Tcode does not appear
I am doing mass change to the contracts thru portals but the TCODE does not appears in SRM table. I there anyway to make the T-CODE appear in SRM. Tcode in SRM is bbp_ctr_mass.
Thanks,
AP
Hi,
Could you explain in more details what you are trying to achieve with this TC? You should be able to execute this TC directly on the SAPGui too..
Regards.
Message was edited by:
Yeu Sheng Teo
Similar Messages
-
SPOOL DIALOG DOES NOT APPEAR WHEN NO_DIALOG = SPACE
The control parameters that allow the spool dialog popup to appear work when executing directly from MB90, but when executing from MIGO, the spool dialog popup does not appear. The print output is occurring without giving user option to change spool dialog entries. The desired outcome is to have the spool dialog popup appear when executing IM transactions and our output type is WEE4 to allow user input prior to printing.
See below for code:
FORM CALL_GR_SMARTFORM.
TABLES: LTBP,
QAMB.
DATA: LV_LTBP TYPE LTBP,
LV_SFORM_NAME TYPE SFORM,
LV_FM_NAME TYPE RS38L_FNAM,
LV_MESS TYPE STRING,
LT_OUTPUT_OPTIONS TYPE SSFCOMPOP OCCURS 0 WITH HEADER LINE,
LT_COPIES LIKE MSEG-MENGE,
LT_CONTROL_PARAMETERS TYPE SSFCTRLOP OCCURS 0 WITH HEADER LINE,
LV_MATERIAL_TEXT TYPE MAKT,
L_CX_ROOT TYPE REF TO CX_ROOT.
SELECT SINGLE * FROM MAKT INTO LV_MATERIAL_TEXT
WHERE MATNR = MSEG-MATNR AND
SPRAS = 'EN'.
IF mseg-werks = '0050' AND NAST-KSCHL = 'WEE2'.
LV_SFORM_NAME = 'ZZEBRA_GRSERVLBL'.
ELSEIF mseg-werks = '0050' AND NAST-KSCHL = 'WEE4'.
LV_SFORM_NAME = TNAPR-SFORM.
LT_COPIES = MSEG-MENGE.
ELSEIF MKPF-VGART = 'WQ' AND MSEG-BWART = '321'.
IF MSEG-ZEILE <> '0001'.
RETURN.
ENDIF.
SELECT SINGLE * FROM QAMB
WHERE MBLNR = MSEG-MBLNR AND
MJAHR = MSEG-MJAHR.
IF sy-subrc = 0.
SELECT SINGLE * FROM LTBP INTO LV_LTBP
WHERE QPLOS = QAMB-PRUEFLOS AND
MATNR = MSEG-MATNR.
ENDIF.
IF sy-subrc = 0.
SELECT SINGLE * FROM LTBP
WHERE TBNUM = LV_LTBP-TBNUM AND
MATNR = LV_LTBP-MATNR AND
MBPOS = LV_LTBP-MBPOS AND
ELIKZ = '' AND
BESTQ = ''.
ENDIF.
LV_SFORM_NAME = TNAPR-SFORM.
ELSEIF mseg-bestq = 'Q'.
SELECT SINGLE * FROM LTBP
WHERE LGNUM = MSEG-LGNUM AND
TBNUM = MSEG-TBNUM AND
TBPOS = MSEG-TBPOS.
LV_SFORM_NAME = 'ZZEBRA_GRQMLABEL'.
ELSE.
LV_SFORM_NAME = TNAPR-SFORM.
ENDIF.
LT_OUTPUT_OPTIONS-TDIMMED = NAST-DIMME.
LT_OUTPUT_OPTIONS-TDDELETE = NAST-DELET.
LT_OUTPUT_OPTIONS-TDDEST = NAST-LDEST.
LT_OUTPUT_OPTIONS-TDDATASET = NAST-DSNAM.
LT_OUTPUT_OPTIONS-TDSUFFIX1 = NAST-DSUF1.
LT_OUTPUT_OPTIONS-TDSUFFIX2 = NAST-DSUF2.
LT_OUTPUT_OPTIONS-TDARMOD = NAST-TDARMOD.
LT_OUTPUT_OPTIONS-TDCOVER = NAST-TDOCOVER.
IF sy-tcode = 'MB90'.
LT_CONTROL_PARAMETERS-NO_DIALOG = SPACE.
ELSE.
LT_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
ENDIF.
IF NAST-KSCHL = 'WEE4'.
LT_OUTPUT_OPTIONS-TDCOPIES = LT_COPIES.
LT_OUTPUT_OPTIONS-TDGROUP = 'X'.
LT_CONTROL_PARAMETERS-NO_DIALOG = SPACE.
ENDIF.
APPEND LT_CONTROL_PARAMETERS.
APPEND LT_OUTPUT_OPTIONS.
**To get Function Module Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = LV_SFORM_NAME
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = LV_FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CATCH CX_FP_API INTO L_CX_ROOT.
LV_MESS = L_CX_ROOT->GET_TEXT( ).
MESSAGE LV_MESS TYPE 'E'.
ENDIF.
To call SMARTFORM Form
CALL FUNCTION LV_FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = LT_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = LT_OUTPUT_OPTIONS
USER_SETTINGS = SPACE
po_item = ekpo
mat_text = LV_MATERIAL_TEXT
mat_doc_item = mseg
mat_doc_post = mkpf
QM_INSP_LOT = ltbp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_rm07etikett_smartfoHi azman1437.
I see that since an update you haven't been able to scan with your Deskjet 3050A. I try to help with this.
I would suggest by starting with an uinstall/install of your software. Something may have changed how the software is loading on the computer when you attempt to scan.
The other option, is looking for the HPscan application.
Where this is located depends on your computers operating system. To help with that would need to know the OS of the computer.
I hope this helps, thanks for your post.
I worked on behalf of HP. -
Query Selection Screen does not appear in Web Analyzer
Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh KumarDear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind -
BAPI_INSPOPER_RECORDRESULTS:result does not appear in inspection lot...
Hi,
I am using BAPI_INSPOPER_RECORDRESULTS to record inspection lot result at characteristic level.
When I use this BAPI, it does not give me an error.
But the values against each characteristic does not appear in the result field of that characteristic.These are not getting updated. system status shows INSP RREC.
I am passing the result value as "mean-value" field in bapi charresult table..
what is the solution for this?
I am trying BDC for the same purpose in tcode QE51N. but in between there is error msg promp..so BDC is not working after that promp as it is asking for user entry for the mandetory field "Engineer's name"..
Kindly provide the solution..Hi,
maybe QE11 is an option for recording results vai BIM.
Cheers,
S> -
Hi all,
I've installed SolMan 7.0 EHP1 and complete the initial and basic configuration using SOLMAN_SETUP tcode.
Then I connect a satellite system with SMSY tcode and setup the EWA configuration.
Now I want to create a EWA Report manually but when I run the REFRESH_SESSION from SDCCN tcode on satellite system the EarlyWatch Alert for Solution Manager Session does not appear.
Could you please help me?
Thanks in advanced
Moreno1. Did you setuo EWA in SOLMAN for that satelitte System? DSWP->Select the solution->Operations Setup->Solution Monitoring->Early Watch Alert->Setup Early Watch Alert.
2. If you have done this, then goto DSWP->Select the solution->Operations->Solution Monitoring->Early Watch Alert->Just click on the scheduled EWA. It will tell you why the session data is not collected from satelitte system though you ran REFRESH_SESSION at satelitte system.
OR
3. Check whether EWA is active at solman for that solution(Satelitte System).
DSWP->Settings->Solution Monitoring->Early Watch Alert
4. Check maintenace package and EWA is scheduled after you ran REFRESH_SESSION at satellite system(SDCCN), if so, then select the maintance package->click on details button(right side of the screen). Make sure that "Target RFC Destination" under Target System should be Back RFC of Solution Manager.
Hope this may help you.
Regards
Sanjai -
I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.
Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
BPM Application Link does not appear in BPM Workspace (11.1.1.7)
I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
<ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
<ns5:name>StartTask.InitRole1</ns5:name>
<ns1:processRole id="InitRole" name="InitRole1"/>
</ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
OlegFlash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually. -
File Place does not appear on my menu. Neither does Tools Photoshop Image processor.
In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.
Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast. -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.
You'll have to contact the developer about this. Apple doesn't make this app;
-
Media Manager does not appear on my second stb
I downloaded Verizon Media Manager and installed it without problems. When I checked my HD stb the program is listed and I could use it. I do not have any kind of recorder on the network. When I check my non HD stb the VMM does not appear. This is the unit I want to use as it will allow me to play music through the home theater sound system.
So, am I limited because I do not have a recorder or does the feature not work on non HD stb? If this is the case, I might as well delete the program from my PC.
Solved!
Go to Solution.Hi. I apologize for the inconvenience. Unfortunately at this time, the standard def STBs do not work with Media Manager. It doesn't have to be a DVR, but the stb has to be an HD box. If you do not wish to upgrade the STD box at this time and depending on your setup, you can always swap the STBs and move the media manager functionality to where you want it.
-
I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.
Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495 -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
The edit JSP page does not appear...
Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
<h:dataTable
value="#{myBean.myDataList}"
var="myDataItem"
binding="#{myBean.myDataTable}"
>
<h:column>
<f:facet name="header">
<h:outputText value="Ajdi"/>
</f:facet>
<h:commandLink action="#{myBean.editMyData}">
<h:outputText value="#{myDataItem.id}"/>
</h:commandLink>
</h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
private List myDataList;
private HtmlDataTable myDataTable;
private MyData myDataItem;
protected Connection Conn;
// *********************** actions ***********************
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
public String saveMyData() {
try {
updateDataInDB();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
return "listmydata";
// *********************** setter ***********************
public void setMyDataList(List myDataList) {
this.myDataList = myDataList;
public void setMyDataTable(HtmlDataTable myDataTable) {
this.myDataTable = myDataTable;
public void setMyDataItem(MyData myDataItem) {
this.myDataItem = myDataItem;
// *********************** getter ***********************
public List getMyDataList() {
if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
loadMyDataList();
return myDataList;
public HtmlDataTable getMyDataTable() {
return myDataTable;
public MyData getMyDataItem() {
return myDataItem;
// *********************** others ***********************
public void loadMyDataList() {
try {
getDataFromDB();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
void getDataFromDB() throws NamingException, SQLException {
myDataList = new ArrayList();
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
PreStat.execute();
java.sql.ResultSet Rs = PreStat.getResultSet();
while(Rs.next()) {
MyData OneRecord = new MyData();
OneRecord.setId(Rs.getLong(1));
OneRecord.setName(Rs.getString(2));
OneRecord.setValue(Rs.getString(3));
myDataList.add(OneRecord);
void updateDataInDB() throws SQLException, NamingException {
String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
PreStat.setString(1,myDataItem.getName());
PreStat.setString(2,myDataItem.getValue());
PreStat.setLong(3,myDataItem.getId().longValue());
PreStat.execute();
ownGetConnection().commit();
Connection ownGetConnection() throws SQLException, NamingException {
if (Conn == null) {
InitialContext IniCtx = new InitialContext();
DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
Conn = Ds.getConnection();
return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
<h:panelGrid columns="2">
<h:outputText value="Name"/>
<h:inputText id="name" value="#{myBean.myDataItem.name}"/>
<h:outputText value="Value"/>
<h:inputText id="value" value="#{myBean.myDataItem.value}"/>
</h:panelGrid>
<h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>I have put his lines in the faces-config.xml and now it works:
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>editmydata</from-outcome>
<to-view-id>editmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>listmydata</from-outcome>
<to-view-id>listmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
is it right or Do I make a mistake somewhere?
Maybe you are looking for
-
I am trying to use boot camp to partition my mac... and failing.
Every time I try to partition my mac going through the bootcamp steps it keeps telling me that "Your bootable USB drive could not be created, An error occurred while copying the Windows installation files." I found a video that shows how to fix this
-
Can't get surround sound to work while default format is 96000Khz
Hello, I finally figured out that for some reason I can play 5.1 surround sound if I choose the 24bit/48000Kh as the default format from the realtek manager, or for that matter from the Sound control panel. But if i choose the 24bit/96000Kh from the
-
Use of DataGuard in a testing environement
Hi all, whenever an incident occurs on our production system, we import a dump from our production database into our test database to reproduce the incident and to find a solution for the issue. Taking a dump and import this into a test database take
-
How to programmatically change the password of user accounts in PDF Generator
I am using 4 user accounts for multi-thread converting Word documents to PDF in PDF Generator ES3, and I have to update the password of those user accounts. Does PDF Generator ES3 save the password somewhere on the Windows 2008 server? Can I programm
-
How can i know the port of my database?
hello, how can i know the port of my database is working in? ty