TCode to fill MKPF Table

Hello experts,
I'm ABAPer,
I need to know what are the TCode(s) to fill Table MKPF.
So far i have found:
- MIGO
- MB1A = GI
- MB1B = TP
- MB1C = GR others
- MB01 = GR PO
- VL02N Posting GI
is there any other TCode?
Thanks & rgds,
Jack

Hi,
Apart from wht u have written, u can add MB04,this u can find in the migo transaction fiels too.
i think this is sufficient.
Reward if useful
Aasif

Similar Messages

Tcode for filling setup tables

Hi experts,
What is the tcode for filling setup tables of 2lis_06_inv ?
Full points will be assigned.
Regards,
Bhadri M.

Hi,
Filling up the set up tables depends on the datasource.
there are different T-codes for the respective extract structures
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Have a look at these discussions:
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
Blogs of Roberto will be useful as well:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
Display Setup Table Data:-
Goto SE11 or SE16 -> MC*SETUP -> F4 you will get all the setup tables choose and display the data
To check completion of dta loading
NPRT t-code... Where u can see the entry with ur user and the Run of ur setup..
Regards
Tg

Tcode to fill setup tables for application 0CS( Customer Service)

Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...

Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points.

Can you help with Tcode to fill this SETUP table? not working for me.

Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR                     Sales Document Header Data
2LIS_11_VAITM                     Sales Document Item Data
2LIS_11_VAKON                     Sales Document Condition
2LIS_11_VASCL                     Sales Document Schedule Line
2LIS_11_VASTH                     Sales Document Header Status
2LIS_11_VASTI                     Sales Document Item Status
2LIS_11_V_ITM                     Sales-Shipping Allocation Item Data
2LIS_11_V_SCL                     Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL                     Sales Document Order Delivery
Thanks

Ok,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks

How does SAP updates MKPF Table Through TCODE MB0A

Hello There,
how does SAP updates MKPF Table Through TCODE MB0A ( POST GOODS RECEIPT )? I tried to debug the same by posting GR, but could not figure out.
Awaiting Reply
Santosh

Hi ,
These are the table that are updated through the MB0A ,,
DGESV DMAEX DMAKT DMAPE
DMARM DMEAN DMKAL DMLAN
DPROW DQMAT DUNGV MARA
MARC MARD MBEW MFHM
MLGN MLGT MPGD MPOP MVKE,
MCHA, MCHB, MCHD.
Regards,
Bharani

Error while filling setup table

Hello all
I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
could anyone tell me what this error is referring to ?
thanks

Hi DK.............
I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
Exchange rate table is TCURR.
Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
Regards,
Debjani...........

Can we select desire fields while filling setup tables?

Hi
When we fill setup tables we have some fields over there on which we can put some conditions & we can fill setup tables for that particular conditions..
Now take example of datasource 2LIS_04_P_COMP..
To fill setup tables I went in tcode OLI4COMP... I want to fill setup tables for some particular date range...
I have only 5 fields in OLI4COMP.. I dont have field Posting date BUDAT there...
I want to refill setup tables by usiing selections range on BUDAT but its not available in OLI4COMP..
How to achieve this?? Please Help..
Regards
Swati

Hello Swati,
You can not do the fill with the date range if there is no entry.
The alternative approach is that you can collect the document which belongs to your date range and then give that selection at the Document selections.
For this you need to check the documents from the base tables of your application.
This will solve your issue. I hope you might have deleted the earlier Setup tables before doing this activity.
Hope this helps.
Thanks

LO-COCKPIT: error in Filling Setup tables

Dear Guru's:
While filling setup tables from tcode: sbiw, I am getting following error:
EXTRACT STRUCTURE NOT ACTIVE OR BW NOT CONNECTED.
Bw is connected with R/3- I also have checked the connection thr' SM59, its working.
And even Extract structure is Active.
Then why this error is coming?
Pls let me kno.
Points will be rewarded.
Thank you.

Are you on Developement? If it is, please go to RSA6, look for the data source, and see if the extract structure is actually active, there may be one or more includes, check each one of them, if everything is fine, I would just reactivate it and move it to quality and production. If that happens only in Production, but it is fine in development, then I would make sure the development and production sytem extract structure matchs. Sometimes, someone modifies the development but never moved it to production. Check the last transport created for that extract structure too.
thanks.
Wond

Fill mkpf-bktxt field.

Hi.
I'm looking for user-exit or BAdi for TCode migo, witch can fill mkpf-bktxt before document save.
Regards
Bartek

Hi,
Check the BADI LE_SHP_GOODSMOVEMENT. The method CHANGE_INPUT_HEADER_AND_ITEMS has a changing parameter "CS_IMKPF", which has BKTXT in it..
The documentation of the BADI says this...see whether this can be used..
<b>USE</b>
Application component: LE-SHP-GI
You can use the Business Add-In LE_SHP_GOODSMOVEMENT to influence the
data at the interface between delivery processing and goods movement
(goods issue/goods receipt).
The Business Add-In LE_SHP_GOODSMOVEMENT is called at the following
points:
Post goods issue for outbound delivery
Post goods receipt for inbound delivery
Thanks,
Renjith
btw Welcome to SDN !
Message was edited by: Renjith Andrews

How to fill setup table for Application 18 Customer services

Hi,
How can I fill setup table for application 18.
Regards,
ST

Hi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy

Tcodes for all Setup tables.

Hi all,
Can you give me the list of transaction codes of all the setup tables for their corresponding datasources.
It would be a gr8 help.
Thanks in advance!
Regards,
Vineeta.

Hi,
Transactions to fill setup tables
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Hope this helps.
Thanks,
JituK

Delete and Fill Setup table

Hi Experts,
Can anyone tell me the steps to delete and fill setup tabel??
Thanks
dave

Hi Dave
How are you ?
See the answers below.
Delete setup tables
Tcode LBWG-> ENter application number (ex. Purchasing-02)-> Execute
Fill setup tables
Tocde OLI*BW Path is ->tcode SBIW->Business Information Warehouse->Settings for Application-Specific DataSources->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Perform Setup - SD Sales Orders
Ex. OLI7BW for setup for SD sales orders.In this screen mention the values for document data restrictions such as Sales organization, company code etc, Enter name of run and provide date of termination & time -> future date and time. The setup job will contunue running till this date& time and then will terminate.
Excute the job in background
Hope it helps
Regards
Pradip

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

How can I fill a table of objects from cursor with select * bulk collect???

Hi All, I have a TYPE as OBJECT
create or replace type dept2_o as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
I can fill a table of objects from cursor with out select * bulk collect...., row by row
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
i integer;
begin
i:=0;
dept_o_tab.extend(20);
for rec in (select * from dept) loop
i:=i+1;
dept_o_tab(i):=dept2_o(
deptno => rec.deptno,
dname => rec.dname,
loc =>rec.loc
end loop;
for k IN 1..i loop
dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
end loop;
end;
RESULT
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
But I can't fill a table of objects from cursor with select * bulk collect construction ...
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
begin
dept_o_tab.extend(20);
select * bulk collect into dept_o_tab from dept;
end;
RESULT
ORA-06550: line 6, column 39;
PL/SQL: ORA-00947: not enough values ....
How can I fill a table of objects from cursor with select * bulk collect???

create or replace type dept_ot as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
create table dept
(deptno number
,dname varchar2(14)
,loc varchar2(13)
insert into dept values (10, 'x', 'xx');
insert into dept values (20, 'y', 'yy');
insert into dept values (30, 'z', 'zz');
select dept_ot (deptno, dname, loc)
from dept
create type dept_nt is table of dept_ot
declare
   l_depts dept_nt;
begin
   select dept_ot (deptno, dname, loc)
     bulk collect
     into l_depts
     from dept
   for i in l_depts.first .. l_depts.last
   loop
      dbms_output.put_line (l_depts(i).deptno);
      dbms_output.put_line (l_depts(i).dname);
      dbms_output.put_line (l_depts(i).loc);
   end loop;
end;
/

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

TCode to fill MKPF Table

Similar Messages

Maybe you are looking for