Tcode for Central Address Managment
Hi
I've an issue with sending emails to external systems and i beleive i need to set the email address of the sender in central address management. Anyone is asare of how to maintain this email via transaction code only and not by coding !!!
i assume that this is done using SU01. is this correct? kindly guide
thkx
Prabhu
Hi,
Check this,
hope it helps,
Re: RFBIDE00 - Address data issue not populated
Re: T-Code(RZ20)
regards,
Pritha.
Message was edited by:
Pritha Agrawal
Similar Messages
-
CRM - IS-M Central Address Management
Hi Guys,
Can we integrate CRM (7.0) with IS-M Central Address Management.
In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code.
CRM can download standard ERP Regional Structure (Address Management), but I'm not sure if and what type of integration we can have with Media Central Address Management.
Any inputs are welcomed.
Best regards,
Renato PetrulisClose since no answer for so long.
-
PRAA in combination with central address management
Hello,
In our system we have central adress management activated. All the
personell nrs are entered with the correct address (sreetname and
housenumber in 2 separate fields). We use this information to create
the corresponding vendor numbers in FI (transaction PRAA).
However, with transaction PRAA both the address (streetname and
housenumber) are copied into one field (streetname). As a consequence,
the corresponding batch input session, which is using program SAPMF02K,
cannot automatically (in bcakground) create all the vendors, since we
always get a message about central address management. (Streetname does
not exist, because it wrongly contains both the streetname as well as
the housnumber.)
The field USE_ZAV which is automatically ENTERED in the background
processing of the SAPMF02K batch job, is causing this address check.
We think this is a bug.
Ideally the PRAA should be entering the streetname and housnumber in 2
separate fields in FI-vendor master data, of the automatic check of
field USE_ZAV should not be entered in this batch input background
processing.
Can you please give us some advice on how to deal with this situation?
Kind regards
Karinne Van Goethem
SAP Consultant - Holland CasinoXXX
-
CAM - Central Address Management
Hi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business area but not sure are they the correct one??
Thanks & Regards,
SwatHi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business Partner but not sure are they the correct one??
Thanks & Regards,
Swat -
ERP release for Central Contract Management with SRM 7.0 EhP 1
Hi all,
i would like to have clarification with ERP and SRM release combinations regarding SRM 7.0 EhP1.
Indeed, the "Software Component Matrix for SAP SRM 7.0 EHP1", for Operational Contract Management, tells 'EHP 5 for SAP ERP 6.0 required'.
Moreover, in RKT dealing with SRM EhP1 delta overview, ERP 6.0 with EhP5 is mandatory for an upgrade to SRM7.01.
Nevertheless, i would like to have confirmation regarding this point.
We do not want to use PI to execute the Enterprise Services for CCM. So, we intend to switch BF SRM_WSRM_1 on.
But on the ERP side (EhP5), the only BF dealing with Contract Management is LOG_MM_P2PSE_2 which description is about Service Procurement (and more exactly for item hierarchies).
Does it mean we can use SRM 7.01 with ERP 6.0 EhP4 and without PI but only if we do not use Central Contracts with service hierarchies ?
Thank you for your help.
Regards.
Laurent.Hi Laurent,
Yes.
When Central contract was designed in SRM 7.0 with ERP EhP4, it was designed with no service hierarchy. But in SRM 7.01 Central contral was enhanced to handle service hierarchy and it works with ERP EhP5. The problem is when we have SRM 7.01 and ERP EhP4. To handle this complication SRM 7.01 was designed to send flat service lines to EhP4 and lower release even though Central contract in SRM has service hierarchy. So while transfering to ERP EhP4 system in standard, all outlines are not consider for transfer and only service lines (Functional items) are transferred to ERP. To do so user needs to maintain the backend destination information of the connected backend system in table BBP_BACKEND_DEST via SM30 transaction with correct system type (for EhP4 system it will be ERP_4.0 and for EhP5 ERP_5.0). SAP Standard program checks this while XML generation for transfer and if system type is ERP_4.0 system it removes all outlines from temp table before generating the XML data. When it is done, ERP has only service lines in its XML and it does the manupulation to create the replication of central contract.
Master Guide (Including Upgrade Information) - SAP SRM 7.01 states:
"The use of SAP NetWeaver PI is optional but it is required for outbound XML-based messaging or for connecting non-SAP planning or execution systems."
So service hierarchy is possible in SRM 7.01 and ECC 6.04 but only with PI. For other CCM functionalities, SRM 7.01 and ECC 6.04 without PI works fine.
Best regards,
Christian Zeuch -
Tcode for hr position management data
Hi All,
1. what is the tcode for creating HR Position Mangement data.
2. I have to create a lsmw for this HR Position Management data. what is the step by step procedure to create this HR Positon data.
Points will be awarded.
Regards,
vinoth.Hi Amit,
Thanks.
I created positions using the transaction - PO13.
What are the tables in which hr position data is stored?
what are the mandatory fields in creating the position data.
Regards,
vinoth. -
SRM, MDM, ECC integration for central contract management.
Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu JoshiHello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin -
SRM -- MDM -- ECC integration for central contract management for SRM 7.0
Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu JoshiHello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin -
Tcode for plant address in different languages
Hello All,
Need a small n quick help from you all...
Can anyone of u give me transaction that provides plant address in <b>different languages..</b>
I could see config for plants maintenance but could not find its address in different languages...
Thanks,
VikramDear Vikram
To maintain the address of the plant in different language you can follow :
After maintaining the address in english laungauge if you want to maintain the address in french /german then you can slect the tab <b>International version</b>
then select version i.e the langauge and then maintain the address in that langauge.
Or you have to login into that language and maintain there the address ..
Regards
Sunny -
Update to Fax Number Required in Central Address Management
We are on 4.6C, also using SRM. A fax number is incorrect for a specific address in CAM, and needs to be updated. How do I make this change in CAM?
resolved
-
Function Module in Central Address Management
Hi,
Is there any function module which updates a filed in ADRC based on the customer number( KNA1) and again i need to update Email information in ADC6.
Actually i am creating a sales order and need to update Customer master.resolved
-
What are the message types available for Vendor Address?
Hi Everybody,
I need to read the all the change pointers of Vendor Address using the function moudle 'CHANGE_POINTERS_READ'. To call this FM I need to pass Address's Message Type. I am passing ADRMAS as message type. but i am not getting any records into change pointers internal table.
Pls help me out by informing the message type of Vendor Address.
Regards,
Nagaraju MaddiHi,
The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
Check the table <b>TSAD7 for Address groups</b> (central address management)
<b>Reward points</b>
Regards -
Diff. Tcodes for Vendor Master Data
Hi,
We create the Vendor Master through XK01 Tcode...In which 3 window comes...General Data, Company Code Data and Purchasing data...
In General Data, 4 checkbox are there....Address, Control, Payment Transactions and Contact Persons...
Now requirement is this, we want a separate Tcode for Vendor Address which includes Address and Control data only...Also when we save this data, an Request Number should be create for Vendor Number Creation...
Is there any solution for it...Hi,
If you want to control use of check box itself under General Data, then one way is to use of screen variant using SHD0.
Refer the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a070bfbb-d34a-2d10-b092-ecbe0b0d4a4c?QuickLink=index&overridelayout=true
Regds,
CB
Edited by: Channabasappa.K on Jan 16, 2012 11:46 AM -
Anyone know about centarl address management.
hi expert,
nyone know about centarl address management. how to use it in xdo1Hi
Central address Managements stores the data in ADRC and other ADR* tables
These tables contains the entire address details of the Customers.
KNA1 may contain only few but these ADR* like ADRC contains all.
So when you create Customer usinf XD01, if you create address centrally these tables are filled.
Reward points if useful
Regards
Anji -
How can I create a new E-mail address for the Marketing Manager
Hullo,
how can I create a new E-mail address for the Marketing Manager (i.e. marketing professional role in SAP CRM) please.
That when you go and create a new E-mail campaign you need to choose an E-mail form in addition to the E-mail address of the Marketing Manager.
Kind Regards.Hi Alhussien
Add it to his Position in the Organisational Model. Transaction PPOMA_CRM.
Under there address section is an option to populate the email address.
Regards
Arden
Maybe you are looking for
-
How can you get your iphone to connect to the computer
i wanna know how do i connect ma iphone to the computer
-
For some reason or other I can't remember my password for my apple id and when I go to reset it I can't find the email they have sent me.I think they are sending it to my apple email [email protected] which I can't access as they are telling me my pa
-
Hello. I'm trying to add an outer glow to multiple photoshop images that have (at least one) of the same file dimensions as the original photoshop file. I'm doing this by dragging/dropping the original file's outer glow into the new files. But the si
-
Help: New owner of my iPhone getting prompted for my iTunes account.
My wife is now using my old computer and iPhone 3g. 1. In iTunes on the PC, she is logged in. 2. iTunes says she has one app to upgrade. 3. Clicking upgrade, iTunes then shows her account name and says there are no apps to upgrade. 4. Go back to iTun
-
Where to control and give error message before saving trade promotion?
Hi Gurus, our CRM system is upgraded from 5.0 to 7.0 and we have some problems. One of them is, in 5.0 version, we check some conditions and display error message in the AUTHORITY_CHECK method of CRM_MKTPL. So the check is made and message displayed