Tcode for filling setup tables

Hi experts,
What is the tcode for filling setup tables of 2lis_06_inv ?
Full points will be assigned.
Regards,
Bhadri M.

Hi,
Filling up the set up tables depends on the datasource.
there are different T-codes for the respective extract structures
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Have a look at these discussions:
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
Blogs of Roberto will be useful as well:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
Display Setup Table Data:-
Goto SE11 or SE16 -> MC*SETUP -> F4 you will get all the setup tables choose and display the data
To check completion of dta loading
NPRT t-code... Where u can see the entry with ur user and the Run of ur setup..
Regards
Tg

Similar Messages

Tcode to fill setup tables for application 0CS( Customer Service)

Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...

Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points.

Tcodes for all Setup tables.

Hi all,
Can you give me the list of transaction codes of all the setup tables for their corresponding datasources.
It would be a gr8 help.
Thanks in advance!
Regards,
Vineeta.

Hi,
Transactions to fill setup tables
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Hope this helps.
Thanks,
JituK

What do exactly mean by 'document is lost' while filling setup table

Hi ,
In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table. So my questions are as follows :
1)What exactly do u mean by 'Document is Lost'? (I mean the document entries,will always be there in application tables ).
2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table? (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
Please let me know your opinion on above questions
Regards
Mohit
Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

Hi Mohit,
1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
Hope it clears your doubts.
Thanks.

Down time for 2LIS_03_BX setup table

Hello SDN,
I have data reconcilation issue in my BW server for inventort managenent, for data source 2LIS_03_BX and 2LIS_03_BF. For this I have to refill setup table of 2LIS_03_BX in R3 server. For filling setup table for R3 system I need to ask for down time from cleint
I NEED TO KNOW HOW DO I CALCULATE REQUIRED DOWN TIME FOR FILLING SETUP TABLE FOR DATA SOURCE 2LIS_03_BX.

Dear Pravender,
I understand your statement (" For the complete load, check in how much time you can do initialization? That much down time only you need, later you can fill setup tables for history data and load.") as to follow following steps:
1. In the down time, start initialization without data transfer info package in BIW for 2LIS_03_BF and 2LIS_03_UM.
2. Then during up time (after releasing down time, transactional data posting allowed in R3), fill setup table for 2LIS_03_BX.
3. Run full upload info package for 2LIS_03_BX
4. Start Delta info package for data sources 2LIS_03_BF and 2LIS_03_UM
Let me know if I am right for the above procedures. These steps will allow us take very less down time.
Thanks for the reply
Regards,
Jaydeep
Edited by: Jaydeepsinh Rathore on Sep 4, 2009 8:23 AM

How to fill setup table for Application 18 Customer services

Hi,
How can I fill setup table for application 18.
Regards,
ST

Hi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

Trying to fill setup table for 2LIS_04_P_ARBPL

Hi
I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
Am I missing a step?
Thanks
Pooja

I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
Then I got the message - datasource still contains data to be transferred.
Thanks!

Filling setup tables for 2lis_03_um

hi
i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
its asking Archiving Run . i am trying to give or f4 its not allowing me?
please let me know

Hi Suneel........
Check this thread by Roberto Negro......
Archive run.
Hope this helps.....
Regards,
Debjani.....

Can we select desire fields while filling setup tables?

Hi
When we fill setup tables we have some fields over there on which we can put some conditions & we can fill setup tables for that particular conditions..
Now take example of datasource 2LIS_04_P_COMP..
To fill setup tables I went in tcode OLI4COMP... I want to fill setup tables for some particular date range...
I have only 5 fields in OLI4COMP.. I dont have field Posting date BUDAT there...
I want to refill setup tables by usiing selections range on BUDAT but its not available in OLI4COMP..
How to achieve this?? Please Help..
Regards
Swati

Hello Swati,
You can not do the fill with the date range if there is no entry.
The alternative approach is that you can collect the document which belongs to your date range and then give that selection at the Document selections.
For this you need to check the documents from the base tables of your application.
This will solve your issue. I hope you might have deleted the earlier Setup tables before doing this activity.
Hope this helps.
Thanks

LO-COCKPIT: error in Filling Setup tables

Dear Guru's:
While filling setup tables from tcode: sbiw, I am getting following error:
EXTRACT STRUCTURE NOT ACTIVE OR BW NOT CONNECTED.
Bw is connected with R/3- I also have checked the connection thr' SM59, its working.
And even Extract structure is Active.
Then why this error is coming?
Pls let me kno.
Points will be rewarded.
Thank you.

Are you on Developement? If it is, please go to RSA6, look for the data source, and see if the extract structure is actually active, there may be one or more includes, check each one of them, if everything is fine, I would just reactivate it and move it to quality and production. If that happens only in Production, but it is fine in development, then I would make sure the development and production sytem extract structure matchs. Sometimes, someone modifies the development but never moved it to production. Check the last transport created for that extract structure too.
thanks.
Wond

Tcode for filling setup tables

Similar Messages

Maybe you are looking for