Tcode to view fico related postings for one process order

Hi Experts,
Is there any trasaction code which can be used to view all related posting into FICO for one process order
Thanks in advance.
Narayanan
Moderator: Please, search SDN

Hi,
Check In KoB1 T.code, Give Order Number and Date Range.
Thanks
Goutam

Similar Messages

  • Tcode for FICO related postings for one process order

    Hi Experts,
    Is there any Tcocde which can be used to view all related posting into FICO for one process order
    Thanks in advance
    Narayanan
    cross-post

    Hi Venkat,
    Don't know any tcode, but from se16n BSEG table u can extract document data by filling AUFNR field with process order number.
    Hope this helps
    Best regards
    Vimal

  • Show or view multiple album art for one song on iPhone 4?

    Is it possible to show or view multiple album artwork for one song on an iPhone 4, especially on the now playing screen? I figured since iTunes has this feature then the iPhone should too. Can I download an app that does this? I've searched but couldn't find any, maybe I'm using other keywords. Could anyone point me in the right direction with this?

    Darn. I hope an app is designed to be able to do this soon. From what I've seen this feature isn't really in demand so it could take a while. Thanks for replying.

  • Unable to view HCM adobe forms for one employee in sap portal

    Dear Sap Gurus,
    we are Unable to view HCM adobe forms for one employee in sap portal.
    Regards
    Srinivas

    Hi,
    What error you getting? Did the user has the authorisation? Is his system has Adobe installed?
    Please perform normal checks.

  • Automatic account postings (for Intercompany Purchase order and Sales order

    Hi all,
    I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
    I have created the master data
    Customer receiving--G001
    Sales Org.--GXIN
    Distr. Channel- 01
    Division - 00 
    Company code receiving - G1
    customer supplying- V001
    company code for supplying- V1
    2 different scenarios
    1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI  and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
    2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1.  then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
    Can this be achivable via Idoc with automatic account postings.   
    Please let me know if it doesnt make sense. thanks to all in advance
    cheers
    Jasmeet

    Hi all,
    For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
    For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
    Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
    thanks for viwing the post
    Cheers
    Jasmeet

  • VL10C double delivery notes for one sales order

    Dear all,
    Currently we encountered an very strange issue in our SAP.  we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
    does anyone have a clue on this issue? your effort and feedback will be most applicated!
    Thanks & Best Regards,
    Kyo NG

    Hi,
    I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
    Regards,
    Eduardo

  • Two deliveries required for one sales order

    Hello Friends,
    I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
    We are planning to create new shipping point with new loading group for the dangerous goods .
    Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
    Reg.

    Hi all,
    I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field.  You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
    I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
    Kind regards
    Witek Prawecki.

  • Create ecatt script for one sales order creation with multiple line items

    Hi ,
    I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
    This selection of data will be from an external file/ variants which will have only one row of data in it.
    Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
    Second: I have to create sales order for those many line items having same PO Number.
    Best Regard
    Taranum

    Hi Micky
    Firstl you should upload the Line items for a particular sales Order in an Internal table
    and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
    In case of any issues pls revert back
    Reward points if helpful
    Regards
    Hitesh

  • Should we use only one process order for each CO-product?

    Dear All,
    We have process orders.  One process order opens per day.
    Now we need to use CO-products and calculate actual cost of goods manufactured for them.
    Suppose we have 30 process orders. We have specified  Apportionment Structure in Material Master.
    Then when we create process order we  define actual Apportionment Structure in setllement rule as well.
    After we have setlled all process orders would Material Ledger/ Actual costing run consider this Apportionment Structures from all 30 process orders?
    I heard opinion from Consultant from SAP that it will not work.
    Has anyone heard anything?
    Best regards,
    Kamila.

    Hi Evgeniy,
    Thanks for response
    But we use process orders, not CO-production orders.
    We open process order each day because management wants to have information about KPI of each schift.
    We have defined in material master apportionment structure, When we create process order we define apportionment structure in settlement rule as well.
    When we settle process orders our cost distributes to finished good and CO-product according with this apportionment structure.
    But when we run ckmlcp ML/actual costing doesn't distribute raw material's price differences and Semifinished good's price differences according with this apportionment structure.
    What can we do here?
    Best regards,
    Kamila.

  • More than 3 AR for one Sales Order in relationship map

    Hello,
    i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
    SAP Version 8.81 PL 5
    Thanks a lot for any advices on this topic
    Vanessa
    Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

    Welcome to the forum.
    If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

  • One Purchase Requisition for One Maintenance Order

    Dear Consultants,
    We have implemented mySAP ECC 6.0.   We have more than 20 line items in one Maintenance order for  Item category N. Curently system is generating Purchase requisitions by line itemwise for Item category N(Non-stock items). Our client requires only one purchase requisition for every Maintenance Order. Is it possible to generate one PR for one Maintenance Order? If possible please give us the solution.
    Thanks,
    Dev

    Dear Pete Atkin,
    With your help my issue has been resolved. Thank you very much.
    With Best Regards,
    Dev

  • Two billing for one sales order for same customer

    Dear All ,
    I have a requirement of posting a two billings for one sales order.
    One is for Sales and another is for commission...
    Entry could be
    Sales Entry - Db Customer
                        Cr  Sales
    Commission entry could be
    Db - Cusomter
    Cr- Sales commission income account (P/L)
    We are having third party sales scenario , In this case billing is MIRO dependent.
    Once the miro is done then only billing is possible ...
    Could you please advise on that ..
    Regards,
    Sukh

    Dear Ratish,
    Thanks for yr reply.
    I already did that but it is not serving business purpose.
    Comm payment  - comes diff time than sales payment.
    so ,I will post one entry customer will get hit with total amount Sales + commission
    like below
    Let say 10, 000 is the sales value and 500 is the commission
    So , This entry will get posted
    Customer Db- 10,500
    Sales Cr- 10,000
    Comm Income Cr- 500
    But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
    So, We wont be knowing for which case we have or havnet received the payment against commission.
    As , Customer account is got hit with total amount( Sales+ Comm..value).
    Pls advise how to solve this.
    Regards,
    Sukh

  • How the system determines the Requirement type  for one sales order

    Hi,
    SAP-SD Gurus,
    Please tell me how the system determines the Requirement type  for one sales order?
    Thanks & Regards,
    Sreenivas.P

    Hi,
    System follows some search criterial to determine the requirement type
    1. First, an attempt is made to find a requirements type using the strategy group in the material master.
    2. If the strategy group has not been maintained, the system will determine it using the MRP group.
    3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
    4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
    5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
    6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Please check the path
    SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
    Hope it will clarify
    regards,
    santosh

  • Two invoices for one sales order

    I want to create two invoices for one sales order
    Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
    I would say 10% of 100 $
    And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
    Both invoices will be relevant of accounting.
    Would any body suggest this, how it would be mapped it in to SAP.

    Hi Suresh,
    It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
    Go to IMG-SD-Billing-Billing plan.   Do ur own configuration for Billing plan.
    Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
    If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
    Hope this wld help U.
    Regards,
    Praveen

  • Two  outbound Delivery for one sales order

    Hi Experts
    I am an Abaper and i have to find the root couse of this problem
    problem is  two outbound delivery getting generated for one sales order with same no of quantity
    Now i am unable to find the approch what can be root cause of this problem , I checked the details of these deliveries these are created by some job , but even in job history any positive solution comeout,
    please suggest me what are other ways or causes of this problem

    Hi there,
    Delivery split will be there is the header data in shipping is different.
    For eg of shipping points, delivery dates, ship-to etc are different.
    Apart from this in the copy control routines at the headerlevel from OR to LF in VTLA, there might be some customized code written to split the deliveries. Possible conditions could be items from different warehouses / storage locs or if the quantity is more, then a delivery split.
    Pls check if there is any customised code written in copy control routines in VOFM.
    Regards,
    Sivanand

Maybe you are looking for

  • Adobe Bridge overrides Windows Explorer functions?

    Since installing Adobe Bridge CS3, I am unable to rename/copy/move folders within Windows explorer...If I want to do it, I have to use Bridge. This is particularly annoying when new folders have to be renamed/copied/moved within OTHER programs. Examp

  • My Mac mini keeps freezing and there is no display

    Hi every Macmini users; The model Of my Mac Mini is 1.66GHz core2, With default Hardwere. Around last week while i was working with it, It Froze Imidiatly and i didn`t have display. I have this problem until now. when i restart it i should stay for a

  • How to find out where I have used a certain Global/Local Variable

    Hi Friends I want to track how and where the shared variable's  value has been changed/Read when I try to debug the program. Anyone here had the expenrience on how to find a certain shared variable in the Block Diagrams/VIs. I will very appreciate yo

  • I Know, this is stupid, but how do I add a scanner?

    I'm a new convert to Apple. Please be gentle. I knew how to add peripherals with Windows, but I feel like a child now with this iMac. I just need to "add hardware." Am I missing something? I just want to add a scanner...

  • Why are entries into iCal not synching with my droid phone?

    When I enter calendar events into my Motorola Droid phone (Gmail), the entries automatically synch to my Macbook Pro Gmail and from there to iCal.  But when I make an entry into iCal, though the entry appears on the Macbook Pro Gmail, the entry does