TCP/IP connections over Bluetooth

I am trying to connect two devices using TCP/IP over bluetooth; two Macs or one Mac and one other Linux based device. I have found a solution using mRouter which was part of SyncServices but was removed in 2005 (Security Update 2005-004) due to a buffer overflow exploit and mRouter is no longer available (its developer, Intuwave, has disappeared as well).
I'm pretty sure that there has to be a way of doing this but I have failed to find it. Yes I know I could use Wifi or a cable but this particular project requires it to be done via bluetooth. Anyone got any ideas?
TIA

Refer to this links, might be helpful to you
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/mysap3/sap109.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
http://www.topxml.com/biztalkutilities/walkthroughs/SAP%20Configuration.pdf#search=%22sap%20sm59%20program-id%22
Regds
Manohar

Similar Messages

  • My ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

    my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

    Hi
    Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
    Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
    On the other had ipad is connecting to other iPhone but only not mine.
    Still showing ipad not supported message. And also shows not paired.
    Please help.

  • Sharing internet connection over bluetooth

    i have 2 computers less than 10 metres apart, one of which is connected to the internet broadband. the solution for sharing the connection wirelessly with this particular setup is rather expensive.
    i was wondering if it would be possible to share the internet connection on the computer that has it over bluetooth with the other computer.
    i read an archived response suggesting that it was. can someone confirm?
    just to be clear:
    i hoping to have 2 computers bluetooth connected the second of which will be able to connect to the internet via the 1st computers connection.

    While it is not explicitly supported by OS X, both machines can be configured to do this. For lots of reasons, I don't think that this is a good idea. Your Bluetooth link is so slow compared to either a wireless—or even much faster terrestrial—ethernet link, that it's not worth the effort to enable this service.
    Save yourself a great deal of grief and disappointment, and get ahold of a relatively inexpensive ethernet gateway [wired or wireless] and set up a small local area network. You will be far more secure, and enjoy a far better level of performance than you would see if you attempted to create a Bluetooth LAN.
    That said, here is a set of instructions for enabling internet sharing using Terminal commands. It's paraphrased from…
    http://www.macgeekery.com/hacks/pppoverbluetooth
    In the Bluetooth preference pane's sharing tab, make a new Serial Port Service and name it bt-ppp and make it an RS-232 device. If it's on, disable internet sharing in the Sharing prefpane. Then create the following script [shown below.]
    The script starts pppd on the new Bluetooth serial device you've created, then sets up IP forwarding, NAT, and the like. The en0 can be replaced with en1 if your primary net connection is AirPort. You can change the IP listed to something appropriate for your network, as well. If you put it in the range of IPs you're already using for your home network, natd is smart enough to work as a router instead of a gateway. Run as root, but—for the love of all that is holy and just—use sudo instead of su.
    This is the script you must run in terminal:
    /usr/sbin/pppd /dev/tty.bt-ppp 115200 noauth local passive proxyarp asyncmap 0 silent persist :10.1.1.25 &
    /usr/sbin/sysctl -w net.inet.ip.forwarding=1
    /usr/sbin/natd -same_ports -use_sockets -log -deny_incoming -interface en0
    /sbin/ipfw add divert natd ip from any to any via en0
    If you are unfamiliar with issuing commands from the Terminal or are not familiar with what these unix commands mean, I would suggest that you proceed very cautiously, and do more research before attempting this.

  • Pan connection over bluetooth

    hi
    is it possible to implement pan connection (tcpip) over bluetooth
    using sun java wireless toolkit ? , i know that nokia implementation of jsr-82
    don't a low it !
    nimco

    You can tether the phone to the laptop if your provider supports it to share your internet connection on the phone to the laptop, but the only way to do it the other way around is if you were to create a wifi network with the laptop and select it in the phone and use the phone on it. You cannot connect the iPhone to the Mac via bluetooth to share the Mac's internet connection.

  • IPhone and IMac Will Not Connect Over Bluetooth

    I've had an Iphone for a while and recently purchased an Imac. I've been trying to get my Iphone and Imac to synch through Isync over the bluetooth connection to sync the contacts on my I phone with the Imac. The Imac discovers and recognizes the Iphone, I enter the passkey to pair the 2 and then I get this message: "There were no configurable services found on your device."
    If anyone has any suggestions on how to get past this I would appreciate it.
    Paulg

    Firstly, you can't sync an iPhone over Bluetooth - that's why it won't work. Only via USB cable.
    Secondly, you use iTunes for syncing iPhones, not iSync.
    Bluetooth in the iPhone is for Bluetooth headsets, nothing else.

  • E90 connection over bluetooth to Tomtom go720

    Anyone help ? It connects via bluetooth automatically but disconnects if I let it go into standby mode then reconnects again but when going back to standby it disconnects again

    Hi there
    I happened to find the cause, I believe myself.
    I experienced repeating error 'Cannot Authorize Phone', giving Failed in an unknown error: 0x'8007048F'.
    So here is what I found.
    I decided to :
    Uninstall PC Nokia Suite, by using the PC Suite Cleanup tool
    Unpaired my E52 Phone
    Cold Started my Nokia E52 Phone, having the battery reinserted
    Installed PC Nokia Suite (currently 7.1.60.0)
      I observed a short message on phone stating ' Not enough space on C:' which I tried to resolve. But I could not free more than 0.3 MB
    I Paired and Authorization went well !
    And the rest of PC Nokia setup for sync went straight, and it worked !
     So the question I have, staying in my head, is:
     Why is the C-drive on my Nokia E52 taking up this space...
    According to FileManager on E52, says 8.5MB is free (does not tell how much there is in total)
    According to Nokia Phone Browser (from PC), the folders on C: (my phone) makes up 35 files with 1.2 MB of space
    Nokia Phone Browser (from PC) says on properties on C: (my phone): Total Size 59.05 MB Free Space: 5.83 MB
    and as you can see, somewhat inconsistent reporting of space usage. Clearly, there's hidden files (the OS Boot image for Symbian I guess) but why is the OS clobbering up space, giving problems for BlueTooth sesssions ? Could it be pagefiles and memory leaks ?
    Well, now my immediate problem was solved, until further...

  • Ovi Player connect over Bluetooth

    How do I connect Ovi Player using a Bluetooth connection?

    The Ovi Player cannot use Bluetooth connection at all, whether this will change remains to be seen.
    Ovi Player needs the phone connected to the PC using Media ransfer mode, I'm not sure if this mode is even compatible with Bluetooth which may be the reason.

  • Voice connectivity over bluetooth lost for nokia x...

    I had purchased nokia x6 around 3 months ago. Till yesterday, I was able to pair the X6 device with my bluetooth headset and also my car bluetooth device and everything was working fine.
    Suddenly now, the device is able to pair with headset or car kit but absolute no voice is being heard through both channels. Phone without the bluetooth works absoolutely fine.
    I am not able to listen to any music, voice, phone call or any sound at all once the phone is paired with any bluetooth device(bluetooth headset or car kit).
    What can be the possible reason and solution? Please suggest urgently
    Thanks
    Vishal

    No replies yet ???
    Plssssss
    Need help desperately.

  • TS1398 I have connected my iPad 2 to my Mac Air over blue tooth.  Booth say they are connected to each other.  But I can not access the internet on the IPAD.  I can connect over blue tooth from my iPhone to my iPad with no issue.  Any thoughts?  Thank you

    I am trying to connect my Ipad 2 to my Mac Air over bluetooth.
    I can connect them to each other, and both machines say they are connected over bluetooth.
    However I can not access the internet on the Ipad...says it is not connected to the internet.
    Does anyone know if you can fix this?
    THank you

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • My iPhone 5 won't connect to my macbook pro retina over bluetooth?

    My iPhone 5 won't connect to my macbook pro retina over bluetooth?

    Ah, sure it actually won't.  I have the same problem, and I contacted Apple Support.  They told me that there is an incompatability between the iphone 5 and MacBook Pro Retina such that Bluetooth pairing is not possible.
    The Support Agent actually had the audacity to tell me this was part of the design of the OS on the MacBook Pro, like Windows people saying, "That's not a bug.  It's a feature!!"
    Personally, I think this is insane.  While I was trying to tether the iphone to the MacBook Pro retina for an internet connection, there are other reasons related to file transfers for which one would want to pair the iphone 5 with the MacBook Pro retina.
    I am hoping this "feature" is fixed in iOS 7, and/or in some dot release of Mac OS 10.8.
    By the way, the personal hotspot feature on my Verizon iphone 5 works great either via a wifi or USB connection.  There are occaisions, however, when one would 1) not have a USB cable, and/or 2) have another wifi relationship between the phone and a network that one would not want to have to "forget" in order for it not to connect to that wifi network.  The Macbook will not find the iphone as a wifi hotspot if the iphone is connected to wifi in the first place.  At least mine won't.
    WWSJS???  What Would Steve Jobs Say???!!!
    OZones

  • How do I transfer music from my iPod to my iPad? Thought I could do it over bluetooth but seems they won't connect.

    How do I transfer music from my iPod to my iPad? Thought I could do it over bluetooth but seems they won't connect.

    jalsie wrote:
    How do I transfer music from my iPod to my iPad? ...
    By using iTunes on your computer...Syncing with iTunes

  • Do you have to have Internet connection to connect iPhone to Apple TV over Bluetooth?

    Do you have to have Internet connection to connect iPhone to Apple TV over Bluetooth?

    AppleTV does not connect to a phone via bluetooth.
    It has wifi and ethernet networking only.

  • Any way to connect my palm to my laptop over bluetooth and have internet in my palmcentro

    sorry but I have little knowledge on cell phones, I have a Palm Centro and I wonder if there's any way to connect my palm to my laptop over bluetooth and have internet in my palmcentro, I had sprint in usa but now I'm Ecuador and I'm ussing another company called alegroo and the internet is very expensive.
    please can someone help me
    Post relates to: Centro (Sprint)
    Post relates to: Centro (Sprint)

    Yes, this can be done with a purchase of "Softick PPP" found here:
    http://www.softick.com/ppp/
     WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Can't connect N73 to PC over bluetooth

    I can't connect N73 to PC over bluetooth with new Nokia PC Suite v6.84.10.4, I get this message "Cannot use the connection type. Check that all the needed hardware,software and drivers are available". This happened after I instaled new version of PC Suite and the patch to v6.84 didn't help.

    I think the problem is in bluesoleil software It looks like PC Suit does not work with latest IVT Bluesoleil version 3.2.2.8. I tried with and witout patch and I even installed older version of PC Suite that worked before with older version of bluesoleil....

  • I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

Maybe you are looking for

  • G3 Wallstreet, 10.2.8. Trouble with FireWire HDD.

    Hi! I have G3 Wallstreet (233Mhz, 384 MB RAM, 4Gb HDD) witn Jaguar 10.2.8 and PCMCIA-> FireWire adapter. I try connect my external HDD (external box for 2 HDD with USB, FW400, FW800 + SATA HDD ~600 Gb) to this Mac. In "About ths mac" I see FireWire a

  • Event ID:7405 Sql reporting services

    Hi, I received a SMS_SRS_Reporting_Point failing with 7405 on the component status failure message like this: Event ID:7405 SQL reporting services root folder "ConfigMgr_CM3" is not present or not properly configured on the reporting point server. On

  • Sender content conversion problem

    Hi all, I am working on a file>XIrfc scenario. I need to convert the simple structure flat file to xml file. Flat file format 74723123-45-678902100977      00000000001130200800000      M                  N i have done below configuration, DT_BNI1012.

  • Counting records

    i have two tables like master and child having below records.Please find the records. Master table No STATUS ABC U ABC S ABC S ABC B ABC I ABC B Histrory Table CODE status ABC S ABC B ABC I ABC F ABC U The result should be the total count based on bo

  • File Importer Problem

    I am working with footage from a DVD converted by a program called "Handbrake" into MP4.The message: "File importer detected an inconsistency in the file structure of [file name]" appears in the events monitor (yellow triangle bottom right of workspa