Tcode for Table maintaince

Hi all,
i want to maintian table T009B with some date ranges can somebody help me with the T-code to maintian dates in BW.
thanks
harish

dear Harish,
T009B is table for periods of the fiscal year variants ? you can do rsa1->transfer global setting->in next screen mark fiscal variant checkbox and mode 'update table' and execute.
however, to maintain in bw you can use transaction RSIMG (or SPRO), and expand 'business information warehouse', there is 'maintain fiscal variant'.
to maintain calendar, expand 'global settings'->maintain calendar'.
hope this helps.

Similar Messages

  • Reg : Tcode for table maintance generator

    Hello,
       I have created the Tcode for Table maintance generator of a table using SE93 which directly goes to the table maintaince generator. My requirement is if i open the tcode i  need to display the custom selection screen before going to the table maintaince generator. How do i do it. please can give me the steps to fulfil the above req.
    regards
    haritha

    Check below thread will be useful to you.
    Re: Sending Payment Advice as Email to Vendors
    For more information:
    Search sdn with key words tcode + table maintainence generator
    Regards

  • Creating Tcode for Table

    hi Experts,
      Can any one Help meplz, I'm Venkat,I have doubt in Dictionary .i.e how to create transaction code for database table .when i create Tcode for table in Se93 ,it asks abt progarm name,if i given that name as table name it is giveng run time error.

    Hi
    You can create new Tcode from Tcode SE93
    Fill all the attributes
    Give your custom txn name 'ZTXN'.
    Give the Short text for it .... (This short text will appear if u choose this txn as favourites on SAP Easy access)...
    Select the Object type of your program from the 5 radiobuttons that come up..Select 2nd option if its a report program. Press Enter.
    When you go to the next screen, Enter name of the Program(ZPROG) you are intending to make the transcation for ...
    Save the Transaction.
    Now you can type the transaction ... 'ZTXN' in the command bar that will take you to the selection screen of the program ZPROG...
    Regards

  • How to get Tcode for table which has a table maintenance done

    Hi Friends,
    I have one issue.
    How to get the specific Tcode again for the table  to which i have used table maintenance .
    I have generated table maintenance for many tables inside my package.
    If i want specific Tcode for that particular table how do i find it...Is there any way to get that
    Thanks in advance.
    Regards
    kishore

    Hi Gautham,
    I am still having problem... If i give Z* it shows all the Tcodes created with Z.
    For that i will click Display object list and get my Tcodes inside my package..
    But that is not my issue...
    I am sorry if i didn get you properly
    But still i didn find any way for that.
    Will give one sample table which is Ztest. Ihave tcode ztest1.
    Now as u said if i give Z* i will get all Z* tcodes ..In TSTCP table if i execute iam getting only the Tcode fields
    lot of Z names(tcodes) are there. In that how will i find which is mine.I am not getting any parameter fied in output and all..
    please help me.
    Regards
    kishore

  • TCode for table search

    Can any one suggest me a TCOde,by which we can find out all the tables releted to a tcode in ECC 6.0
    like in sap r/3 4.6B,there was a tcode me49, we  could put there tcode and got all the tables releted to that perticular tcode.

    Hi Jurgen,
    Using this mehode you can get information only about tables which store master data, transactional data (I guess) - no information on customiazing tables, system tables and z-tables.
    In the link above (posted by Gnana Kumar) there's a FM ("RS_PROGRAM_TABLES"; suggested by Rizwana Parveen) which provides all the tables (e.g.T156M, T156N, T156Q, etc) in connection with a transaction.
    It's quite useful (however I got short dump e.g. for MIGO because of too long lines in the (standard) program...)
    Cs.
    Edited by: Csaba Szommer on Aug 3, 2010 9:56 AM

  • How to create a tcode for table maitenance

    i have a ztable which is having a maintenace view now  i have to create a transaction code for the given table maintenance please can anyone give me the details how to create it and what steps i have to follow.

    Hi Suleman,
    1) Go to SE11
    2) In Delivery and Maintenance TAB
    i) Delivery Class as A ( most of the times)
    ii) Data Browser/Table View Maint. as "Display/Maintenance Allowed"
    3) Enter the required fields.
    4) Goto Technical Settings.Enter the appropriate data
    5) Then go to Utilities-->Table Maintenance Generator
    i) Enter the Authorization Group (Varies from project to project...when no authorization required give &NC& )
    ii)Function Group as "Table Name"
    iii)Package varies from project to project
    iv)Maintenance Type as "One Step"
    a)Give overview Screen Number (Your own number..but remember)
    b)Single Screen "Any number"(it can be 0 also)
    6) Then click on the white color create button on menu bar(Create)
    7) To view the maintenance Screen Transaction is SM30(There you need to give the table name)
    8) If you want to change the description of the fields,alignment,mandatory,greying the fields,Validations and many more
    goto SE51 enter program name as "SAPL(TABLE NAME) EX:SAPLZH116 and enter the screen number what you gave in the step 5,iv,a.
    9)If u want to have a transaction to table maintenance
    a)Go to SE93
    b)Choose "Transaction with Parameters" Radio button
    c)Give the Package Name which is given in 5,iii
    d)Give transaction as SM30
    e)Choose Skip Initial Screen
    f)In GUI Support Choose all the three options
    g) In the default values Tab
    Name of the Screen Field Value
    UPDATE X
    VIEWNAME (Enter Table Name)
    After doing this goto se93..in 9(a)
    1.In the home page create a prgm name..
    2.give the description below description choose anyone suitable to ur project
    3.Give the program name and screen number
    4.In sap gui area enable all the check boxes...
    cheers
    Mohinder Singh Chauhan

  • Need information for table maintenance genarator?

    HI Sir,
    I have  a tcode for table maintenance generator of Z table, my requirement is to add new field to that Z table.
    Is it required to maintain table maintenance generator again for that table and how to assign the same tcode for that.
    plz  help me to solve this.
    thanks and regards
    syed
    Basic question. Please put some effort from your side before posting here. You have already been warned against breaking the rules of this forum. Continued violations will lead to account deletion.
    Edited by: kishan P on Sep 2, 2010 11:59 AM

    Hi Taj,
    When you add your new field in the table, the table gets partially active first, then you need to Adjust the table using Database Utility (SE14) to get the table activated.
    For Database Utility see online help [Database Utility|http://help.sap.com/erp2005_ehp_02/helpdata/EN/a4/3790360ee65840e10000009b38f839/frameset.htm]
    Then You need to regenerate the table maintainence Generator.
    Hope this helps.
    Regards
    Abhii
    Edited by: Abhii on Sep 2, 2010 7:06 AM

  • How to create a transaction for table maintanence?

    Hi Experts,
      How can i create a transaction for insert/modify/delete entries for a table?

    Hi,
    First u nee dto create Table maintenace genaertor for that table.
    go to se11.--> table name --> change
    Mebu options: > Utilities> table maintenace gen (or Tcode SE55)
    Fill the following
    Authorisation group : &NC&( or group specified by Functiopnal owner)
    Function group:
    Maintrenace type: 1 step
    Maint screen: 6
    SAVE.
    Now after craeting Table maintenace genarator, u haveto attach tcode.
    Go to SE93
    Give ur tcode  for table.
    Check : Transaction with parameters.
    continue...
    Transaction :   SM30
    check SKIP INITIAL SCREEN
    Check all the check boxes of GUI support.
    under Name of screen field :
    TABLE VIEW             : table name
    UPDATE                    : X
    Rvert back if nay issues.
    Reward with oints if helpful.
    Regards,
    Naveen.

  • Creating Tcode for Custom Table

    Hi all,
              I have created a custom table ZSALESMANAGER, I have created a Maintenance view for this table ZSALESMANAGER_MV. I have to create a custom Tcode for this maintenance. so that when the i enter this tcode i should get the maintenance view scree of the table.
             Please help me, how to do this.
    Thanks & Regards,
    Poorna.

    please  go throught   below link ..... it was  given with  screen  shots  of the   T.code   Creating  for the   table after the   maintaince  view   had been created ......
    <a href="http://">http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm</a>
    <a href="http://">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc</a>
    reward points  if it  is  usefull ...
    Girish

  • HOW TO KNOW THE TCODE FOR CREATING A NEW ENTRY IN A PARTICULAR TABLE

    HI,
        CAN YOU PLEASE LET ME KNOW THE PROCEDURE TO GET THE TCODE FOR CREATING A NEW ENTITY IN A TABLE .
       EG: IS THERE ANY PROCEDURE TO KNOW THAT IF I CREATE A NEW ENTITY IN MM01 IT WILL BE STORED IN TABLE MARA.
    THANKING YOU.

    Hi Venkata,
    If you want to know, for a given table, which transaction/program(s) will create a new record,  there is no easy procedure, other than to refer to experts who deal with these programs.
    It is possible to get a list of programs that refer to a table.  SE11, select the table, select the 'where-used' icon, select programs, execute.  You will be presented with a list of programs that read or write to that table.  From that list you would have to determine which one(s) create records, using your ABAP skills.  From those selected programs you would have to find which, if any, had a transaction assigned.
    Many tables are updated by more than one program/transaction.  Many other tables are not updated by ANY interactive transaction.
    If you ever decide to go ahead with this research, make sure you publish it.  You could probably make yourself a bit of money.
    Regards,
    DB49

  • Tcode for any table

    Hi expert
    I have created a ztable and maintained table maintenance generator . On production server user want a Tcode for particular table that auto maticaly open the screen where data will be posted.
    Thanks
    shekhar

    Hi,
    There is no tcode for any table.
    Itu2019s only other way that u use tables in your transactions.
    Press F1 in the field for which u want the table.
    Then it will show some description... there clicks on technical settings button
    in properties it will show some info including table name....
    Regards,
    Shamma

  • Tcode for setting FI-SL planning: Summary table name

    can any body suggest Tcode for  for setting FI-SL planning: Summary table name.

    Hi,
    Check Tcode : GB01.
    CHECK THESE ALSO,
    GLPLINST.
    GLPLINSTALL.
    THANKS,
    REWARD IF HELPFUL.

  • How to find Tcode for database table

    Hi Gurus,
    I need to find out tcode for Standard SAP table in SCM APO '/SAPAPO/PBMVWT' for maintaining Plannning book text in different languages.
    The problem is that Table maintainance is not maintained so SM30 wont work. I tried Where used list option for table but no tcode or report found using this table..
    Kindly help
    Swapnil

    Hi,
    there is no maintenance txn. If you need to have text in different languages, you need to do it as follows:
    - logon for example once in english
    - goto txn /SAPAPO/SDP8B
    - maintain the text in English and activate the planning book.
    - Logon in the other Language
    - enter /SAPAPO/SDP8B again
    - Type in the text in the other language and activate the Planning book again.
    This will give the planning book language specific texts.
    Best regards
    Rico Frenzel

  • Give me some PP important tables and Tcodes for abapers

    give me some PP important tables and Tcodes for abapers
    thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    10     Production Planning (PP)
    10.1     Work center
         CRHH                    Work center hierarchy
         CRHS                    Hierarchy structure
    CRHD                    Work center header
    CRTX                    Text for the Work Center or Production Resource/Tool
         CRCO                    Assignment of Work Center to Cost Center
         KAKO                    Capacity Header Segment
         CRCA                    Work Center Capacity Allocation
         TC24                    Person responsible for the workcenter
         CRCO                    Allocation of costcentre to workcentre
                 S022                    Order Operation Data for Work Center
    10.2     Routings/operations
         MAPL                    Allocation of task lists to materials
         PLAS                    Task list - selection of operations/activities
         PLFH                    Task list - production resources/tools
         PLFL                    Task list - sequences
         PLKO                    Task list - header
         PLKZ                    Task list: main header
         PLPH                    Phases / suboperations
         PLPO                    Task list operation / activity
         PLPR                    Log collector for tasklists
         PLMZ                    Allocation of BOM - items to operations
    10.3     Bill of material
         STKO                    BOM - header
         STPO                    BOM - item
         STAS                    BOMs - Item Selection
         STPN                    BOMs - follow-up control
         STPU                    BOM - sub-item
         STZU                    Permanent BOM data
         PLMZ                    Allocation of BOM - items to operations
         MAST                    Material to BOM link
         KDST                    Sales order to BOM link
    10.4     Production orders
         AUFK                    Production order headers
         AFIH                    Maintenance order header
         AUFM                    Goods movement for prod. order
         AFKO                    Order header data PP orders
         AFPO                    Order item
         RESB                    Order componenten     
           AFVC                    Order operations
         AFVV                    Quantities/dates/values in the operation
         AFVU                    User fields of the operation
         AFFL                    Work order sequence
         AFFH                    PRT assignment data for the work order(routing)
         JSTO                    Status profile
    JEST                    Object status
         AFRU                    Order completion confirmations
               PRT’s voor production orders
         AFFH                    PRT assignment data for the work order
         CRVD_A               Link of PRT to Document
         DRAW                    Document Info Record
         TDWA                    Document Types
         TDWD                    Data Carrier/Network Nodes
         TDWE                    Data Carrier Type
    10.5     Planned orders
         PLAF                    Planned orders
    10.6     KANBAN
         PKPS                    Kanban identification, control cycle
         PKHD                    Kanban control cycle (header data)
         PKER                    Error log for Kanban containers
    10.7     Reservations
         RESB                    Material reservations
         RKPF                    header
    10.8     Capacity planning
    KBKO                    Header record for capacity requirements
    KBED                    Capacity requirements records
    KBEZ                    Add. data for table KBED (for indiv. capacities/splits)
    10.9     Planned independent requirements
         PBIM                    Independent requirements for material
         PBED                    Independent requirement data
         PBHI                    Independent requirement history
         PBIV                    Independent requirement index
         PBIC                    Independent requirement index for customer req.

  • POV-After creating Tcode for a table SM30 I want F4 Help here

    Hi All,
    After creating Tcode for a table, When I am trying to give table entries thro' this Tcode, I want F4 help for those fields. Apart form assigning "Fixed values" in Domain level how can I achieve this.
    Points Assured.
    Regards,
    Suresh

    Hi,
          You need to create search helps based on this table for each filed or one for all the fields with proper import and export paramters. Or else you can give check table entries for each of the table fields for which you need the F4 help. Check table us assigned to a field using the Foriegn key assignment.
    Best Regards,
    Sesh

Maybe you are looking for