Tcode to send custom data using custom message type in ALE
I have ceated custom message type and i want to send data to say system B.I wanted to know Tcode to send custom data using custom message type in ALE.
for example:
material data...message type = matmas....tcode = BD10.
like this.
i hope you have got my question.
plz guide me?
regards
mallikarjun mangalore
Hi,
Sending data through ALE is not a single-step process. Take a look at http://www.sapgenie.com/ale/. The paper at http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc is a wonderful resource for the ALE process.
Regards
Similar Messages
-
Can the front LCD Display Panel be use to send custom messages?
Hi all
Can the front LCD Display Panel on Rack mount servers like the P1-1000 or the MS-9218 be used to send custom messages?
Thanks
CarlosYou better ask MSI that directly, as I doubt anybody in here can answer that question.
-
ZHRMD_A Custome message type issue with custom segments.
Hi Experts,
We have implemented ALE in HR system, we have all other ALE using HRMD_A and we have jobs scheduled for HRMD_A message type. We dont want this job should trigger our model and distribute the data. So we have reduced the HRMD_A messae type to ZHRMD_A for basic type HRMD_A06. Every thing fine. After upgrade of SAP FROM ECC6.O to EHP4, PFAL is not creating IDOC segements for custom segments Z*. for example Z1P0002....ETC, though there is personal data for PERNR.
Please guid if you have come across such situation and solution.
Thanks & Regards.
Venkat.Hi Venkat,
In the same way i too have one situation like...have different model view with same message types( and same extension type) for various countries from one sender system.
Should i create reduced message type for each model view?
Or can i use same message type HRMD_A for various model views?
If i can use same message type and same extension type for various model views is there any restriction we need to write in USER EXIT EXIT_SAPLRHA0_004?
Regards,
Lava. -
Problem to create change pointer for custom message type - Idoc creation
Hi,
We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
Can anybody help / guide?Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal. -
Is it possible to use BAPI-ALE to send an idoc using the message control?
Hi Guys
Is it possible to use BAPi-ALE to send an IDOC using a message control?
I have configured the system to send an IDOC when a outbound delivery is saved in the system.
I have done the following.
1). I am using the std BAPI-ALE interface provided by the object type LIKP.
2). I am using the method SAVEREPLICA for which an interface already exists in BDBG transaction.
3). I hace created a distribution model in BD64 and added the BAPI - LIKP and SAVEREPLICA
4). Created a partner profile ( using the generate partner profile option in the BD64 transaction )
QUESTION:
1). How do i associate the custom OUTPUT type created for Delivery ?
2). I tried to associate the custom output type in the Partner profile definition under the message control tab but i am not sure which Process code to be used? Since the partner profile was generated automatically from BD64 it has an entry for SHP_OBDLV_SAVE_REPLICA as a message type in the outbound parameters. and i am unable to find a process code for this Message type in WE41. So what process code should i use in the Message control tab against the custom output type?
3). Do i need to leave the message control tab empty without making any entry? If yes then how would the system come to know that it needs to trigger this partner profile when the custom output type is proposed by the system?
will award points for useful answers
Edited by: Workflow learner on May 29, 2008 8:49 PM"any way"
Applications such as ScreenRecycler, http://www.screenrecycler.com/ScreenRecycler.html, can do it. -
Change pointer for custom message type
Hi,
I have a situation where in, i need to create a custom message type and need to track the changes in the table fields using the Change pointer technique.
Can anybody guide me as to what are the step to be followed after i create the custom message type and how to register the fields of the message type ?
Note : Change document (CDPOS) technique is ruled out in my requirement.
Regards,
Kewal.Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal. -
Error while sending the data using input schedule
Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom. -
How to do search of business partner data, using a message from external sy
Hi CRM Gems,
please send the answer to the following question.
1.How to do search of business partner data, using a message from external system. What FMs, BAPI etc that can be used for this functionality?
your answer will be valuble to me.
Regards,
Krishna..Hi krishna,
Look at BAPI BAPI_BUPA_SEARCH.
Regards.
Manuel -
How to send binary data in the message body
How can we send binary data in the message body that is base64 encoded? below are the requirements
Mime Header.
Mime-version: 1.0
Content-Type: application/octet_stream; name=test
Content-Transfer-Encoding: Base64
Submission must be named "test.sub" (lowercase)
Submission must be base64 mime-encoded
Submission must be sent in the body of the message (not as an attachment)
Only one submission per mail message
No other comments should be put in the body of the mail message (other than the submission)
I highly appreciate your help. If you can provide few examples, that will be very helpfull.
Thanks,
MadanUse Message.setContent to set the content, or use Message.setDataHandler with
a DataHandler constructed with a ByteArrayDataSource. If the content is not
"naturally" encoded in base64, you can enforce it by setting the Content-Transfer-Encoding
header to "base64". Any reasonable mail reader won't care what encoding you use, as
long as the decoded data is correct. -
ALE - error in custom message type creation
HAI friends,
I am new to ALE IDOC, i am creating custom message type for custom table . i created segment, idoc, message type and executed outbound program . in outbound client, status is dispatch ok. so problem in outbound.
my problem is in inbound . i created one function module idoc_input_zmsg. In test tool for idoc processing ie. TCODE WE19, i clicked my segment and then i clicked the inbound function module button . In function module text box my own function module idoc_input_zmsg is available. but when i click ok button, i am getting the following error.
"INTERFACE FOR FUNCTION IDOC_INPUT_ZMSG IS INCORRECT".
PLS HELP ME . THANKS IN ADVANCE.
WITH REGARDS,
SENTHIL KUMAR.RAll the IDOC processings FMs should have similar interface like this.
*" IMPORTING
*" VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*" VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*" VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*" VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*" VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*" VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*" IDOC_CONTRL STRUCTURE EDIDC
*" IDOC_DATA STRUCTURE EDIDD
*" IDOC_STATUS STRUCTURE BDIDOCSTAT
*" RETURN_VARIABLES STRUCTURE BDWFRETVAR
*" SERIALIZATION_INFO STRUCTURE BDI_SER
*" EXCEPTIONS
*" WRONG_FUNCTION_CALLED
Check if you have different one. Even if the name of variables is not as above you may get the error message .
Cheers -
Idoc serialization for custom message types
Hello,
We have a scenario where we need to serialize outbound messages where the message types are both custom and SAP standard. Can we serialize custom message types and how?Hi,
you need to create a serialization group (in customizing) and assign all the IDocs (in specific order) to this group incl. your custom IDoc.
When data is transfered first a SERDAT01 IDoc will be sent, after this your IDocs have to follow in specific order. At last again a SERDAT01 follows and triggers the processing in the destination system.
Regards,
Kai -
Assigning filter criteria for custom message type.
Hi everyone,
In our requirement i have created a custom message type ZDEBMAS like debmas. now while creating a distribution model with this message type, i need to create a filter for this.
only IDOCs of customers with Account group 0001, 0002 and 0012 has to be triggered. I'm able to create the filter with message type DEBMAS, but while i'm using message type ZDEBMAS i'm unable to create any filter. Can any help me in this.
thanks in advance,
RajniHi!
Do you create filter with BD95 and allocation with BD59 transactions? -
Distribution model. Create filters for custom message type.
Hello,
I have created a model view, and added a new message type (copy of HRMD_A). I want to add filters, but the system does not allow it. Do you know if I can only add filters to a standard message type, and not to a custom one?
Thank you,
Elena.Thanks for your answer, but I think I didn't explain my question well.
I have created a message type ZHRMD_A, and a basic type ZHRMD_A07 (both copies of HRMD_A and HRMD_A07)
I am creating the distribution model, in transaction BD64.
I created the model view.
I inserted my messsage type.
Now I want to add filters to the message type in the distribution model. When I add a standard message type, I can see under the message type the text 'No filter set'. Then I double click this text, and I can add filters. When I add the custom message type, I don't see this text, and I have no option to add filters. That's why I think I cannot add filters to a custom message type. -
Error handling using fault message type in outbound synchronous ABAP proxy
Hi,
We've a scenario, outbound synchronous ABAP proxy to synchronous SOAP receiver. The requirement is to send multiple records in a single rquest and get response for all the records sent (in the same response message).
Say if I send 10 records from ECC, I should get 10 records as response from SOAP to ECC. But the problem here is, there could be some invalid requests, for which an invalid error status code should be sent as part of response.
Source Structure
Req_Proxy
req (0..unbounded, string)
Response Structure
Resp_SOAP
Resp (0..Unbounded)
respString (0..1, String) (carries the actaul response message)
status code (0..1, String) (carries the status of the response, for ex, 001 (successful), 002 (error))
And now we are planning to make use of Fault Message Type, to track the errors from SOAP (status code 002). But, we are not sure on how to track this for all the requested records. Is it possible to track the errors for all the requested records in a singe call using fault message type? For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8 for valid and 2 for invalid accordingly.
Please calrify.
Thanks.
RohitFor eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8
for valid and 2 for invalid accordingly.
Check if you can modify the WSDL structure to include an error node that would get populated incase of invalid entries....this would mean that you get the success and failure details in the single message....also at the proxy-end make the necessary change in your DT.....may be then you do not need to use the fault message...
Regards,
Abhishek. -
How to use PO message type to output 'Form' as PDF file
Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
JoyceHi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh
Maybe you are looking for
-
Does creating a new Apple ID with user name, email and password ( for my new iPod Touch 5 CHANGE and my existing iTunes account username and pw ? Thanks....Gary [email protected]
-
IPhone 5 drops calls as fast as my confidence in Verizon
I've been a happy Verizon wireless subscriber for roughly the past 7 years. I've always had LG flip phones, and in that time have had perhaps 2 dropped calls. In July 2013, I upgraded to an Apple iPhone 5 16GB in black. As each day passes, and my iPh
-
I updated my iPhone 4s last night with iOS 6.1 update. This morning, the battery percentage has been falling at an alarming rate while in standby, and the phone seems to be heating up and staying at an elevated temperature while in standby. Has any
-
Adobe Reader 8.1.2. Internet Explorer 7 Preferences
I want to add the E-Mail Icon to the toolbar in the IE7 skin. How could I do that by group policies? Many thanks! Jonn
-
Best method to synch addy book from two computers not networked together?
I have two Macs, un-networked, and two diff. operating systems. 10.2.8 and 10.3.9. What is the best way to synch em' up on a regular basis? Thanks.