TCodes for setup tables

Hi experts,
Can anyone provide me the transaction codes to fill the setup
tables of:
2lis_11_vaitm
2lis_12_vcitm
2lis_13_vditm
2lis_04_p_matnr
2lis_02_itm.
Full points will be assigned.
Thanks & Regards,
V N.

Hello,
Goto SE93 OLI*BW -> F4 you will get all the Setup table tcodes
OLI1BW               INVCO Stat. Setup: Material Movemts 
OLI2BW               INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW               Reorg.PURCHIS Extract Structures BW 
OLI4BW               Restructure of PPIS Extract Strctrs 
OLI7BW               Restructure of VIS Extr. Struc. Ord.
OLI8BW               Restructure VIS Extr. Str. Delivery 
OLI9BW               Restructure VIS Extr. Str. Invoices 
OLIFBW               Restruct. Rep. Manuf. Extr. Structs 
OLIIBW               Reorg. of PM Info System for BW     
OLIQBW               Reconstruct QM Infosystem for BW    
OLISBW               Reorg. of CS Info System for BW     
OLIZBW               INVCO Setup: Invoice Verification   
Thanks
Chandran
Edited by: Chandran Ganesan on Jun 11, 2008 3:31 PM

Similar Messages

  • How to reduce downtime for setup table

    Scenario u2013According to system data, Setup table will normally take 5 days to fill but client agreed only for max 2 days downtime. User can do change only last 3 month documents not before that. For filling 3 month data in set up table 1 day required so I have to mange options accordingly.
    Datasource u2013 2LIS_13_VDITM -> DSO u2013 ZBIllIG ->Info cube
    I have to Reduce Downtime for Setup table so planning following optionsu2013
    1.     First run the info package for Initialization without data transfer. Then start filling setup table without blocking the User. In case Users changes any document at the time of filling setup table then these changes will move to delta queue. Once setup table filled then execute full repair request and then Delta info package.
    2.     Early delta initialization u2013 no idea how to perform steps.
    Please share your views with detail steps.
    OLI*BW doesnu2019t have any date range in selection criteria so manually I will find out document for particular dates and use these document range.
    Checked lot of post in SDN but still expecting final answer to go ahead in Production.

    Hi ,
    Your requirement is Billing ODS and Cube - Reset up in R/3 SYSTEM & Initialization in BW SYSTEM .
    Before starting find the previous data load volume and size.
    1.Go to LBWG application value=13 (Always Schedule the job in the back-ground mode)
    2.Verify using tcode u2018SE16u2019 that there are NO records in u2018MC13VD0ITMSETUPu2019 table after above delete job is complete.
    3.Suspend the process chain job in BW.This is to avoid it getting kicked off while the reload process is still in progress.
    4.Need to check LBWQ in R/3 system for MCEX13, unprocessed Outbound queue (records). This should be empty as the last delta would have processed all.
    5.Delete the initflag in BW.
    6.Need to check RSA7 in R/3 SYSTEM to verify that there is NO record for 2LIS_13_VDITM    (to be done right before the Setup job).
    7.Create New Info Package for Info Source '2LIS_13_VDITM' for u2018Initialize without Data Transfer Optionu2019 .Execute the package.Re-establish the Delta processing flags in R/3 and BW for the Billing TD load .
    8.Save the record count for table u2018VBRPu2019 using SE16 right before the setup job.
    9.Schedule Billing Data Setup Job 'OLI9BW'  in R/3 SYSTEM .
    10.After the Billing Setup job is complete in R/3 system, get the record count of table u2018VBRPu2019 again using u2018SE16u2019
    Expeted time in R/3:5 to 7 hrs(setupjobs)
    Expeted time for init and fullload : 6 hrs
    ODS activation : 3hrs
    Cube and with agrregates fill all : 8hrs.
    Thanks,
    naidu.

  • Tcode for any table

    Hi expert
    I have created a ztable and maintained table maintenance generator . On production server user want a Tcode for particular table that auto maticaly open the screen where data will be posted.
    Thanks
    shekhar

    Hi,
    There is no tcode for any table.
    Itu2019s only other way that u use tables in your transactions.
    Press F1 in the field for which u want the table.
    Then it will show some description... there clicks on technical settings button
    in properties it will show some info including table name....
    Regards,
    Shamma

  • How downtime can be reduced for setup table update.

    Hi;
    Can anyone tell me various ways to reduced system downtime for setup table updates.
    thanks
    Warm Regards
    Sharebw

    Hi,
    You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
    try Early Delta Initialization
    With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
    Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
    You cannot run an initialization simulation together with an early delta initialization.
    hope this link may make you clear about early delta init
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
    thanks,
    JituK

  • POV-After creating Tcode for a table SM30 I want F4 Help here

    Hi All,
    After creating Tcode for a table, When I am trying to give table entries thro' this Tcode, I want F4 help for those fields. Apart form assigning "Fixed values" in Domain level how can I achieve this.
    Points Assured.
    Regards,
    Suresh

    Hi,
          You need to create search helps based on this table for each filed or one for all the fields with proper import and export paramters. Or else you can give check table entries for each of the table fields for which you need the F4 help. Check table us assigned to a field using the Foriegn key assignment.
    Best Regards,
    Sesh

  • Underl;ying database tables for Setup Tables

    Experts,
    Can anyone tell me what are the underlying tables for Setup tables for Purchasing which I can check via SE11 in R/3.
    Thanks,
    Jain

    Hi Rajesh,
    You can check the records in NPRT transaction.
    Hope this helps you.
    Regards,
    Saravanan.

  • How to find Tcode for database table

    Hi Gurus,
    I need to find out tcode for Standard SAP table in SCM APO '/SAPAPO/PBMVWT' for maintaining Plannning book text in different languages.
    The problem is that Table maintainance is not maintained so SM30 wont work. I tried Where used list option for table but no tcode or report found using this table..
    Kindly help
    Swapnil

    Hi,
    there is no maintenance txn. If you need to have text in different languages, you need to do it as follows:
    - logon for example once in english
    - goto txn /SAPAPO/SDP8B
    - maintain the text in English and activate the planning book.
    - Logon in the other Language
    - enter /SAPAPO/SDP8B again
    - Type in the text in the other language and activate the Planning book again.
    This will give the planning book language specific texts.
    Best regards
    Rico Frenzel

  • Creating Tcode for Custom Table

    Hi all,
              I have created a custom table ZSALESMANAGER, I have created a Maintenance view for this table ZSALESMANAGER_MV. I have to create a custom Tcode for this maintenance. so that when the i enter this tcode i should get the maintenance view scree of the table.
             Please help me, how to do this.
    Thanks & Regards,
    Poorna.

    please  go throught   below link ..... it was  given with  screen  shots  of the   T.code   Creating  for the   table after the   maintaince  view   had been created ......
    <a href="http://">http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm</a>
    <a href="http://">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc</a>
    reward points  if it  is  usefull ...
    Girish

  • Steps for Setup table

    Hi,
    I am using 2lis_02_itm and when trying to pull data.. it is not taking single record.
    What we have to do? DO we have to fill setup table?
    How to do this.>Can anyone explains me in steps
    Thanks
    Ananya

    step is to Delete the setup tables
    7). Go to T-Code SBIW
    8). Select Business Information Warehouse
    i. Setting for Application-Specific Datasources
    ii. Logistics
    iii. Managing Extract Structures
    iv. Initialization
    v. Delete the content of Setup tables (T-Code LBWG)
    vi. Select the application (01 – Sales & Distribution) and Execute
    - Now, Fill the Setup tables

  • Steps for setup tables for 2lis_08trfkz?clarification?

    Hi guru's
    we want to enhance the extrator 2LIS_08TRFKZ.
    I just want to know which transaction we use to fill setup table for this extractor.
    Do we use OLI8BW or something else
    A quick response wil be highly appericiated.
    Regards,
    Amandeep

    Hi Srikanth,
    Thank you for a quick response.
    Yes i have deleted the setup tables before filling them
    the job status say it is finished
    the only bit i am worried is the log which says the setup is for application 12 although we are running it for 2lis_08trfkz and which is under application 8(shipment).
    Please clarify if this is the it is suppose to work.
    Once again thank you very much for your help and time.
    Regards,
    Amandeep.
    Start date        14.10.2006   Name of run      TRFKZ      
    Start time        19:49:49     User name        SINGAM     
    Date of terminatio00.00.0000   Application      12         
    Time of terminatio00:00:00     Source table     LIKP       
    Finish date       15.10.2006   New run                     
    Finish time       03:53:37     Document from    0000000000 
    Duration (min)    483.8        Document to      ZZZZZZZZZZ 
    No. of docs       1,707,237    Version          &(         
                                   Variant

  • Period for Setup table Fill

    Hi Experts,
    Is there anyway of giving time ranges for filling up sales order & billing document setup tables?
    LIke, i want to fillup setup table for sales order for the month of Jun to August 2007.....can do this?how?
    Any help is appreciated.
    Rgrds,
    Vaishnavi
    Edited by: Vaishnavi S on Apr 17, 2008 5:34 AM

    Hi,
    I think you can. I believe you are trying to fill setup tables using some selections (probably to minimize init down time).
    This should help.
    Fill the setup tables with already closed values and then fill up again with open values.This will reduce the down time.
    Initialize  closed periods first in which users wont enter data ( for example in 2007 or 2006), this initializations can be done while users are working. Then the initialize last period at night/weekends.holidays etc.
    If you know documents that are in closed periods, and you are sure that these documents can no longer be changed, you can only fill the SetUp tables for these documents or only for these periods, by continuing to post in open periods. You then initialize only for these intervals, delete the setup table, and only then do you fill the setup table with the rest of the documents  this procedure can drastically reduce the downtimes of your system.
    However, there is a risk that user exits (and in LIS, formulas and conditions) can be used to retrieve documents that are in periods that are already "closed periods".
    One more thing what you need to bear in mind is, to check if there are any Scheduled jobs which are updating the transaction tables, which would definitely cause Data Reconciliation Issues.
    Multiple init  
    Thanks,
    JituK

  • Overwrite Functionality for Setup Tables

    Hello SAP Guru's,
    I have question can we overwrite the setup tables if it got cancelled due to some reason  in SAP ECC server .
    Regards,
    Quaraishi

    Dear,
    Setup tables are cluster tables. Now the Full load to this table does not take long time in source system. So from performance perspective this is not beneficial to do the Setup table overwrite.
    But if you want to know from knowledge purpose, then answer is no. You can NOT Overwrite to a setup table.

  • Tcode for comparing tables

    Hi all,
    Can anyone tell me the t code for comparing tables
    Regards,
    Sowmya

    Hi,
    If it for data then,
    SCMP      Check the table data across clients..
    cheers,
    jacks

  • Ways to reduce downtime for filling up setup table

    Hi Experts,
    Can anyone tell me the step by step process so that i can reduce downtime for filling up setup tables?
    I know that setup tables can be filled by considering sales document numbers....but the further steps are not clear with me...........specially with data loadin till PSA and then to ODS/Cube
    So plz throw some light on this.......
    Regards,
    Vaishnavi.

    Hi,
    You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
    You can run them after business hours so that there wont be any transactions, or in the night times or you can do it on week ends so that there is no need to take down time.
    Fill the setup tables with already closed values and then fill up again with open values.This will reduce the down time.
    Initialize  closed periods first in which users wont enter data ( for example in 2007 or 2006), this initializations can be done while users are working. Then the initialize last period at night/weekends.holidays etc.
    If you know documents that are in closed periods, and you are sure that these documents can no longer be changed, you can only fill the SetUp tables for these documents or only for these periods, by continuing to post in open periods. You then initialize only for these intervals, delete the setup table, and only then do you fill the setup table with the rest of the documents  this procedure can drastically reduce the downtimes of your system.
    However, there is a risk that user exits (and in LIS, formulas and conditions) can be used to retrieve documents that are in periods that are already "closed periods".
    One more thing what you need to bear in mind is, to check if there are any Scheduled jobs which are updating the transaction tables, which would definitely cause Data Reconciliation Issues.
    Try Early Delta Initialization
    With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
    Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
    You cannot run an initialization simulation together with an early delta initialization.
    Hope this link may make you clear about Early Delta Initialization
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
    http://www.allinterview.com/showanswers/2907.html
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/early-delta-initialization-459379
    http://books.google.co.in/books?id=qYtz7kEHegEC&pg=PA293&lpg=PA293&dq=early+delta&source=web&ots=AM1PtX6wcZ&sig=xKOF85Gb8UtszY44zt06K6R0n3M&hl=en#PPA290,M1
    http://www.blackwellpublishing.com/journal.asp?ref=1069-6563&site=1
    EARLY DELTA
    Early delta Initialization
    How To… Minimize Downtime For Delta Initialization
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
    How To Minimize Effects of Planned Downtime (NW7.0)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/901c5703-f197-2910-e290-a2851d1bf3bb
    Note 753654 - How can downtime be reduced for setup table update
    602260 - Procedure for reconstructing data for BW 
    437672 - LBWE: Performance for setup of extract structures 
    436393 - Performance improvement for filling the setup tables 
    Note 739863
    /thread/756626 [original link is broken]
    Re: How to Setup and INIT from 2LIS_13_VDITM with millions of records
    How downtime can be reduced for setup table update.
    Fill setup tables without locking users
    Initialization Setup Tables.
    Hope this helps.
    Thanks,
    JituK

  • Filling setup tables

    Actually i need to fill the setup tables for 2LIS_02_SGR,2LIS_02_CGR,2LIS_02_SCN,2LIS_02_ITM.
    whts the tcode for this?

    Hi,
    T Code : SBIW
    Settings for Application-Specific DataSources (PI)->Logistics>Managing Extract Structures>Initialization-->Filling in the Setup Table -->Application-Specific Setup of Statistical Data --> in that Youcan perform the Setup (Example : SD-Sales Orders - Perform Setup) and execute ..
    or
    else direct T Code : OLIBW ( means based on your application like sales order/billing/ purchase etc)• For setup tables T-Code is OLI*BW where * equals to application number like 02 fro purchasing,08 for shipment…..
    Check out this message from Eugene
    Here are the codes:
    OLI0 Plant Maintenance Master Data
    OLI1 Stat. Setup: Material Movemts
    OLI1BW Stat. Setup: Material Movemts
    OLI2 Stat.Setup: Stor. Loc. Stocks
    OLI2BW Stat.Setup: Stor. Loc. Stocks
    OLI3 PURCHIS Statistical Setup
    OLI3BW Reorg.PURCHIS extract structures BW
    OLI4 SFIS Statistical Setup
    OLI4BW Reorganized PPIS Extract Structures
    OLI5 PMIS Statistical Setup
    OLI6 Periodic stock qty - Storage locatn
    OLI7 SIS Statistical Setup: Orders
    OLI7BW Reorganized VIS Ext. Struct. Order
    OLI8 Set Up SIS for Deliveries
    OLI8BW Reorganized VIS Ext. Struct. Del.
    OLI9 SIS Statistical Setup: Billing Docs
    OLI9BW Reorganized VIS Extr. Struct. Bill.
    OLIA Maintenance Processing
    OLIB PURCHIS: StatUpdateHeader Doc Level
    OLID SIS: Stat. Setup - Sales Activities
    OLIE Statistical Setup - TIS: Shipments
    OLIF PPIS: Setup-RepetitiveManufacturing
    OLIFBW Reorganized Prod. Extract Structure
    OLIIBW Reorg. of PM Info System for BW
    OLIM Periodic stock qty - Plant
    OLIP C Plant Maintenance Planning
    OLIQ Reorganization of QM info system
    OLIQBW Reconstruct QM Infosystem for BW
    OLIS LIS in the IMG
    OLISBW Reorg. of CS Info System for BW
    OLIX Stat. Setup: Copy/Delete Versions
    OLIZ Stat.Setup:Invoice Verificatn
    OLIZBW Stat.Setup:Invoice Verificatn
    You can see them in se93, typing in OLI* and pressing F4.
    Also, you can execute operations in SBIW tree and see the appropriate tcode in the bottom of the screen (click there where you see your system abbreviation).
    Best regards,
    Eugene
    Regads,
    San!

Maybe you are looking for