Tcode for deleting source systems

Dear all,
is there any tcode for deleting source systems in BI 7.0? I tried RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELETE, but these two didn't exist in BI 7.0. Please help. Thanks.
Jin Ming

hi,
chk the below link
How to delete source systems?
Ramesh

Similar Messages

Error deleting source system with error message: "incorrect input for....."

Hi,
I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
"incorrect input for activating transported shadow IPacks"
Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
Please let me know what is the caused of the error and how to solve the problem.
Thanks for your kind help.
Regards,
Mark

Hi Mark,
Which version of BW are you in?
check this thread and also the note 709581
Error Deleting Source system connection
Thanks,
Raj

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

Delete source system fails

I've got a flat file source system definition which I deleted via rsa1 --> source system --> right-click --> delete. it deleted all the dependant objects (transfer rules, psa, EDI config, etc), but the system still shows up in RSA1. There's an entry in table RSBASIDOC referencing this source system (field SLOGSYS), because we manually tried creating a basic idoc type for it (which we now can't delete with tcode WE20 since it's been generated).
Does anyone know off hand how to get rid of the source system in the RSA1 list?
Thanks!
Rich

Hi Rich -
I guess the SAP Note (967999) applies in your case. I've pasted it below for your reference.
Symptom
In the source system tree of the Administrator Workbench (AWB), you use the 'Delete' function in the context menu (right mouse button) for a connected source system.
Even though the system displays success message RSAR 262:
Source system & deleted
at the end in the status line, the source system connection is visible again after the AWB has been updated and the source system connection has not been deleted.
Other terms
Context menu, source system tree, right mouse button, delete source system, RSAR, 262, 620, SLG1, RSAR262, RSAR620, AdminWorkbench
Reason and Prerequisites
This problem is caused by a program error.
An error occurs during the deletion, however the system does not inform you correctly of this at the end, after the deletion process has terminated.
Solution
BW 3.0B
Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available onceNote 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available onceNote 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
Import Support Package 19 for 3.5 (BW3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
Import Support Package 10 for 7.0 (BW7.0 Patch10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Pls assign points if helpful.

Unable to delete Source System in 3.5

Hi Friends,
desperately trying to delete Source System, BW provides this error:
Deleting source system E14_M007 failed -> Check log !
Message no. RSAR620
log:
Objects can only be displayed (change protected)
Message no. RSAR771
System is open , no dea how to proceed.... please HELP
Regards
Joe
Edited by: J.F.B. on Jan 14, 2011 2:49 PM

Hi Colum,
Many tjanks, that is exactly I was looking for. If you should ever stay in my region visit me for some beers
Regards
Joe
Hi Joe,
Good stuff, glad it worked for you!
Rgds,
Colum
Edited by: Colum Cronin on Jan 18, 2011 12:13 PM

What is delete Source system assignment???

Hello All,
If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
If we chosse this option then what will happen? Can i reassign infosource to new souce system after chosing this??
Thanks for reply

Hi,
Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
Edited by: Aduri on Dec 26, 2007 10:08 AM

DELETE SOURCE SYSTEM FORCEFULLY

Hi Experts,
I am working on BW 3.5 had a r/3 source system which has been formatted recently now when i am trying to delete this source system (while going traough RSA1->source system right click delete) it says "deleting source system failed".i ckecked through t.code sm21 "source system BIWDEV not known.i have also tried to delete it through FM RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELTE but nothing is working.There is entry of this source system in RSBASIDOC table.Please help.
Sanjeev

Hi,
try deleting first this pertner profiles with tcode WE20 and then delete the source system....
if this system is not up anymore then delete the part profiles, and the RFC connection
caution; you'll loose all TRules connected to this source system...
hope this helps...
Olivier.

Deleting Source System

Dear friends,
I have some doubts, i was delete one source system to create a new in same system,
when try to create the new same data and objctes there are, what can i do to create a new soure system in the same system but without old objects ( cubos, dso's etc ) ??? i want to retransport all objects again.
Thanks in advance.
Fabrício

Once you delete the source system, the objects which are related to that would be deleted.
you have to re-create it or transport it to the source system.
in RSA1, you have a option to create your source system. Before that, you have to check whether the logical system, RFC connection for the source system are created or not?
Hope this would help you.

Message "Creation of DataSources for SAP source system is not permitted"

Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
Thks

Hii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Delete source systems...

Hello,
When I delete a source system in RSA1 (not used, not existing in SM59) and then refresh the list, the deleted system pops up again. Why is this? How can I fix it? Must I delete the entry directly in source table? Which table contains the source systems?
BR,
F C

Hello,
I have checked all tables and deleted the entries where they existed. However, the problem still persists...! There is no error message when deleting source systems (in RSA1) and at first they disappear. But on refresh, they appear again... Strange...
BR,
F C

How to delete Source system

Dear All,
I have created Logical system and assigned it to client. After that when you go to RSA1 , system automatically creates Source System of BIW .
Now I want to use the different logical system for that I want to delete this automatically created BIW self source system which I am not able to do becuase in Context Menu Delete option is not Visible.
Please guide me immediateley.
regards
Vishal

Hi Vishal,
Refer these posts. Probably they help you!!
Re: How to delete a source system in BW?
Re: Source system deletion
Bye
Dinesh

Error Deleting Source system connection

hi
I was trying to delete a source system from BIW. ( Wanted to start afresh).
But while doing that I get this error:
"Incorrect input for activating transported shadow ipacks"
Can someone tell me how to correct this information.

Hi Murali,
this problem has been fixed with SP20, BW 3.0B. Please see SAP Note 709581 for details.
Regards, Klaus

How to delete source system (popup window)

Hi All,
I want to delete the source system
RSA1 - Source Systems - system and Delete
but for every using "Transfer structure" i receive the popup information window and i have to confirm this window. It takes much time.
Do you know anybody the another solution ?
Thanks in advance for advice
Martin

Martin,
That is the only way. It would ask you to put it in transports and larger the objects longer it takes. There is no other way as far as I know.
Thanks
Shabna

Tcode for deleting source systems

Similar Messages

Maybe you are looking for