Tcode SMQ1

Hi Friends,
Can any one please tell me about tcode: SMQ1 in R3
Daily data is transfered from R3 to BW via process chains.
Can any one please tell what is the use of tcode SMQ1(qrfc Moniter) in R3. what type of analysis we can do with this tcode??
what is the meaning of no. of displyed entries and no of queues?? is it is harm if display entries are more?? if so, how to rectify this.
Thanks in advance.
Tony

Hi,
in SMQ1 you will see the outbound queues for your applications MC* and the delta queues for your initialized deltas, BW*.
Let's take application 03.
When a user is poting a material document the number of entries in MCEX03
will increase.
When the collective update job will run (the job scheduled via LBWE for this application), the data of the outbound queue will be passed to the correponding delta queues; in our our case, MCEX03 entries will decrease and the BWCLNT2LIS_03_BF and/or BWCLNT2LIS_03_UM may increase.
At this stage RSA7 is showing the data which would be extracted from BWCLNT2LIS_03_BF.
When you request a delta load from BW, the entries in BWCLNT2LIS_03_BF, resp BWCLNT2LIS_03_UM will decrease (these entries are reflecting the number of LUWs Logical Unit of Work). The number of units decreased corresponds to your previous delta request, not the current since you can always request "the repeat of the last delta"...
hope this helps...
Olivier.

Similar Messages

Entries in SMQ1 and RSA7

hi,
I have few delta queues running very fine in system.But I am bit
confused about tcodes smq1 and rsa7.If i am not wrong after running all jobs
( i.e. fetching data into BW ) entries in quesue must show 0.But it is not happening.
When will they become 0 or they never show as zero.
Thanks,
Prasanna N.

HI,
If it is production system before upgrade get an outage of about 20 to 30 min and run Collective run jobs and move the delta queues from LBWQ to RSA7 and then to BI. As you are pulling the deltas during outage no posting will be there and you can leave the system for basis for outage.
It is mandatory to clean up the queues before giving the system for upgrade as during upgarde there may be possibility of queues being corrupted saying change in structures and it may raise issues during upgrade open queues are available.
Hence clean up the queue during outage ie lock all users for posting and do the activities.
Thanks,
Arun

Doubts on t-code SMQ1

Hey guys ,
I have many doubts regarding tcode SMQ1.
1.Is it correct that in SMQ1 ,we see all the queues which are stuck ?
2.If yes, How do we release them or correct them ?
3.Whats the use of various options in the transactions , eg :
lock icon , unlock icon, lock immediately icon, unlock without activation icon.
Please help.
Thanks
SS

thanks Animesh ..
Your answer helped , I also wen through this help topic .It really cleared many of my doubts ..
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
I am closing this topic .
SS

Tran SMQ1

What is the role of queue which we can see in tcode SMQ1. And how does it come into play at the time of extraction.

Hi Amit,
SMQ1 - qRFC Monitor for the outbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
check the below link for more info:
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/e12041c877f623e10000000a155106/frameset.htm.
Regards

Short Dump while checking DataSource contents in R3 (Transaction RSA3)

Hello all,
I am having trouble with a DataSource (2LIS_11_VAITM) in the R3 Source System (IDES 6.0). When I try to view the contents of this DataSource through Transaction RSA3, I get the following Short Dump Error.....
Could someone pls help me with this.
Thanks,
SD
============================================================================
Runtime Errors         CONNE_IMPORT_WRONG_STRUCTURE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          18.03.2009 09:56:23
Short text
     Error when importing object "MC11VA0ITM_TAB".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCEX" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
      not caught in
     procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to import data, the
     structure of the complex object "MC11VA0ITM_TAB" was not compatible with the
     target object. The error occurred with component no. 31.
Missing RAISING Clause in Interface
     Program                                 SAPLMCEX
     Include                                 LMCEXU06
     Row                                     1
     Module type                             (FUNCTION)
     Module Name                             MCEX_BW_LO_API
Trigger Location of Exception
     Program                                 SAPLMCEX
     Include                                 LMCEXU06
     Row                                     263
     Module type                             (FUNCTION)
     Module Name                             MCEX_BW_LO_API

Hi SD,
The 11_Vaitm is a LO datasource, before checking its data setup tables need to be filled for it.
For filling the setup tables, first you have to delete the existing setup table data and ensure all the delta queues are empty.
Delete the setup tables: Go to TCODE LBWG and in the application give 11 and execute.
Delete all entries in Delta Queue, TCODE RSA7 for application 11.
Delete the entries in logistic queue: Check in TCODE SMQ1, if there are any entries for application .
Refill the setup tables: SBIW -> Settings for application specific datasources -> Logistics -> anaging extract strucutre -> Initilization -> Filling the setup table ->Application specific setup of data -> SD-Sales order perform setup.
Then try RSA3. Hope it helps.
Regards,
Pankaj

BP replication from CRM to R3 Error

Hi All,
We are working on CRM 4.0 Unicode version. The details of the system are as follows
SAP_BASIS     620          0056     SAPKB62056
SAP_ABA     620          0056     SAPKA62056
BBPCRM          400     0009          SAPKU40009
PI_BASIS          2005_1_620     0005     SAPKIPYJ55
We are working with R/3 4.7 Non Unicode version the details of which are as follows
SAP_BASIS     620          0056     SAPKB62056
SAP_ABA     620          0056     SAPKA62056
SAP_APPL     470          0021     SAPKH47021
SAP_HR          470          0030     SAPKE47030
ABA_PLUS     100          0009     SAPKGPBA09
EA-IPPE          200          0013     SAPKGPIB13
PI          2004_1_470     0001     SAPKIPZI51
PI_BASIS          2005_1_620     0005     SAPKIPYJ55
EA-APPL          200          0007     SAPKGPAB07
EA-DFPS          200          0007     SAPKGPDB07
EA-FINSERV     200          0007     SAPKGPFB07
EA-GLTRADE     200          0007     SAPKGPGB07
EA-HR          200          0011     SAPKGPHB11
EA-PS          200          0007     SAPKGPPB07
EA-RETAIL     200          0007     SAPKGPRB07
BP-R3PF          470V2          0000     -
ST-A/PI          01F_R3_470     0000     -
ST-PI          003C_620     0000     -
I ] Problem
We are having problem while replicating the Business Partners from CRM to R3. When we create a Business Partner ( Type People) through transaction BP on the CRM server it creates an entry in table but000 on the CRM side but the same entry does not exist in kna1 table on R/3 server.
When we check the BDOC through transaction smw01 on the CRM server there exist an entry with BDOC State Description " Send to receivers (not all have confirmed)" for BDOC Type BUPA_MAIN.
II ] Configurations
We have done following settings before creating Business Partners through CRM
Settings on CRM Server
1> RFC Destination "CARDONR3_DEV" for R3 server is defined in sm59 on the CRM side and is working OK.
2> Through transaction BUCF we have defined a number range named C1 ( 0005000000 to 0005999999) with External flag deselected.
3> Through SPRO we have defined a grouring C001 (CRM Customer) and assigned number range C1 to it.
Settings on the R3 server
1> RFC Destination "CMDCLNT110" for CRM server is defined in sm59 on the R3 side and is working OK.
2> Through transaction OVZC we have defined cutomer number range named C1 ( 0005000000 to 0005999999) with External flag selected.
3> Through transaction OVT0 we have created Cutomer Account Group named Z001 which is copy of 0001 (Sold to Party). Number range C1 is assigned to the account group Z001.
4> Through transaction VOPA we have maintained the Partner function for customer master i.e Acct Grp Z001 is assigned to Function SP.
5> In transaction PIDE under CRM -> R3 assignment we have selected account group Z001 to Classification type B (i.e Customer)
III ] Procedure Followed
1> On the CRM server we execute the transaction "BP" .
2> We Click on Create Person button.
3> Following Selections are made
     a) Create in role : Sold-To-Party
     b) Grouping : CRM Customer
     c) Field Title, First name and Last name are selected
     d) In the tab Classification we select R/3 Account Group as "0001". System does not allow us to select the R/3 Account group "Z001"
4> On Saving the entry Business Partner is created in table but000 on the CRM side.
5> The above entry is not replicated in table kna1 on R3 side as expected.
IV ] Observation
We are not able to select account group "Z001" in the BP creation screen. When we run the Intial Load (R3AS) on CRM server for object "DNL_CUST_ACGRPB" (i.e AccountingGrp Business Partner) (Replication from R3 to CRM) it shows the status done in screen R3AM1 but the entry for account grouip Z001 which is created manually on R3 side during the configuration phase is not replicated on the CRM side.
We have referred a note for the above error which said that the basis patch "SAP_BASIS" should be at level 56 but we are already on Patch Level 56.
Please guide us.
Thanks & Regards,
Yatin

Hi Yatin,
Glad to hear one of the problem has resolved.
In order to simplify the analysis, I assume few things
from your information :
1. Connection between CRM and R/3 are correctly run
2. Other necessary customizing Objects relate to BP
   have been downloaded properly to CRM.
Few things you can check :
1. Did you enter Correspondence Language & Language
   in CRM BP ? just make sure you did.
2. Try to complete minimum data such as Search Term,
   Street/House, Postal Code / City and Country in CRM BP.
3. Check the detail Error message in SMW01 (can you get
   more detail - normally you can click on SHOW BDOC Msg
   ERROR)
You also can trace/debug LUW,:
- use tcode SMQ1 to see the stopped queue for that error
transfer
- Click menu Go To -> QOUT Scheduler
Click on R/3 destination and deactivate/deregister it
- In SMQ1 select the error queue, double click on it.
   and after next screen double click again
- Then Start DEBUG LUW
- Insert debug breakpoint in statement Call Transaction
and execute F8
- When it stopped, Change the variable mode to A
it will show you the missing/incomplete fields.
You need to register/activate back the R/3 destination after you have finish debugging.
Hope this helps, let me know the result
Cheers,
Gun.

Error in distribution to R/3

Is there any way of seeing inbound BDocs in R/3?
I know that my message hit the outbound queue in CRM but the sales doc was not created in R/3.
I read an earlier message that suggested that you could deregister the queue in R/3 and then see if the message arrives, but we do not have any inbound queues registered. My order status changes to Error in distribution in CRM.
Does anybody have any ideas?
BTW - I can create an identical order directly in R/3.

Hi Stuart,
Before try further debugging into the queue, I just
wondering if you have check tcode SMW01 and SMQ1 ?
Normally you can see the error message thru these
Queue monitoring. The error message most of the
time is quiet straight forward to tell you what is wrong.
The error message "Error in Distribution" you see
is from document right? Could you tell the error
message from the Queue. This is the easiest way to
find out what causing the Error (but may be not the
very effective way - depends on the error message).
Refer to your question about deregister, I think
what you mean is deregister the Q-OUT Destination
(which pointed to R/3). By deregister this, your
next document created will stopped in the queue where
you can do DEBUG LUW (this is in tcode SMQ1).
I did this before when debugging BP transfer from CRM
to R/3. In your case, with document, should be same way.
Hope this helps.
Cheers,
Gun.

Error while Replicating Objects from R/3 to CRM

Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimal

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

In Message Monitoring Message showing Error:Message

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
Holding
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

hi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal

BPM problem in PI (XI 7.0)

Hi guys!
I have a scenario, where I use BPM. The underlying system is PI 7.0 (NW 2004s). I send Idoc from r/3, send it into bpm, this should make a sync call to web service and the ws response is mapped to ather idoc and sent again into r/3.
I created all the necessary objects in repository and directory and have a problem - when I send the Idoc, it is received by XI, but not processed... the status of the message is Scheduled. In the receiver interface and receiver there are no values in spite i have configured receiver and interface determination...
This is already the 2nd PI, where I have this problem. In the first one I was able to ommit the BPM, but here I am not. Does someone have the same experience? Problems with BPM in PI7.0?
I was looking also on the workbench component monitor - BPM - tha status is yellow triangle.. Sub-parts with NONgreen light are:
Maintain prefix numbers
Configure RFC destination
Schedule background job for missed deadlines
Schedule background job for work items with errors
Schedule background job for event queue
Schedule background job for clearing report
Schedule background job for deadline monitoring
How to fix these problems? is there any guide? Is it a task for basis person or consultant?
Thanx a lot for answer! Points are guaranteed
Olian

hi Olian,
as you are saying like your message came upto XI , but not proccessed so may be its a problem of queue so to TCode::SMQ1 and SMQ2 and clear this QUEUE.
hope this will solve this issue.
your one prob is Configure RFC destination
so check in R/3 sys Tcode : SM59 for RFC Destination
can you make remote login and connection test , if not so make technical Setting Properly.
hope this will help
regards
HONEY

FlatFile-XI-IDOC scenario

Hi,
I am sending file to r/3 as IDOC.The file is coming to XI without errors.In SXMB_moni,it is showing successfull.In message display tool as well as in SXMb_moni no data regarding receiver.It is showing status scheduled for outbound processing in SXMb_MONI.Where could be the problem? Is any thing i missed out?
tnx in advance

Hi,
check TCODE: SMQ1, SMQ2
if there are no errors over there
have you registered your queues in TCODE: SXMB_ADM?
Regards,
michal

Securing payload in message monitoring using SAP note 1370334

Hi Experts,
I am working to implement SAP note 1370334 to PI server.For that i have created :
1. an xml file having actions and roles according to the SAP note and zipped in .EAR file and given to BASIS team to deploy that .EAR file.
2.BASIS deployed that .EAR file successfully.
To test whether the SAP note has been uploaded successfully or not, we asked BASIS to create two 'test user ids' with minimum authorisation.
When I am testing through RWB to see payload without assigning any roles to the created test user, it is showing 'No authorisation'.
But when we assigned role to one test user, both the test user are able to see the payload.But according to the SAP note, payload should be visible to one user only not to the other.
And according to roles assinged in Action.xml file, display authorisation is only from sender service 'A' to receiver service 'B' but message content are visible for all services.
Canm anyone help me why is it happening or where I am going wrong or suggest me if I am testing in wrong way??
It's Urgent!!!
thanks in advance.

hi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal

2lis_02_itm data extraction problem

Hi,
I activated 2lis_02_itm in ecc6 and run the rsa3 tcod, but it is showing 0 record. is there any way to confirm the records or how to fix that problem, any diag. steps.
Please help me.
Thanks

Hi ROB,
Before performing the above setup filling steps, please make sure that you have deleted the 02 application data from TCODE SMQ1 or LBWQ. You could select the queue and directly delete the data in it, or Run a V3 update. This could be scheduled from TCODE LBWE.
Before filling in the setup tables, you have to first empty the contents of the previously filled setup tables. This could be done by TCODE SBIW.
Please let me know if you need any more information.
Regards,
Pankaj

Status-12 IDOC

Hi all,
Is there any way to check to which receiver port the IDOC has been sent from R/3???
In WE02 , I am getting status as 12-Dispatch ok ..Is there any provision to see to which receiver port this dispatch is done..Because the IDOC has been passed through a program and I dont have authorization to view this program ... So i cannot see the receiver port to which the IDOC is sent..
Points will be rewarded immediately ..
Thanks,
Laawanya

Hi,
You are telling that the receiver port in the idoc is XI port, but it's not coming to XI.
Status 12 means, it will definetly go to the XI. If not, it may struck in TRFC queue.
Go to TCode SM58 and execute the transaction with idoc creation date. You will get list of entries which are struck in the TRFC queue.
Then Press F6 selecting every message in the Queue, they will go to the XI now.
If the partner of the IDOC configured with the Queus processing, then go the TCode SMQ1 for the entries in the QRFC queue and repeat the same process as above(select the message entry and Press F6)
Regards,
Krishnaraju.
Edited by: v r krishnaraju mudunuri on Apr 18, 2008 2:24 AM

Significance of Inboun and Outbound queue in sales order replication

Hi CRM Leads,
What is the significance of Inbound Queue and Outbound queue in saleas order replication from CRM to ECC.
What exactly happens in Outbound Queue and Inbound Queue.
Thanks,
Sandeep
What

Inbound - Tcode: SMQ2 : Inbound in the context of CRM and this queue shows the business transaction, master data and configuration data that are coming from ECC into CRM .
Naming Convention for Queues
The names of queues for data transfers from an ERP back end to the CRM server are made up as follows:
R3A (from ERP back end to CRM)
 I for the initial data transfer / for Data Synchronization
 D for the delta data transfer
 U for loading to the ERP back end
 R for Defining Requests
 <Object> Name or part of object name, or the name of the higher-level independent object
 <Key> Only delta queues are subdivided by keys
Outbound - Tcode SMQ1 - Outbound in the context of CRM and this queue shows the transactions and data that are going from CRM to ECC
See more on [Using CRM Queues|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2d9d9707361903e10000000a42189c/content.htm] following the link.
Read the [CRM Adapter Framework|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2e33a2a6c51d24e10000000a421937/content.htm] for advanced learning.

Tcode SMQ1

Similar Messages

Maybe you are looking for