Tcode or table to view the details of user
Hello Experts
Can anybody tell the TCode or Table which tells the details of user with the report used by them on last used date.
Thanks in Advance
Neha
Ha ve a look at all the RSDDSTAT* tables if BI statistics is active, you might also want to install the relevant BI content to facilitate its analysis. If BI statistics is inactive you'll need to activate it before you can do any such analysis (RSA1: Tools menu).
Eric
Similar Messages
-
Table to view the details of Load Process
Hi All,
Can anyone give me the 'table name' to see the time taken by each component involved in Extraction & Loading process like start time and end time of Extraction, Transfer, Update to PSA, Transfer Rules, Update Rules and Update to Data Target. Or else suggest me the best way to get this details.(Apart from DETAILS tabstrip in Monitor/RSMO) I need to notedown the time for more than 30 cubes and for 30 days.
Thanks in Advance
Regards,
-Adhi.Hi,
If you need more details regarding the complete setup of tables for the WHM activies etc, let me know u r email address or mail me at [email protected]
regards,
ravi -
Table to view the CO settlement document (not tcode)
What is the table to view the CO settlement document.I donot need transaction code..only table pls.
Hi,
Please check the following tables.
AUAA Settlement Document: Receiver Seg
AUAB Settlement Document: Distribution
AUAI Settlement Rules per Depreciation
AUAK Document Header for Settlement
AUAV Document Segment: Transactions
COBRA Settlement Rule for Order Settlem
I hope this will solve your purpose
Regards,
Jigar -
Unable to view the details of BAdi method
Guys,
Using SE18, I was able to view the different methods inside a particular BAdi. I had double clikced on a Method name and was able to view method parameters. However, I am not able to view the details of this method by double clikcing on it.Can I go much deeper at this level and just view the code with out an access code ?
IV_PAREAID Importing Type /SAPAPO/TS_PAREAID
IV_INFOPROV Importing Type RSINFOPROV
IV_VERSIOID_TO Importing Type /SAPAPO/VRSIOID
IV_KEYFIGURE_FR Importing Type RSDIOBJNM
IV_RELEASE_TYP Importing Type /SAPAPO/MSDP_RELEASE_TYP
IT_FREE_CHARVALUES Importing Type /SAPAPO/TS_SEL_OBJECT_TAB
IT_TAB Importing Type /SAPAPO/TS_TAB_EXT_TAB
IT_COLS Importing Type /SAPAPO/TS_COLS_EXT_TAB
IT_LINES Importing Type /SAPAPO/TS_LINES_EXT_TAB
ET_MSG_TAB Exporting Type /SAPAPO/TS_BAL_MSG_TAB
CT_MATLOC_TAB_DETAIL Changing Type /SAPAPO/TS_MATLOC_TAB_TAB
CT_PLOB_VALUES Changing Type /SAPAPO/TS_PLOB_VALUES_TAB
CV_CHANGE_SPLIT Changing Type FLAG
Further, what does the prefix IV, IT, ET, CT, CV stand for and whats their significance ?
ThanksIts just a naming convention :
Subcomponent name
Name of a subcomponent of an object type, that is, a parameter or an
exception. The name can consist of alphanumeric characters and the
special characters underscore (_) and forward slash (/).
The name may only contain uppercase letters. The Class Builder
automatically converts lowercase letters into uppercase. However, if you
use the Class Library API to insert a name, there is no automatic
conversion, and an error occurs.
Yes you can define internal table in Method and its same has writing a program in SE30 like can call function module etc in method.
You can debug BAPI method by entering into mehtod and type /h (where you write transaction code ) and enter , it will take you to debug mode.
Manish -
Cannot view the detailed Email date and time about the meeting request
Hi,I am unable to view the detailed message and Date and time of a meeting request in the default Email app in my Sony Xperia P mobile. Even when i select the calender it does not defaultly go to the meeting date. I need to manually select the date to see the meeting. I cannot see the meeting details without accepting it.I have seen the better behaviors on HTC One V and Galaxy Nexus where full meeting details including message, Date, time, venue appears in the meeting request message.Is there any setting which needs to be changes or is it the limitation of the phone app.Regards,Pratik Ranjan
Hi Johan,Im also seeing this on my xperia s, ICS. Here's some additional info i have after some testing:Work have Exchange 2010, I have sent calendar invites from outlook 2007 and 2010 clients and it works for the 2007 clients as it automatically adds the meeting details into the body of the request, something it doesn’t do in 2010, so it may be the way the calendar form has changed in 2010. It also works fine when i get an invite from an external person.This however is just adding the text into the body, I too have tested with the HTC One S and Samsung Galxay S3, bith use the stock email and both display the time as part ofthe invite no tin the body of the invite,
In doing the testing I have also found another issue. I have found that it doesn’t inform you of a calendar conflict.ThanksMike -
SAP TABLE TO VIEW THE APPLICATION LOGS OF IDOCS
Hi,
Can you please suggest where I can see the table to view the application logs in idocs. We can see this individually in SLG1 or MM90. But I need to see it collectively to see all the error messages. Please suggest.Hi
You can check tables:
EDIDC- for control records
EDID4-for Data Records
EDIDS-for Status records
You can also use T Code WE02 or WE05
Thanks & Regards
Sanil Bhandari -
Unable to view the details data in "Employee Self-Service 4.0" of HRMS
Unable to view the detail data in "Summary of Absences" when click the "Leave of Absence " button in "Employee Self-Service 4.0",
the whole login path is : "Employee Self-Service 4.0" ===> "Leave of Absence "
It shoud be seen the "Summary of Absences " ,bacause there are data in the datebase ,but when I click in it shows "No data exists."Dear user11977612 :
Thank you for your answer, I have been check the profile :HR: Self Service HR Licensed, It had set YES. Thank you! But it still no records
Dear Naveen:
The page can open with IE7 and it just can not be shown the detail records (llike in "Absence Type" the detail ===>Advance Leave ) in the IE page.
Regards,
Edited by: user11975899 on 2009/10/13 下午 7:17 -
How can I view the details of a pending plan change?
I received a flyer saying I could probably save some money if I came in and changed plans. I went to my local Verizon store and met with an associate who set me up with a new plan to start next billing cycle. He didn't give me any paperwork and I can only find the details for the current plan. How can I view the details for the new one?
Hello pitviper1091!
I apologize that you did not receive a receipt in the store. You cannot view a future dated plan change on My Verizon, until the date that it goes into effect. It should go into effect on your new bill cycle. You could return to the store to request a copy of the paperwork, or we could assist you in checking your account to confirm what changes will occur.
MichelleH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
View the Apllication Server User
I have an application runing in AS 10g.
Users are connected through browser.
I want to view the list of users details who currently using the application.What kind of application are you talking about? Is it forms, J2EE, PL/SQL? Also, are you using SSO, personal accounts, logging tables, logging anyway...
Without a proper description of the application you mentioned, there is no way you can get an answer. -
To view the list of users in Satellite Systems from Solman
Dear Friends,
We wish to view the list of users in a satellite system (say ECC5.0) from solution manager 4.0, can anyone help us to find the same.
Regards
SenthilHello Senthil,
You mean the list of BP associated to the satellite users already created? If this is the case
in DSWP, choose a Solution that has your satellite as system and go to Edit->BP
Add the satellite system to the list and if I don´t remember wrong you will get the
BP for the satellite users already created in the righ chart.
Sory if I don´t get the correct question?
Best regards,
Dolores -
Error while trying to view the details table from Show/Hide icon
What we are having is two tables, Outer and Inner, having Outer VO and Inner VO,outer VO is linked with inner VO. Now when I am trying to view the inner table
through Show/Hide icon to see the details of the table ,I am getting an error like ...
The record with primary key values {2280} could not be found in view object MisForecastHeadOfiiceAM.InnerTableVO_OuterInnerVL_InnerTableVO.
I want to know how this error can be resolvedHi Abdul,
We are not getting error while searching. As said earlier
While search for the first time > We could see proper results in out table and Even show/hide is working fine and display correct data in Inner table
When searching for the second time with different criteria > We could see proper results in outer table and on clicking show/hide (to view inner table data), we are getting error.
The record with primary key values {2280} could not be found in view object AM.ViewLinkVL_InnerTableVO
From the error message, we found that its trying to get the row (of inner table) pertaining to first search results and not for the outer table row in context to second search results. -
How to view the detailed data from the Planing cube.
Hi friends , we are having one planning cube which end use will enter the data in to this cube using query input layout.
End user want to view the data which he has loaded in to the realtime cube to cross verify.
I try to build this through the query designer on real time cube but iam getting aggrigated values. i need the detailed log , how to achieve this . There is no DSO to develop the query. do i need to use the planning moduler for this or any other alternative.
Could any one has the solution for this.
Regards,
Sruthi.Hi , i put all the characteristics in the drill down bu iam not getting the detailed log, as you know iam getting the aggrigated summ of the values are displaying.
For Ex user will enter the below mentioned values in to Real time cube
Fiscal Period Customer Values Currency
006.2008 20000 $6 USD
006.2008 20001 $6 USD
006.2008 20010 $6 USD
above values are in the cube but when u try to display those valus using the query designed you will get sum of $18 , my requirement is to display table as it shown above.
Pls help me on this.
Sruthi. -
How to view the details of the signature
I received an application (JAD and JAR), the jad is signed, however I do not know the issuer of the signature. Is there a tool to view the signature details of an application? The signature is available in the jad file under the attributes:
MIDlet-Certificate-1-1:
MIDlet-Jar-RSA-SHA1:
MIDlet-Certificate-1-2:
ThanksDo you use Wireless Toolkit ? If yes, check User Guide (chapter 6 Security and MIDlet Signing in WTK 2.5.1). As far as I understand, guide suggests to [use the MIDlet signing window|http://i44.tinypic.com/2qbvbwp.jpg] to work with certificates.
-
Need some help on CRM tables which have the details of the order created
Hi,
Can anyone help me in knowing the tables which stores the information of an order . I need to find the status, priority, category and the partner functions of a particular order. Is there any table which stores all these data.
Thanks & Regards,
Anuradha.PHi Anuradha,
basically you link partner function of an order with view:
CRMV_LINKPARTNER.
In this view you can find :
Guid of an order coming from CRMD_ORDERADM_H
Guid of BP coming from BUT000,
and <b>partner function</b> stored in field PARTNER_FCT.
For sold-to-party you have to select 00000001.
Concerning priority and category I suggest you investigating with "where used list", tool in which tables the data element is used.
Then start from CRMD_ORDERADM_H or CRMD_ORDERADM_I , and with the guid go to CRMD_LINK.
Extract the proper Guid set and try going into the table/s you select, previuosly.
Regards,
AndreA
<b></b> -
T.Code for Viewing the details of characteristic in Production order
Hi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan
Edited by: srinivasan Lakshmanana on Jan 12, 2008 3:07 PMHi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan
Maybe you are looking for
-
ALV GRID Tool bar options not working
Hello Experts, I copied the standard tool bar into my program with the name 'ZSALV_STANDARD' and displaying the output in the grid format in a container with the method set_table_for_first_display When I execute the program the standard buttong in th
-
Reading rule sets from an XML file
Hi all, How can I read rule sets from an XML file? I have been given some rules in XML format and using those I have to query some content. I am using WLP4.0 Also how can I code rules in java? Thanks in advance.
-
Synchronizing photo corrections to multiple back-ups in Lightroom 5
Hi, I have backed up my images on three different external Hard drives, and have "ADDED" each to the Lightroom catalogue so that I can access the images from any of the Hard drives. I make most of my image corrections and adjustments using my main
-
2 decimal places in alv output
Dear Experts, I need to display an quantity value with 2 decimals places in output. I have tried many options like, 1.wa_fieldcat-decimals = '2'. 2.wa_fieldcat-decimals_o = '2'. 3.wa_fieldcat-ref_table = 'VBAP'. wa_fieldcat-ref_field = 'NETPR'. But
-
A monthly amount is entered into a variable rate profile. That amount is multiplied by 12, then divided by 27 pay periods; that is the amount passed to payroll. We only have 26 pay periods for 2011. This is resulting in bi-weekly payroll deductions t