TCP/IP does not let me enable or disable.

Hi,
I am trying to enable TCP/IP in order to access my SQL server remotely but when I select tcp/ip and want to enable = Yes or disabled = no it does not give me the option, it appears a gray empty rectangle.
Any idea what might happen?, I will like to post a picture but it does not let me at the moment
Thank you,

This one may help.
Enable Named Pipes and TCP/IP Connections
Might also ask them over here.
SQL Server forums on MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

JCOerror: This system does not let you log on using a password

Hi,
"JCOerror: This system does not let you log on using a password"
This is the error message I get from MII tries to connect to the Production ECC using my credentials to perform a BAPI call.
These credentials work fine interactively (using the SAP GUI) and for BAPI calls from MII on SAP Development instances.
I can interpret this message in two ways:
- My login can not log on using password (though I can interactively)
- The server does not allow logging on using password only. (It might require to pre-authorize the connecting server as well).
I guess my question can be if this error requires adding additional rights to my login for the production environment, or if this is a global SAP setup for this system? Or something else?
In either way, what is required to have this work?
Thanks.

Hi,
Kindly try the following options.
Try executing the BAPI seperately in se37, using your login credentials.
Check whether RFC is enabled for the BAPI.
Check whether the SAP server is details are furnished correctly in "SAP Server"(available under "Data Services") editor.
We can ensure this by checking the connection status link in xMII.(Link is available under "Data Services").
If connection status is "Running" then SAP server setting configuration is fine. Else it is not configured properly.
Try executing the BAPI in BLS(Business Logic Services) using JCO connector.
I believe if any one of these scenarios fail then "Proxy Error" might thrown.
Thanks
Rajesh Sivaprakasam

IviDCPwr Configue OVP.vi does not work when enabled is set to true.

There is an IviDCPwr [MSR] - Output DC Volts.vi example in Labview 2009. There is IviDCPw Configure OVP.vi which is used for enabling or disabling the OVP limit feature. I have tested this VI with E3631A this power supply does not support OVP enable so this parameter is set to false and the VI works fine.
When testing with N5749A, this parameter needs to be true since this power supply does not support OVP disable. There is an error being generated with this VI. If I remove this VI , the default limit value is 100 and the VI is working fine and setting the current and voltage without any issue.
Could anyone let me know if they have faced any similar problem and how it can be solved.
Best Regards
Anshul

Hello Anshul,
Can you please post more information about the error that is being generated? Also, please see if the problem appears when the N5749A IVI Specific driver is in simulation mode.
Cheers,
NathanT

This system does not let you log on using a password

hi all, i am very new to sap basis. i have changed the below profile parameters in RZ10.
login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
after changing values i restarted the Instance. But the problem is when i am trying to login to the system it is showing an error message : "This system does not let you log on using a password". I know why this error occurs...
but how to resolve this error? plz Help.
Thanks in advance

login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
The correct parameter for Min password Lenght is login/min_password_lng.
You can change this at OS level restart and see how it goes...
Regards
Juan

Aperture ate my picture files and they are not recoverable. The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall. But Purchases says it is "Installed" so it does not let me download it again. HELP!!!!

Aperture ate my picture files and they are not recoverable. The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall. But Purchases says it is "Installed" so it does not let me download it again. HELP!!!!

I typed Aperture into Spotlight and sure enough it did show up.
It looks like it is supposed to be in Apps.
But it is not there.
So I clicked on the spotlight Aperture and it opened up the App!!!!
But I do not know where it is to move it!
How can I find it?
While Aperture is running and you are seeing it in the Dock, ctrl-click (or right click) the Dock icon.
You will see a contextual menu. Click on "Options", then select "Show in Finder".
And check the "keep in Dock" mark, so you will not lose it from the Dock.

My itouch does not let me download apps

my itouch does not let me download any apps.how do i fix this?

Need more information. Like what happens when you try?

My mac book pro just stopped allowing sound and when i restarted it, it does not let me use any of the icons on the desktop, then allows me to use them after 3 minutes,and then still NO SOUND! What do i do? PLEASE help.

I have an issue with my computer. the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011. so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out. When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT it is a light gray color and it does not let me check the setting off. please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
*******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

When i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account?

when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?

Hi
I would try this since Apple TV is built to allow multiple Apple Ids
On you Apple TV
General > Settings >Itunes Store > Add New Account (put yours in here)
Then Switch account to your Apple Id
Cheers

In my macbook pro sees in the screen very wide a vertical black bar and it does not let see what this underneath that bar

in my macbook pro sees in the screen very wide a vertical black bar and it does not let see what this underneath that bar

Take it in for service. Your screen probably needs to be replaced.

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to!

I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music

Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!

What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.

I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

I am restoring the data from my itunes account to a replacement ipod touch. After all is finished in my laptop through itunes the ipod stays on the same page and does not let me finish the process, wht shoul i do?

I got a replacement ipod and did the restore data through itunes with its sync in my laptop, however, after itunes process is finished the ipod does not let me choose to continue or to finish the process, what should I do?,

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS2972 My Apple TV does not let me see vídeos from my Apple devices (iPhone And iPad), but is working Good with pictures And audio in internet radio transmited from my iPhone And my iPad

My Apple TV does not let me see vídeos when transmiting from my iPad And iPhone, however let me listen music And see the pictures when transmiting from theese devices.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

TCP/IP does not let me enable or disable.

Similar Messages

Maybe you are looking for