it mess up any of the users access. permissions, etc?
Thanks very much for your help!
Lewis

Hi Lewis:
If I understand what you mean, you would like this user to receive mails addressed to "old-name" and send mails with the reply address as "new-name".
To do this, open Active Directory Users and Computers, find the user, right click - properties, email addresses.
Add the new email address and set it as default. Uncheck the box to update based on recipient policy.
You can also change the users name in the SBS console, but if you just change the email address there emails addressed to old-name will not be received. So in the console, just change the users name for logon and user name to new-name, but not the
email address. Just add one in ADUC.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Can I stop the output of PO message on change of order but not on creating

Can I set customising so that the PO automatically creates a message on creation of the order, but not when it is changed. That way the purchaser can choose to recreate the message if necessary. Sometimes changes are made to the order for internal purposes, but the order does not need to be resent to the Vendor. Currently this happens automatically via an email.
Alternatively, is it possible to print the whole PO when changes are made rather than just the bits that have been changed? To avoid confusing the Vendor with half the order being resent.
Thank you
Karen

This is not possible on standard SAP. There is a workaround you can consider so user can reprint the entire PO. When users have made the changes and ready to print the PO, they can go to PO message screen and do the followings:
1. Delete the entry corresponds to change message (this is the row with yellow light and has check mark in the C column)
2. Select the row corresponds to the first printing of PO (this is the row with now check mark in the C column) and press on repeat output.
Once they've done these steps, the entire PO will be included in the output.
If you need to make this happened automatically, you will need to do custom development.
Hope this helps.

Spry accordion works in template, but not pages using that template

So I added a spry accordion to one of my templates and changed the script to default closed. It works great. In the template. But not in any of the pages using that template. Basically I can see the content in the accordion on the page as if there is no accordion at all. And I can see the script and html telling me an accordion should be there. It just isn't. I can see the framework when in edit mode. But in live mode, it's like there's not there but the content.
I'm using Dreamweaver CS6.
Any thoughts?
Thank you for your time!

If the template has been created properly, then the Spry files should automatically be included in the child page(s).
My template looks like
<!doctype html>
<html>
<head>
<meta charset="utf-8">

<title>Untitled Document</title>

<script src="../SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css">


</head>
<body>

<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">Content 1</div>
</div>
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 2</div>
    <div class="AccordionPanelContent">Content 2</div>
</div>
</div>

<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>
My child page looks like
<!doctype html>
<html>
<head>
<meta charset="utf-8">

<title>Untitled Document</title>

<script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css">


</head>
<body>

<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">Content 1</div>
</div>
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 2</div>
    <div class="AccordionPanelContent">Content 2</div>
</div>
</div>

<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>

Fax can receive but not send using ATA 187

Hi, i'm fairly new to the world of voice so please bare with me on this one
I'm upgrading a customer from analog telephony to VOIP and the customer wants his faxes working.
Telephone works fine, CUPC works fine, CUBAC works as it should etc but the fax-machines can only receive faxes, not send them.
The setup is:
CUCM 8.5.1.12900-7
CUBE Version 15.1(3)T1
ATA 187.9-2-1-0
I'm using T.38 and SIP
When i put 2 fax machines on the new solution and test them they work. They can send and receive faxes but then the traffic is local and not sendt out over the IP-trunk. When i send a fax to a fax machine (from external) it works but when the same fax machine tries to send a fax externally it failes.
It places the call but when it tries to send the fax it gives up.
I've atteached the "debug voice ccapi inout" and "debug ccsip all" from CUBE for details.
This is the last issue i have to get this customer flying on Cisco equiptment (i hope).
/Tony

Hi
Sorry for misleading you on that one. I know its on the trunk
And i believe i found the cause of my problem. The DN wasnt presented the way the the provider wanted it.
The misleading part was that it failed on media negotioation, not on the call. The log even tell the story of media negotiation being succesful but it also terminates on "cause=64" which is media failure.
I was able to place calls, receive call and receive faxes but not able to send any fax at all. That through me off thinking there was nothing wrong.
Thanks for the help

HT3867 my wifi icon show on off buttan show but not in use

my wifi icon show on off buttan show but not in use

Setting the router preamble to long does not work for me. I have tried everything.
I am connected to WiFi, according to the icon in the corner, but it just stops working at random times for all applications. The only way I can get the WiFi working again (temp fix) is to flick airplane mode on and off. Then it will work for a while, and then mysteriously stop working again, even though it says I am connected etc.
I have n 1st gen ipod touch, and two 3G phones here that can connect and stay connected with absolutely no problems, so it is definitely something with the 3GS.
I think I am going to have to try returning this iphone to Apple and getting a replacement, as I have tried everything to get it to work properly.
Not to mention the compass is VERY badly off with this iphone. But that is not as big a deal as WiFi refusing to work.
It is too bad because I get great battery life with this iphone... better than my 3G... and I am worried about returning this one and getting a replacement with poor battery life that I read so many other people seem to have.

Firefox throws "This Connection is Untrusted" when using hostname, but not when using IP address

I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the ''src" url is http only (there is no SSL certificate) when I use IP address (https://10.10.101.156:8006/apprecovery/admin/Core/Storage) in address bar instead of hostname (https://hostname:8006/apprecovery/admin):
===
This Connection is Untrusted
You have asked Firefox to connect
securely to d37t50w1, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
d37t50w1 uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
===
Why is it giving this when using hostname but not when IP address is using?

Corrected first para above:
I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the "src" url is http only (there is no SSL certificate) when I use hostname address (https://<hostname>:8006/apprecovery/admin) in address bar. But I dont see the message in iFrame when I instead use IP Address (https://<IP Address>:8006/apprecovery/admin) to go to main website.

Matarial master changes for a particular material type using BD21

Hi All,
<b>I am facing one problem related to change pointer in ALE.</b>
I have configured the ALE layer between two systems successfully.
<b>I have used filter group</b> on material type and also I have done the <b>reduction of IDOC.</b>
When I trigger the material master data changes using BD21, it triggers the data for all the material type where as I want to trigger the material master data chages to particular material type only.
Can anybody suggest some solution for this.
Note: Please don't say to use <b>filter group on material type</b>......I have already done that.
The correct solution will be rewarded with 10 points!
Thanks & Regards
Prabhat

The firs thing I would do is verify the config. Make sure the message type of the created IDocs matches the message type to which the filter is applied in the distribution model. If everything looks ok, place break-points at the following locations:
In FM MASTER_IDOC_DISTRIBUTE, on the call PERFORM DIST_MODEL_READ_FOR_MESTYP. This subroutine reads the filters from the distribution model. Verify the values in internal table RECEIVERS_AND_FILTERS are correct.
In FM MASTER_IDOC_DISTRIBUTE, in FORM IDOC_SELECTION_AND_SERVICES, on the call to FM IDOC_DATA_APPLY_FILTER_VALUES. This function should return the filtered results. IDOC_DATA contains the data segments of your IDoc and CONDITION_BLOCKS contains the filter.
When you run BD21, you should hit these break-points.

Tcode CS02 changed triggers idoc but not CS21 using BD21

Similar Messages

Maybe you are looking for