Tcode in user decision step
Dear experts,
I have a user decision step. Before the approver can approve or reject the workitem i need to show a tocde screen to him. Say for example CN25. My workitem will be generated only after initiator makes changes in that tcode. I want approver who gets the workitem to see CN25 tcode screen and then only make decision. Is there any possibility to attach or bring a tcode screen in user decision step.
Dear Hemalatha,
Thanks a lot for your reply.
You can direct;y use the Object which is used to trigger the workflow. Then you can bind this object to get that tcode as
attachment in decision task.
This is exactly my requirement. In my BO i have a standard method "display" to display the Tcode. I want to know how should i do the binding from BO's method to user decision task so that i can display a link as attachment of user decision step, by clicking which user can see the display screen.
Similar Messages
-
Hi,
I have a 3 user decision steps in my Customised workflow which uses the task TS00008267. Each task has different decison text and outcome. When this is executed through UWl the outcome does not appear as they are in SBWP.
Does this need and Portal Configuration?
Thanks & RegardsHi,
There are two thing you need to do.
First, you need to configure the SWFVISU.
Run Tcode SWFVISU.
here, select "Task Visualization' and maintain your standard task ( TS ) with ABAP web dynpro option.
Now selct your entry and click on Visualization Parameters as mentopn below.
APPLICATION ( WD application name )
DYNPARAM
NAMESPACE
SYSTEM_ALIAS
Second, ask Portal team to chagne the XML code for the above standard task and application ( i.e. WD appilcation which will be launced on clicking the task ).
From the next run of the workflow, WD applcitoon will be lauched from the protal.
for the old workitem this will not work.
Note : If u do not configure SWFVISU then WD application will not lauch but user will get SAP gui screen for processing it.
xlm code must be changed corresponding task for both case.
Thanks and ragards,
SNJY -
Can we display custom error message in user decision step screen.
Hi,
My requirement is to display error message when approver selects reject button in user decision step.
based on some condition i need to display error message in user decision screen when approver tries to
reject .
Please help
Thanks,
PhaniHi ibrahim,
Thanks for your Replay.
steps
1. cretae global class with interface IF_SWF_IFS_WORKITEM_EXIT.
2. cretae Event with importing parameter.
where i need to call EVENT_RAISED method ,do inned to call that method in
IF_SWF_IFS_WORKITEM_EXIT ?
how SWRCO_EVENT_AFTER_EXECUTION value is passed to method EVENT_RAISED ?
Thanks,
phani -
Container variables in User decision Step in BPM
Hello,
I am using User decision Step in BPM.
When i use only text in "Title for Display" the BPM is activated successfully and Status in SXI_CACHE also shows 0.
If I use container variables in "Title for Display" the BPM is activated successfully but status in SXI_CACHE shows 99.
It shows the below error
"Problem updating an integration process with object ID 073AF2C620F43E839B2903344DEE29BB. Symbol 'CE/KO' expected at position 1 in expression ''
Please suggest.
Thanks,
ShabariHi Shabari, did you follow the steps for declaration of variables as in [SAP help for user decisions|http://help.sap.com/saphelp_nwpi71/helpdata/en/42/c2a19fb4511d65e10000000a1553f6/content.htm]? How did you define your variable?
Maybe discussion [in this thread|BPM activation Error in SXI_cache; can help, it is unanswered though.
Regards, Martin -
Link in User Decision step not showing correctly in UWL
Hi SAP Experts,
I have a requirement to add a link in a user decision step, this link triggers a custom webdynpro for additional input. When I access the workitem from Business Workplace, the link is showing fine. But when I execute the workitem in UWL, the link is not displayed, instead the code is shown (<a>...</a>). Please advise on what I should do to have the link working. Thanks in advance.Hi,
This same thing was just recently discussed. I just cannot find the thread anymore (well, in that thread there was not really any solution). Basically the hyperlinks in work item do not seem to work in UWL as they should. I don't know if there are any way to make them work. My suggestion is to not use the hyperlink at all and replace that with an action (=button) to the task in the UWL. This can be achieve quite easily by simple XML configuration in portal. If you have worked with UWL this should be quite straightforward for you, or if there is a consultant at the site, who is familiar with UWL, this should be simple for him/her.
Regards,
Karri -
SOFM in user decision step - provide reason in UWL
Hello Everyone,
I'm working with a customer who wants to use a user decision step and add a reason for the rejection only. This step will be executed in UWL - since UWL doesn't support syncrhonous dialog chains, it can't be implemented by adding another step with SOFM. I have seen the 'template with attachment' in the user decision step, and have tried binding SOFM to the Reference in the container, but the user doesn't have the option.
Perhaps this could be implemented with a secondard amodal method - which checks the user decision code and only implements if the decision was rejected. I'd like to be able to put a condition on the secondary methods.
If you've done something like this, please let me know!
Regards
GingerHi Ginger,
Unfortunately it is not only synchronous dialog chains, but also secondary methods that are not supported in the UWL, so you're stuck both ways.
Though, I have been told that the latest SP does support some kind of advance with dialog functionality (SP15 I think?).
At one customer we used a custom ABAP-based decision step which executed in a wingui session - thus synchronous dialog chains worked as long as every subsequent step was wingui based (which SOFM.CREATE obviously is) - worked quite well.
Let me know if you need more info.
Cheers,
Mike -
Looping a single branch in User Decision Step
Hi All,
Can anyone tell me is looping possible for a single branch in user decision step in a workflow?
If yes, How?
I want like to loop the step cancel and keep workitem inbox.
Whenever the user clicks cancel and keep workitem in inbox in a user decision and again executes the WI i would like the workflow to start execution from the step just above the user decision step, i.e; Display PR.
This is my requirement. Tell me how can i implement it?
Thanks,
RajHi,
instead of doing so, you could try to enter that method as "secondary method" or "before method" within the tab-strip "Methods".
If you used your own coding for a decision, you could enable the exception 8015 of the method's result, which is the cancel-button. If you did so, you can enable that outcome in the workflow-activity's definition.
Best wishes,
Florin -
User Decision Step in BPM - PI 7.1
Hi All,
I have posted a wiki for User Decision step in BPM in PI 7.1, Please go through it and post your queries, suggestions and comments here.
The link for same is under:
Part1 - https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/userDecisionstepinSAPPI7.1-Part+I
Part2 - https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/userDecisionstepinSAPPI7.1-Part+II
Regards,
SachinHi Sachin,
Nice job,
During my practice on this scenario. I have got an error please kindly guide me on this, may this error also clear for the others
*I got an error on SXI_MONITOR as:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The trace of the error as:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 72485F6BFC78416A29EEE3EE10D09BCE</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
Please kindly guide me on this, Is the message has to validate at sender agreement? if not where is the error I am doing? -
User Decision step- Upon reject, auto-popup text for reason
In a user decision step, when the user clicks the reject button, open text for rejection reason within the workitem.
i have done the following
1) Create a new step
2) Create a task based on SOFM.CREATE
3) Binded WIOBJECT_ID => (append table) ADHOCOBJECTS
It works fine, when the user clicks the reject button a new work item with the reason for rejection lands in the user inbox, which when clicked brings up the doc.
I want to make it seamless for the user where as soon as the reject button is clicked, the document <b>should open right away</b> without a new work item in the inbox
Any help will be greatly appreciatedHi
If you are using the portal/UWL then search the blogs for a solution otherwise give this a try, in your step definition for the 2 steps, go to the Details tab and tick 'Advance with dialog', this will work if you execute from the business workplace.
Good Luck!
Ravi -
Need 2 Multiline elements for user decision step
We are on SAP R/3 Enterprise version.
I have this requirement to find agents based on the agent type and work center field. So I created a responsibility rule for each type of agent type. The responsibility rule is keyed on the work center, and HR positions are mapped to each responsibility rules work center field.
We have 50 agent types/responsibility rules, 60 work centers, and 1 or more positions for each agent type and work center combinations. Due to the total number of positions, I prefer to use 1 responsibility rule per agent type for ease of maintenance.
I have a FM that reads the responsibility rule based on the agent type and work center field and retrieve the agent_list. I used this FM/method/step prior to my user decision step and pass the agent_list to the UD step via container.
In my user decision step, the Other tab does not have Multiline element for me to enter my agent_list. So I cannot use &agent_list[&_WF_PARFOREACH_INDEX&]& in my user decision agent assignment expression field.
In my last job, we have SAP ECC 5.0, the UD step has a Misc tab that has Multiline element, but our current SAP R/3 Enterprise version does not have Misc tab, it only has Other tab.
Question:
1. How do I use [&_WF_PARFOREACH_INDEX&] without Multiline element for agent_list in UD step?
2. I have to use the same way to retrieve my LED_agent_list as well, so I need 2 Multiline elements in my UD step. But normally in Other tab, it allows you to define only 1 Multiline element. How do I get around this restriction?
3. My last resort is to use 1 responsibility rule, then I can use the rule in the agent assignment. If that is the case, is there any limit on the number of entries in the rule?
Thanks.
AmySorry, I posted to the wrong forum.
-
Need Help on User decision step in BPM
Hi All,
I have a requirement to design the user to to system interaction in a partiular scenario. I am trying to use the User decision step in BPM available in PI 7.1 server. I have used the User decision step and filled all the parametes as given in the sap documentation. When I am trying to execute the scenario, The outbound process is succesful but stops at the BPM workflow at the User decision step with the message (No Agent ready) .
Can anybody help me in solving this issue.
Thanks in advance,
KalpanaHi Shabarish and Swarup,
I have defined the relevant user in the Integration directory , also made sure that the user entered is defined on the integration server and there are not restrictions on the defined user. The workflow log is as follows:
Workflow File2File_BPM1
Workflow instance File2File_BPM1 http://File2File_BPMdemo
Instance number 000000001046
Start date 30.12.2008 Started by WF-BATCH
Start time 11:33:36 Current status In Process
View: Workflow chronicle
Error St Task Result Date Time Processing time
Error Agent Executed Action Date Time Object Object Name Object 2 Object name 2 User Context
File2File_BPM1 http://File2File_BPMdemo Workflow started 30.12.2008 11:33:36 -1s
WF-BATCH Start message received 30.12.2008 11:33:36 MIAB_BPM_OB2 / http: C532A7AB4D284B9011C0B0C7F8AFB WF-BATCH
WF-BATCH Workflow started 30.12.2008 11:33:36 WF-BATCH
WF-BATCH Events Dispatcher Active 30.12.2008 11:45:36 MIAB_BPM_OB2 / http: 597B946347C148AD03988B5D8BE2C WF-BATCH
WF-BATCH Events Dispatcher Active 30.12.2008 11:45:37 MIAB_BPM_OB1 / http: 6E0E09EE977E4F333D02DDDAE9A52 WF-BATCH
WF-BATCH Events Dispatcher Active 30.12.2008 13:48:07 MIAB_BPM_OB2 / http: 9F5491FD9BC642E50486A6FED89DA WF-BATCH
WF-BATCH Events Dispatcher Active 30.12.2008 13:48:07 MIAB_BPM_OB1 / http: 1AE5BB06D72341AD01F8C45E6AA7E WF-BATCH
WF-BATCH Events Dispatcher Active 02.01.2009 05:34:58 MIAB_BPM_OB2 / http: CD698CDE5606436811BAB330011AF WF-BATCH
WF-BATCH Events Dispatcher Active 02.01.2009 05:34:59 MIAB_BPM_OB1 / http: 2D82C00C16E0447F1DF3B133470AD WF-BATCH
'Good'{TYPE=SWFXST_STRING}'BAD'{TYPE=SWFXST 30.12.2008 11:33:37 0s 1046
WF-BATCH Dialog work item created 30.12.2008 11:33:37 WF-BATCH
WF-BATCH EVALUATE_AGENT_VIA_EXPESSION 30.12.2008 11:33:37 WF-BATCH
I hope this can help you in identifying the error.
Thank you,
Kalpana -
Hi,
I have requirement.PI is reading data from source and after transformation sending one mail to approver .If Approver approves it then messgae will be sent to target system.For approval and rejection ,I am using user decision step in BPM.
My question is if approver approves reqest in 15 days ,then what will happen in SXMB_MONI,Will the message got failed?PI should not be used for such scenarios.
The User Decision step in BPM is merely thought for PI admins, if a message should retried or skipped. Not for end-users.
Create a Wokflow in ECC or similar. -
Error Handling in workitem---user decision step
HI Experts,
I have created work item through user decision step. In that decision i have given Approve & Reject Option
now when user click on Approve that i need to do some validation based on this i need to give error also at same time i dont want to complete that workflow...i want that after getting error user must recity that error and than come back again to inbox and execute that workitem... I tried it but i am not able to do this...can anybody pls provide the hint for this requirement.
Thanks & Regards,
TaranHi Pavan,
I am confused i your third point.
. In the Approved branch of the Decision step check for the condition , if it fails then raise the exception.that you have define in the Point 1. in the exception branch insert the logic so that the condition becomes true, after that step insert one more decision step.
how i 'll raise the raise the exception do i need to create and task or any other step.
also can you please explain below point in detail.
in the exception branch insert the logic so that the condition becomes true, after that step insert one more decision step.
also i am working into SAP CRM 2007 web UI environment.
Please advice.
Thanks,
Taran -
Attachment in WORKFLOW user decision step
Hi all,
My requirement is to display a link in user decision step.
When link is clicked, control should navigate to MM02 transaction.
Also in following user decision step i need to provide link for smart form in user decision.
Can anybody please guide in detail .
Thanks.
Edited by: Sanjay_lnt on Sep 26, 2010 1:14 PM
Edited by: Sanjay_lnt on Sep 26, 2010 1:15 PMClosed.
-
"You can also" link in UWL work item when using user decision step in workflow
Hi,
Just want to check if anybody has tried adding links to this section in the UWL when using user decision step? I need to pass some custom links which will be calling some webdynpro applications and backend transactions. I have read somewhere that Ineed to modify the XML file but don' t know how the next steps once I have defined (i.e. how to handle those links).
Thanks in advance.
RammelHi Rammel
I hope you are keeping well and many thanks for using the SAP Discussion Forums .
Based upon your scenario you mentioned that:
You want to add links to the "You Can Also" section in the UWL with user decision steps
In an effort to pass custom links (calling web dynpro) applications.
You wish to know how to modify the XML
Ok now based upon the scenario there are two key points regarding XML files and efforts to change them.
Remember that XML in terms of the UWL follow the notion of precedence. Now that means that once you make a change to an XML file you need to re-upload it to realize changes. To re-upload an XML file and realized changes you need to do so with a "High" or "Very High" priority and also ensure that the UWL Cache has been cleared of the UWL Service restarted so changes can be realized.
The second key point is to ensure that you backup all current XML files before making any changes so you can easily revert those changes if required.
Now reverting back to your query, the XML files and the "You Can Also" section. Kindly see the documentation outlined below as here you are going to make changes to the I-View configuration:
Configuring the UWL
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45?overridelayout=t…
UWL Content Configuration
UWL Content Configuration - Configuring the Universal Worklist - SAP Library
Kindly update me as per your findings.
Kind Regards & All The Best
Troy - Enterprise Portal Support Engineer
Maybe you are looking for
-
Line items are not showing in fbl3n,fs10n,faglb03,fagll03
hi experts, i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account.
-
Problem while activating the DSO
Hi- I have some invalid characters in the reference document number which is causing not to activate the DSO. I found the document numbers which is causing the problem. They are not more than 2, so I thought to put a filter in the DTP. It is not allo
-
Hi robman, Welcome to Sony Community! Thank you for this message. The model# VGN-FZ140E only supports Windows XP and Vista. We dont have driver updates available for other operating system as of yet. Jen If my post answers your question, please mar
-
Oracle Services for MicTraSrv 9i - recovery port?
When you install OS for MTS with Oracle 9i client it prompts you for a port that the recovery service listens on - how would I know/find out what number I should put there? Thanks Joe
-
OS X 10.5 Leopard preview crashes with LR pics
I just found out that some pics can cause the preview application in Leopard to crash! It is not clear in the moment whether to blame Apple or Adobe because the error only occurs with pics touched in LR1.2 but the same pics work well with other appli