Tcode in S_TCODE Object Error

Hi Experts,
When we are searcing for "Y" Tcode in Menu Tab in "XXX" Role in PFCG,It was not there in menu Tab.
But it was there in S_TCODE Object.S_TCODE Object is maintained one.It was not added manually.
Ex:When I am searcing for SM59 in menu tab,it was not showing any output.But when I given RFC(in find) it displaying all tcodes with RFC name(including SM59 which was not shown when I searched as SM59 ).But it is showing as Service in the place of tcode.
But SM59 was there in S_TCODE Object & it was showing in SUIM & SE16 dump.
Kindly help to solve the above issue.
Regards,
Karthika

I've just noticed you mentioned 'Service' below in your original posting?
"But it is showing as Service in the place of tcode"
(Haven't worked out how to do a quote on here yet so I apologise for the crude entry
Is this on the menu tab that you are seeing the transaction called service please? If so then this would have been added via the authorisation default button instead of the insert transaction button. This can be used to 'hide' a transaction from view of the user (a bit flakey but a final resort sometimes!)
The transaction will have a hand holding a green card icon next to it instead of the usual three-D box.
Table AGR_BUFFI holds this info and not AGR_TCODES or AGR_1251 - are you using SUIM or SE16(N) to search?
Standard SUIM will return the 'SM59' fine but SE16(N) won't.
See you have solved it but I'm not clear what happened yet so I'll keep digging 0;0
Edited by: David Berry on Sep 20, 2010 7:49 PM

Similar Messages

Behaviour of * in S_tcode object

Hello,
does anyone knows the behaviour of * in S_tcode aothorization object.
1) If i assign ME* in S_Tcode in role manually.do i will get auth ME00 and ME01 tcode execution rights.
but in my case i am not able to execute ME01.
Regards
Nilesh

If you give ME* - ME21 then you will get all tcodes starting with ME as you have given a values that supersedes ME21 (ME*)
If you are reporting via SUIM then it is possible that it is reporting transactions that are entered in the menu or evaluating the complete tcodes it sees in object S_TCODE.
I don't have a system in front of me to check right now, but every system I have used will give you access to pass the auth check against S_TCODE for all tx starting with ME if you enter ME* into the S_TCODE object.

Statndard S_TCODE object in unmaintained (yellow) status

Hi Experts,
I came across a role in which standard S_TCODE object is in unmaintained(yellow) status.
Is there any limit to number of Tcodes which can be added under S_TCODE object?
Please help me out to find the reaon.
Thanks,
Mohit

Hi Julius,
Its new to me too Thanks for sharing the notes. I didn't guess and hence said as per my knowledge Limiting the guess to my knowledge.
Thanks agian!!
Rgds,
Raghu

"object reference not set to an instance of an object" error while running ssrs report locally

Hi Folks,
I am a bit new to SSRS.
I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
But while running the report I am getting "object reference not set to an instance of an object" error.
For a note I am trying execute the report locally.
Any help would be highly appreciable.
sarat chandra sahoo

Sorry for late reply Sinaloe..
I have added a dll file in my report reference. And in a textbox trying to execute this below.
=Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
where Getstring() is a static method in the dll.
I guess some configuration setting I am missing here.
1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
sarat chandra sahoo

S_TCODE object is not coming in role after adding profile of another role.

Dear Gurus,
I have added profile of a existed role to a newly created role in pfcg (edit->insert authorisation-> from profile), but I can't see the S_TCODE object of that role of the added profile.
For some roles, it appears, but for some, it don't come.
Please let me know the reason behind this, so that I can go forward.
Regards,
Nilutpal.

Hi,
S_TCODE will be added in your authorization profile when you add some T-Codes in Menu Tab of that role in PFCG.
This may be the case for your role. In this case it will not be copied with profile. It will be added only if you add the T-Code in Menu Tab.
The other case is if you directly insert it in bthe authorization objects. In this case it will be copied with profile.
Please revert.
Regards,
Jaya

Standard S_TCODE object showing Yellow trafic light

Hi All,
Recently I have noticed standard s_tcode object is showing Yellow traffic light (Not fully maintained) in one of the role in ECC6 system. I have tried to maintain by clicking on change button which usually doing with other objects and got succeeded to do modifications.
I have downloaded that role and uploaded in to another ECC6 system and observed that s_tocde is in green color and not allowed me to modify it as usual.
As per my knowledge standard s_tocde object is not modifiable but we can modify manually inserted s_tcode object.
Please advice.
Regards,
Sri Vandan.

Hi,
What happens if you delete the role in your original system and re-upload and generate?
I have tried that one also but getting same problem.
propably the SU24 entries have been changed (for field S_TCODE) since the last mergeing of authorization data....
Bernhard, can you please elaborate on this.
Regards,
Sri Vandan.

CO OBJECT ERROR IN MIRO FOR UNPLANNED DEL COST

Dear Friends
I m facing one error in MIRO can u guide me in that context.
well in MIRO i m postin Unplanned deliver cost.......and it is asking me assignment to this G/L for Cost center object..
ERROR: Account 40201070 requires an assignment to a CO object
..I have already assigned the Cost center for the G/l in OKB9 is there anything else has to be done
Actually we have 4 plants and 4 Business area i.e whenever i am doing any posting for BW01 -and Business Area BA01 My cost center BW01402 will get hit similarly for other plant and Business are Cost center has been assigned in OKB9 in Details per business Area,is it the right method or anything else has to be done.
Actually in OKB9 i have maintained that GL and in Detail per business area i have maintained cost center per business area
we have assigned the right Cost senter only i.e for different Plant and differenct business area we have asigned different cost center.
Then y i m getting error i m not understanding..
Please guide me in this context.
Also i am trying other method of posting Freight (unplanned delviery cost ) as well as labour charge through ACTIVATING -"Activate Direct Posting to G/L Accounts and Material Accounts"
So that for particular G/L I can Debt or credit that account,in which will doing MIRO G/L Tab gets activated ,i m entering G/L and entering amount for freight and Labor is this the correct procedure.
Regards
shailesh

I have already assigned this G/L as primary cost element in FS00 and in OKB9 also Cost center is assigned as per Business Area as mentioned in the thread
i.e we have 4 plants and 4 business area so we assigned 4 cost centers to 4 business area, so whenver i m postin unplanned delivery cost for a particular plant then my GL should hit with proper cost center but still it is asking for CO OBJECT
ERROR IS:
"Account 40201070 requires an assignment to a CO object"
If i maintained the default Cost center in FS00 in cost element then it doesnt give error but my requirement is that for a particular plant ,and business are only cost area assigned to it should hit
Any other solutions.
Thankz and regards
Shailesh

"Invalid Annotation Object" error

I'm using Windows XP Pro (SP3) on a 2.66 GHz, 2 GB RAM computer, and while working in an Adobe Acrobat 9 document, I had just saved the file (CTRL+S) and the document froze and I got a Windows error box that asked if I wanted to send an error report, which I did. When I opened Adobe again, it asked if I wanted to open the last file which didn't save correctly, which I did.
Then when I proceeded to work in the document and tried to highlight a sentence I was going to delete, I got an Adobe Acrobat popup box that said "Invalid Annotation Object. OK" but no matter how many times I clicked on "OK," the box kept popping up and wouldn't go away. I tried saving a copy of the document, but the same box was in it and wouldn't go away. I couldn't even work in the document to extract pages or anything else. Huge problem!
Does anyone know what can I do to resolve this problem? (This happened on a Saturday when Adobe phone support is not accessible.)

On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
- first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
(for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
- then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
Here is a technique for identifying all the pages that have invalid annotation objects on them:
1. Document > Extract Pages ...
•Select the checkbox for "Extract Pages As Separate Files"
•Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
•Click OK.
2. During the extraction, click OK in all the message boxes that appear.
3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
- after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
- I then combined the 95 good extracted pages into a new file name .pdf
- then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
- delete the bad file.
Hope this helps someone.

Adobe "Invalid annotation object" error

We recieve a specific error message on a few PDFs. Some from documents converted from 2007 Word and others out of Outlook 2007 through the PDF print function. While moving the mouse over certain comments the users has placed on the document in the PDF format, Acrobat 9.9.3 throws this error. We've tried to delete the bad refs and other times have just started a new document, print to PDF while starting over. Any ideas on why this is happining, what might be causing this and what we can do to reslove this problem. I cannot seem to duplicate the problem a few see. Any thoughts or solutions would be greatly appreciated. Best regards, Brian

On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
- first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
(for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
- then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
Here is a technique for identifying all the pages that have invalid annotation objects on them:
1. Document > Extract Pages ...
•Select the checkbox for "Extract Pages As Separate Files"
•Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
•Click OK.
2. During the extraction, click OK in all the message boxes that appear.
3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
- after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
- I then combined the 95 good extracted pages into a new file name .pdf
- then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
- delete the bad file.
Hope this helps someone.

Many db objects error after Upgrate EBS 12.1.1 to EBS 12.1.2(7303033)

many db objects error after apply patch 7303033
Error db objects
APPS.ENGECOBO
APPS.OKL_REVERSE_CONTRACT_PVT
APPS.OKL_GENERATE_ACCRUALS_PUB
APPS.OKL_PROCESS_TMPT_SET_PVT_W
APPS.OKL_TRANS_CONTRACTS_PVT_W
APPS.OKL_TRANSACTION_PVT_W
APPS.OKL_CONTRACT_PVT
APPS.OKL_GENERATE_ACCRUALS_PVT_W
APPS.OKL_LA_JE_PUB
APPS.OKL_TRANSACTION_PUB
APPS.OKL_GENERATE_ACCRUALS_PVT
APPS.OKL_AM_ASSET_DISPOSE_PVT
APPS.OKL_AM_ASSET_RETURN_PVT
APPS.OKL_CS_WF
APPS.OKL_FUNDING_WF
APPS.OKL_LA_JE_PVT
APPS.OKL_INTEREST_CALC_PVT
APPS.OKL_LOSS_PROV_PVT
APPS.OKL_MISC_TRANS_PVT
APPS.OKL_MASS_REBOOK_PVT
APPS.OKL_AM_LEASE_LOAN_TRMNT_PVT
APPS.OKL_AM_LOAN_TRMNT_PVT
APPS.OKL_AM_LEASE_TRMNT_PVT
APPS.OKL_RELEASE_PVT
APPS.OKL_AM_QUOTES_WF
APPS.OKL_REV_LOSS_PROV_PVT
APPS.OKL_SPLIT_CONTRACT_PVT
APPS.OKL_LA_STREAM_PVT
APPS.OKL_SPLIT_ASSET_PVT
APPS.OKL_TRANS_CONTRACTS_PVT
APPS.OKL_AM_TERMNT_QUOTE_PVT
APPS.OKL_CS_TRANSFER_ASSUMPTION_PVT
APPS.OKL_PROCESS_TMPT_SET_PVT
APPS.OKL_TRANSACTION_PVT
APPS.OKL_VARIABLE_INTEREST_PVT
APPS.OKL_GENERATE_ACCRUALS_PUB_W
APPS.OKL_TRANS_CONTRACTS_PUB_W
APPS.OKL_TRX_CONTRACTS_PUB_W
APPS.OKL_TRANSACTION_PUB_W
APPS.OKL_PROCESS_TMPT_SET_PUB_W
APPS.OKL_CS_PRINCIPAL_PAYDOWN_PVT
APPS.EAM_PROCESS_WO_PVT
APPS.OKL_AM_CNTRCT_LN_TRMNT_PVT
APPS.OKL_SERVICE_INTEGRATION_PVT
APPS.OKL_PERIOD_SWEEP_PVT
APPS.OKL_SEC_AGREEMENT_PVT
APPS.IGS_FI_CREDIT_PVT
APPS.FFP55366_01011990
APPS.FFP51404_01011997
APPS.FFP51848_01011990
APPS.FFP55358_01011990
APPS.FFP55370_01011990
APPS.FFP50529_01011900
APPS.FFP50775_01011900
APPS.FFP52681_01071999
APPS.FFP50533_01011900
APPS.FFP55069_01011990
APPS.FFP50531_01011900
APPS.FFP55060_01011990
APPS.FFP51840_01011990
APPS.FFP55372_01011990
APPS.FFP50773_01011900
APPS.FFP55067_01011990
APPS.FFP53497_01012001
APPS.FFP51406_01011997
APPS.FFP52621_01011996
APPS.FFP52090_01011990
APPS.FFP55065_01011990
APPS.FFP53540_01012001
APPS.FFP51837_01011990
APPS.FFP55364_01011990
APPS.FFP52115_01011990
APPS.FFP50506_01011900
APPS.FFP53477_01012001
APPS.FFP55375_01011990
APPS.FFP50508_01011900
APPS.FFP50512_01011900
APPS.FFP52744_01071999
APPS.FFP50510_01011900
APPS.FFP52724_01071999
APPS.FFP55355_01011990
APPS.FFP55058_01011990
APPS.FFP54406_01011995
APPS.FFP54413_01011995
APPS.FFP50577_01011900
APPS.FFP51867_01011990
APPS.FFP51411_01011999
APPS.FFP51887_01011990
APPS.FFP54398_01011995
APPS.FFP50576_01011900
APPS.FFP54411_01011995
APPS.FFP54409_01011995
APPS.FFP54520_01011995
APPS.FFP52481_01010001
APPS.FFP52683_01071999
APPS.FFP50527_01011900
APPS.FFP51843_01011990
APPS.FFP54474_01011995
APPS.FFP55062_01011990
APPS.FFP55361_01011990
APPS.CSC_ACTION_ASSEMBLER_PVT_W
FLOWS_010500.ImportExport
FLOWS_010500.ImportExport
PUBLIC.WWV_FLOW_LIST_OF_VALUES_DATA
PUBLIC.WWV_FLOW_LISTS_OF_VALUES$
PUBLIC.WWV_FLOW_GENERIC
PUBLIC.WWV_FLOW_FIELD_TEMPLATES
RE.RE_PROFILER
APPS.FFP58914_01010001
APPS.FFP58915_01010001
APPS.FFP58920_01010001
APPS.FFP58919_01010001
APPS.OKL_PROP_TAX_ADJ_PVT
APPS.OKL_PROCESS_PPD_PVT
APPS.OKL_STREAM_MIGRATION_PVT
APPS.FFP53720_01011990
APPS.FFP51846_01011990
APPS.FFP51888_01011990
APPS.FFP55078_01011990
APPS.FFP59117_01011990
APPS.FFP59110_01011990
APPS.FFP59131_01011990
APPS.FFP51844_01011990
APPS.FFP56331_01011990
APPS.FFP54827_01012000
APPS.FFP55070_01011990
APPS.FFP56324_01011990
APPS.FFP50523_01011900
APPS.FFP57220_01012000
APPS.FFP55080_01011990
APPS.FFP59112_01011990
APPS.FFP50522_01011900
APPS.FFP55330_01011998
APPS.FFP51850_01011990
APPS.FFP50928_01011997
APPS.FFP56326_01011990
APPS.FFP51838_01011990
APPS.FFP56333_01011990
APPS.FFP50583_01011900
APPS.FFP56716_01012001
APPS.FFP51906_01011990
APPS.FFP54824_01012000
APPS.FFP59175_01012004
APPS.FFP55063_01011990
APPS.FFP59273_01012004
APPS.FFP57215_01011999
APPS.FFP54518_01011995
APPS.FFP54525_01011995
APPS.FFP55367_01011990
APPS.FFP55079_01011990
APPS.FFP51068_01011997
APPS.FFP59195_01011990
APPS.FFP56739_01011999
APPS.FFP59111_01011990
APPS.FFP51849_01011990
APPS.FFP56325_01011990
APPS.FFP54909_01011990
APPS.FFP55077_01011990
APPS.FFP56332_01011990
APPS.FFP54912_01011990
APPS.FFP59116_01011990
APPS.FFP59192_01011990
APPS.FFP59200_01011990
APPS.FFP59115_01011990
APPS.FFP56053_01012000
APPS.FFP59251_01012004
APPS.FFP54394_01011995
APPS.FFP56329_01011990
APPS.FFP55331_01011998
APPS.FFP56323_01011990
APPS.FFP56330_01011990
APPS.FFP56322_01011990
APPS.FFP55359_01011990
APPS.FFP58907_01010001
APPS.FFP53224_01011999
APPS.FFP1915_01010001
APPS.FFP55373_01011990
APPS.FFP55240_26121999
APPS.FFP56596_01012001
APPS.FFP57190_01012000
APPS.FFP54407_01011995
APPS.FFP56052_01012000
APPS.FFP55328_01011998
APPS.FFP54414_01011995
APPS.FFP55356_01011990
APPS.FFP54393_01011995
APPS.FFP54449_01011995
APPS.FFP56337_01011995
APPS.FFP54524_01011995
APPS.FFP1919_01010001
APPS.FFP56434_01012001
APPS.FFP58163_01011951
APPS.FFP56056_01012000
APPS.FFP54404_01011995
APPS.FFP54523_01011995
APPS.FFP58909_01010001
APPS.FFP58908_01010001
APPS.FFP1918_01010001
APPS.FFP58906_01010001
APPS.FFP58913_01010001
APPS.FFP58912_01010001
APPS.FFP54823_01012000
APPS.FFP51841_01011990
APPS.FFP50581_01011900
APPS.FFP55306_01011995
APPS.FFP50525_01011900
APPS.FFP59191_01011990
APPS.FFP59114_01011990
APPS.FFP51966_01011998
APPS.FFP56321_01011990
APPS.FFP57217_01012000
APPS.FFP56328_01011990
APPS.FFP50524_01011900
APPS.FFP57196_01012000
APPS.FFP55362_01011990
APPS.FFP59113_01011990
APPS.FFP57216_01012000
APPS.FFP59176_01012004
APPS.FFP55243_26121999
APPS.FFP56327_01011990
APPS.FFP57126_01011995
APPS.FFP55333_01011998
APPS.FFP54403_01011995
APPS.FFP55368_01011990
APPS.FFP54522_01011995
APPS.FFP54948_01011990
APPS.FFP57125_01011995
APPS.FFP54521_01011995
APPS.FFP1916_01010001
APPS.FFP1917_01010001
APPS.FFP58911_01010001
APPS.FFP58918_01010001
APPS.FFP58910_01010001
APPS.FFP60555_01010001
APPS.FFP60587_01011990
APPS.FFP60588_01011990
APPS.FFP60589_01011990
APPS.FFP60591_01011990
APPS.FFP60592_01011990
APPS.FFP60593_01011990
APPS.FFP60606_01011990
APPS.FFP60607_01011990
APPS.FFP60793_01012004
APPS.FFP60833_01012000
HERMAN.RDT_1
APPS.FFP60943_01011990
APPS.FFP60944_01011990
APPS.FFP60963_01012000
APPS.FFP60964_01012000
APPS.OKL_AM_BAL_WRITEOFF_PVT
APPS.OKL_LA_SALES_TAX_PVT
APPS.FFP61156_01010001
APPS.FFP61138_01010001
APPS.FFP61170_01010001
APPS.FFP61152_01010001
APPS.FFP61124_01010001
APPS.FFP61277_01011951
APPS.FFP61440_01011990
APPS.FFP52982_01010001
APPS.FFP61511_01012000
APPS.FFP61532_01011990
APPS.OKL_MULTIGAAP_ENGINE_PVT
APPS.XLA_00707_AAD_C_000026_PKG
APPS.XLA_20065_AAD_C_000030_PKG
APPS.FSAH_DUPLICATE_PKG
APPS.FFP61884_01010001
APPS.FFP61924_01010001
APPS.FFP61920_01010001
APPS.FFP61867_01010001
APPS.FFP61871_01010001
APPS.FFP61926_01010001
APPS.FFP61912_01010001
APPS.FFP61897_01010001
APPS.FFP61919_01010001
APPS.XLA_00707_AAD_C_000044_PKG
APPS.MSD_DEM_OBI_DEMANTRA_MV
APPS.FFP62356_01012000
APPS.FFP62357_01012000
APPS.FFP62358_01012000
APPS.FFP62359_01012000
APPS.FFP62376_01012000
APPS.FFP62377_01012000
APPS.FFP62378_01012000
APPS.FFP62379_01012000
CA.F
CA.G

user8019167 wrote:
many db objects error after apply patch 7303033
Error db objects
APPS.ENGECOBO
APPS.OKL_REVERSE_CONTRACT_PVT
APPS.OKL_GENERATE_ACCRUALS_PUB
APPS.OKL_PROCESS_TMPT_SET_PVT_W
APPS.OKL_TRANS_CONTRACTS_PVT_W
APPS.OKL_TRANSACTION_PVT_W
APPS.OKL_CONTRACT_PVT
APPS.OKL_GENERATE_ACCRUALS_PVT_W
APPS.OKL_LA_JE_PUB
APPS.OKL_TRANSACTION_PUB
APPS.OKL_GENERATE_ACCRUALS_PVT
APPS.OKL_AM_ASSET_DISPOSE_PVT
APPS.OKL_AM_ASSET_RETURN_PVT
APPS.OKL_CS_WF
APPS.OKL_FUNDING_WF
APPS.OKL_LA_JE_PVT
APPS.OKL_INTEREST_CALC_PVT
APPS.OKL_LOSS_PROV_PVT
APPS.OKL_MISC_TRANS_PVT
APPS.OKL_MASS_REBOOK_PVT
APPS.OKL_AM_LEASE_LOAN_TRMNT_PVT
APPS.OKL_AM_LOAN_TRMNT_PVT
APPS.OKL_AM_LEASE_TRMNT_PVT
APPS.OKL_RELEASE_PVT
APPS.OKL_AM_QUOTES_WF
APPS.OKL_REV_LOSS_PROV_PVT
APPS.OKL_SPLIT_CONTRACT_PVT
APPS.OKL_LA_STREAM_PVT
APPS.OKL_SPLIT_ASSET_PVT
APPS.OKL_TRANS_CONTRACTS_PVT
APPS.OKL_AM_TERMNT_QUOTE_PVT
APPS.OKL_CS_TRANSFER_ASSUMPTION_PVT
APPS.OKL_PROCESS_TMPT_SET_PVT
APPS.OKL_TRANSACTION_PVT
APPS.OKL_VARIABLE_INTEREST_PVT
APPS.OKL_GENERATE_ACCRUALS_PUB_W
APPS.OKL_TRANS_CONTRACTS_PUB_W
APPS.OKL_TRX_CONTRACTS_PUB_W
APPS.OKL_TRANSACTION_PUB_W
APPS.OKL_PROCESS_TMPT_SET_PUB_W
APPS.OKL_CS_PRINCIPAL_PAYDOWN_PVT
APPS.EAM_PROCESS_WO_PVT
APPS.OKL_AM_CNTRCT_LN_TRMNT_PVT
APPS.OKL_SERVICE_INTEGRATION_PVT
APPS.OKL_PERIOD_SWEEP_PVT
APPS.OKL_SEC_AGREEMENT_PVT
APPS.IGS_FI_CREDIT_PVT
APPS.FFP55366_01011990
APPS.FFP51404_01011997
APPS.FFP51848_01011990
APPS.FFP55358_01011990
APPS.FFP55370_01011990
APPS.FFP50529_01011900
APPS.FFP50775_01011900
APPS.FFP52681_01071999
APPS.FFP50533_01011900
APPS.FFP55069_01011990
APPS.FFP50531_01011900
APPS.FFP55060_01011990
APPS.FFP51840_01011990
APPS.FFP55372_01011990
APPS.FFP50773_01011900
APPS.FFP55067_01011990
APPS.FFP53497_01012001
APPS.FFP51406_01011997
APPS.FFP52621_01011996
APPS.FFP52090_01011990
APPS.FFP55065_01011990
APPS.FFP53540_01012001
APPS.FFP51837_01011990
APPS.FFP55364_01011990
APPS.FFP52115_01011990
APPS.FFP50506_01011900
APPS.FFP53477_01012001
APPS.FFP55375_01011990
APPS.FFP50508_01011900
APPS.FFP50512_01011900
APPS.FFP52744_01071999
APPS.FFP50510_01011900
APPS.FFP52724_01071999
APPS.FFP55355_01011990
APPS.FFP55058_01011990
APPS.FFP54406_01011995
APPS.FFP54413_01011995
APPS.FFP50577_01011900
APPS.FFP51867_01011990
APPS.FFP51411_01011999
APPS.FFP51887_01011990
APPS.FFP54398_01011995
APPS.FFP50576_01011900
APPS.FFP54411_01011995
APPS.FFP54409_01011995
APPS.FFP54520_01011995
APPS.FFP52481_01010001
APPS.FFP52683_01071999
APPS.FFP50527_01011900
APPS.FFP51843_01011990
APPS.FFP54474_01011995
APPS.FFP55062_01011990
APPS.FFP55361_01011990
APPS.CSC_ACTION_ASSEMBLER_PVT_W
FLOWS_010500.ImportExport
FLOWS_010500.ImportExport
PUBLIC.WWV_FLOW_LIST_OF_VALUES_DATA
PUBLIC.WWV_FLOW_LISTS_OF_VALUES$
PUBLIC.WWV_FLOW_GENERIC
PUBLIC.WWV_FLOW_FIELD_TEMPLATES
RE.RE_PROFILER
APPS.FFP58914_01010001
APPS.FFP58915_01010001
APPS.FFP58920_01010001
APPS.FFP58919_01010001
APPS.OKL_PROP_TAX_ADJ_PVT
APPS.OKL_PROCESS_PPD_PVT
APPS.OKL_STREAM_MIGRATION_PVT
APPS.FFP53720_01011990
APPS.FFP51846_01011990
APPS.FFP51888_01011990
APPS.FFP55078_01011990
APPS.FFP59117_01011990
APPS.FFP59110_01011990
APPS.FFP59131_01011990
APPS.FFP51844_01011990
APPS.FFP56331_01011990
APPS.FFP54827_01012000
APPS.FFP55070_01011990
APPS.FFP56324_01011990
APPS.FFP50523_01011900
APPS.FFP57220_01012000
APPS.FFP55080_01011990
APPS.FFP59112_01011990
APPS.FFP50522_01011900
APPS.FFP55330_01011998
APPS.FFP51850_01011990
APPS.FFP50928_01011997
APPS.FFP56326_01011990
APPS.FFP51838_01011990
APPS.FFP56333_01011990
APPS.FFP50583_01011900
APPS.FFP56716_01012001
APPS.FFP51906_01011990
APPS.FFP54824_01012000
APPS.FFP59175_01012004
APPS.FFP55063_01011990
APPS.FFP59273_01012004
APPS.FFP57215_01011999
APPS.FFP54518_01011995
APPS.FFP54525_01011995
APPS.FFP55367_01011990
APPS.FFP55079_01011990
APPS.FFP51068_01011997
APPS.FFP59195_01011990
APPS.FFP56739_01011999
APPS.FFP59111_01011990
APPS.FFP51849_01011990
APPS.FFP56325_01011990
APPS.FFP54909_01011990
APPS.FFP55077_01011990
APPS.FFP56332_01011990
APPS.FFP54912_01011990
APPS.FFP59116_01011990
APPS.FFP59192_01011990
APPS.FFP59200_01011990
APPS.FFP59115_01011990
APPS.FFP56053_01012000
APPS.FFP59251_01012004
APPS.FFP54394_01011995
APPS.FFP56329_01011990
APPS.FFP55331_01011998
APPS.FFP56323_01011990
APPS.FFP56330_01011990
APPS.FFP56322_01011990
APPS.FFP55359_01011990
APPS.FFP58907_01010001
APPS.FFP53224_01011999
APPS.FFP1915_01010001
APPS.FFP55373_01011990
APPS.FFP55240_26121999
APPS.FFP56596_01012001
APPS.FFP57190_01012000
APPS.FFP54407_01011995
APPS.FFP56052_01012000
APPS.FFP55328_01011998
APPS.FFP54414_01011995
APPS.FFP55356_01011990
APPS.FFP54393_01011995
APPS.FFP54449_01011995
APPS.FFP56337_01011995
APPS.FFP54524_01011995
APPS.FFP1919_01010001
APPS.FFP56434_01012001
APPS.FFP58163_01011951
APPS.FFP56056_01012000
APPS.FFP54404_01011995
APPS.FFP54523_01011995
APPS.FFP58909_01010001
APPS.FFP58908_01010001
APPS.FFP1918_01010001
APPS.FFP58906_01010001
APPS.FFP58913_01010001
APPS.FFP58912_01010001
APPS.FFP54823_01012000
APPS.FFP51841_01011990
APPS.FFP50581_01011900
APPS.FFP55306_01011995
APPS.FFP50525_01011900
APPS.FFP59191_01011990
APPS.FFP59114_01011990
APPS.FFP51966_01011998
APPS.FFP56321_01011990
APPS.FFP57217_01012000
APPS.FFP56328_01011990
APPS.FFP50524_01011900
APPS.FFP57196_01012000
APPS.FFP55362_01011990
APPS.FFP59113_01011990
APPS.FFP57216_01012000
APPS.FFP59176_01012004
APPS.FFP55243_26121999
APPS.FFP56327_01011990
APPS.FFP57126_01011995
APPS.FFP55333_01011998
APPS.FFP54403_01011995
APPS.FFP55368_01011990
APPS.FFP54522_01011995
APPS.FFP54948_01011990
APPS.FFP57125_01011995
APPS.FFP54521_01011995
APPS.FFP1916_01010001
APPS.FFP1917_01010001
APPS.FFP58911_01010001
APPS.FFP58918_01010001
APPS.FFP58910_01010001
APPS.FFP60555_01010001
APPS.FFP60587_01011990
APPS.FFP60588_01011990
APPS.FFP60589_01011990
APPS.FFP60591_01011990
APPS.FFP60592_01011990
APPS.FFP60593_01011990
APPS.FFP60606_01011990
APPS.FFP60607_01011990
APPS.FFP60793_01012004
APPS.FFP60833_01012000
HERMAN.RDT_1
APPS.FFP60943_01011990
APPS.FFP60944_01011990
APPS.FFP60963_01012000
APPS.FFP60964_01012000
APPS.OKL_AM_BAL_WRITEOFF_PVT
APPS.OKL_LA_SALES_TAX_PVT
APPS.FFP61156_01010001
APPS.FFP61138_01010001
APPS.FFP61170_01010001
APPS.FFP61152_01010001
APPS.FFP61124_01010001
APPS.FFP61277_01011951
APPS.FFP61440_01011990
APPS.FFP52982_01010001
APPS.FFP61511_01012000
APPS.FFP61532_01011990
APPS.OKL_MULTIGAAP_ENGINE_PVT
APPS.XLA_00707_AAD_C_000026_PKG
APPS.XLA_20065_AAD_C_000030_PKG
APPS.FSAH_DUPLICATE_PKG
APPS.FFP61884_01010001
APPS.FFP61924_01010001
APPS.FFP61920_01010001
APPS.FFP61867_01010001
APPS.FFP61871_01010001
APPS.FFP61926_01010001
APPS.FFP61912_01010001
APPS.FFP61897_01010001
APPS.FFP61919_01010001
APPS.XLA_00707_AAD_C_000044_PKG
APPS.MSD_DEM_OBI_DEMANTRA_MV
APPS.FFP62356_01012000
APPS.FFP62357_01012000
APPS.FFP62358_01012000
APPS.FFP62359_01012000
APPS.FFP62376_01012000
APPS.FFP62377_01012000
APPS.FFP62378_01012000
APPS.FFP62379_01012000
CA.F
CA.GThe FFP packages are fastformula packages that were invalidated after running the HRGLOBAL driver and will compile normally with adadmin
as for the remaining formulas they will not compile with adadmin for some reason, and you have to open each package and re-compile the packages it refferences even if they are valid.
reffer to Oracle document [ID 1065445.1] ENGFDECN ECO Form When Try to Tab out of Field ECO Number, get FRM-40735: WHEN-VALIDATE_ITEM trigger raised unhandled exception ORA-04063
despite that the solution in the doc id above talks only about ENGFDECN but it applies to all other packages. I've faced the same issue and now I have ZERO invalid packages, it will take sometime but it's worth a while.
Regards,
Mohammed B. Tammous

Cannot insert object error using Power View in Excel 2013

I created a short table in Excel 2013, positioned the cursor in the table and clicked Inset/Power View Report. I get a status window saying Excel is opening a Power View sheet but then I get a Power View error: Cannot Insert Object. I am able to insert new
tabs in the workbook. When I try the insert again, I just get the Power View error. I looked at other threads with similar issues and did the following:
Made the Formula bar visible - no change
Tried to repair Office 2013 but that option is not available when I right click on the program in the Control Panel
De-installed Silverlight - Tried to insert Power View Report. A Power View tab was created with the Power View picture and Power View ribbon. Got the message to install Silverlight and Reload. Installed Silverlight hit Reload and the Power View tab didn't
change. Hit Power View Report and got the Cannot Insert Object error message again.
Any help is appreciated.

Hi,
Did you use PowerView first time? I notice you had found a similar thread and tested the solutions.
PowerView is an add-in in Excel2013, We must make sure that you check some option in the trust center and Add-in center.
http://blogs.office.com/b/microsoft-excel/archive/2012/10/04/intro-to-power-view-for-excel-2013.aspx
Location1: Excel Options>Add-in>Solver Add-in enable
Location2: Excel Options> Trust Center> Add-in
Then you said that you couldn’t repair the Excel 2013, please refer to the following link:
http://office.microsoft.com/en-gb/outlook-help/repair-office-programs-HA010357402.aspx
At last, we may test it in clean boot, please refer to the following link:
http://support.microsoft.com/kb/929135
Regards,
George Zhao
TechNet Community Support

DG Observer triggering SIGSEGV Address not mapped to object errors in alert log

Hi,
I've got a Data Guard configuration using two 11.2.0.3 single instance databases. The configuration has been configured for automatic failover and I have an observer running on a separate box.
This fast-start failover configuration has been in place for about a month and in the last week, numerous SEGSEGV (address not mapped to object) errors are reported in the alert log. This is happening quite frequently (every 4/5 minutes or so).
The corresponding trace files show the process triggering the error coming from the observer.
Has anyone experienced this problem? I'm at my wits end trying to figure out how to fix the configuration to eliminate this error.
I must also note that even though this error is occurring a lot, it doesn't seem to be affecting any of the database functionality.
Help?
Thanks in advance.
Beth

Hi..   The following is the alert log message, the traced file generated, and the current values of the data guard configuration. In addition, as part of my research, I attempted to apply patch 12615660 which did not take care of the issue. I also set the inbound_connection_timeout parameter to 0 and that didn't help either. I'm still researching but any pointer in the right direction is very much appreciated.
Error in Alert Log
Thu Apr 09 10:28:59 2015
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc (incident=69298):
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Thu Apr 09 10:29:02 2015
Sweep [inc][69298]: completed
Trace file:
Trace file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning and Oracle Label Security options
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1
System name:    Linux
Node name:      <host name>
Release:        2.6.32-431.17.1.el6.x86_64
Version:        #1 SMP Wed May 7 14:14:17 CDT 2014
Machine:        x86_64
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 29902, image: oracle@<host name>
*** 2015-04-09 10:28:59.966
*** SESSION ID:(416.127) 2015-04-09 10:28:59.966
*** CLIENT ID:() 2015-04-09 10:28:59.966
*** SERVICE NAME:(<db_unq_name>) 2015-04-09 10:28:59.966
*** MODULE NAME:(dgmgrl@<observer host> (TNS V1-V3)) 2015-04-09 10:28:59.966
*** ACTION NAME:() 2015-04-09 10:28:59.966
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
DDE: Problem Key 'ORA 7445 [nstimexp()+71]' was flood controlled (0x6) (incident: 69298)
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
ssexhd: crashing the process...
Shadow_Core_Dump = PARTIAL
ksdbgcra: writing core file to directory '/u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/cdump'
Data Guard Configuration
DGMGRL> show configuration verbose;
Configuration - dg_config
Protection Mode: MaxPerformance
Databases:
    dbprim - Primary database
    dbstby - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
    FastStartFailoverThreshold      = '30'
    OperationTimeout                = '30'
    FastStartFailoverLagLimit       = '180'
    CommunicationTimeout            = '180'
    FastStartFailoverAutoReinstate = 'TRUE'
    FastStartFailoverPmyShutdown    = 'TRUE'
    BystandersFollowRoleChange      = 'ALL'
Fast-Start Failover: ENABLED
Threshold:        30 seconds
Target:           dbstby
Observer:         observer_host
Lag Limit:        180 seconds
Shutdown Primary: TRUE
Auto-reinstate:   TRUE
Configuration Status:
SUCCESS
DGMGRL> show database verbose dbprim
Database - dbprim
Role:            PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
    DG_CONFIG
Properties:
    DGConnectIdentifier             = 'dbprim'
    ObserverConnectIdentifier       = ''
    LogXptMode                      = 'ASYNC'
    DelayMins                       = '0'
    Binding                         = 'optional'
    MaxFailure                      = '0'
    MaxConnections                  = '1'
    ReopenSecs                      = '300'
    NetTimeout                      = '30'
    RedoCompression                 = 'DISABLE'
    LogShipping                     = 'ON'
    PreferredApplyInstance          = ''
    ApplyInstanceTimeout            = '0'
    ApplyParallel                   = 'AUTO'
    StandbyFileManagement           = 'MANUAL'
    ArchiveLagTarget                = '0'
    LogArchiveMaxProcesses          = '4'
    LogArchiveMinSucceedDest        = '1'
    DbFileNameConvert               = ''
    LogFileNameConvert              = ''
    FastStartFailoverTarget         = 'dbstby'
    InconsistentProperties          = '(monitor)'
    InconsistentLogXptProps         = '(monitor)'
    SendQEntries                    = '(monitor)'
    LogXptStatus                    = '(monitor)'
    RecvQEntries                    = '(monitor)'
    SidName                         = ‘<sid>’
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '0'
    LogArchiveFormat                = '%t_%s_%r.dbf'
    TopWaitEvents                   = '(monitor)'
Database Status:
SUCCESS
DGMGRL> show database verbose dbstby
Database - dbstby
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   0 seconds
Apply Lag:       0 seconds
Real Time Query: ON
Instance(s):
    DG_CONFIG
Properties:
    DGConnectIdentifier             = 'dbstby'
    ObserverConnectIdentifier       = ''
    LogXptMode                      = 'ASYNC'
    DelayMins                       = '0'
    Binding                         = 'optional'
    MaxFailure                      = '0'
    MaxConnections                  = '1'
    ReopenSecs                      = '300'
    NetTimeout                      = '30'
    RedoCompression                 = 'DISABLE'
    LogShipping                     = 'ON'
    PreferredApplyInstance          = ''
    ApplyInstanceTimeout            = '0'
    ApplyParallel                   = 'AUTO'
    StandbyFileManagement           = 'AUTO'
    ArchiveLagTarget                = '0'
    LogArchiveMaxProcesses          = '4'
    LogArchiveMinSucceedDest        = '1'
    DbFileNameConvert               = ''
    LogFileNameConvert              = ''
    FastStartFailoverTarget         = 'dbprim'
    InconsistentProperties          = '(monitor)'
    InconsistentLogXptProps         = '(monitor)'
    SendQEntries                    = '(monitor)'
    LogXptStatus                    = '(monitor)'
    RecvQEntries                    = '(monitor)'
    SidName                         = ‘<sid>’
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '0'
    LogArchiveFormat                = '%t_%s_%r.dbf'
    TopWaitEvents                   = '(monitor)'
Database Status:
SUCCESS

Expected a dict object error message

When attempting to open a PDF file in Reader sometimes get the "Expected a dict object" error message.

Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me.

How do I fix an "Insane Object" Error ?

I am receiving an "Insane Object" error when I load one partuclar VI. Is there any way to "copy" the diagram to a new file to fix the corrupted Object ? I am using Win N/T 4.0 and LabView 6i. The module was originally designed using LabView 5.X and the Module appears to work OK after accepting the Error Messages.

I think the most complete discussion of this situation can be found in the NI KnowledgeBase. Just go to the main ni.com site, search for "insane object" and follow the first hit.
That KnowledgeBase entry was created with a lot of input from some of the LabVIEW developers, so it's a pretty good guide.
Regards,
John Lum
National Instruments

Amfphp - flex remote object error event handler

I'm using amfphp and I want it to return an error that the flex remote object error event handler will pick up. At the moment I can get only the result handler to do anything in flex.

Hi,
Try throwing an exception in the remote method. For example,
function inverse($x) {
    if (!$x) {
        throw new Exception('Division by zero.');
    else return 1/$x;

Tcode in S_TCODE Object Error

Similar Messages

Maybe you are looking for