Tcode PFAL there is no model view for the distribution of HR Data.

Hi friends ,
i am facing new problem,i want to send iDOC to other system.
previeous its working fine.
but to day when i open tcode PFAL.
it give me Error:"There is no model view for the distribution of HR master data"
what is the solution for that.
i want to send HR Data.
its urgent please give me any solution ithat will help me alot.
thanks in advance

There is already Distributed Model Created.
can u give me annother tcode so i can send Metarial data, by IDOC.
please help me.
Thanks

Similar Messages

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

HT4972 Will there ever be an update for the 2G models or are they now obselete?

Will there ever be an update for the 2G models or are they now obselete?

Pretty sure they're well past their "expiration" date.

Is there a razor view for the report control?

Is there a razor view for the reportviewer control or at least is there planned by SSRS team.
We are working on MVC application and try to avoid include webform just for the reportview control

Hi John,
Based on my research, we cannot directly add ReportViewer Control in a razor view. While we can create an aspx page or web form from where we can show our report using report viewer control in the MVC application. For more details, please refer to the following
thread:
http://stackoverflow.com/questions/6144513/how-can-i-use-a-reportviewer-control-in-an-asp-net-mvc-3-razor-view
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Why there iare no accounting views for KMAT material ?

Hello PP members
Why there are no accounting views for KMAT material, in a Standard SAP sytem
Is is because KMAT material cannot be valuated
Please clarify

Baskaran, PP consultant, Rajesha:
Thank you for replies
Round Robin of discussions
Valuation is done at quantity / value level (KMAT - No valuation is done at either Qty/value level)
KMAT is neither valuated or stocked for that plant when GR is done, the only thing it will do update the sales order
As KMAT is configurable material, the system calcuates the material cost dynamically as per the customer selection
Accouting view is used to select the correct G/L account during stock postings
The above can be viewed in OMS2
Due points have been assigned

I need the model number for the iPod touch 4th Generation 16GB for my granddaughter's repair. Back of iPod too worn to read, iPod wont turn on to find there.

I need the model number for the iPod Touch 4th Generation 16GB. My granddaughter's will not turn on and the back is too worn to read the model number. Need for warranty request. Thanks

Model Number
A1367
Order Number
MC540LL/A (8 GB Black) ME178LL/A (16 GB Black) MC544LL/A (32 GB Black) MC547LL/A (64 GB Black) MD057LL/A (8 GB White) ME179LL/A (16 GB White) MD058LL/ (32 GB White) MD059LL/A (64 GB White)

Is there a way to view all the table names in a certain schema?

Is there a way to view all the table names in a certain schema?

SELECT table_name FROM user_tablesThat won't do much good given this piece of information:
i am trying to finish a lab for school but i don't know what tables are in my
professor's schema. The appropriate solution is
SELECT table_name
FROM all_tables
WHERE owner = 'PROFESSOR_YAFFLE'
/This will show the names of the tables which Prof. Yaffle has granted to us.
Cheers, APC

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

Is there an iCloud Drive app for the iPhone?

Is there an iCloud Drive app for the iPhone? I have a 5c that's running 8.0.2.
I was able to install iCloud Drive on my pc. I placed some files out there and would like to view them on my iPhone but I can't seem to find the iCloud Drive app in the app store.
There appears to be an iCloud Drive app according to the pictures here: http://www.apple.com/icloud/icloud-drive/.
Is the app not available yet?

I've had an android phone since they first came out. Verizon took forever to get the iphone and by the time they did, I was so used to having a phone with a big screen and was already on a 4g device and I didn't want to take a step back to 3g and a smaller screen so I never gave apple a try. I recently sold my android phone in preparation for the next android phone release and I broke my temporary phone trying to it's replace it's cracked glass (something that's much easier to do on an iphone btw) so I had to find another temp phone. With the release of the iphone 6/6+ and everyone going so crazy about it, I decided to borrow a friend's old 5c for a month to see what all the hype was about when it comes to iphones while I wait for my android phone to come in. So far I can honestly say aside from a few things here and there, I haven't really felt like there's much of a difference to warrant the flame wars that I see on android vs apple. Some things work better on iOS for sure but there are some things I'm used to doing on android that I can't do on iOS. I really like it's overall simplistic feeling. The people on the far left and far right in terms of apple over android or android over apple and their arguments are pretty comical to me now that I've had some exposure to both.
Anyway in terms of the iCloud drive, from everything I've read it looks like it'll be identical to Google Drive which I've been using for years but without an app, it's definitely confusing on how I get to my documents and photos that I've stored on my iCloud Drive. With android, before the app I could go to the desktop site for google drive and access my documents. When I try to go to icloud drive from safari on my phone, it automatically takes me to "set up icloud tutorial" even though it's already set up on my phone. I'm happy to find that I'm not the only one that's confused by apple's description of the implementation and what's actually implemented.
I still have a few weeks before I get my android, but I'd be lying if said I haven't considered cancelling my preorder of the note 4 and grabbing a 6+ to give an iphone more than a months trial. I mean in the end, people buy iphone's like candy so it's not like I'd be stuck if I end up ultimately not liking it.
Thanks for your responses, hopefully they implement it's full functionality while I still have time to decide one way or another.

Is there a BluRay DVD player for the HP HDX 9010nr?

Is there a BluRay DVD player for the HP HDX 9010nr?
This question was solved.
View Solution.

All laptop drives are a standard size and any SATA Blu-ray drive will fit. Remove the rear mount and bezel from you old one and mount it on the new one.
Here is a thread where the guy has done the same thing, Huffer has provided a video. It talks about a Dell and it's a little long, but it does eventually get to the part where the front bezel's are change out.
http://h30434.www3.hp.com/t5/Notebook-Hardware/Remove-black-silver-bezel-from-optical-drive/td-p/605...
This is one from e-bay that will work.
http://cgi.ebay.com/Samsung-Blu-ray-BD-ROM-8x-DVD-RW-Laptop-SATA-Drive-New-/370491248810?pt=PCC_Driv...
It has been reported that the Sony Blu-ray drives are giving problems, but after reading some of these threads, it sounds more like a software problem.
When you install the drive and boot up, Windows will automatically install the driver(s) for you. HP Media Smart DVD is the only Blu-ray playing software that HP has to offer and it can be problematic.
I would recommend to buy some third party software form ArcSoft or Cyberlink. Keep in mind that Cyberlink makes the software for HP, so if you have problems with MS DVD then they may occur with Cyberlink. You can always use their trial first.
Here is a link to MS DVD, I use this on in my dv8 and it will (should) work in your Dragon.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-87326-1&lc=en&dlc=en&cc=us&...
Save it to the desk top and install it from there, not from a temporary folder. If you are using Commodo Fire Wall and/or AVG anti virus software, these have to be disabled before downloading and installing MS DVD.
If you have problems installing MS DVD, post again and there is trick to get it to install.

Will there be support in CS4 for the JVC GY-HM700 files?

will there be support in CS4 for the JVC GY-HM700 files? Of course without rendering neccessary?

I own a HM100, which uses the same EX1 codec. The difference is the HM100 allows you to choose between a MOV and MP4 wrapper. The MP4 wrapper works great in Premiere CS3 and CS4.(just like the EX1)
The HM700 in stock configuration, only saves in the MOV wrapper, which does not work with CS4. You have to buy the Available with optional SxS Media Recorder to have the HM700 save in .MP4.
Now there is a codec you can buy - it is not free- that allows you to view the MOV files. I am not sure that will make it work with CS4.

[Oracle Exports : Help] Public Views for the Design Environment

The Warehouse Builder provides a set of pre-built views for both the design and runtime environments.
http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_3designviews.htm#i696153
My questions -
1. How start this views ? Where I can find them ?
2. How can i seen what table uses this views ?

My Replies?
1.) What do you mean by "start" them? You select from a view just as you would a table. If the view is there and you have permissions, it is available to you. As to where to find them, they are owned by either your repository owner or repository manager user - depending on how you have set things up. But any user registered as an OWB user will have synonyms pointing to the views for the repository to which it is registered.
So, when you have defined a source or target Oracle Schema and registered it as an OWB user, you can simply "select * from all_rt_audit_objects" or whatever else as that user when you want to get information from the views.
2) None of your user-defined tables use these views. These views are pre-packaged select statements against the tables in the OWB repository to make it simpler for you to extract information about your metadata, deployments, and executions of the objects you have created in a given repository. Using a tool like TOAD, Oracle SQL Developer, SQL*Navigator, or whatever other Oracle development tool you use, you should be able to get the source for these views if you want to understand how they are collecting data for you.
Cheers,
Mike

Public Views for the Design Environment

Hi,
I want to select Information from the Public Views for the Design Environment. I need details from the mappings, but can not found the informations.
I can't found it in all_iv_xform_maps and all_iv_xform_map_components.
I build a mapping and user some Functions in the mapping (Transform Operators). Now I want to select the location Information of such an operator.
In detail I need:
1) Right Click on a mapping
2) click configure
3) collapse Transform Operators
3) collapse a function
4)I need the Information under Location.
Sometimes in my mappings there is "Unkown value" and I want to select from the Public Views for the Design Environment these entries.
Can some one help me?
Thanks
Carsten

My Replies?
1.) What do you mean by "start" them? You select from a view just as you would a table. If the view is there and you have permissions, it is available to you. As to where to find them, they are owned by either your repository owner or repository manager user - depending on how you have set things up. But any user registered as an OWB user will have synonyms pointing to the views for the repository to which it is registered.
So, when you have defined a source or target Oracle Schema and registered it as an OWB user, you can simply "select * from all_rt_audit_objects" or whatever else as that user when you want to get information from the views.
2) None of your user-defined tables use these views. These views are pre-packaged select statements against the tables in the OWB repository to make it simpler for you to extract information about your metadata, deployments, and executions of the objects you have created in a given repository. Using a tool like TOAD, Oracle SQL Developer, SQL*Navigator, or whatever other Oracle development tool you use, you should be able to get the source for these views if you want to understand how they are collecting data for you.
Cheers,
Mike

How can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision. r there any apple product specifically for the blind?

how can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision. r there any apple product specifically for the blind?

From the Safari menu bar click View > Zoom In or press Command + on the keyboard to increase the size of the page.
If that doesn't help, open System Preferences > Accessibilty > Settings then select Zoom on the left.
You can also increase the resolution on the dislplay. System Preferences > Displays > Display > Scaled
You can also get help by posting in the Apple Support Communities > Vision forum here.

Hide the design view for the report

Dear All,
I would like to block or hide the design view for the Crystal report.
Please let me know.
Thanks,
Raja

Hi Raja,
It is not possible to hide the design tab in Crystal Reports. However, in Crystal Reports 2008, there is the ability to password protect a file.
Regards,
Wallie

Tcode PFAL there is no model view for the distribution of HR Data.

Similar Messages

Maybe you are looking for