Tcodes in R3 for BI
Hi Experts,
Can any one give me the list of tcodes that the BW user needs on BW standpoint - for ex: like creating data source? I need them to put a request for authorization.
Also, kindly give me the use of the tcode.
Thanks in advance.
With kind regards,
Kannan
I would also add:
BD87 Status Monitor for ALE Messages
LBWE LO Data Ext.: Customizing Cockpit
LBWG Delete Setup BW Data
NPRT LIS/setup/log
RSO2 OLTP Metadata Repository
SE37 ABAP Function Modules
SE38 ABAP Editor
SMQ1 qRFC Monitor (Outbound Queue)
And all OLI* transactions which will fill the setup tables for the LIS datasources (even though they can be accessed in SBIW).
Edited by: Geo on Feb 23, 2009 4:27 PM
Similar Messages
-
What is SM62 Tcode is used for? and the consequence's for executing it?
What is SM62 Tcode is used for? and the consequence's for executing it?
Thank you,
YorkHi Les,
You can goto this URL to understand more about events :
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
http://www.sapfans.com/sapfans/sapfaq/robert.htm
About my experience working with events:
In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
To automate the loading process we created events for each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
So this way we used to automate data loads.
This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
Hope this helps !!
Assign points if helps !!
Regards,
Naveen Rao Kattela -
There is Tcode CU51which is for Order BOM ,Is there any BAPI for OrderBOM.
Hi All,
There is Tcode CU51which is for Order BOM , So is there any BAPI for that Ordre BOM
pls can you help me
thanks
marsHi,
Refer These links:
https://forums.sdn.sap.com/click.jspa?searchID=13707386&messageID=5726376
https://forums.sdn.sap.com/click.jspa?searchID=13707605&messageID=4868211
Regards,
Shiva Kumar -
TCode to check for enterprise structure inconsistency
Hi
Is there any Tcode to check for enterprise structure inconsistency? I think someone mentioned here but i cannot find it now.Hello Deep,
Please use the T-code --> OVX8N for checking the consistency level of enterprise structure affiliated to SD.
Here you will have the option to check the organisation unit like Sales orgnisation, Distribution channel, Division, Sales Group, Sales Office, Plant and Shipping Point.
Regards,
Sarthak -
Regarding BP tcode and MK03 for updating payment terms for different vendor
My requirement was to update the payment terms in to MK03.
Our business useseres will give the payment terms for FI Vendores in BP tcode and save payment terms for FI Vendores in BP TCODE and this payment terms shoule updated ditrectly in to MK03 for every FI Vendor .
How we will update the payment frome BP to MK03 directly. In BP the technical name for payment terms was LFB1-ZTERM and in MK03 the technical name was LFM1-ZTERM .
I want to update payment for single company code only. In mk01, we creating vendors for purchase org level how we will update payment to mk01 from BP TCODE pls give how i have to update this payment terms from BP to MK01.My requirement was to update the payment terms in to MK03.
Our business useseres will give the payment terms for FI Vendores in BP tcode and save payment terms for FI Vendores in BP TCODE and this payment terms shoule updated ditrectly in to MK03 for every FI Vendor .
How we will update the payment frome BP to MK03 directly. In BP the technical name for payment terms was LFB1-ZTERM and in MK03 the technical name was LFM1-ZTERM .
I want to update payment for single company code only. In mk01, we creating vendors for purchase org level how we will update payment to mk01 from BP TCODE pls give how i have to update this payment terms from BP to MK01. -
Tcode SD related for displaying a report with completed deliveries
Dear SAP Experts,
I would like to ask you a question.
Is there any Tcode for displaying a report with all the completed outbound deliveries (8000++) or posted goods issues (4900++) with the relevant net values of the relevant sales orders, BEFORE the creation of the relevant billing documents.
Great Thanks in Advance
Kind Regards
JohnYou can use transaction VF04 - Billing due list.
-
How to get or what tcode to use for details statistics of AIX server in sap
Dear Sir,
How I get the details of AIX Server's Statistics in SAP. I mean by which tcode I can get it. Or in Server level what command should I use .
Thanks in advance,
PranabThanks every one for their prompt reply.
I have got ans. by using the command : prtconf
Thanks once again everybody.
Thanks and Regards,
Pranab -
What is tcod db01 is for? wt actions to be taken
hi experts,
wt is the user of tcode DB01 and if we find oracle dead locks
wt action has to be taken?Hi,
DB01: Exclusive Lock waits
The reason you have transaction DB01 is to monitor the database locks which are created when the work process does the actual write/delete on the database. DB01 allows you to see these locks and also allows you to identify deadlocks
Have a look into this link for detailed info about SAP lock and DB Lock.
http://help.sap.com/saphelp_nw04/helpdata/en/f4/71aa036c874c308c1a819f05321137/frameset.htm
Apart from the fact that DB01 shows Exclusive Lock Wait Situations and not locks themselves normally, the main difference between SAP-Locks and DB-Locks is that not every SAP-Lock has exactly one DB-Lock associated with it necessarily. It's similar to differences between SAP- and DB-DataDictionary. They're closely related, but when it comes to the details - worlds apart.
When a lock request comes from a user for a table, first the lock entry is made in SM12. The lock entry is made only when no other lock entries are present for that particular table.
To execute the lock request ( or the lock entry in SM12 ) a corresponding lock object is defined in ABAP dictionary. The lock object is nothing but, it contains the details on which table to be locked.
So when corresponding lock object is created, it has a series of lock modes assigned to them like, Write locks (X), exclusive write locks (E), Shared locks (S). The lock modes are shown SM12.
THis is definite indication that lock objects for defined for lock entries in SM12.
Regards
Aashish Sinha
PS : reward points if helpful -
Query on programe RFLKORD10 for tcode FI.27 for account statement
for tcode : fi.27
If table bsid or bsad has dunning area with some specific value then i want to split account statement.
(we copied rfkord10 into zprogram and use that one.)
if anyone worked on same then please help me out.
Solution with coding or more technical explanation will be appreciated.
points will be rewarded.on what basis u want to split ? first get the all the data into one internal table then split Internal table into 2 or 3 based on ur split conditions ?
just try , its simple , work around data only,so config .
Regards
Prabhu -
CATT Test case for ME41 tcode(Multiple items for inventory and service )
Hello Gurus,
Now we are having quotation legacy file for Tcode ME41 for inventory and service items. We are using tcode <b>SCAT</b>
for CATT. Every thing going fine at recording in test case. i dont know where should i specify my legacy file path. I found there is one download option while before running test case. its not taking the file path. is there any other file path for running test case?
advice me.
regards
dinesh.a
<b></b>Hi
I think you should use an abap program and not LSMW, because the problem is you have to create a recording for trx ME41 in the LSMW and after you can't change the abap code created.
In this way you could insert only a certain number of items by a project of LSMW, and it depends on your recording.
So if you can't know how many item should be loaded, it's very hard to use LSMW.
Max -
F4 Help for standard selection field of tcode F-02 for the field of xblnr
Hi Experts..........!
I need F4 help fo the field of bkpf-xblnr in that selection screen of tcode F-02 .
please help me....!
Regards ,
vamsiHi,
Go for Implicit enhancement...Pls go the link..
Re: Executing a Planning Enhancement in Debug -
When we try to save my tcode it raised for request why?
hi Experts
i have a problem please solve it
when we executing tcode --j1id(some mm consultant) and done some work & save it at that time it raises for workbench request
i dont understand why that trancation table raised for request please reply me for this issue
thnks & regardsHi,
If you look at the transaction J1ID Excise Rate Maintenance, which itslef says that this is not the daily used transaction for transaction data but for maintaing values like customization or maintaing master data and thats the reason it is asking for a transport. If you are doing this in a development system then client setting might have allowed to make changes and record the changes in a transport. But, if it is a quality or production system then check client settings if they are opened for changes. If so close the client and transpor the changes from development system.
Hope clarified.
Regards,
Sharath -
Value and quantity is not displaying in Tcode MC.9 for some materials
Dear Sir,
For the material XYZ Material Type is FERT but when I check the stock in MC.9 with material type FERT, it is not displaying any value and quantity but when I donu2019t put any Material Type it is showing me the value with quantity. Even I tried to change the material type to FERT there also it gave me message as "No data exists for chosen selection". Why this massage is showing like this ?
Please suggest.
Regards,
Sandip SahuHi,
Some times there are some issues with S032 info structure. Check report RMCBMBEW and see if you can locate your material,
Thanks -
Tcode to look for a transport request number
Hi all,
I have to look for request number details .I dont have access to SE01 . How can i look that details?Hello Priya
The standard transaction for finding transport requests is <b>SE03 </b>(choose option <i>Requests/Tasks -> Find Request</i>).
If you are not authorized to call this transaction try to execute the underlying report <b>RSWBOSSR </b>using transaction <b>SA38 </b>(menu <i>System -> Services -> Reporting</i>).
Regards
Uwe -
Hit error when run tcode /ns_alr_87013019 which for List Budget/Actual
Hi guru,
i hit this error :- please advise me how to solve this....is it because of the report program????
Runtime Errors PERFORM_PARAMETER_MISSING
Except. CX_SY_DYN_CALL_PARAM_MISSING
Date and Time 26.08.2008 15:56:33
Short text
Missing parameter with PERFORM.
What happened?
Error in the ABAP Application Program
The current ABAP program "GP5TM74OF5MOLFU3IA1FXPTFLKV800" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_MISSING', was
not caught in
procedure "CHECK_RECORD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A PERFORM was used to call the routine "E03_FILL_GJAHR" of the program
"SAPFCOOM".
The current call contains 4 actual parameter(s),
but the routine "E03_FILL_GJAHR" expects 5 parameters.
How to correct the error
Correct the PERFORM call. You can find out where the call
occurs in the section "Active calls / events".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"PERFORM_PARAMETER_MISSING" "CX_SY_DYN_CALL_PARAM_MISSING"
"GP5TM74OF5MOLFU3IA1FXPTFLKV800" or "GP5TM74OF5MOLFU3IA1FXPTFLKV800"
"CHECK_RECORD"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".hi guru...
i did what u as below and all look green....
..but when i go gf55 the put group 60BU it still face the problem like i post early question......
please...sorry make u hard to think....
Hi,
I think it should work but why its happening, cant understand. Anyways, try following
Go to SA38. Enter RGRJBG00 and Execute
Enter the report group 6OBU and Table *RWCOOM. Tick on your report group and click on Generate button.
I hope this should work.
Regards,
Jigar
Maybe you are looking for
-
Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i wi
-
Open youtube video link from gmail in new tab instead of same page?
Hi came back t fox after 3 years. Yesterday after 1,2 months of using a standard action was changed. I was in my gmail clicking on youtube notification to open video in next tab. While it was late FF asked me would I like to stay on page or leave it
-
CoreServicesUIAg[845] Unable to clear quarantine
Hi. Recently i'm getting lots of new kernel.log errors/messages. Feb 16 22:28:27 imac27 kernel[0]: CoreServicesUIAg[345] Unable to clear quarantine `CodeResources': 93 Feb 16 22:28:27 imac27 kernel[0]: CoreServicesUIAg[345] Unable to clear quarantine
-
Message Splitting with out BPM
Hi, Is there anyway to split the message into different messages suppouse M1,M2,M3. And I want to route these messages i.e. M1, M2, M3 dynamically to receivers using enhanced receiver determination. i.e. M1 is to route R1,R2,R3. M2 needs to route
-
Subtitle on black instead of picture
I imported my sub into dvd studio 4, played in th simula and everything looked fine. but when i burn the video ts and play it in the dvd player on the mac. the subtitles play on black, and when there is a gap before the next subti comes up the pictur