Tcode in which EXIT_SAPLQUOT_001 and EXIT_SAPLQUOT_002 will be triggered

Hi,
please let me know in which transaction will the user exits EXIT_SAPLQUOT_001 and EXIT_SAPLQUOT_002 will be triggered and also the procedure to be followed in that transaction.
Regards
Nikhil

Hi simha,
Please check out the transaction PT50.
Reward points if this is helpful.
Regards,
Kiran

Similar Messages

Re: Which programs and services will be installed

I have installed Windows 7 Home 32 on a Toshiba Satellite A210 (no upgrade - new installation) and I have later installed all Toshiba drivers from their website. I want to know which programs and services are installed from this three programs:
- Hardware Setup
- Utilities
- Value Added Package
I have installed all three programs but I can only find this programs:
- TOSHIBA Flash Cards
- TOSHIBA PC Diagnostic
In the settings of "Flash Cards" I can only disable the hotkey function which is not disabled.
But the keys F1 to F12 still don't work and I don't find the Toshiba hardware settings in the control panel.
So I want to check all programs and services from this three programs on the notebook.
John

This is a little bit complicated.
I presume you can remember how it works under Vista and I hope you can remember that on your desktop there was placed shortcut for Toshiba Assist. When you open Toshiba Assist you can find Hardware setup and all other Toshiba tools and utilities.
So you can install Assist designed for your notebook model and for Vista. I have installed it too.
Value Added Package contains several tools and utilities:
- Toshiba Components Common Driver
- Toshiba Utilities
- Toshiba PC Diagnostic Tool
- Toshiba Power Saver
- Toshiba Button Support
- Toshiba Zooming Utility
- Toshiba Flash cards
Install Assist and you will have access to all important tools and utilities.

I have an old version of itunes (not sure which one)and if I download the new version 11.1.4, will I be able to keep my original library with playlists from old version of itunes?

I have an old verison of itunes(not sure which one) and if I download the new version 11.1.4, will I retain my original library and playlists from the old version or loose it?

you can just make a backup and download the new verion

What's Happening?? Some days after installing latest security up date for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes.No other CD or DVD disk will mount.

What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?

Hello Robert,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Help! I have downloaded Firefox 4 on my Mac which is running OS 10.4.11 and it will not open. It has displaced my previous Firefox 3 . How can I recover previous Firefox (and all my tabs)?

I have downloaded Firefox 4 on my Mac which is running OS 10.4.11 and it will not open. It has displaced my previous Firefox 3. How can I recover my previous Firefox (and all my tabs?)

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version whichi understand is unsafe...what to do?

# Question
I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?

That was probably caused by your Firewall blocking the newly installed version of Firefox.
No known security issues with Firefox 3.6.17, which was just released this past week.

How to find out which IPHONE 4 and 4S will work in Armenia?

how to find out which IPHONE 4 and 4S will work in Armenia?

Hi Chitwanjit,
STAD and ST03 are your friends.
- Get in contact with your SAP Basis in order to get an explanation how
to use this tools (if necessary).
- SAP courses ADM315, BC490 explain these tools
- search in help.sap.com,
SDN, google, there should be plenty of information available as well.
Kind regards,
Hermann

I can not upgrade the iOS on my phone, nor sync the phone because the process starts with backing up the phone which always hangs up at the backing up stage and then will not allow further progress.

I can not upgrade the iOS on my phone, nor sync the phone because the process starts with backing up the phone which always hangs up at the backing up stage and then will not allow further progress.
And for this I guess that it is the backing up of my Podcasts - which are free downloads that causes the hang up. These are items that I have played and synced before without issues. I am thinking this way because these are Podcasts that I used to play but sundenly would not play on my iPhone. Each time I try to play anyone of them it generates the message - this movie could not be played.
I am scared of atempting a system restore because I guess I may lose my SMS for the past two months. Please approach the solution from this point of view.
Thanks
Joe

Please refer to this thread.
https://discussions.apple.com/thread/3417041
It may have something to do with one of your backup files that has been corrupted before.

Which models of iphone 5c and 6 will work with lte in both Israel and russia

I'D like to know which models iphones 5c and 6 will work correctly in both countries Russia and Israel?

JP Ellery wrote:
The models that will work with brazilian LTE networks are:
A1507 and A1529 (iPhone 5c)
A1457 and A1530 (iPhone 5s)
JP
Have you personally tried those models with Brazilian LTE networks? Do they work? If so, fine. If not, then besides that, there is the problem of the warranty which is not international. The user will have to return the phone back to the country of purchase for both warranty and out of warranty service. So what might seem cheaper at first glance might not be in the end.
Anyways, it your money and the OP's should he want to go ahead with your recommendation.

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen

Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen

I really can't tell from your post but did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

Which of the NEW iphones is better for travel? which phone (and/or plan) will let me put in a foreign sim card?

which of the NEW iphones (5s or 5c) is better for travel from U.S. to europe/asia? which phone (and/or plan) will let me put in a foreign sim card?

http://support.apple.com/kb/ht1937
Accoprding to Apple's information, all UK phones are sold as locked to the carrier you got it from, so yours is ALREADY locked to T-Mobile (activation has nothing to do with whether a phone is sold as locked or not).
However, it looks like, from Apple's listing, that they also support unlocking, but you will need to contact them about doing that. There may be restrictions, like so many months under contract first, or a fee, or whatever rules they apply to unlocking. Or there may be none and you just need to ask them to do it.
Regardless, you need to contact T-Mobile and ask them about how to get an unlock request processed by them. And do it before you leave - much more difficult to deal with once you are far removed from their network.

If I disconnect and connect the session which was currently working will not be avialable but a new session starts.

Hi
RDP connection over server 2008 R2 standard, if I disconnect and connect the session, which was currently working will not be avialable but a new session starts.
what features should I add and how to configure so that if connection is lost the user should see the same session when they connect back.
kind Regards,
Jayanth

Hi,
Please enable this policy and try again.
Restrict Users to a Single Session
http://technet.microsoft.com/en-us/library/cc754762.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Tcode in which EXIT_SAPLQUOT_001 and EXIT_SAPLQUOT_002 will be triggered

Similar Messages

Maybe you are looking for