Tcode SLDCHECK error

Dear all,
when I run Transaction SLDCHECK following erro occure , We are using SAP PI 7.0  EHP1 uder oracle and RHEL 5.3
also changed CPIC_MAX_CONV to 2000 and 5000 but problem is still
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
  RFC host:
%%RFCSERVER%%
  program id:      SAPSLDAPI_DPI
  gateway host:
sapdevpi
  gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
  RFC host:
%%RFCSERVER%%
  program id:      LCRSAPRFC
  gateway host:
  gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
Regards
shahid

Hi Kanagaraja,
thankx for reply
1.  in Transaction SLDAPICUST
SAP_CONFIG     1     sapdevpi     50000     PIAPPLUSER
2. Yes  SLD is running
3.  RZ70 ou put
LD DS Start Program
   0: sapdevpi_DPI_00                           : Execute program: SLDRFC
   0: sapdevpi_DPI_00                           : Execute program: SLDMSGSRV
   0: sapdevpi_DPI_00                           : Execute program: SLDLIVECACHE
   0: sapdevpi_DPI_00                           : Execute program: SLDIPSERV
   0: sapdevpi_DPI_00                           : Execute program: SLDINSTSP
   0: sapdevpi_DPI_00                           : Execute program: SLDINSTSC
   0: sapdevpi_DPI_00                           : Execute program: SLDINSTPRD
   0: sapdevpi_DPI_00                           : Execute program: SLDGWSRV
   0: sapdevpi_DPI_00                           : Execute program: SLDDBSYS
   0: sapdevpi_DPI_00                           : Execute program: SLDCOMPSYS
   0: sapdevpi_DPI_00                           : Execute program: SLDCLIENT
   0: sapdevpi_DPI_00                           : Execute program: SLDBCSYS
   0: sapdevpi_DPI_00                           : Execute program: SLDAPPL_SERV
   0: sapdevpi_DPI_00                           : Execute program: SLDASSOC
   0: sapdevpi_DPI_00                           : Collection of SLD data finished
   0: sapdevpi_DPI_00                           : Data collected successfully
   0: sapdevpi_DPI_00                           : RFC data prepared
   0: sapdevpi_DPI_00                           : Used RFC destination: SLD_UC
   0: sapdevpi_DPI_00                           : RFC call failed: Error when opening an RFC connection
   0: sapdevpi_DPI_00                           : Batch job not scheduled
Regards
shahid

Similar Messages

  • The sldcheck error

    Hi all,I had a sldcheck error,the log:
    Exchange Infrastructure: Test LCR Connection
    Properties of RFC destination SAPSLDAPI
      RFC host:
    %%RFCSERVER%%
      program id:      SAPSLDAPI_DXP
      gateway host:
      gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server access settings:
      host name:   dsapxprd
      port number: 50000
      user       : PIAPPLUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     4
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
      RFC host:
    %%RFCSERVER%%
      program id:      LCRSAPRFC_DXP
      gateway host:
      gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    Calling function EXCHANGE_PROFILE_GET_PARAMETER
    Retrieving data from the XI Profile...
    Function call terminated sucessfully
    Retrieved value of
    section   = Connections
    parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
    -> value  =
    Summary: Connection to the XI Profile works correctly
    Who can help me?

    Hi,
    ask your basis guys to check if PIAPPLUSER is not locked in XI......if it is locked, then unlock it......
    check SLDAPICUST if it is having the XI details correctly to access SLD............
    if your PIAPPLUSER is getting locked frequently, then ask your basis guys to change the password of service users in XI using the OSS Note for password change of service users..........
    Regards,
    Rajeev Gupta

  • XI SLDCHECK error

    hi all
    I have installed XI3.0 and created business scenario(R3 4.7 * 110) but during call of SLDCHECK transaction it gives me the following error and doesn't connect to SLD.
    Properties of RFC destination LCRSAPRFC
      RFC host:        %%RFCSERVER%%
      program id:      LCRSAPRFC_EC1
      gateway host:    exxept01
      gateway service: sapgw01
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server address settings:
      host name:   10.147.250.9
      port number: 50100
    Use transaction LCRSERVADDR (XI 1.0) or SLDAPICUST (XI 2.0) if you wish to maintain the SLD server address
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Clearing the local SLD cache
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    ....I've search topics, notes and sdn contents and found nothing on duplicate conversation ids .  if anybody has any idea what could be causing this please let me know!
    THANKS
    nelson

    Hi Chilla
    I finished according to your guide, but it didn't help solve the problem.
    I'd like to write down my configuration and content more clearly as follows:
    1、configuration of R/3 role
      SXMB_ADM-〉Configuration Data(Integration Engine)
      Role of Business System: Application System
      Corresponding Integ. Server : http://10.147.250.9:8001/sap/xi/engine?type=entry
       other field is empty.
       but a mistake is made when testing, it says  "No access to system landscape at
    present"  .
    2、Connecting to the Integration Server
    RFC destination : INTEGRATION_DIRECTORY_HMI
    con type : H
    Technical Seeting tab
        Target Host : 10.147.250.9
        PathPrefix : /dir/CacheRefresh
        Service No. : 50100
    Logon /Security tab
        Logon Procedure : Basic Authentication
        SSL : Inactive
        language : en
        Client 001
        User : Pisuper
        password : ***
    the user and key are already created in the Integration Server with related 权限,but
    when the sysytem is executing the "test Connection",there is dialogue box, and i fill
    in the blanks as follows:
    Resource     dir
    Client       001 （Integration Server clinet)
    User name    pisuper
    Password     ***
    Language     EN
    but a mistake of HTTP/1.1 401 Unauthorized is made when i dial the enter key.
    3、I created a service connected with default_host->sap -> xi -> engine and set it as
    Activate Link
    4、Registering Queues
    5、Connecting Non-Unicode Business Systems has successfully being created LCRSAPRFC、
    SAPSLDAPI and the testing is also passed.
    6、connection created by Tcode SLDAPICUST is as follows:
       Alias : SAP_CONFIG
       Prim : (CHECKED)
       HostName: 10.147.250.9
       port: 50100
       user: PISUPER
       Password: ******
    7、when executing the SLDCHECK,i could logon sld, but problem arising as follows
      Properties of RFC destination SAPSLDAPI
      RFC host:        %%RFCSERVER%%
      program id:      SAPSLDAPI_EC1
      gateway host:    10.147.250.9
      gateway service: sapgw01
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server address settings:
      host name:   10.147.250.9
      port number: 50100
    Use transaction SLDAPICUST if you wish to maintain the SLD server address
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Testing the SLD API
    SLD API ping was successful
    Clearing the local SLD cache
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    List of business systems maintained in the SLD:
      EC1_106
      YH0_800
      EC1_001
      ZDH_900
      EC1_105
    Calling function LCR_GET_BS_DETAILS
    Retrieving data from the SLD server...
    Function call returned exception code     5
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    p.s:the client created on the base of XI3.0 platform is successfully tested and
    executing the own example .

  • SLDCHECK Error

    hi experts,
    the error in SLDCHECK is
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code 4
    => Check whether the SLD is running!
    thanks
    ajai

    thanks for reply,
    i am using PI 7.0.
    in sldcheck all are working good only i got this warming.
    Exchange Infrastructure: Test LCR Connection
    Properties of RFC destination SAPSLDAPI
      RFC host:
    %%RFCSERVER%%
      program id:      SAPSLDAPI_GIS
      gateway host:
    ecc6-server
      gateway service: sapgw00
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server access settings:
      host name:   ecc6-server
      port number: 50000
      user       : PIAPPLUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD s
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy ru
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     4
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
      RFC host:
    %%RFCSERVER%%
      program id:      LCRSAPRFC_GIS
      gateway host:
    ecc6-server
      gateway service: sapgw00
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    Calling function EXCHANGE_PROFILE_GET_PARAMETER
    Retrieving data from the XI Profile...
    Function call terminated sucessfully
    Retrieved value of
    section   = Connections
    parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
    -> value  =
    Summary: Connection to the XI Profile works correctly
    thnaks
    ajai

  • Custom Tcode Authorization Error

    Dear Security Gurus,
    We are getting an authorization while testing Custom Tcode. This tcode is used for Uploading data.
    The authorization error shows missing Activity field value and a field called Operating Concern.
    The SU53 and the Trace(ST01) show the same error even though the role that is assigned to the user has exactly the required values.
    Also Authority Check in the Program of the tcode is maintained for only the Activity field and Operating Concern field.
    Hence we are unable to figure out why the auth. issue occurs even though the role assigned to the user has the missing values
    Please let me know how I can resolve this authorization issue.
    Regards,
    Arjun

    Hi ,
    Below is the Authority check section of the tcode :
    START-OF-SELECTION
      PERFORM F_AUTHORIZATION_CHECK
        AUTHORITY-CHECK OBJECT 'YTIPRC01' ID 'CEERKRS' FIELD P_ERKRS ID 'ACTVT' FIELD '01'
      PERFORM UPLOAD_DATA
        CALL FUNCTION 'GUI_UPLOAD'
          AUTHORITY-CHECK OBJECT 'S_GUI' ID 'ACTVT' FIELD '60'
    Even though I have the ACTVT value 01 and the corresponding CEEKRS (Operating Cncern ) Value in the role I still get the error.
    Thanks,
    Arjun

  • SLDCHECK error when configuring SAP-CRM 7.0 to Single Stack SAP-PI 7.31 Java only

    Hello Experts,
    This would be a usual exercise when we are connecting SAP application to SAP-PI 7.31 JAVA only and the most usually asked question in different ways. I had performed successfully connection test according to Michael Blog or https://help.sap.com/saphelp_nw73/helpdata/en/3b/dec6eaf3ac42fba8f92f2413ec930f/content.htm
    Both SAP-CRM 7.0 and SAP-PI 7.31 JAVA only are hosted on the same physical hardware.
    Surprisingly , when tested with Tx SLDCHECK it shows error that RFC destination SAPSLDAPI and LCRSAPRFC are missing "SLD Configuration error".
    Do we  have to still consider creating the 2 RFC destination SAPSLDAPI and LCRSAPRFC
    Regards
    Rebecca

    Hello,
    Please refer to the following link:
    https://help.sap.com/saphelp_nw73/helpdata/en/48/a9bc457e28674be10000000a421937/content.htm
    Thanks.
    Jim

  • SHD0 Tcode IE02 Error

    Hi SAP Expert,
    I have problem with creating screen variant for tcode ie02.
    I copied the tcode into zie02 then i try to create screen variant for this tcode.
    in first screen when i tried to save the screen variant, the error message appears,
    Requested function SBDCC is not available here
    Message no. V0104
    Is there anyone experienced with this error?
    Please give me suggestion for this.
    Thanks & Best Regards,
    Husin

    Hi Preeti,
    Thanks for your reference,
    i will try to implement the note soon and inform you the result.
    Thanks & Best Regards,
    Husin

  • HRASR_TEST_PROCESS tcode give error

    HRASR_TEST_PROCESS give error.
    let me come to scenario
    When i execute tcode , i select personal number and reason ( leave,seperation etc)
    Then i click on send, and workflow (HCM Form) starts, and it gove to error
    the message is Message:No authorization to read an instance of a process object,HRASR00_PROCESS024.
    i dont get any info if i trace it, and i have assigned SAP_ALL and SAP NEW to the user for testing..
    Thanks,
    Prasant K Paichha

    Hi Prasant,
    record management is used in HCM process for maintining Process Object. There seems to be an issue with that. Please check, if sap note 1128240 can be implemented in your system (validity), and if so, implement the corrections. That shall solve this problem then.
    b.rgds, Bernhard

  • RA Tcode KKA2 error KJ436 (Basic RA version must have valuation category )

    Hello,
    We are having an issue with Results Analysis and would appreciate some help. We are getting the error message shown below when running Tcode KKA2.
    We are using CO plan version 0 and it is set for actual and plan. The RA version (0) is marked as being relevant to settlement. These settings seems to address the error message but I guess we are missing something.
    Any help would be greatly appreciated.
    Thanks
    Joe Hailstone
    ERROR MESSAGE:
    Basic RA version must have valuation category "0" (operational valuation)
    Message no. KJ436
    Diagnosis
    If a version has actual data (see basic version setting), it must be relevant to settlement in results analysis (see maintenance of version of results analysis).
    If a version does not have actual data (see basic version setting), it cannot be relevant to settlement in results analysis (see maintenance of the version of results analysis).
    Procedure
    1. Check the basic version setting in the maintenance of the general versions.
    2. Modify the results analysis version to conform to the basic version setting.
    3. Turn the indicator Version relevant to settlement on or off, whichever is appropriate.

    Dear
    i am not received any input .
    Regards
    SAPFICO

  • LSMW / tcode KB11N / Error with Field KOKRS

    Hi,
    I post this message because Iu2019ve got a problem with a LSMW I created.
    Context : I want automate « Reposting of Primary Cost » with transaction KB11N.
    When I start to integrate my data with SM35 Iu2019ve got an error message on the field KOKRS :
    « Field SVALD-VALUE. Not found in loop of screen SAPLSPO4 0300 »
    + the information is present in import file.
    I donu2019t understand this error message because after to control my LSMW the names of dynpro and field were been given automatically by SAP.
    If necessary I can send the export of the LSMW to private email adress.
    Thanks for you helps ,
    Regards,
    Xavier MONNET

    This point is not solved.
    I'll try to use SECATT as other solution.

  • Tcode FB05-Error Msg Tax Code in GL Account Item

    Dear Gurus,
    User is trying to post incoming payment from customer and enters tax code in FB05 in GL line item no place to enter tax code SAP gives the following error message when Doc is simulated:
    Tax code O1 does not appear in any G/L account item
    Message no. FF753
    Diagnosis
    The document entered contains a customer or vendor item with tax code O1. This does not occur in any of the G/L account or asset items.
    Consequences:
    If you have not entered the cash discount base manually, the system will set it to zero in this item.
    If this item was paid with cash discount deduction and the cash discount amount contains a tax portion, the tax code entered is used for the backdated tax calculation. An automatic breakdown does not take place on the basis of the offsetting items.
    Procedure
    Check whether the tax code was set correctly. If necessary, correct it or enter "**".
    There are, however, also situations in which it makes sense to enter a tax code manually which differs from the offsetting items, for example, during data acquisition.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    Please Suggest should I change the Message Control or any other way.
    Regards
    Suresh

    Hi
    FB05 is used to create reverse postings for accrual and deferral documents.
    Data has to be present already in the system which we are trying to reverse.
    Any changes to existing data would lead to inconsistencies and hence the problem.
    Caio
    Raghu

  • Tcode DBACOCKPIT error

    Dear expert,
    My system is SAP ERP on SQL Sever 2008. when I use tocde DBACOCKPIT, system show error
    52 actions disabled. Reason: monitor objects missing
    Database is not yet configured for monitoring
    RAT provider does not exist : sap_get_princ [[READ_TLIST]]
    RAT provider does not exist : sap_get_princdetail[[READ_TLIST]]
    RAT provider does not exist : sap_get_perms [[READ_TLIST]]
    I cannot use any function. I click button Execute SQL scrip(s) on tab SQL Script Executtion but it is still error.
    Please help me solve this problem.
    Best Regards,
    Edited by: Minh Diep Kim on Aug 24, 2011 5:54 PM
    Edited by: Minh Diep Kim on Aug 24, 2011 5:58 PM
    Edited by: Minh Diep Kim on Aug 24, 2011 5:58 PM

    Hi Eduado,
    I am sorry for replying too late.
    My system is SAP Netweaver 7.02 SPS 4
    SAP_ABA  ___  702 ___     0007 ___     SAPKA70207 ___     Cross-Application Component
    SAP_BASIS     ___ 702 ___     0007 ___     SAPKB70207 ___     SAP Basis Component
    PI_BASIS ___     702 ___     0007 ___     SAPK-70207INPIBASIS ___     Basis Plug-In
    ST-PI ___     2008_1_700     ___ 0004     SAPKITLRD4 ___     SAP Solution Tools Plug-In
    SAP_BS_FND ___     702 ___     0005 ___     SAPK-70205INSAPBSFND ___     SAP Business Suite Foundation
    SAP_BW ___     702 ___     0007 ___     SAPKW70207 ___     SAP Business Warehouse
    SAP_AP ___     700 ___     0022 ___     SAPKNA7022 ___     SAP Application Platform
    WEBCUIF ___     701 ___     0004 ___     SAPK-70104INWEBCUIF     ___ SAP Web UI Framework
    I checked authorization. It's not problem.
    Regards,
    Edited by: Minh Diep Kim on Sep 4, 2011 7:36 AM
    Edited by: Minh Diep Kim on Sep 4, 2011 7:36 AM

  • SLDCHECK error-Check and maintain the SLD content for the current client

    Hi experts,
           I am trying to configure PI on QAS box and getting this error when I ran SLD check. This is the only warning/error I am getting in YELLOW and the other messages were in green so thinking that is ok.
    =============
       Calling function LCR_GET_OWN_BUSINESS_SYSTEM
       Retrieving data from the SLD server...
      No corresponding business system found for system NWQ      client 001
        => Check and maintain the SLD content for the current client
        Summary: Connection to SLD works technically, but the SLD content may need maintenance
       => Check and maintain the SLD data content
    ==========
    I went through some threads and readiness check document but not able to get it resolved because I am a developer and not sure about exact steps. Please give me if you have any feedback and if there is admin jobs involved I will get BASIS help but it is totally my responsibilty to get the system up and running. Any help would be greatly appreciated.
    Thanks.
    Mithun

    Hi Mithun,
        Let me know if there is any recent changes/Patching/Upgradatiions in your server....
    Perform Cacherefresh both in ABAP and JAVA Stacks..
    For ABAP level cache go to SXI_CACHE -> RUNTIME->START DELTACACHE REFRESH
    >>>>SXI_CACHE -> RUNTIME->COMPLETE CACHE REFRESH
    CPACACHE:
    For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
    For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
    Please let me know if this doesnot resolve your issue.
    Cheers!!!!
    Naveen

  • CPIC_MAX_CONV  - ERROR max no of 100 conversations exceeded

    I recvd the "ERROR max no of 100 conversations exceeded" and I could  resolve it by setting  the environment variable CPIC_MAX_CONV to a higher value for my <sid>adm per note 316877.
    What I want to know is where can i check to see if this environment variable actually took effect WITHIN IN SAP (I can see it set in env and when I echo the variable) ? Can I see this anywhere within the SAP land ... in its server logs , property files etc ?
    Also in general when we make changes to environment variables at the OS level pertinent to SAP then where within SAP does this get absorbed and where I can see the new values.
    Pls advise.
    thank you
    regards
    Laxmi

    Hi Laxmi,
    Please check the below thread. I have given a possible solution in the thread.
    Tcode SLDCHECK error
    Cheers...,
    Raghu

  • When OS level changes ??

    hi guys,
    When Operating system level changes from Unix to solaris. What are the places
    in Custom programs/BW has to be considered for change settings.
    for eg : File path or Calling External program or external applications.
    I want listings of places where i have to check for the changes to be adapted to work as same as Unix system.
    Basically i want to know the places where changes will occur in BW  system with respect to SAP R3 4.6C system level.
    Any notes suggestion also welcome. Thanks in advance.
    Suggestion please.
    Thanks.
    Ambi

    Hi Laxmi,
    Please check the below thread. I have given a possible solution in the thread.
    Tcode SLDCHECK error
    Cheers...,
    Raghu

Maybe you are looking for