Tcode for listing database in SAP AII 4.0

Hi,
Can anyone tell me what is the Tcode for listing Database in SAP AII 4.0?

If you're looking for a listing of AII 4.0 tables, most are prefixed with "/AIN/". You can go to SE16 and type in /AIN/* in the input field and drop down on it to display the different tables and their descriptions.

Similar Messages

Is there ant standard tcode for list of vendors, suppliers in ECC 6.0

can any body tell me is there ant standard tcode for list of vendors, suppliers in ECC 6.0

Hi
The standard Tcode for list of vendors is S_ALR_87012086 - Vendor List .
Check whether it is helpful to you or not.
Plz assign points if it is helpful.
Regards
Tapan

Tcode for Missing number in sap

Hi Gurus,
Is there any tcode is available in standard SAP to get skipped or missing numbers.
Ex:suppose when creating an invoice, if any update interruption is happened then the system doesnt saves the invoice with that number and that number will be skipped from database.
Regards,
kishore.

Hello,
Use the transaction : S_ALR_87012342
In SD module, the gaps in invoice numbering may be caused normally due to two reasons:
update interruptions - the number is set in to the invoice at the
beginning of the program . If an interruption of the process happens after the assignation of this number, the number has run in the range and cannot be recovered. Update terminations in transaction VF01 and VF04. The billing document number is reserved prior to the update.
After a possible update termination, it cannot be used again.
Update terminations are displayed in transaction SM13. At present, there is no possible solution to this.
Object RV_BELEG is buffered. In this case the performance is improved but these gaps are produced.
Note 19050 provides details on why gaps occur, please also refer to the other attached notes for more info.
Prase

Need to read Hex data format for Handheld device. (SAP AII RFID )

Hello,
we developed a custom screens for packing, unpacking, tag commission.. etc for handheld device for my client. the Serial number field type is /ain/barcode. Its working fine. but for the new system need to read the Hex format. I created a new field in the screen. but the handheld device is not reading the Serial number in Hex format.
Could anyone suggest me how to read Hex data in Handheld devices. We are using Motorola MC9090 Series.
Regards,
Kamal

Hi
Are you using the reader to read an RFID tag or for reading barcodes.
Ideally, if you read an EPC Gen2 RFID tag, for example, the 96 bit encoded EPC is read and that can be converted to its equivalent HEX format for posting the observation to SAP AII.
In case of barcodes, the string is read as is printed on the barcode.

Best practice approach for seperating Database and SAP servers

Hi,
I am looking for a best practice approach/strategy for setting up a distributed SAP landscape i.e separating the database and sap servers. If anyone has some strategies to share.
Thanks very much

I can imagine the most easiest way:
Install a dialog instance on a new server and make sure it can connect nicely to the database. Then shut down the CI on the database server, copy the profiles (and adapt them) and start your CI on the new server. If that doesn't work at the first time you can always restart the CI on the database server again.
Markus

Sales Order Changes - Tcode for Listing

Hi, can anyone advise if there's a specific tcode to list SO changes other than viewing them directly in the SO via VA02/VA03?
Thanks
PP

Hi,
There is no such standard T-code for displaying changes made to a sales order.
You can take help of technical consultant for developing a report using the tables CDHDR & CDPOS (Header & Item respectively) for all the transactional changes made.
Otherwise you can also create a query to display changes & person responsible using these tables.
Regards,
Vijay

Standard tcode for list of BOM & routing

Dear Friends,
Is there any standard report in sap to view entire list of BOM and Routing apart from viewing thru tables MAST,STKO for BOM and POKL for routing
Gvrrus

Dear GVR,
1.You can use CEWB to list down all the BOM and routing available,to execute CEWB,you have to
configure the individual working area in OP77.
2.Check CA51 to list down the routing details of all the materials for specifying the task list type.
3.For finding out all the materials that has a BOM is just goto CS03,press F4 in the field for material
selection,now in the search method serach using material by bill of material,eneter the plant,BOM
usage and remove the maximum no of hits and enter,now you can download this by right clicking and
selecting download.
In my understanding use the step no 3 for a rough checking purpose,but for exact details always use
the tables.
Check and revert back.
Regards
Mangalraj.S

Tcode for list billing for a particular period

hi gurus
I wanted to see particular period's invoices.
is there any transaction code for this transaction ?
please help out in this
regards
raj

Hi
Goto Tcode VF05 and give the payer number, from date and to date and click on 'Further Selection Criteria' on the application tool bar - select the Billing Type required (F1/F2 for invoices F5/F8 for proforma invoices)
and execute. You can select either all documents or only open documents also.
Thanks,
Ravi

Z TCode for Standard SAP Program

Hi all,
Is it allowed by default (by SAP standard rule) to create a Z TCode for the existing standard SAP program? By doing this, I will have two transaction codes for one standard SAP program. One is the existing SAP standard TCode and the other one is the Z (custom) TCode. Both point to the same SAP standard program.
I tried to copy TCode ME22 to ZME22 but I get error message "Transaction code ZME22 not defined" when I tried run it. ZME22 was successfully created (no error) with the same setting as ME22 during copying.
Thanks in advance.
Regards,
Goh Tiam Tjai

Goh,
yes obvoiusly you can create another t-code.
as i want to add more thing which all were missed is that you have to create parameter transaction from se93.
and give default transaction as me22 in your case.
hope now your problem has been resolved.
please mark all good answer.
Amit.

T Code for List of all projects

Hi Friends
Please any one knows the Tcode for list of projects
Thanks
Avadhut

Alternatively you can try these links....
http://www.sap-img.com/project/tcodes-in-sap-project-system.htm
http://www.sap-img.com/project/tcodes-in-sap-project-system-part-2.htm
http://www.sap-img.com/project/tcodes-in-sap-project-system-part-3.htm
Hope this helps...
Regards,
Pradyumna

Alternate Tcode For MIGO

Hello Gurus,
What is the Tcode for listed below other than Migo
Transfer Posting
Place in Storage
Display
cancellation
Goods Issue
Goods Receipt
Remove from storage
Release GR blocked stock
Return Delivery
Subsequent Adjustment
Subsequent Delivery
Regards
Arasukumar

hello Gururs,
Thanks you Immediately Reply
Is there any Tcode for
Place in Storage and
Removal from Storage
Other Than Migo
Regards
Arasukumar

Help in com.sap.aii.af.ra.ms.api.DeliveryException

Hi guys,
I'm doing a complex RFC to JDBC syncronous select scenario, In my BPM the sync send step is showing an error.
The message i'm getting in moni is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The scenario was working fine untill yesterday....Can anyone help me in this regard??
Thanks
Varun

hi varun,
was new patch applied to the system...?
check this for your reference
com.sap.aii.af.ra.ms.api.DeliveryException: Exception in method process ?
regards
Ramesh P

Report or TCode for Completed Service Entry Sheets

Hi, I hope someone can help me here. I want to know the TCode for listing all PO's that have had the Service Entry Sheets completed. Is there such a report? I hope so, we are having difficulty matching invoices where no service entry sheets have been completed. Thanks!

Hi,
Use Report ME2S - Here you will get list of all POs with status against PO, SES Completed and Accepted and Invoice posted with Traffic Light.
Also see report ME2N / ME2M / ME2L with Item Category "D" and Selection Parameter as "WE102" or "WE106".

Service com.sap.aii* does not in service list for PI Post installation

Hi Experts,
When I check the PI post installation, in my visual admin Cluster->Server->Service->Delpoy (Application)
the required service "com.sap.aii* and com.sap.xi*" does not exist in the list. How to deploy these mandatory services to my J2EE server, thanks a lot!
Fil

Check this thread..
Re: Web Service call through XI returns SAP error( QName is 'xmlns'.....)
SAP Note: 886888
Regards
Anand

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Tcode for listing database in SAP AII 4.0

Similar Messages

Maybe you are looking for