Tcode to write data to Infocube manually

Hello Gurus,
Is there a transaction code to write data to the Transaction Infocube manually. I have done that earlier, but dont remember the Tcode now. Any help is highly appreciated.
thanks in advance
Full points to correct answers

Hi,
Check the T.code RSINPUT.
Regards,
Yokesh

Similar Messages

What's the FUNCTION to write datas an Infocube?

Hello guys,
I would like to upload datas in an Infocube directly by ABAP PROGRAM.
Do you know what is the Function to upload the datas in an Infocube?
Thanks,
Carlos Eduardo

Hi,
Try to execute the below program. You will get options to enter the data directly to cube.
CUBE_SAMPLE_CREATE
Vivek

How to write data in the Infocube using BI IP input ready functionality

Hi All,
Please help me in the following scenario...
Input given to me is-- ZCUBSDID cube with associated role ZSP_BW_SAI_BUDGETS-DID_ALL.
Query is ZR_V7_CO_PA_CH_PB_DID_BUDGET_2 based on agregation level ZALBSDID (& ZALBVDID) in infoarea ZDACOPA.
I have to write data in the cube by using Input-Ready functionality of BI IP. Can you please provide me step by step procedure for writing the data in the cube as i am very new in IP side.
Also if any further input required just let me know.
My Analysis-> I checked that cube is in Planning mode and in Query Designer>Property Pane-->Planning Pane, Query is in Change mode and also associated Keyfigures are in Input-Ready enabled.
Also i am able to access query in Analyzer.
This is very critical for me and need to provide solution asap. Please update asap. It really be great help.
Thanks & Regards
Rupali Singh

Hi,
To enter data in to planning cube through manual planning, you can do the following,
1. In a query that is used for manual planning, a cell is only input ready if each characteristic value of all the characteristics included in the aggregation level is unique. None of the aggregated values on the aggregation level are therefore input ready: Totals, subtotals and inner hierarchy nodes are not input ready.
2. To be able to change values for calculated key figures (like Average Price as a quotient of Amount and Quantity), these must be based on input-ready formulas, and at least one operand must be input ready. More information: Defining Inverse Formulas (Designtime) and Inverse Formulas (Runtime).
3. In order to change aggregated values (with respect to the aggregation level), these values must be disaggregated on all the data records that contribute to the aggregated value of the cell. More information: Disaggregation (Top-Down-Distribution).
4. If a query used for manual planning includes a navigation attribute that is restricted using a fixed or dynamic filter or a restricted key figure, the system treats the navigation attribute as a normal characteristic. The rule under point 1 applies here. The system only reacts as though the navigation attribute were not part of the query if the navigation attribute is not restricted.
5. In a query defined on a MultiProvider or a complex aggregation level that you want to use manual planning for, a cell is not input ready if the InfoProvider that is defined by this cell is:
a. Not a real-time InfoCube
b. A real-time InfoCube that has been switched to load mode
6. If an input-ready query is executed in change mode, but the requested data is locked by another user, the query starts in display mode.
For more details, you can refer to the following link,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Hope this helps you to solve your issue.
Regards,
Balajee

Hp-mkuri can't find support-type; hp can't write data; I can't print

At work, I use an HP LaserJet 1320 over USB. This was working great - and with no particular fiddling needed to get it to work. However, I've started having some problems. I had some issues last Saturday but I thought it was a blip because it apparently randomly got over them and printed just fine. Today, however, I tried to print a 20 page PDF document using lp <filename> from the command line. The response of the printer was to repeatedly flash an orange warning light. The printer status just showed "Processing..." Three and a half hours later, the light was still going and the status was still "Processing...". Examining running processes, the lp process was running and so was pdftops. That is, hours later, it had still apparently not finished converting PDF to PS.
The log files under cups don't show anything terribly interesting except that page_log contains:
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:28 +0100] 1 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:29 +0100] 2 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:31 +0100] 3 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:32 +0100] 4 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:34 +0100] 5 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:36 +0100] 6 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:37 +0100] 7 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:39 +0100] 8 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:40 +0100] 9 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:42 +0100] 10 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:43 +0100] 11 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:45 +0100] 12 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:46 +0100] 13 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:48 +0100] 14 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:50 +0100] 15 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:51 +0100] 16 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:53 +0100] 17 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:54 +0100] 18 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:56 +0100] 19 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
hp-LaserJet-1320-series user 259 [04/Apr/2012:16:38:57 +0100] 20 1 - localhost stocker-vap.pdf A4 two-sided-long-edge
There are no errors reported at this time in the cups error log. The last entry is:
E [04/Apr/2012:15:14:08 +0100] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address.
There's a good chance that the system didn't have access to any printer at the time (except cups-pdf). I wasn't printing and I don't usually turn the printer on or connect it until I need it.
access_log (I tried fiddling a little, turning the thing off, reinstalling the toner, blessing the paper...):
localhost - - [04/Apr/2012:15:18:16 +0100] "POST / HTTP/1.1" 200 340 Create-Printer-Subscription successful-ok
localhost - - [04/Apr/2012:16:36:03 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok
localhost - root [04/Apr/2012:16:36:04 +0100] "POST / HTTP/1.1" 200 1343 CUPS-Get-Devices -
localhost - - [04/Apr/2012:16:36:05 +0100] "POST /admin/ HTTP/1.1" 401 143 Resume-Printer successful-ok
localhost - root [04/Apr/2012:16:36:05 +0100] "POST /admin/ HTTP/1.1" 200 143 Resume-Printer successful-ok
localhost - - [04/Apr/2012:16:36:05 +0100] "POST /admin/ HTTP/1.1" 401 143 Resume-Printer successful-ok
localhost - root [04/Apr/2012:16:36:05 +0100] "POST /admin/ HTTP/1.1" 200 143 Resume-Printer successful-ok
localhost - - [04/Apr/2012:16:36:19 +0100] "POST /printers/hp-LaserJet-1320-series HTTP/1.1" 200 412 Create-Job successful-ok
localhost - - [04/Apr/2012:16:36:19 +0100] "POST /printers/hp-LaserJet-1320-series HTTP/1.1" 200 1622566 Send-Document successful-ok
localhost - - [04/Apr/2012:16:41:14 +0100] "POST /admin/ HTTP/1.1" 401 192 Pause-Printer successful-ok
localhost - root [04/Apr/2012:16:41:14 +0100] "POST /admin/ HTTP/1.1" 200 192 Pause-Printer successful-ok
localhost - - [04/Apr/2012:16:41:14 +0100] "POST /admin/ HTTP/1.1" 401 192 Pause-Printer successful-ok
localhost - root [04/Apr/2012:16:41:14 +0100] "POST /admin/ HTTP/1.1" 200 192 Pause-Printer successful-ok
localhost - - [04/Apr/2012:16:41:25 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok
localhost - root [04/Apr/2012:16:41:25 +0100] "POST / HTTP/1.1" 200 479 CUPS-Get-Devices -
localhost - - [04/Apr/2012:16:42:53 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok
localhost - root [04/Apr/2012:16:42:53 +0100] "POST / HTTP/1.1" 200 1343 CUPS-Get-Devices -
localhost - - [04/Apr/2012:16:42:53 +0100] "POST /admin/ HTTP/1.1" 401 143 Resume-Printer successful-ok
localhost - root [04/Apr/2012:16:42:53 +0100] "POST /admin/ HTTP/1.1" 200 143 Resume-Printer successful-ok
localhost - - [04/Apr/2012:16:42:53 +0100] "POST /admin/ HTTP/1.1" 401 143 Resume-Printer successful-ok
localhost - root [04/Apr/2012:16:42:53 +0100] "POST /admin/ HTTP/1.1" 200 143 Resume-Printer successful-ok
localhost - - [04/Apr/2012:16:43:49 +0100] "POST /printers/hp-LaserJet-1320-series HTTP/1.1" 200 412 Create-Job successful-ok
localhost - - [04/Apr/2012:16:43:49 +0100] "POST /printers/hp-LaserJet-1320-series HTTP/1.1" 200 1622566 Send-Document successful-ok
localhost - - [04/Apr/2012:20:16:17 +0100] "POST /admin/ HTTP/1.1" 401 192 Pause-Printer successful-ok
localhost - root [04/Apr/2012:20:16:17 +0100] "POST /admin/ HTTP/1.1" 200 192 Pause-Printer successful-ok
localhost - - [04/Apr/2012:20:16:17 +0100] "POST /admin/ HTTP/1.1" 401 192 Pause-Printer successful-ok
localhost - root [04/Apr/2012:20:16:17 +0100] "POST /admin/ HTTP/1.1" 200 192 Pause-Printer successful-ok
In /var/log itself, I found a whole bunch of errors in errors.log. This is a representative sample:
Apr 4 16:36:00 localhost udevd[4704]: missing file parameter for attr
Apr 4 16:36:02 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.da
t
Apr 4 16:37:13 localhost hp[8127]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 secon
d io timeout
Apr 4 16:37:58 localhost hp[8127]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 secon
d io timeout
Apr 4 16:41:23 localhost udevd[4704]: missing file parameter for attr
Apr 4 16:41:24 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.da
t
Apr 4 16:41:27 localhost udev-configure-printer: no corresponding CUPS device found
Apr 4 16:42:52 localhost udevd[4704]: missing file parameter for attr
Apr 4 16:42:52 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.da
t
Apr 4 16:44:42 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
Apr 4 16:45:27 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
Apr 4 16:46:12 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
Apr 4 16:46:57 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
Apr 4 16:47:42 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
Apr 4 16:48:27 localhost hp[11104]: io/hpmud/musb.c 1420: unable to write data hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324: 45 seco
nd io timeout
The last type of message fills a good many more lines. Some of the non-finding-device errors earlier are from me connecting and disconnecting the printer etc. I think. i.e. they are not why it isn't working.
From user.log:
Apr 4 14:23:58 localhost mtp-probe: checking bus 2, device 8: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1"
Apr 4 14:23:58 localhost mtp-probe: bus: 2, device: 8 was not an MTP device
Apr 4 15:27:18 localhost mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1"
Apr 4 15:27:18 localhost mtp-probe: bus: 2, device: 4 was not an MTP device
Apr 4 16:36:01 localhost mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
Apr 4 16:36:01 localhost mtp-probe: bus: 1, device: 4 was not an MTP device
Apr 4 16:36:01 localhost logger: loading hp_printer_device 001 004
Apr 4 16:36:02 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.dat
Apr 4 16:36:05 localhost hp-check-plugin: [8068]: error: hp-systray must be running.
Run 'hp-systray &' in a terminal.
Apr 4 16:36:05 localhost hp-check-plugin: [8068]: error: Run hp-systray manually and re-plugin printer
Apr 4 16:41:23 localhost mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
Apr 4 16:41:23 localhost mtp-probe: bus: 1, device: 5 was not an MTP device
Apr 4 16:41:24 localhost logger: loading hp_printer_device 001 005
Apr 4 16:41:24 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.dat
Apr 4 16:41:24 localhost hp-check-plugin: [10933]: error: hp-systray must be running.
Run 'hp-systray &' in a terminal.
Apr 4 16:41:24 localhost hp-check-plugin: [10933]: error: Run hp-systray manually and re-plugin printer
Apr 4 16:42:52 localhost mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
Apr 4 16:42:52 localhost mtp-probe: bus: 1, device: 6 was not an MTP device
Apr 4 16:42:52 localhost logger: loading hp_printer_device 001 006
Apr 4 16:42:52 localhost hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.dat
Apr 4 16:42:52 localhost hp-check-plugin: [11017]: error: hp-systray must be running.
Run 'hp-systray &' in a terminal.
Apr 4 16:42:52 localhost hp-check-plugin: [11017]: error: Run hp-systray manually and re-plugin printer
I'm a bit confused by this. I don't usually use hp-systray (that I know of). That's the great thing about this printer - I just configured it all through the cups web interface with no need to use hp's printer setup tools or to install any plugin - it didn't need one. But hp/hplip_ac.log says:
[11017]: info: :hp-systray is not running.
error: hp-systray must be running.
Run 'hp-systray &' in a terminal.
[11017]: info: :Device Plugin is not found
error: Run hp-systray manually and re-plugin printer
[11017]: info: :
[11017]: info: :Done.
And lpr.log:
Apr 4 16:36:02 localhost udev-configure-printer: add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0
Apr 4 16:36:02 localhost udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 16:36:02 localhost udev-configure-printer: Device vendor/product is 03F0:1D17
Apr 4 16:36:02 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:hp LaserJet 1320 series SERN:- serial:00CNM1J04324
Apr 4 16:36:05 localhost udev-configure-printer: SERN field matches USB serial number
Apr 4 16:36:05 localhost udev-configure-printer: URI match: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324
Apr 4 16:36:05 localhost udev-configure-printer: URI contains USB serial number
Apr 4 16:36:05 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of print queue: cups-pdf:/, normalized: cups pdf
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of print queue: dnssd://Dell%202330dn%20CFR._printer._tcp.local/, normalized: dnssd dell 2330dn cfr printer tcp local
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of print queue: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:36:05 localhost udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:36:05 localhost udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series
Apr 4 16:36:05 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3005?serial=CNFW6D5578, normalized: laserjet p3005 serial cnfw6d5578
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3010_Series?serial=VNBQC2323J, normalized: laserjet p3010 series serial vnbqc2323j
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:36:05 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: remove /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 16:41:14 localhost udev-configure-printer: URI of print queue: cups-pdf:/, normalized: cups pdf
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of print queue: dnssd://Dell%202330dn%20CFR._printer._tcp.local/, normalized: dnssd dell 2330dn cfr printer tcp local
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of print queue: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:41:14 localhost udev-configure-printer: Disabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series as the corresponding device was unplugged or turned off
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:41:14 localhost udev-configure-printer: Disabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series as the corresponding device was unplugged or turned off
Apr 4 16:41:14 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3005?serial=CNFW6D5578, normalized: laserjet p3005 serial cnfw6d5578
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3010_Series?serial=VNBQC2323J, normalized: laserjet p3010 series serial vnbqc2323j
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:14 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:41:24 localhost udev-configure-printer: add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0
Apr 4 16:41:24 localhost udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 16:41:24 localhost udev-configure-printer: Device vendor/product is 03F0:1D17
Apr 4 16:41:24 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:hp LaserJet 1320 series SERN:- serial:00CNM1J04324
Apr 4 16:41:27 localhost udev-configure-printer: no corresponding CUPS device found
Apr 4 16:41:38 localhost udev-configure-printer: remove /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 16:42:52 localhost udev-configure-printer: add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0
Apr 4 16:42:52 localhost udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 16:42:52 localhost udev-configure-printer: Device vendor/product is 03F0:1D17
Apr 4 16:42:52 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:hp LaserJet 1320 series SERN:- serial:00CNM1J04324
Apr 4 16:42:53 localhost udev-configure-printer: URI contains USB serial number
Apr 4 16:42:53 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324
Apr 4 16:42:53 localhost udev-configure-printer: SERN field matches USB serial number
Apr 4 16:42:53 localhost udev-configure-printer: URI match: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of print queue: cups-pdf:/, normalized: cups pdf
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of print queue: dnssd://Dell%202330dn%20CFR._printer._tcp.local/, normalized: dnssd dell 2330dn cfr printer tcp local
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of print queue: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:42:53 localhost udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 16:42:53 localhost udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series
Apr 4 16:42:53 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3005?serial=CNFW6D5578, normalized: laserjet p3005 serial cnfw6d5578
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3010_Series?serial=VNBQC2323J, normalized: laserjet p3010 series serial vnbqc2323j
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 16:42:53 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: remove /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1
Apr 4 20:16:17 localhost udev-configure-printer: URI of print queue: cups-pdf:/, normalized: cups pdf
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of print queue: dnssd://Dell%202330dn%20CFR._printer._tcp.local/, normalized: dnssd dell 2330dn cfr printer tcp local
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of print queue: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 20:16:17 localhost udev-configure-printer: Disabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series as the corresponding device was unplugged or turned off
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: Queue ipp://localhost:631/printers/hp-LaserJet-1320-series has matching device URI
Apr 4 20:16:17 localhost udev-configure-printer: Disabled printer ipp://localhost:631/printers/hp-LaserJet-1320-series as the corresponding device was unplugged or turned off
Apr 4 20:16:17 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3005?serial=CNFW6D5578, normalized: laserjet p3005 serial cnfw6d5578
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_P3010_Series?serial=VNBQC2323J, normalized: laserjet p3010 series serial vnbqc2323j
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201320%20series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Apr 4 20:16:17 localhost udev-configure-printer: URI of detected printer: hp:/usb/hp_LaserJet_1320_series?serial=00CNM1J04324, normalized: laserjet 1320 series serial 00cnm1j04324
Could anyone advise me? I tried searching the forums but although I can find posts on issues similar to other printing problems I've had, I can't find any which look quite like this.

I've figured out that this is happening only with certain pdf documents but I'm not sure why. (None contain pictures or diagrams or anything like that.)
Printing a different pdf today, the behaviour is still very strange, though. Basically, I printed a 120 page pdf. Initially, it printed a bit. As far as the computer was concerned, the job was successfully completed. The printer flashed its lights. I pressed a button and it completed the first 56 pages. I then sent 57-120 to the printer. Again, it printed 57-something and then, again, nothing. Job done as far as the computer was concerned. Flashing lights on the printer. In the end, it took 4 or 5 jobs to finish the document.
What's odd about this is that I usually have no problems at all with this printer and this isn't the first time I've sent it a large document.
It is almost as though the computer sends stuff too fast or something for the printer or sends more than the printer can cope with at once. So when it has finished that bit, it waits for the next bit but the computer thinks it has sent the lot and no more is sent. I don't know if that is possible but that's what it "looks" like!

Write data to multiple text files after specific size

Hello,
I wrote a code that contineously writes data to a text file. The problem is I am running this VI for long time and therefore this text file is being bigger in size e.g. more than 10MB. I want to split writing data in this text file after max 1MB size. Can anyone help ????
thanks in advance.

CMW.. wrote:
You could use the "File/Directory Info Function" in the Advanced File VIs and Function palette to check the size. If the file is too big. close it and create a new one.
I would use the Get File Position since this won't cause Windows to have to do so much. Assuming you are just writing and not setting the file position manually, this will return the size of the file in bytes (file position will always be at the end of the file).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Navigational Attribute, no data in infocube.

Dear all,
I want to have navigational attribute for my infoobject 0orgunit which is an attribute of ZCREATOR. Here are the things which I have already done.
1.     In my infocube, I have navigational attribute checked under characteristics.
2.     In my infoobject ZCREATOR, I have navigational attribute as type NAV and not DIS under the attributes tab.
3.     Query again the master data and have manually run the attribute change run.
ohya, ZCREATOR is a reference characteristic of 0BPARTNER.
Anyway, in the infocube, when I load my data, the blue column which represents navigational attribute is empty. Is there something Im doing wrong? Please advice and thanks in advance.

1. how do i populate the blue column in the infocube then? whats the use of it when no daa will get populate.
You cant populate unless you derive the values in the update rules/transformations. The advantage of using nav attributes, is not to derive values on the cube level but will be able to use it on query level. If there will be a change in the masterdata, you need not go back to realign the data inthe cube if u r using nav attribute, as it would always read from the updated master data table.
2. in my query, i am using this charcteristics ZCREATOR__0ORGUNIT do display my navigational attribute, but still no data is available. its display empty field in the column.
a few checks:
is the nav attrribute available as a char in the query designer?
if so, when you expand the char, and click on the values - do u see any values?
if not the master data is not available.

How to read/write data in Notepad?

Hi to all,
Im creating a simple application to write data in notepad using wireless toolkit 2.5. For that i have created a notepad file(raj.txt) manually and saved in the location "D:\WTK25\appdb\DefaultColorPhone\filesystem\root1\raja.txt". When i run in the emulator..Its shows the following exception " java.io.IOException : Root is not accessible". I got struck in this thing. For your convenience i have attached my source code also. Please correct and explain me
1. Where should i store the notepad file in Wireless Toolkit 2.5?
2. If i use wireless toolkit 2.5, What is the link should i give in the method Connector.open("file:///???")?
My source code:
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.io.*;
import javax.microedition.io.*;
public class FileConnection extends MIDlet implements CommandListener
private Display display;
private Form form;
Thread s=new Thread();
public FileConnection ()
display = Display.getDisplay(this);
form = new Form("Write To File");
form.setCommandListener(this);
public void startApp() throws MIDletStateChangeException
try
OutputConnection connection = (OutputConnection)
Connector.open("file://localhost/D:/WTK25/appdb/DefaultColorPhone/filesystem/root1/raj.txt", Connector.WRITE );
OutputStream out = connection.openOutputStream();
PrintStream output = new PrintStream( out );
output.println( "This is a test." );
out.close();
connection.close();
Alert alert = new Alert("Completed", "Data Written", null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
catch( ConnectionNotFoundException error )
Alert alert = new Alert("Error", "Cannot access file.", null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
catch( IOException error )
Alert alert = new Alert("Error", error.toString(), null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
public void pauseApp() {}
public void destroyApp(boolean unconditional) {}
public void commandAction(Command command, Displayable displayable) {}
}

Kindly read the below mentioned article links. You'll understand what is going wrong in your present implementation.
http://developers.sun.com/techtopics/mobility/apis/articles/fileconnection/
http://today.java.net/pub/a/today/2007/03/29/working-with-java-me-fileconnection-on-physical-devices.html
~Mohan

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

How to write data from Basic Cube to Transactional Cube

Hi experts,
My problem is the following: I have a Transactional Infocube (IC1) and a basic Infocube (IC2). They have both the same structure. IC2 is loaded with data and other data is keyed in IC1.
I would like to write data from IC2 to IC1 and eliminate data redundancy if there can be some.
Can anyone tell me how I can do that?
Thanks in advance

Hi,
Yes , you have to create a multiplanning area ..
In the planning level , filter the value which you want to copy from basic to transactional cube .
Fields to be changed : Planning area and others as per your need..
Field for condition : if you want to copy data from 2006 then give calyear as field for condition.
Parameter group : give the value 'from' as basic cube 'to' as your transactional cube ..

BW Statistics: Deleting Data from InfoCubes.

Hi,
I want to see data in BW Statistics: Deleting Data from InfoCubes.
I am working on BI 7.
I have set the infoprovider in Tcode RSDDSTAT.Marked 2 Infocube statistics ( X) and OLAP(2).
Already activated the BI Statistics.
I am deleting data from one of the cube . But when I go to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes)
It is not showing any data .
I can't see any data in RSDDSTATDELE table also
Do I need to do any other setting ? Am I missing any steps?
I need to dislay the log for deleted request /deleted data ?
I need to display the log for deleted infoobject/infopackage also? Where can i get this ?
Pls guide .
Regards
Nilesh

Hi Venkat,
I can not able to see in the report also . I have tried 0BWTC_C10/0BWTC_C10_Q251 to 254.
Whenever I am doing to delete it individullay it goes to table SDDSTATDELE .But whenever I am deleting whole data from cube or request ID it is not updating table RSDDSTATDELE.( which is further used to get data )
I got this from SAP help .
The characteristic can have the following characteristic values C,N,D and T:
C (Choose): The system automatically chooses the best delete mode. This is N or D.
N (Create New): If over 10% of an InfoCubes data records are to be deleted, the system replaces the InfoCube fact table with a table with data records that are not to be deleted.
If you want to delete more than 10% of the records, the system creates a new table, copies the data records you want to keep to the new table, deletes the old table and then renames the new table.
D (Delete): If you want to delete less than 10% of the data records, the system deletes these individual records directly from the InfoCube fact table.
T (Truncate): If you want to delete all data records, the system deletes all data records from the tables, but retains the tables in the database.
So how to see these records? I am doing full upload to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes).
Before this do I need to extract data for other CUBE also.
Pls suggest .
Regards
Nilesh

Write Data storage VI performance issue

I have a program that logs data from mulitple channels. It waits for 500 points from each channel, then saves the data (as a raw 2D DBL array) to file, wait for another 500 points, saves and so on. At the end, I have a raw file. I created a utility VI that would take the raw file and converts it to a tdm file so I can read it in Diadem. The utility VI has a for loop. In each iteration, the loop reads one data segment (the 500-point 2D array), converts the channel data to waveforms and then writes/appends to a tdm file using the Write Data (Channel) storage VI. The VI works fine for small files. But as the file gets larger, the conversion time seems to increase exponentially. Eventually grinding to a halt.
I noticed that each iteration of the for loop seems to take longer and longer. So I suspect the Write Data VI may not be simply appending to the existing channel data. But instead, each time it's probably reading back the waveform data already saved, recombine them with the new data and then rewrite the entire file. This is just a guess.
Anyway, I really need some help resolving the performance issue. Any response will be appreciated. The conversion VI is attached.
S.
LabView 8.0
Message Edited by Seaman008 on 06-01-2007 01:50 PM
Attachments:
Convert2.vi ‏184 KB

Here are two profile captures. Each capture start at the first entry into the inner-most for loop and stop when it exited the loop. Profile2.txt was captured when processing a RAW input file twice the size as in Profile.txt. I'm not familiar with the VIs listed, but it shows that lot of time was spent in _saveDdtAttributes.vi and _saveDDT.vi.
Attachments:
profile.txt ‏131 KB
profile2.txt ‏132 KB

How many channels can I write in a same file with the Write Data Module (Dasylab 12.00.00) ?

I would like to write data from a large number of channel (up to 128) in a same file. Using the write data module, I have up to 16 channels only ! The only solution I found is to save data in 8 different files... Is there any solution to solve this problem ? I use DASYLAB V.12.00.00. Thank you
Solved!
Go to Solution.

Please see this knowledge base article describing how to do it.
http://kb.mccdaq.com/KnowledgebaseArticle50372.aspx?Keywords=multiplex
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Read multiple files and write data on a single file in java

Hello,
I am facing difficulty that I want to read multiple files in java and write their data to a single file. Means Write data in one file from multiple files in java
Please help me out.
Naveed.

algorithm should be something like:
File uniqueFile = new File();
for (File f : manyFilesToRead)
while (readingF)
write(dataFromF, intoUniqueFile);

How to write data in a real-cube from a internal table

Hello Friends
as you know, we can load data into cube by data sourc, transform rules. But now, i want write data into a real-time cube from a interinal table .
I want to know how can I do it.
thanks !

Not possible as there shd be some interface or connectivity shd be there to laod the data..
possible ways are download to excel using FM GUI_download and use that one as a DS...

Tcode to write data to Infocube manually

Similar Messages

Maybe you are looking for