Tcodes ralated to Adapter Engine in XI

Hi all,
Pls let me know the tcode related to the adapter engine in XI server also the tables related to adapter engine .
Thanks in advance .
Regards,
Suhas

HI ,
Thanks for the answer .
Can you tell me which table contains the 'Holding' and 'To be delivered' status information about the message in Adapter Engine .Also which tcode gives me the message and their status in Adapter Engine ? .
SXMB_MONI gives the GUIDs and details concerned to the Integration Engine . In a similar way what tcode gives me the GUIDs and detials in Adapter Engine .
Thanks in advance .
Regards,
Suhas

Similar Messages

Problem With Seeing Message in Adapter Engine

Hello Everyone,
We are facing a strange problem while running an Integration Process, BPM in PI. In the process, we are trying to read a .CSV File and convert it into a .XML File via FCC. The .CSV file is placed in the XI box itself, under a certain directory. We have configured the process such that whenever the .CSV file is read, its attributes are set to 'read only'. After configuring the process, the required XML file did not show up. So we checked that whether the .CSV file was read and it showed up attributes of 'read only'.We cross checked
 -First by going to SXMB_MONI; here it said 'No messages available for selection'
 -Then by examining the 'channel monitoring' in AE; where we found both the sender and receiver channel are showing green. The sender channel first shows up that 'Processing started' and then 'Processing Completed Successfully'. The receiver channel does not show up any messages.
 -we checked for the XML messages that are in the Adapter in IDX5; it shows 'no messages selected'.
 -We anticipated that it may be a cache problem and cleared all the caches; but when we tried to clear the Adapter Framework Cache, it popped up an authorization error and the problem persisted.
We are using NW2004s with SP6 at the ABAP and BASIS stack and SP 9 at the Java Stack. Also, all the required connections made in SM59 are in order.
Now, What can be the problem? Is it the difference in SP level that is causing the problem? Or is it something else? What have we missed? Guys, please help us solve this problem.
Need Help. Pleae Reply. Points will be awarded.
Thanking in anticipation.
Amitabha

Hi Shabarish,
1.Document name is indeed the name of message type in our case.
2. We did not use delete mode; but once the file was read- we manually changed its attributes from 'RA' to 'A'..and it became 'RA' again after 2 seconds; which is our polling interval.
3. And we have discovered that the file is being read properly..because we can see the XML payload of it and it contains the correct data.But still it does neither show up in SXMB_MONI..nor in IDX5.
Can you please tell us what are the necessary roles for the User PIAFUSER? We suspect that somewhere's an authorization error we are getting; because the AF cache refresh attempt shows "Forbidden" and we are getting an error in Tcode SXI_SHOW_MESSAGE as:
AE_DETAILS_GET_ERROR: no_adapter_engine_found: Unable to find Adapter Engine:; Stack trace shows:Error while reading access data (URL, user, password) for the Adapter Engine

Messages are in To be delivered state in the Adapter engine

Hi,
For all the receiver file adapters the messages are successful processed through Integration Engine ,no messages are stuck in SMQ1 & SMQ2 on Inegration engine.
All the messages are stuck in Adapter Engine with the status "To be Delivered ". These are all asynchorus scenarios. The quality of service is also EO.
We restarted the J2EE engine also several times but no luck.
Did anyone had similar issue?
Thanks
Sachin

Hi,
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords and tcode - SXMB_ADM and "active" the queue then the messages and check it out.
Regards
Agasthuri Doss

Adapter Engine Not Showing up in SXI_CACHE

Hi,
The adapter Engine is not showing up in the Transaction SXI_CACHE and also when i create a RFC comm channel it is not showing up in the Adapter Engine Dropdown.Can anyone let me know whether these both are linked and is there any way to rectify the same ?
Regards,
Kittu.

Hi Kittu,
try restarting the J2EE Engine. This should register the AE with the SLD.
If that does not work then check there are not SLD inconsistencies,
i.e.,
#764176 Error in XI due to inconsistent SLD contents
If that does not help try calling the FM - SAI_AE_DETAILS_GET
e.g.
TCODE
SE37
SAI_AE_DETAILS_GET
 Import parameters Value
AE_NAME AF.<SID>.<IS Hostname>
BYPASSING_CACHE X
The result should be something like
Export parameters Value
AE_MSG_URL http://<IS Hostname>:<J2EE port>/MessagingSystem/receive/AFW/XI
IS_SERVICE_USER_NAME XIISUSER
IS_SERVICE_USER_PASSWORD
WAS_CACHED
and the AE should be listed in
TCODE
 SXI_CACHE
 -> GoTo AE Cache

Dynamic change of Adapter Engine during transport

Hello All,
I am trying to understand the following, can some one explain me how and what changes are done to get this working.
so if you check both the images, in the Dev box (first image), we use central adapter engine and after transport to Quality box the adapter engine is automatically changed to af.qpp.qppdb1.
I want to understand how and what config changes are done in order to get the new adapter engine name changed automatically. I tried to search some forums but all in vain.
Answers will be rewarded for sure.
Thanks in anticipation

hi karim,
As liad said ...
In fact the adapter engine linked to the integration engine in our configuration is wrong.
Whetever we are trying to do through sxmb_adm it remain the same.
If you are going to vhange the IE configuration ...It will not remain the same....
Execute the TCode SXMB_ADM goto Integration Engine Configuration
you can modify your Configuration as per Requirement..
regards,
vasanth.

Adapter engine payload

Hi
In my XI system I am able to see the Adapter engine payload for asynchronous messages.
But it is not showing the payload for synchronous messages. Where can I change the settings
so that I can see the payload for synchronous messages too.......?? Meanwhile in case of
asynchronous messages my XI system is asking for saving the payload rather to displaying the
message in the window itself. Where can I change the settings so that it won't ask for saving
the payload ??
thanks
kumar

Hi,
You will be only able to see Asynchronous messages in Adapter Engine and not the Synchronous messages.
For Synchronous message logs you need to login to SAP ABAP stack, TCode sxmb_adm -> Integration Engine Configuration -> Specific Configuration
Edit and Add new Entry with following details
Category: RUNTIME
Parameters: LOGGING_SYNC
Current Value: 1
Regarding your second query, can you tell the exact page from where you are trying to see the payload. It should show the payload in the window only. I don't think there is some setting for this in XI.
Thanks
Amit

Can't reach the Central Adapter Engine (HTTP 403)

Hello,
in a simple scenario (AdapterEngine -> IntegrationEngine -> AdapterEngine) we get a HTTP 403 failure in the 'Call Adapter' - Service.
When we try to connect the URI "http://:50000/MessagingSystem/receive/AFW/XI" and logon with user XIISUSER we get the same error.
XI Release is: XI3.0 SP17 ... Adapter Engine is the central engine ...
... any ideas?
Thanks
André

Hi Andre,
HTTP 403 is related to authorisation error.
This topic has already been discussed. I paste hereunder:-
Check if the service users XIAFUSER and XIISUSER are not
locked.(TCODE: SU01)
Also check if these service users have sufficient authorizations.
XIAFUSER: SAP_XI_AF_SERV_USER_MAIN,SAP_XI_APPL_SERV_USER
XIISUSER: SAP_XI_IS_SERV_USER_MAIN,SAP_XI_IS_SERV_USER
I hope this provides you a solution.
Regards.
Praveen

PI 7.11 Central Adapter Engine is not started

Hi Experts,
After active objects list, in the central adapter engine: ache update not yet started.
Looking for this error, is possible that is the RFC INTEGRATION_DIRECTORY_HMI because responde 403 forbidden,
Did you have any tips?
Thank you!
Bruno

Are you sure supplied credentials are valid for PIISUSER?
1) HTTP response does not contain a valid XML root tag or Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')
The error 'HTTP response does not contain a valid XML root tag' occurs when path prefix of the destination is '/dir/hmi_cache_refresh_service/ext'.
The error 'Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')' when path prefix is '/dir/CacheRefresh'.
Solution: Go to transaction sm59 and open destination of type 'H' INTEGRATION_DIRECTORY_HMI. Select "Connection Test". The connection test should return HTTP response 200.
Now go to "Logon & Security" tab and ensure that username and password are stored in the system. Fixing credentials should fix the problem.
Note: Credentials cannot be tested via "Connection Test" tool. If used credentials are wrong, the server simply returns login html page (using HTTP response code 200). As the login html page is not a valid cache refresh xml document, an error is shown in sxi_cache.

PI 7.11 - Configuration: Adapter Engines Not found

Hi,
We have a PI 7.11 System that is connected to a central SLD. There are also two PI 7.0 systems connected to this SLD. If i open a communicationChannel i get following message:
Adapter Engines Not foundNo SLD elements of type SAP_XIAdapterFramework found
If i look in the SLD Technical Systems (Exchange Infrastructure), i see the three PI systems but only the Adapter Engines of the two PI 7.0 systems.
How can i check if the adapter engine is up and running and if it has correctly been registered by my SLD. Are there any documentation according this configuration?
Thanks in advance

It seems adapter engine is not registered properly. For more details, please refer to the following sap notes:
1. [Note 764176 - Error in XI due to inconsistent SLD contents|https://service.sap.com/sap/support/notes/764176]
2. [Note 1117249 - Incomplete Registration of PI components in SLD|https://service.sap.com/sap/support/notes/1117249]
3. [Note 1292803 - Configuration Wizard: PI SLD Self Registration|https://service.sap.com/sap/support/notes/1292803] .
Regards,
Sunil Chandra

Adapter engine e Monitor de serviço da SEFAZ NFE 4.0 OFF

Sap Gears! Estou com um problema depois da atualização para NFE 4.0
Antes da atualização, o monitor de status estava ok
Foi feito atualização dos SPK, TPZ files no XI, Atualização JSPM (JAVA)
Também foi atualizado o APP do NFE e aplicado as notas correspondente ao SPK 16 (ainda não disponível )
Algum santo aqui teria um rumo pra eu seguir?
Agradeço ai pessoal!!!
<< Elabore melhor a questão e dê detalhes que sejam suficientes para entendermos o problema >>
Editado pela Moderação: Fernando Ros on Sep 29, 2010 5:36 PM
Veja Regras de Comportamento item 2

Raphael,
Quando você diz "Monitor de serviço da SEFAZ" você quer dizer o monitor do GRC (http://:80/sap/bc/webdynpro/xnfe/nfe_main)? Se sim, quando você tenta acessar, ocorre um erro?
Se sim, verifique na transação SICF se os servicos do nó default_host -> sap -> bc -> webdynpro (e seus sub-nós) estão ativos.
Quando você diz Adapter Engine, significa que, ao entrar no RWB, Component Monitoring, o Status dele aparece como vermelho, indicando no "Self-test" que o item "Is the Adapter Engine running?" está vermelho?
Se sim, dê uma olhada no defaultTrace em busca de erros.
BTW, poste mais detalhes dos problemas para que fique mais claro onde é o problema.
[]'s

Guide for J2EE Adapter Engine on WAS 6.40 with XI 3.0

Hi all,
we are currently struggling with our AE. We are going to migrate from Xi 2.0 to XI 3.0, we run into problems while configuring our old J2SE AE (for which I have found a good PDF document on the SAP Service Marketplace).
Now we would like to test/configure the J2EE AE on XI 3.0.
But I cant find any guide for this on the SAP Service Marketplace. Does anyone know where to find this?
Thanks
Nesimi Buelbuel

Hi Nesimi,
There is a webinar replay of "Troubleshooting the J2EE Adapter Engine" at
https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d
Also make sure you check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars/configuring a local adapter engine.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/configuration guide - sap xi 3.0.pdf
Regards,
Sridhar

Adapter Engine / Integration Server Problem

Hi,
I'm new to SAP and I have some questions regarding my new PI 7.0 SP10 setup.
Problem:
In Integration Directory, when I tried to define a communication channel, after specifying the "Adapter Type" (File in my case), I had to specify the "Adapter Engine" from a drop-down. But the dropdown list is empty!
What I've done & Observations:
1. I've recently imported the file "XI7_0_SAP_BASIS_7.00_06_00.tpz" (From the installation DVD). After importing, I've refreshed the SLD cache.
2. SLDCHECK reveals that the connection to SLD is successful.
3. RWB component monitoring shows:
    Integration Server - No light (Node cannot be expanded)
    Integration Engines - No light (Node cannot be expanded)
    Non-Central Adapter Engines -
        Adapter Engine ootspdbs02 (Red Light)
          - Self Test Failed - Details: Client 010 is not available in this system.
          - Cache Connectivity Test:
            Attempt to fetch cache data from Integration Directory failed; cache could not be updated
            [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.ootspdbs02, string], target element type: SAP_BusinessSystem)
    J2SE Adapter - No light (Node cannot be expanded)
    Tools
        - System Landscape Directory ootspdbs02 (Green Light)
        - Integration Directory ootspdbs02 (Green Light)
        - Integration Repository ootspdbs02 (Green Light)
        - Runtime Workbench ootspdbs02 (Green Light)
4. In my SLD - I've defined a business system PI_BS_01
    Role: Integration Server
    Pipeline URL: http://OOTSPDBS02:8001/sap/xi/engine?type=entry
    Group - No Group Assigned.
    Client: 001 of PI1
    Technical System: PI1 on ootspdbs02 - Release 700
Given the above observations, can anyone please point out to me where I went wrong?
Any advise is greatly appreciated.
Thank you.
Best Regards,
Ron Lai

Hi Archana,
The configuration in SLD DataSupplier is:
Latest Send Activity
     2007/01/04 09:18:09:564
Used HTTP Parameters [http host:port] [user] [protocol]
     [ootspdbs02:50100] [SLDDSUSER] [http]
Sending Node [nodeID] [hostname]
     [11621750] [ootspdbs02]
Send Result
     Success
Next Automatic Send Timestamp
     2007/01/04 21:18:08:189
Send Type
     Automatic (Time Scheduled)
Configuration Status
     Valid
The hierarchy of this business system is:
Business System:
   BS_NAUTICUS_OOTS [Role = Application System, Related Integration Server = PI1_BS_01, Technical System = TS_NAUTICUS_OOTS]
Technical System:
   TS_NAUTICUS_OOTS [Type = Third Party, Software Component = SWC_NAUTICUS_OOTS, Product = Product_NAUTICUS_OOTS]
Basically I created product, software component, technical system, business system from scratch.
I did not put any dependencies to existing products/software components.
Regards,
Ron

How to delete / cancel messages in PI adapter engine

Hello expert,
we have a scenario File (EOIO) --> PI --> ABAP. Today the file we received is big (>100mb), apparently PI can't handle it, and we got error
Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException:
Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.
seems like PI adapter engine got problem while delivering the huge message to ABAP integration engine. In RWB message monitoring, the message is set to Error. Unfortunately the file has been picked up many times, thus the huge message is stuck in adpater engine. In RWB message monitoring, I can see the message listed many times and status is HOLDING because the previous message can not be delivered to Intergration engine. I want to delete/cancel all the messages, I tried in RWB message monitoring to cancell the messages, however after cancelling one message, it crashed the PI system and cause a reboot.
My question is; Is there some place in NWA (net weaver admin) to force all the messages to be deleted? (Because deleting/cancel in RWB message monitoring does not work because it causes system crash).
Thanks
Jayson

Hi Team,
I couldn't able to delete old message's from one of Q system, Persistence layer is 584 % filled, after triggering delete job(RSXMB_DELETE_MESSAGES) and Persistence layer has come to 384% and further I couldn't able to delete old messages.I executed program "
                                                                                                      RSXMB_CHECK_MSG_QUEUE" and manage to delete few entries.Could you please suggest how to reduce fill level to below 100%
Switch Procedure (for Persistence Tables) Deactivated
Number of Table Entries
3.185.992
Maximum Number of Table Entries
830.000
Current Fill Level in %
384
Threshold value for fill level for executing a switch run in %
60
Number of Logically Deleted Table Entries
0
Decline of Fill Level in % Following Deletion
384
Delete or archive processed XML messages
Job log overview for job:    SAP_BC_XMB_DELETE_001 / 06302000
Date       Time     Message text                                                                               Message class Message no. Message
13.03.2013 06:39:55 Job started                                                                                     00           516          S
13.03.2013 06:39:55 Step 001 started (program RSXMB_DELETE_MESSAGES, variant &0000000000034, user ID SAPBATCH)      00           550          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ASYNC: 1                                        XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ROWS: 100                                       XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-IDX5_DELAYED: 0                                 XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-ROWS_PER_LOOP-DELETE: 100                                       XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-ASYNC: 007                                     XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-SYNC: 007                                      XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR-SYNC: 007                                XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-IDX5: 007                                      XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-ASYNC: D                                  XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-SYNC: D                                   XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR_UNIT-SYNC: D                             XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-IDX5: D                                   XMS_ADM        375          S
13.03.2013 07:27:58 0 XML messages deleted                                                                        XMS_ADM        351          I
13.03.2013 07:27:59 Step 002 started (program RSXMB_TABLE_SWITCH, variant &0000000000034, user ID SAPBATCH)         00           550          S
13.03.2013 07:28:00 Job finished                                                                                    00           517          S

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

Tcodes ralated to Adapter Engine in XI

Similar Messages

Maybe you are looking for