Tcode MASS does not work if more than one item in contract

Hi,
I need to update the contract zone of a PO. Via tcode ME22N, this zone is disabled, so i cannot fill my contract in the PO using this tcode.
I tried tcode MASS which works only if the contract has only one item.
Can anyone help please?
Thanks in advance

HI Anu,
Good to KNow that you are able to do it by Mass
In Mass for Multiple Line Item to update to Multiple line item PO
Just go to MASS
Select the option BUS2012 (Purchase orders)
and in the select the poline item EKPO
And enter the PO Number along with the Item Number in the entry screen and execute it .
But for the Contract also enter the option
Outline Agreement -- for the contract number
Principal Agmt Item-- for the contract item number
Enter the above against the PO and its item number combination it works.
As suggested earlier please check the Screen layout option also.which would be more easy way,
Check the PO Screen layout-Field settings. at the Document type level  mainatained in the config.
against the
Hope so this would help.
Regards
Anjanna

Similar Messages

  • E3200 - USB port does NOT work for more than one device

    We needed a new router that had the dual band connectivity as our previous router stopped working properly when we started using a baby monitor operating on the same 2.4 GHz. The choice was between E3200 and E2500. We chose the E3200 mainly because it also offered a USB port. We were hoping to use that to connect our printer and two external drives (thus bypassing our old desktop that's been working as a server). However, it turns out that the USB port on E3200 does NOT support USB hubs! So, you can ONLY use ONE device - either a printer or one external storage drive. That wasn't really clear at all from the description. I feel like we wasted the extra $50 hoping to get functionality that just isn't there. Can't believe that in this day and age, Cisco thinks we all have only ONE USB device we might want to connect to the network! The router itself is fast enough, but the extra $50 for a USB port that doesn't do much and some speedboost phantom ability is just not worth it. 

    Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
    I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
    Hope this help
    Massimo
    (Mod note: Edited for guideline compliance.)

  • Networked L7680 does not work from more than one computer at a time.

    Have installed latest driver software on both computers. Printer will only work with one computer on at a time. When I run windows device trouble shooter from the last computer turned on it says printer is off. It works ok from the first computer turned on.
    Any help is appreciated.

    Networked how??  Please explain how everything is connected and model number of equipment.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Apex 4.0 tree does not work with more than 2 levels.

    When I have more than 2 levels in my tree, I only see the root node. The query works fine and returns 132 rows when I run it in SQL. It is just the tree that does not work.
    The same tree when built in 3.2 works fine.
    This is my tree query:
    select case when connect_by_isleaf = 1 then 0
    when level = 1 then 1
    else -1
    end as status,
    level,
    "NAME" as title,
    null as icon,
    "ID" as value,
    null as tooltip,
    null as link
    from (
    SELECT '__TOP_NODE__' id
    , NULL pid
    , 'BI Applications' name
    , '' link_id
    , null a1
         , null a2
    FROM dual
    1 b) BIA Modules
    UNION ALL
    SELECT '__MD_'||module_key id
    , '__TOP_NODE__' pid
    , module_name name
    , module_key link_id
    , '__MD__' a1
         , null a2
    FROM c_bia_module
    Level = 2
    Parent = Module
    Node = Functional Areas
    ID = '__FA_' prefixing functional area code
    UNION ALL
    SELECT '__FA_'||funcarea_key id
    , '__MD_'||module_key pid
    , funcarea_name name
    , funcarea_key link_id
    , '__FA__' a1
         , null a2
    FROM c_functional_area
    Level = 3
    Parent = Functional Area
    Node = Fact Group
    ID = '__FG_' prefixing fact group key
    UNION ALL
    SELECT '__FG_'||factgroup_key id
    , '__FA_'||funcarea_key pid
    , factgroup_name name
    , factgroup_key link_id
    , '__FG__' a1
         , null a2
    FROM c_fact_group
    start with "PID" is null
    connect by prior "ID" = "PID"
    order siblings by "NAME"
    If I reduce the query to just use two levels like:
    SELECT '__TOP_NODE__' id
    , NULL pid
    , 'BI Applications' name
    , '' link_id
    , null a1
         , null a2
    FROM dual
    1 b) BIA Modules
    UNION ALL
    SELECT '__MD_'||module_key id
    , '__TOP_NODE__' pid
    , module_name name
    , module_key link_id
    , '__MD__' a1
         , null a2
    FROM c_bia_module
    It works fine. Can somebody let me know what I am doing wrong? Is there a way to set the number of levels supported in 4.0?

    Hi Vidya,
    Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
    Regards,
    Hilary

  • CustomDatumExample.java does not work for more than 2 attributes

    The CustomDatumExample.java only works
    if the Employee object has 2 attributes -
    (EmpName and EmpNo). If I try to add
    another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
    Anyone know why?
    Employee object
    CREATE TYPE employee AS OBJECT
    empname VARCHAR2(50),
    empno INTEGER,
    attr3 VARCHAR2(50)
    Custom object class
    public class Employee implements CustomDatum, CustomDatumFactory
    public static final String SQLNAME = "EMPLOYEE";
    public static final int SQLTYPECODE = OracleTypes.STRUCT;
    MutableStruct _struct;
    static int[] _sqlType =
    12, 4
    static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
    static final Employee _EmployeeFactory = new Employee();
    public static CustomDatumFactory getFactory()
    return _EmployeeFactory;
    /* constructor */
    public Employee()
    struct = new MutableStruct(new Object[3], sqlType, _factory);
    /* CustomDatum interface */
    public Datum toDatum(OracleConnection c) throws SQLException
    return struct.toDatum(c, SQL_NAME);
    /* CustomDatumFactory interface */
    public CustomDatum create(Datum d, int sqlType) throws SQLException
    if (d == null) return null;
    Employee o = new Employee();
    o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
    return o;
    /* accessor methods */
    public String getEmpname() throws SQLException
    { return (String) _struct.getAttribute(0); }
    public void setEmpname(String empname) throws SQLException
    { _struct.setAttribute(0, empname); }
    public Integer getEmpno() throws SQLException
    { return (Integer) _struct.getAttribute(1); }
    public void setEmpno(Integer empno) throws SQLException
    { _struct.setAttribute(1, empno); }
    public String getAttr3() throws SQLException
    { return (String) _struct.getAttribute(2); }
    public void setAttr3(String attr3) throws SQLException
    { _struct.setAttribute(2, attr3); }
    null

    Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
    I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
    Hope this help
    Massimo
    (Mod note: Edited for guideline compliance.)

  • Server does not support setting more than 5 shared access policy identifiers on a single container

    Hi,
    I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
    that code against the same Asset. Then you receive this error:
    "Server does not support setting more than 5 shared access policy identifiers on a single container."
    So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
    Is this the Lmitation of media service? or am I missing something?
    Following is the code I used for this:
    if (AssetId != "")
                    inputAsset = (from a in _context.Assets
                                  where a.Id == AssetId
                                  select a).FirstOrDefault();
                    policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                    var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                    var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                    assetFile.Upload(singleFilePath);
                    locator.Delete();
                    MediaElement media = new MediaElement();
                    media.AssetId = inputAsset.Id;
                    media.Title = Path.GetFileName(singleFilePath);
                    var result = Save(media, singleFilePath);
                    return inputAsset;
                else
                    inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                     policy = _context.AccessPolicies.Create(
                                        inputAsset.Name,
                                        TimeSpan.FromDays(30),
                                        AccessPermissions.Write | AccessPermissions.List
    | AccessPermissions.Read | AccessPermissions.Delete);
                     var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                     var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                     assetFile.Upload(singleFilePath);
                     locator.Delete();
                     policy.Delete();
                     MediaElement media = new MediaElement();
                     media.AssetId = inputAsset.Id;
                     media.Title = Path.GetFileName(singleFilePath);
                     var result = Save(media, singleFilePath);
                     return inputAsset;

    Hi,
    I found some information related to
    Stored Access Policy , Shared Access Signatures   please check if it helps.
    Regards,
    Shirisha Paderu.

  • My Home Sharing does not work any more after latest iTunes update

    After iTunes update to 11.1.3 my Home Sharing does not work any more!
    It worked just fine for several years...
    I tryed to do everything I could find on Apple support... NOTHING works.
    Most of Apple so called updates turn out real crap...
    I am wondering whats happening to Apple?...

    Hello igor_rena,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Best of luck,
    Mario

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • HT4623 I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....

    I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....Any advice appreciated.

    give us more to work with in terms of info then "basically does not work any more"
    it can be from it's on fire to the a key on the onscreen keyboard don't respond

  • One speaker of my i phone 4s does not working any more and my phone still new ?

    One speaker of my i phone 4s does not working any more ? and it s still new !

    There is only one speaker, other side is microphone. You
    may wish to download and become familiar with the user guide.
    It is a link in Safari on your iPhone, you can download the user
    manual after you download iBooks app, or you can find it here:
    http://support.apple.com/manuals/#iphone

  • Since IOS7,The synchronization itunes does not work any more

    since IOS7, the synchronization itunes does not work any more....

    Hi martinafromlimassol,
    Welcome to the Apple Support Communities!
    I understand that you iPhone has been dropped and the display no longer functions. In this situation, it may be necessary to have your iPhone 5 evaluated for repair. Please use the attached link for information on the process of having your iPhone evaluated. 
    iPhone Repair and Service - Apple Support
    Best regards,
    Joe

  • My sons power button on his iPhone 4S does not work any more, does anyone know how much it will cost to fix? 1 year warranty just ran out.

    My sons iPhone 4S power button does not work any more, does anyone know how much it costs to fix? 1year warranty has just expired

    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

  • Can not color label more than one file at a time

    Hi,
    I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
    Wether i select two, twenty or twohundred only one file gets color labeled.
    It doesn't seem to matter if i assign a color label through the File menu or right click > label.
    Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
    Does anyone else have this issue and/or a fix for it?
    Thanks,
    Jay

    Aaaaanyone ?

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

Maybe you are looking for