TCode VT02n need to papulate mat.description in std. report

Hi,
Tcode Vt02n:
Give shipment no and press enter, from menu GOTO--> Shipment and Deliveries populates report with split deleveries button.. etc,
when place cursor on deliveri no and press split button will populate report, In this report, Material description is not poulating, I want to know how to popualate material description in this report.
thanks in advance
Srinivas M

Hi Experts,
This info really helped and now I am stuck in Transports.
I went to GRR1, created new u2018Z_report_pgmu2019 by copying from relevant Library and Report program. Added Company Code in Report Painter & save.
In GR22, choose relevant Report Group and maintain header text Report
In SE93, created Transaction code u2018Z_std_pgm*u2019 with u2018D_SREPOVARI-REPORTTYPEu2019 and value u2019RWu2019 & u2018D_SREPOVARI-REPORTu2019 and value u2018Reportgroup nameu2019.
To Transport this report group,GR52, goto Utilities->Transport->Transport Request Select 'Report Group' radio button click 'Execute'. In the next screen enter report group and execute, In the next screen select the check box for the report group and click execute Then it asked for the transport request.
But there was an error in the QA system. May be I missed transporting the 'Z_Report name'.
Should i do it from GR52 ? if not kindly advise.
Please help me in this final step

Similar Messages

Tcode : VT02N - need to papulate mat. description

Hi,
Tcode Vt02n:
Give shipment no and press enter, from menu GOTO--> Shipment and Deliveries populates report with split deleveries button.. etc,
when place cursor on deliveri no and press split button will populate report, In this report, Material description is not poulating, I want to know how to popualate material description in this report.
thanks in advance
Srinivas M

Hi ,
As BTE is concerned first u have to search for string "OPEN_FI_PERFORM" in progam of that transaction.
system->status->prgarm and find for the above string and list of BTE for that transaction will show and find ur correct BTE.
and choose your correct FM and copy standard FM to ur custom FM and then go to FIBF transaction and then go to
setting->produts->customer and create new entries and the go back and again go to
setting-> process function module->of a customer and give process code and zFM name. and then put break point.
Hope it helps u.

Need help to Modify the STD report which uses the Tcode CATS_DA.

Hi ,
we have a requirement as below. we need Add two Additional Fileds in the OutPut of the Std Report ( Tcode CATS_DA) .( 2 fileds are one is Managername /Manager employee number ) ..
Can you Please where we need to Modify the code to meet the above requirement.
Thanks in Advance.
Edited by: sandeep on Jul 29, 2008 12:45 PM

Copy the report to "Z" version and plug in fields .
Thanks,
Saquib

We need to change the description in SVO according to VOA's description manually

Hi Team
There is diffrence in Desription in SvO (Service Order ) and Vendor outline Agreement. We need to change the description in SVO according to VOA's description manually Please find the below screen Shot. Kindly assist to check the root cause or any setting we need to take.
T-code: iw33 & me33k
SVO
VOA
Br, Kiran

The same, I am telling. While creating VOA, they might have changed the description.
Also, while creating Service Order, they might have changed the description which is different from VOA.
If you don't want to edit the description, then make both fields in disable mode in all phases (creation as well as change), so that user can't change the description.

OSS Notes for Tcode: VT02N

Hi All,
Is there any OSS Notes for Tcode:VT02N.
In my system VT02n is dumping.
Can anybody tell me about OSS Notes so that i can apply for the that.
Thanks in Advance.

Hi ,
While executing Tcode VT02N after giving shipment Number & enter .
After clicking on planning buttion & save it's going to dump.Giving message as below.
Error analysis:
    Calling a COMMIT WORK in an update process is not allowed
    because the function modules triggered in a Logical Unit
    of Work cannot then be processed correctly.
154   CALL FUNCTION 'GET_HANDLE_SD_BILLING'
155     IMPORTING
156       handle = l_sd_billing_exit
157       active = active.
158
159   IF active = 'X'.
160     CALL METHOD l_sd_billing_exit->invoice_refresh.
161   ENDIF.
162
163
164   IF with_posting CA 'CD'.
165     COMMIT WORK AND WAIT.
166   ELSEIF with_posting CA ' AB'.
>   COMMIT WORK.
168   ENDIF.
In Executing the Commit Work it is going dump.
Pls let me know if u have any idea.
Regards,
Priya Agarwal.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
Rex's iPhone
The MAC Address, also known as a Wi-Fi Address is a unique indentifiction number that is assigned to every device. The number will always follow this form:
xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
On the Home screen.....
Tap Settings
Tap General
Tap About
Wi-Fi Address is the item that you want
If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
The Wi-Fi Address for the Mac is located at the bottom of the window
Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

SSRS Hide Description text in Report Manager

Hi
Does anyone know if you can hide the description text on report manager, this is populated in report properties > Description or can be updated direct in report manager.
I want to add a description but I do not want it displayed in report manager, is there a way of removing this?
Thanks

Hi Monkey14,
According to your description, you have a report with description. Now you just want to hide the description when accessing the report manager. Right?
In Reporting Services, we have a css file for Report Manager to set style. Now we just need to modify the style for description box. Please follow the steps below:
Go to Your Disk:\Program Files\Microsoft SQL Server[your MSRS instance]\Reporting Services\ReportManager\Styles\ReportingServices.css.
For your items, the style class name is "msrs-itemDescription":
p.msrs-itemDescription { white-space: nowrap; width: 250px; overflow: hidden; text-overflow: ellipsis; font-size:10pt; color:Gray; }
Add “display:none” in the style. It looks like below:
Save and preview.
Reference:
SSRS 2008r2 cutting off report descriptions in main display page in report manager
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Need to sum max values in a report with Hidden groupings

I have looked all over and have not found my exact situation, so I am posting my first question. I have a report that I have grouped on multiple levels. So my report has a customer/header/detail/release grouping. I have written a custom
expression so that only a single value, which is the max value in the group, is shown in the detail, with all values showing in the release. I have then set my visibility toggle to toggle on header, then detail, then release and I need to sum up those
max values into a field on the report. The custom expression that I have written works correctly when you are showing on the detail level. It gives the correct value, which is the max value in each release.
What I then need the report to do is to sum only that max value and roll that up into the header group, so that I get a total of the max values.
I have tried using the MAX function in my expression to get the correct max value, but I cannot get SSRS 2008 R2 to sum that, and I have tried writing a custom expression that will calculate the max (Non-zero values divided by number of non-zero records) and
both ways work correctly until I try to rollup and sum to the next group level.
I have also tried using a group variable and custom code to get the value and save it to a variable, but I have not had any luck in setting or getting that value correctly back to my report.
At its most basic it feels like I should be able to set a Sum(Max(Fields!ValueColumn.Value) and let SSRS handle how that should be broken out, but after trying that repeatedly I have still had no luck. I cannot adjust the SQL as I need the level of detail
that the report shows, although I could add more fields as long as I don't add any groupings or totals that would reduce the granularity of that data being returned.
Any new avenue to explore would be very helpful.
Thank you in advance,
Chad

Ok, after continuing to search the internet I finally found the extra piece that I was missing that gave me the results I needed. The new expression looks like this:
=runningvalue(Sum(Max(IIF(LEFT(Fields!JobNum.Value,1)="S" AND Fields!Week1STol.Value<>0, CDBL(Fields!Week1STol.Value), 0),"JobItem"),"JobItem"),SUM, "JobItem")
In this I wrapped the original expression of Max in both a Sum and a runningvalue both at the JobItem level to get this rollup value. Now when I open the grouping I get the correct running value at each level.
What this really gives to me is a running total at each of four groupings, even with a "max" value at the detail level. This also allows me to total a max value inline on the report, without needing a hidden row, or report footer.
Thank you to everyone who looked at this, I hope it helps someone else. If this answer is not clear enough, please don't hesitate to add to the comments and I will try to clarify.
Thank you, Chad

Need to add extra field in BEX report

Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabh

hi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind.

Need help showing multiple parameters in a report header

Post Author: Annette
CA Forum: Formula
hi-- i am new to this and i have created a report where the person picks one or more items (they are different hospital suites) and i need for them to print on the report header all of the selections that they chose. right now it only prints the name of the first one they choose..
any help would be good..
i do know it's a string value....
thank-you for anything you can help me with....
basically if 1 is picked then it needs to state that name, if 2 or more are picked id like it to say Name, name, name, etx...

Post Author: Annette
CA Forum: Formula
the actual parameter is a number, but what im trying to populate on the heading is the name of the number..
for example... when you choose the resource unit of 31 when you refresh i want it to show the name of it which is ORA Surgery.... but if they choose 31 & 53 then id like it to show ORA Surgery, ORD Surgery.... right now it just pulls the first name choosen.. does that make sense..
so the parameter is a number, but the name(the one i want populated) is a string
and oh gosh,, thanks for your quick responses..

Need a Syatem variable for Executing the report by RFC.

Hi Experts,
Need a Syatem variable for Executing the report by RFC.
what i mean to say is,i can execure the report directly ...then no issues.
But if i execute the Report by RFC ,then i should put a condition with system variable...
Please suggest me ,how can put a condition when i am executing the report through RFC.
Thanks
Babu

Hello Friend,
what I understood that you want to put some extra condition if that report is getting called from RFC...
you can use the system variable SY-CPROG....it will hold the value of the report when it is geeting executing directly...
but when it is getting executed therough RFC...it will hold that RFC name...
Thanks
Krish

I need to see how many times a report is executed in the system.

Hi,
I need to know how many times a report and background job is executed in the system.
How can I know that?
Thanks for the help!

hi
For all reports and transactions execution info is stored in table MONI.
Read the System log using the Transaction SM21. may be you can find some info here.
U can use trx STAT, here the system stores the statistic only for a certain period (lst week, last month,...).
Also try stad transaction.
Reward points if helpful.
Regards
Nilesh

My ipod touch was stolen and I need the serial number for the police report how can i recover it

my ipod touch was stolen and i need the serial number for the police report how can i get that

- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Need a bapi or table for GL Report

Hi experts,
I need a bapi or table for generating report period balance for GL accounts. i found one bapi BAPI_GL_GETGLACCPERIODBALANCES which is closer to my requirement. But i want to get the balances for cost center and particular material. As Cost center and product ranges are in my selection fields.
Can anyone tell me table or BAPI?

SAP standard infoset query provides a report STDCOST for this.
May be this will suit your requirement. It will give material wise costing.
hope this helps.
reward if helpful.

I needed to make a account receivable collection report

Hi
I needed to make a account receivable collection report. for that which table I needed select.
bsid is enough or I needed go for any other tables also like bsad.
Regards
Sebastian

Hi Sebastian,
Use BKPF: Accounting Document Header and BSEG: Accounting Document Segment.
Best regards,
Shahid Malayil

TCode VT02n need to papulate mat.description in std. report

Similar Messages

Maybe you are looking for