TCODE to find users Looged in the system

Hi Friends,
I want to see all the USERS logged into any of the SAP system.
Thanks,
Ster

Programatically we can find using the FUnction module
THUSRINFO

Similar Messages

Trace on User activity in the system

Hi Experts,
We have ECC6.0 installed in our organization, and now we want to find out the below points-
1. Report on what time which users logged into the system.
2. What are the t-codes or transaction they have executed in the system
3. How much time they worked into the system and how much time they were idle in the system
I want a cosolidated report from the system on the above points.
Regards,
Sudip

Hi,
you can run tcode ST03N to see some statistics on the executed reports/transactions in specific time frames of all/single users. Some information about can be requested via user information management (SUIM) as well as tcode AL08. However there is no report that covers all these things.. because this kind of observation may be a problem for workers' representatives.
Regards, RP

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off.

Back up all data before proceeding.
Please triple-click anywhere in the line below on this page to select it:
defaults write -g ApplePressAndHoldEnabled NO
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Log out or restart the computer.

Tracking of user activity in the system

i'm currently on a project which i need to use BI to track the user activity on the SAP System example like the time they log in or out, the transaction thay made etc. was juz wondering if anyone can give me some idea, solution or a head start in my project. thanks.

Hi,
You could use the tables USR01.....thru USR07 etc. These tables contain user information like name,login times etc.
eg .USR07 gives the tcode etc.
You could create a view to extract the appropriate fields. Then create a datasource using either the view or a function module. You'll have to decide your requirement. Then the rest in BI is pretty standard. The only point should be what data to extract from which tables and how...
Assign points if useful
Regards.

Tcode to find out how many times system started

1. is there any tcode exists to find out that how many times that the system is started?

Hi Ramesh,
All this data is stored in log files. You can system start and stop details in SM21 but in SM21 data is available for few days only so if no restart has occured in that period you wont get data there. . If you want to check the last restart date and time check in ST04. You can also get this detail in dev_disp file.
Please award points for useful answers.
Regards.
Ruchit.

Rename SAP username - Find all references in the system

Hi all,
we want to rename (copy and create new sap user id) in our SAP system.
Now we have to find all objects and relationships where the old users are specified.
Is there a way how to find all program where the users are specified?
Z-Programs where users are specified?
Z-Customizing tables where users are specified?
Customizing settings where users are specified?
Any ideas?
regards

>
CC_BC Team wrote:
> we want to rename (copy and create new sap user id) in our SAP system.
> Is there a way how to find all program where the users are specified?
> Z-Programs where users are specified?
> Z-Customizing tables where users are specified?
> Customizing settings where users are specified?
> Any ideas?
> regards
Last time one of our user changed her last name we create new user id for her and then locked and deleted old account.
I don't think its possible to change username from all documents/objects/change documents which users has created under his/her id. The best, and the only way I think is to create new user id and delete/lock old one.
Regards,
Pawan.
PS: profile parameters and favourites can be copied from old user id to new or any other user id.
Edited by: Pawan Kesari on Aug 17, 2010 8:21 PM

How to figure out if users loggin in the system in JSP??

Hi, all
I am developing a website system which consist of
(Client Brower) <----> (JSP/Servlets) <--->(JavaBean)<----->(Database)
model, and the system is used to sell the DVD online, but I am just confused of how can I find out if the user is logged in or not?
Thanks to anyone who read and rely this.

use session variable or cookies to track the user if he / she is logged r not

Workflow mails going to all the Users Maintained in the System

Hi Everyone,
I have a Purchase order workflow which gets triggered through ME21, when the PO need to be approved at every level based on the amount of PO , mail need to be sent to set of users.
We have a step in workflow , where we have created a rule and we pass the current level( eg, L1, L2,L3,L4) to the FM and this FM provides the List of Users for that level and the mail need to be sent to them.
I checked the FM that is working fine but when the workflow gets triggered it sends to every user .
Please let me know what possibly has gone wrong.
Regards,
Raj

hi,
As suggested, did you check in the rule definition, there is an option called "Terminate if Rule resolution without result" , enable and this should resolve the issue.
Since the task is defined as general task, the work item can be executed by all users. And if the rule fails, the above option is not enabled, hence it sends it to all valid users in the system.
Please try this out.
Best Regards,
Saujanya

How to check if a user exists in the system ?

Dear Gurus,
I want to check whether a user ID exists in the system after logon by using VBA. If the user ID exists, then I will update the user's information with external data by using the method user.change.
When running below codes, error occurs and error msg is: "The persistent key for an business object instance of type USER has not been set. Cannot invoke method EXISTENCECHECK"
How can I do to check the user ID existence ?
Set oUser = oBAPICtrl.GetSapObject("user")
oUser.ExistenceCheck "MyUserID", return:=oReturn
Thanks and Regards,
Bao Yan

Mickey,
I'm afraid I never did get this to work properly. However, in the way of all bad/good (delete as appropriate) programmers eveywhere I worked around this problem. I was using this code in Banner.asp to change the view based on the user group so if a given session variable was set a user would see a different view. It works fine with no slow down on the page and you should be able to adapt it to what you need.
Hope this helps.
Neville
Note: Application variables are ones I have defined in config.xml.
Code follows:

<% 'NAH 29/03/2004 ' 'This check the to see if the current user has the group in their membership that has been defined as the group to provide an alternative view of the portal.' 'The group variable is defined in the config.xml as "ALTVIEWGROUP"'
'Do not do this is we have already matched the group'If Session("groupMatch") <> "1" and Session("groupMatch") <> "2" then
Dim pGroup
pGroup = Application("ALTVIEWGROUP") Set Session("groupMatch") = nothing
Dim Plumtree
Set Plumtree = Server.CreateObject("ADODB.Recordset") Plumtree.ActiveConnection = "Driver={SQL Server};Server=" & Application("DBSERVER") & ";Database=" & Application("PLUMTREEDB") & ";" Plumtree.Source = "SELECT GROUPID FROM " & Application("PLUMTREEDBUSER") & ".PTGROUPMEMBERSHIP WHERE (USERID = " & strUserID & ") AND (GROUPID = " & pGroup & ")" Plumtree.CursorType = 3 Plumtree.CursorLocation = 2 Plumtree.LockType = 1 Plumtree.Open()
'If there are records we should have a match otherwise set the session varible to no match.' If Plumtree.EOF then Session("groupMatch") = "2" Else 'By getting here the user should have the matching group but complete one final check to make sure' If cInt(Plumtree.Fields.Item("GROUPID").Value) = cInt(pGroup) then Session("groupMatch") = "1" Else Session("groupMatch") = "2" End If
End If
Plumtree.Close() Set Plumtree = Nothing
End if%>

Is there any way to prevent non-root users from rebooting the system?

This question seems to be addressed many times on the web, but the problem is that none of the wannabe-howtos work on my system. In particular, this doesn't work and this doesn't work either, because (1) I need to keep policykit installed for udisks and other dependencies to function and (2) renaming (or removing) the file /usr/share/polkit-1/actions/org.freedesktop.login1.policy has (again) no effect on the users' ability to reboot and shut down the system. Even more surprisingly, adding the following to /etc/polkit-1/rules.d/20-disable-shutdown.rules has no effect at all:
polkit.addRule(function(action, subject) {
if (
action.id == "org.freedesktop.login1.power-off" ||
action.id == "org.freedesktop.login1.reboot" ||
action.id == "org.freedesktop.login1.suspend" ||
action.id == "org.freedesktop.upower.suspend" ||
action.id == "org.freedesktop.login1.hibernate" ||
action.id == "org.freedesktop.upower.hibernate"
return polkit.Result.NO;
As a result, ordinary users (not in the wheel group and with no special permissions) can simply reboot the machine by typing reboot. I remember that a simple polkit rule (as proposed on the Fedora forum) worked fine just a few months ago, but this doesn't work nowadays. The action IDs mentioned there are no longer listed in pkaction, so it's quite obvious that some changes (and bugs) have been introduced since then. I just need to prevent the users from rebooting the machine and to keep policykit installed. Is there any way to do this?

karol wrote:Do said users have the ability to push the Power or Reset buttons?
No, they don't.
But come on, access permissions are a matter of principle rather than a matter of what you can possibly do with a hammer in your hand. That makes your question somewhat irrelevant to this issue. Imagine someone asking: "How can I protect my home directory from access by other users?" You would then probably ask: "Do said users have the ability to pull out the hard drive and mount it on their computer?"
Even if the users had physical access to the ACPI buttons, rebooting the computer by mistake (via software) would still be much more likely than pressing (or even holding) the ACPI buttons by mistake.
If I call rm -Rf / as a normal user, nothing should happen to the system in terms of availability to other users. Only my home directory and temporary files would vanish, but that's all. This is what permissions are there for. Similarly, when I type reboot as a normal user (no matter if I'm on SSH, on a local terminal or logged into KDE), it should be possible to simply disallow rebooting.
The idea that users logged in locally can restart the computer may be fine for laptops under certain conditions, but it is a bad idea in almost all other cases. In a "kiosk" type environment, for example, the ability to reboot and get to the bootloader can be a huge security hole, unless all your disks are encrypted, and a huge "reliability hole" in any case. Suppose you use a desktop as a home server. You want everyone to be able to log in and to connect a USB flash drive (using polkit and udisks). But you simply don't want the machine to be rebooted. Why is such a simple thing so hard to do?
Last edited by andrej.podzimek (2014-03-10 02:15:35)

How to find user who loaded the procs in DB

Hi guys how to find user who loaded procs in database ..and the date...
is there anyway..
i tried to look at all_objects..but it didnot workout..
thanks

That is correct. You will only have audit rows for item that you are auditing. I am suggesting you audit all DDL in a production database since production jobs should not perform DDL with the probable exception of truncate. This will provide this type of information going forward. It will not help you answer the question of who created the procedure last week?
Auditing is explained in the Security manual and the full comand syntax is available in the SQL manual.
You can easily write a purge the audit data to remove data once it is no longer of interest based on the date the audit row was created.
HTH -- Mark D Powell --

User SM_EFWK stock the system

HI to all,
I have a problem in Solution Manager 7.1 SP06
user SM_EFWK is stock the system
I attached screen shot
need your help
and i have a Dump "time out"
Category               ABAP Programming Error
Runtime Errors         TIME_OUT
ABAP Program           CL_E2EEFWK_LOGGING============CP
Application Component SV-SMG-DIA
Date and Time          24.09.2012 09:11:04
Best Regards
Naor

Dear Jagadish
I checked SMGW
and the user SM_EFWK work very hard for the same system
maybe it's the problem
Please checked the attached
thanks
Naor

Anonymous FTP User created by the system lacks the user name

I'm experiencing some problems and inconsistencies in the Mac OS X Server 10.4.7 FTP service.
First I'll report this behaviour to evaluate if it's worth a bug report.
I read in the that the user with user name 'Anonymous FTP User" and short name 'ftp' is created by the system the first time the FTP server is accessed using an anonymous user.
I noticed that the user is indeed created but its user name field is empty. It doesn't have the associated LDAP record, too.
If I try to manually create a user with an empty user name field WGM errors, so could this be considered a bug?
PowerBook G4 867MHz 12,1" Mac OS X (10.4.7)

Hi
Using NFS u can write the file in XI directories only not on other system
If u want to write in other System (ECC in u r case) u shud use FTP protocol.
NFS ===> xi local path
other path ==> use FTP protocol
thx
srini

FM to find user who locked the object using enqueue...

Hello,
How can I find name of user who enqueued the lock object in ABAP ?
Regards,
Jainam.

Hi Jainam,
See the SAP documentation, e.g. [FAQ - Lock concepts|http://help.sap.com/saphelp_NW04/helpdata/en/cb/168237d30d974be10000009b38f8cf/content.htm]:
How can I find out who is currently holding the ungranted lock? In other words, how can check the program after an ENQUEUE to determine which use is currently holding the lock so that I can let him or her know?
This graphic is explained in the accompanying text Answer
When the ENQUEUE_... function module is returned, the name of the lock owner is listed in SY-MSGV1.
If you don't want to attempt to lock an object and just check who might own a lock use function module ENQUEUE_READ. Lots of comments in the forum...
Cheers, harald

TCODE to find users Looged in the system

Similar Messages

Maybe you are looking for