Tcode for Mass removal inspe. type

Dear All
I want to remove 09 inspection type from the FERT material. (About 500 materials)
Can i remove through single transaction ?
AYK

Hi,
You can do it from QA08,-Deactivate-inspection type -09
Regards,
Srinivas

Similar Messages

Tcode for mass closure of all the IO's

Hi Expert
Please let me tcode for mass closure of all the IO's instead of using tcode KO02 for individual IO.
REgards
Sachin

Hi,
you can use the transaction KOK4.
Regards,
Greta

Standard tcode for (mass) data change of internal orders or ... ??

Hi!
I really need some info if there by any chance SAP has standard transaction for mass data change of internal orders (more particular, distribution rules in settlement rule section, which can be found in <b>KO02 transaction</b> ).
I am trying to change distribution rules for settlement receivers in <b>settlement rule section</b>, that is finish past distribution rules by filling TO PERIOD and TO FISCAL YEAR fields on the right of each rule, and then entering new rules (which i get from external source -flat file, ms excel, csv...).
If i wanted to import data in SAP i guess i would have to develop a Batch Input. But that would take me some time to develop because it is pretty complicated.
I found tcode KO08 but i do not really know how to use it. Maybe there is another tcode that i am not aware of?
I would appreciate any suggestions!
Thnx, UK

Hi Srilakshimi,
If you are familiar with MASS transaction, then you can modify User Responsible field for Internal Orders from transaction KOK2.
As first step you must create a selection variant in order to define which orders you want to modify. Once selection variant was created, excute transaction with it and you'll get a screen similar to MASS transaction. Select the field you want and massively replace it. Do not forget to save.
Best Regards!
Mgitur

Separate TCode for Mass Change of documents (For authorization purpose)

Hi
We have internal audit function where internal audit chief will remove the payment block of multiple vendor invoices through FBL1N --> Environment --> Mass Change.
Now problem is that authorization for FBL1N is given to 6 more employees (related to AP Accounting). Hence all these employees can do the mass change. I want to restrict this mass change authorization only to one person i.e. internal audit chief.
Please tell me how to bring this restriction.

Hi:
You should contact your basis guy to do so...In tab authorization first you will have to find this object he system will display it , there you can assign 03 in place of *.
Personally i will recommend you should go for creating transaction variant using SHD0 which is an easy way to do so. Please check it will solve your issue. I just did both in test sever both of them are working perfect for me. Mass button is disabled when you set 03 for F_BKPF_KOA. SHD0 meets the subject topic of your post.
Regards

Program or Tcode for Mass upload of vendor.

Hi Guys,
I have some vendors whose vendor number is same in R/3 system and SRM system and their BP number will also be the same as SRM vendor number.
So I would like to replicated some 3 to 4 thousand vendors from SAP R/3 system to SRM system. Is there any program for this.
if so Please suggest.
Regards
Srujan.K
Edited by: srujan K on Apr 20, 2010 1:58 PM

You can use BBPGETVD and provide number range as input.
SG

Tcode for mass upload of cost allocation?

Hi all,
I would like to get a transaction code that will allow me to run a mass upload of cost allocation?
I tried ZFR_COST_ALLOC but the system didnt accept it.
Please help.
Boubacar-Issa

look https://forums.sdn.sap.com/click.jspa?searchID=641178&messageID=2895219
A.

TCode for collective changes in inspection type in Material Master

Hi
Can any one tell me the TCODE for mass changes for inspection type in Material Master.
Charuhas

you can use MM17 or through LSMW or create a BDC through ABAP.
Regards,
qsm sap

I want to change Material Type for mass upload.(MMAM)

hi all,
I want to change Material Type for mass upload.(MMAM)
Suggestion pls? or Any BAPI is availablre?
Edited by: abap_friends on Jan 6, 2011 7:12 AM
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 6, 2011 11:27 AM

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

How can we update insp. type in material master on mass basis.

Hi Team,
We are using LSMW for material master. I was told that we can not update inspection type through LSMW. Is it possible thru LSMW if not, how can we update insp. type in material master on mass basis.
Is there any T-Code to update mass chages for inspection type in material.
Please suggest.
Thanks

Hi,
You can use TCode -QA08.
This Tcode have facility to Inspection Type activation in single / mass material.
Also useful for deactivation, special setting at Inspection Type level.
Regards,
JM

100% Sampling Procedure is not functioning for Prod. Order - Insp.Type:03

Hi Experts,
We have a number of material as SPARE PARTS.
We are creating Production Order for these Spare Parts.
Inspection Type 03 is used for it.
Customization -> Define Default Values for Inspection Type
Sample  100 % Inspection Check Box is activated
Skips Allowed Check Box is activated.
Material Number : 571113211
QM View
Inspection Type 03 is assigned
100 % Inspection Check box is activated (By Customization Setting)
Skips Allowed Check Box is activated (By Customization Setting)
Routing is created for this material .
For the operation 10, Two MIC are assigned.
For Each MIC the 100% SAMPLING PROCEDURE IS ASSIGNED
Production Order is created with Qty. : 80.
System generates the Inspection Lot.
The result recording screen the u201CINSPECT FIELD  SOLLSTPUMF IS 1 ONLY.
It must be 80.
I am able to record only one entry.
As 100 % SAMPLING PROCEDURE IS ASSIGNED TO THE MIC,
THE LOT SIZE OF THE PRODUCTION ORDER MUST BE THE SAME OF SAMPLING SIZE.
For the manual Inspection type, I just assigned the sampling procedure to the MIC in Inspection Plan.
When I created the Inspection lot the Sampling size with Inspection Lot qty of 80,
I am able to enter the result for the specified MIC 80 times.
 It is working fine for manual Insp. Type  89.
With Best Regards,
Raghu Sharma

Hi Rajaram,
Thanks for your prompt reply.
The issue is solved.
This is the requirement of Inprocess Inspection.
I am assigning the MIC in Routing.
Hence I need the Inspection lot as soon as Production Order is released.
In Material Master QM View, Inspection Type 03.
I have deactivated the 100% Inspection Check Box.
The issue is solved.
With Best Regards,
Raghu Sharma

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Mass upload of insp type in mm01

Hi, pls advise how to upload 09 insp type and active button in qm view of material master thru mass upload? pls note that presently same materials are already uploaded with 01 insp type, we want to add one more insp type 09. pls advise how to do the same.

In n QA08>select material plant->go to mass upload tab->enter 09 inspection type->check with change material document * execute-->you will get the list of all material with additional screen where you can select the task list ,check char etc.
-->select all the materials & click on save button
check the message after saving all.

Mass processing Tcode for disaggregation of Prod group plan to Lower levels

is there a TCode to mass disaggregate the sales plan to FG forecast. I am looking for 'Mass Processing' function of what MC76 can do 'Product Group by Product Group.
Such processing should blow thro' intermediate level of Product group & then to next level which would be FERT materials.

is there a TCode to mass disaggregate the sales plan to FG forecast. I am looking for 'Mass Processing' function of what MC76 can do 'Product Group by Product Group.
Such processing should blow thro' intermediate level of Product group & then to next level which would be FERT materials.

API for getting iView name, type, tCode

Hi
I am trying to figure out if there is a way in my program to get iView properties: the iView type (e.g. transaction, Web Dynpro, etc), then if it's a transaction iView to get the tCode for that iView.
I have seen document that tells me I can get the list of iViews in a given PCD location, and I think you can get the properties I mentioned above as such:
// id is the full path of the iView
public void getProperties(IPortalComponentRequest request , String id) throws Exception{
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
env.put(Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_SEMANTICS);
InitialContext iCtx = null;
try {
iCtx = new InitialContext(env);
IiView result = (IiView) iCtx.lookup(id);
result.getAttribute("????");
result.getAttribute("????");
} catch (Exception e) {
throw new Exception (e);
Am I in the right direction?
I don't know what are the names of those attributes I need? - I cannot find them in any Java docs or forum?
I also looked at com.sap.portal.pcm.attributes.IAttriView but that does not appear to have the suitable attributes that I am looking for?
Please help.
Kind regards,
Sharath

Hi
Check theses links
http://help.sap.com/erp2005_ehp_03/helpdata/EN/44/bfb2a470033f45e10000000a114a6b/frameset.htm
https://help.sap.com/javadocs/NW04S/current/index.html
Hope this helps.
Cheers-
Pramod
reward points if helpful.

Inspection lot not getting create for 01 Insp type after Intransit

Hi Qm Gurus,
I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?

Hi ,
Please activate inspection type 08 stock transfer ..
If this inspection type is active then during stock transfer lot gets generated.
Also check QM active for this perticular movement in custamizing setting.
Regards
SANIL

Tcode for Mass removal inspe. type

Similar Messages

Maybe you are looking for