Tcode to view total demand

Hi All,
I need a tcode to list all the demands(independent requirements and dependent requirements) and the stocks for a list of materials.
I found that tcode MD79 is capable of listing the ind. req. for a list of materials. Same way MD07 for listing the stocks.
Is it possible to view the dep.req. for a list of materials? Or is there any tcode to view all these in a single transaction?
Arun

Hi,
You may use using MD04 - Stock requirement list. to display depend demand. In this you need to define your selection rule to display specific element in MD04. Then on MD04 screen, click on Filter --> assign required selection rule required so that only required elements (Dep Demand) will be displayed
You may define selection rule to define PIR, Stock as well as Dep. Demand at atime
Alternatively try Planning table to display required contents.
If doenot solve your requirement, you may have to look for some simple custom report using existing Function Modules
Thanks,
Mangesh. A. Kulkarni

Similar Messages

Forecast horizon values are not being considered in Total demand row

Hello Experts,
We are in SCM 4.1 Version.
I have a question regarding Forecast horizon consderation in Planning book.
We have a weekly data view In our Planning book,and in that planning data view "Total demand" row is not calculating correctly for the products with Forecast horizon .
The entire Forecast is counted in Total demand without considering forecast horizon value for that Product.
But this is working fine for Daily data view.
I have also noticed that, Total demand values are calculating correcly in weekly view ( Forecast horizon value from the Product master is taken into account ) only when the Forecast horizon value crossing that week bucket.(i.e >7 days).
But usually we will have a Forecast horizon value of 3 days for all our products,.
What should we do to get the Total demand values correctly?
Thanks in advance..
SAPLOUIS.
Edited by: saplouis on Dec 5, 2010 6:42 AM

Check the macros on data view
Regards
Aban

Total Demand not getting calculated in Plg book 9ASNP94 -DATA VEW SNP94(1)

1. I am using the std planning book      9ASNP94 AND DATA VEW SNP94(1)/
2. i have maintained all the below master data
     1. Location.
     2. Product.
     3. PPm
     4. IM for planned order
     5. IM for sales order
3. Now i have sent sales order as demnand for the Planning book
4. Sales order is getting displayed in the sales order row.
5. The macro for toltal demand is working fine in the macro test,
Issue
1. Total demand is not getting calculated, eventhough i have sales order qty of 1000 it is showing nothing in the total demand.
2. since total demand is zero my stock on hand is also zero.
3. I need to run location heuristic to genearate SNP planned order.
kindly let me know how to address this issue !
reg
dsk
Edited by: Dhandapani Satheeshkumar on Dec 10, 2009 5:17 PM

Hi ,
can you plz go to the standard planning books - data views macro book .
i.e open the macro workbench and then go to the macro workbook for SNP94(1) data view.
open the macro book
See in the default macro list that all three default macros( shown in the top right hand side ) are added and also all macros in the macro book are either green or yellow. if they are red then generate them again .
if three default macros are not in the defalut list then include them ..save and exit .
Now check in the planning book if it works ?
if not let me know ? which version r u working on ? is this the first time you are seeing data in the planning book?
Thanks
Debsankar Das

Tcode to view the list of all dialog users in SAP XI

Dear all,
What is the Tcode to view the list of all dialog user is SAP XI system.
I checked with SU01, it doesn't have a option to display the list of existing users.
Any other Tcode for this purpose.
Regards,
Younus

Hi..
T-code AL08 -> list all logged users(user login logon)
Regards..
krishna..

Tcode to view/change Structures

Hi,
I need to add new fields to VA05. OSS Note 350068 intructs to change Table VBMTV. However, the system generates error message "VBMTV is a structure, not a table" when I tried viewing from SE16.
What is the tcode to view change Structures?
Thanks!

VBMTV is a structure and not a table. In SE11 select radio button Data type and enter VBMTV in corresponding fields and click on display to view the contents of the structure.
Regards,
GSL.

Viewing total duration for multiple audio files

I need to be able to view 'total duration', when selecting multiple audio files, e.g. 10 audio files, total duration 42.03. I can't find a way to do this and so far, all I've been able to do is view individual audio file durations, then total them manually (which takes far too long, for what I need to do). I've previously been a Windows user, and this is instantly viewable in Explorer.
I'm new to OS X, and really need to be able to do this for my job. Can anyone help??
Thanks in advance, Marc

Here's an image to explain better:
http://img216.imageshack.us/img216/3241/playlisttotaltime.jpg
However the total time isn't 100% accurate, because I believe iTunes is adding some extra seconds for the gaps in between songs.

Change Total Demand KF in SNP by material

Hello All:
I have a requirement where the request is to have just forecast and dep. demand to be part of Total demand KF in SNP. Also this will not have any forecast consumption. The above request is material specific and we will still use the standard Total demand for other materials.
Appreciate your thoughts and time.
Sayeed

All:
Need your advice, will it be a good idea to have a custom field in product master to control the level of calculation by macro (stock balance). The proposal is to have fixed values in the custom field i.e. "0" for Total demand (no change- consider all types of demand which it currently has), "1" for considering only Forecast and dep. demand in Total demand, calling this custom filed in the macro to do the appropriate calculation.
Appreciate your thoughts. I am trying to avoid creating a new planning book at this time.
Thank you
Sayeed

What is the tcode to view form RVINVOICE01

what is the tcode to view form RVINVOICE01.. Can anyone tell

Hi
Goto SE71
Enter this form
then you can see
sometimes it may not be availbale in that client
try to copy it from the client 000 to this client
from the Menu Utilitites-> copy from client (enter 000) and copy
it will come
then you can't change this as it is, so you have to copy this
first in SE71 , enter ZSCRIPT name and create this and save.
then PRESS CHANGE..
from menu FORM -> copy from enter this RVINVOICE01 and Lang as EN
then this std form will be copied to your ZSCRIPT form.
Now change this Zscript as per your requirement
and finally attach this in NACE tcode against Application V3, output type RD00
in the VF02 Transaction You have to configure the output type for invoice with RD00 with medium, partner and lang
then save
to see the FORM OUTPUT
from VF02 enter one invoice number
from menu ISSUE OUTPUT To Printer/Screen
select screen it will show the preview on screen
to print select the printer and get it printed
<b>Reward points for useful Answers</b>
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Tcode to view payroll results....

what is the Tcode to view payroll results(RT n CRT).

Hi,
Try this TCODE: S_AHR_61015890.
Or, you can search other TCODE here:
1. Goto SAP MENU
2. Select Human Resources.
3. Select Payroll
4. Select Your Nation
5. Select Info System
6. Subenu in here different for each country.
After that you can select any TCode that you need.
Notes:
<i>Each Nation/Country has different TCODE.
S_AHR_61015890 for Indonesia
S_AHR_61015969 for Malaysia
PC00_M40_ANN for INDIA</i>
Regards,

TCODE TO VIEW THE CANCELLED PRODUCTION ORDER

Write me the TCode to view the Production Orders whose confirmations have been cancelled by using TCode co13

Dear,
Use T code COOIS - Production Order information system
and select the systems status as cancelled & execute it for a plant.
Regards
Mangal

TCODE TO VIEW THE CANCELLED PROCESS ORDER

Write me the TCode to view the Process Orders whose confirmations have been cancelled by using TCode CORS

Hi
You can use COIO and give the standard profile 000001
and sys status canc and execute.
You can also use the report COID .
Choose order headers and followthe above procedure.
COID will be helpful for other reports and you can explore
Regards
Ranga

Need Tcode for viewing payroll results

what is the Tcode to view payroll results(RT n CRT).

Report RPCEDTx0 prints out payroll results (x=country indicators).
use t-code PT66 to display the cluster details that is results table
reward

Why calculated column never display on "View - Total" selection

In SP 2010 Foundation list, I have a calculated column called "COMP TOTAL".
But why calculated column never display on "View -> Total" selection? In this case any work around for me to display out summation of a calculated field?

check this
http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/04/24/how-to-total-calculated-columns-in-a-sharepoint-list.aspx
https://www.nothingbutsharepoint.com/sites/eusp/pages/sharepoint-displayinig-calculated-column-sums-in-a-view-screencast.aspx

Prevent user from the view on demand connection in the desinger but not XI

When I give an user/group view on demand access to a connection (universe connection), they can refresh the webi report sucessfully. But this also opens up the connection in the designer for the user/group. This might allow them to build additional universe based on various tables the connection may have access to.
How do I prevent an user seeing/using the view on demand connection in the desinger?

HI
Can we try this?
Open java administration launchpad.
Select Business Objects enterprise Applications.
Select "Designer"
It will show the rights for the group\user, place the cursor and click advanced under "net access"
The advanced right windows open expand "Designer" and find Create,Modify,Or delete connections
Set the right to "Explicitly denied" .Apply ok
The new and edit buttons will now be grayed out for the particular user\group.
Hope this will help
Regards
Kultar

How do I view total song count in iTunes 11? Previous versions listed total song counts at the bottom.

Does anyone know how I can view my total song count in my library in iTunes 11? All previous versions listed the total song count in my library at the bottom. Thanks for the help!

It sounds like the staus bar is turned off. Select view from the menu bar and enable the staus bar.

Tcode to view total demand

Similar Messages

Maybe you are looking for