Tcode to find the availability of temporary positions for specific org unit

Hi all,
What is the tcode to find the availability of temporary positions for specific org. unit??
Thanks
Jerry

PPIS
this tcode select the orgunit and positions once

Similar Messages

Retrieving Positions for Specific Org Units

Hi All,
I have a headcount report to develop. It will run for one personnel area at a time. So for the period run, I have to list out all the org units under the personnel area as well as the sub org units. For each of the org units I have to separate positions under them into two group - total of positions with holders and non-holders.
I am using the function RH_STRUC_GET by passing org unit to retrieve positions. May I know which result table to read in order to get positions and how to segregate them into 'With Holders' and 'Non-Holders'?
And also how to get the relation ship between org units because I need to display that in the report also.
Thank you in advance
Regards,
Lily

Hi..
Existing Organizational Units (Report RHXEXI00)
Staff Functions for Organizational Units (Report RHXSTAB0)
Organizational Structure with Persons (Report RHXSTR02)
Periods for Unoccupied Positions (Report RHFILLPOS)
Existing Positions (Report RHXEXI03)
Staff Assignments (Report RHSBES00)
Position Description (Report RHXDESC1)
Staff Functions for Positions (Report RHXSTAB1)
Vacant Positions (Report RHVOPOS0)
Obsolete Positions (Report RHVOPOS1)
Complete Position Description (Report RHXSCRP1)
Reporting Structure without Persons (Report RHSTR05)
Reporting Structure with Persons (Report RHSTR04)
Activity Profile of Positions (Report RHXSTR07)
Activity Profile of Positions with Persons (Report RHXSTR08)
Existing Objects (Report RHEXIST0)
Structure Display/Maintenance (RHSTRU00)
Reporting on an Infotype (Report RHINFAW0)
Starting an HR Report (Report RHPNPSUB)

Two Chief Position for an org unit

HI,
In PPOM I am unable to view two chief position for an 'X' org unit. I have checked in other 'Y' org. unit ( having similar attributes) and there two chief positions are displayed. The validity period and other relationship in both the org units are same.
Can any suggest on how the two cheif positions are displayed for X org unit. (The client is stating that when Y org unit can display two chief positions then why not X org unit).
Thanks,
Sai

Hi Sai -
What is the error or message that you are getting?
By default SAP allows an Org Unit to have multiple Chiefs assigned to it. Are you able to manually assign the relationship to that position via PO13?
If you send over the message, then I can further assist.
Thanks,
Nick

TCode to find the list of Leads &quotations for whcih orders arenot created

HI SAP CRM Experts,
Could you please provide me transaction code(s) in CRM when I want to download list of all leads, opportunities and quotations from which the sales orders havenu2019t been created yet? or How can i achieve this ?
Thanks in advance
Best Regards
Succhi

Hi,
This requirement could probably be solved by using a BI query.
Kind regards,

One Chief Position in One Org Unit

Hi
I want to restrict the number of chief positions in an org unit. One org unit should have only one chief position.
Please guide me on how to achieve this.
Regards
Minal

Dear Minal,
Use T-code-OOZR create an entry with the combination
O-1001-B012-S-0, so that you can restrict 1position as chief of the org unit. In case you want to change the chief then, select another position of the unit and create chief position, automatically earlier position's chief relationship record is deleted.
Regards,
Anil.

Tcode to find the fields ,tables based on description of fields

hi folks,
tcode to find the fields ,tables based on description of fields,POINTS will be awarded for the answers ,plz give reply.

Hello Kumar
Table DD03T contains the field descriptions.
Regards
Uwe

HT5766 Where can I find the size of a download for a software update now?

Hello,
Where can I find the size of a download for a software update now?
Since I upgraded to Mountain Lion (Mac OSX 10.8.3) this information is no longer available in software updates listing you get if you click on the Software Update menu item from the Apple menu.
I found the download size (often hundreds of megabytes for an individual update and sometimes a set of updates might amount to a few gigabytes) to be very helpful, and now that it seems no longer available (I can't even see it on the web page I came to for more information, thinking the download size would surely be specified there), it is frustrating. My current example is iTunes 11.0.3
I would greatly appreicate having this information back in the software updates listing, but since it is no longer available there, and I don't know where else to find it, if anybody can enlighten me to its whereabouts, I'd be grateful.
Thanks and cheers!

stewedapples wrote:
I would greatly appreicate having this information back in the software updates listing, ...
You can leave Feedback for Apple here...
http://www.apple.com/feedback/
stewedapples wrote:
... I don't know where else to find it...
http://support.apple.com/downloads/#

How to find the count of tables going for fts(full table scan in oracle 10g

HI
how to find the count of tables going for fts(full table scan) in oracle 10g
regards

Hi,
Why do you want to 'find' those tables?
Do you want to 'avoid FTS' on those tables?
You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'.

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

Can't find the driver of laserjet p4015dn for windows XP

I can't find the driver of laserjet p4015dn for windows XP. Where can I download it?

Have you gane to the Windows Update website to see if there was a Synaptics Touch Pad Driver made available by Microsoft? Although I did my 8.1 upgrade a while back, I seem to recall such a update was available.
Otherwise if my memory is in error, you can always go right to the Synaptic website and download and install their latest driver. Here is the link.......
http://www.synaptics.com/resources/drivers
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

HT204053 I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have a Phone support for this area)

I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have Phone support for this area)
Please, help me :)

Your best bet would be to try resetting the password to the account that you would like to use via iForgot
Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

How do I find the image name and media_link for an ubuntu image in the Gallery?

I am trying to create VM using Python API.
I have a custom Linux image:
image_name = 'cloudN-Azure-20150205-os-2015-02-05'
media_link = 'https://portalvhds10ssz63zgvb9g.blob.core.windows.net/vhds/cloudN-Azure-20150205-os-2015-02-05.vhd'
When I used this image to create VM, it failed.
I would like to use the ubuntu 1204 image in the Gallery.
How do I specify the image_name and media_link in my Python code? Basically, where and how do I find the image name and media_link for an image in the Azure image Gallery?
Thanks in advance...

hi sir,
Did you try to use "List OS Image"? we can get the property form the results:
result = sms.list_os_images()
for image in result:
print('Name: ' + image.name)
print('Label: ' + image.label)
print('OS: ' + image.os)
print('Category: ' + image.category)
print('Description: ' + image.description)
print('Location: ' + image.location)
print('Affinity group: ' + image.affinity_group)
print('Media link: ' + image.media_link)
print('')
Please try it. Any questions or it doesn't work, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

For what purpose? If the PS3 can act like a Bluetooth speaker than just pair it, no passcode required. The iPod does not have many Bluetooth profiles. However, also see:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
iOS: Supported Bluetooth profiles

Tcode to find the availability of temporary positions for specific org unit

Similar Messages

Maybe you are looking for