TCP/IP Login unable to find Context

A Client is running a mixture of Netware Servers (5.1 and 6.5) and last
week, some windows 98 machines running the latest version of the client
were able to see the Tree, but unable to find the Context or Servers. If I
moved the clients to IPX, everything works OK, but where some windows XP
machines will log in OK using TCP/IP, I cannot get others to do so unles
there is the IPX protocoal as well. I have changed the switches, rebooted
the servers, checked there is Small ECB, pulled my hair out etc. Even
though the client cannot login into the network, it can still connect
using TCP/IP to the groupwise mail box. Some times, however, I have got a
log in to work, and it seems to be OK after that. Lose it if ther servers
are rebooted.
Any ideas anyone?
Regards,
ChasR.

Sorted!!
I disconnected each of the servers from the network in turn by unplugging
the network cable. I found that I could access the context each time when
one of the files servers was out of the system. As soon as I reconnected
the particular server, everything went wrong again. I presumed that the
TCP/IP protocol stack was in some way corrupted, so I went into inetcfg
and disabled the tcp/ip binding and reinitialized the networking
components. I could then find the context when the server was plugged into
the network. I then went in again to inetcfg and enabled the tcp/ip. After
reinitializing the system, everything worked fine.
I still do not know what caused the problem, but am glad it is OK again.
ChasR.

Similar Messages

  • Unable to find class oracle.panama.personalization.login

    oracle.jsp.parse.JspParseException: Line # 21, Error: Unable to find class for bean: login defined by tag with class: oracle.panama.personalization.login
    I get this message when trying to go to "http://{hostname}/papz/login.jsp"
    window 2k, Oracle 8.1.7, 9iASwe 1.0.2.0.0.
    Any help would be great.
    Thanks in advance
    Sean.

    I'm also having this problem. Could really use some help

  • [Solved] Unable to find root device

    Hi guys,
    it's been three days now that my laptop refuses to boot with a message from systemd like this:
    ERROR: device 'UUID=xxx...' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=xxx...'.
    You are being dropped to a recovery shell.
    That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
    But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
    I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
    In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
    It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
    However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
    [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
    [ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
    [ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
    [ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] log_buf_len: 1048576 bytes
    [ 0.000000] early log buf free: 519600(99%)
    [ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
    [ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
    [ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21edfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
    [ 0.000000] On node 0 totalpages: 1997309
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12786 pages used for memmap
    [ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18360 pages used for memmap
    [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2593.984 MHz processor
    [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140926
    [ 0.020437] ACPI: All ACPI Tables successfully acquired
    [ 0.021107] Security Framework initialized
    [ 0.021114] Yama: becoming mindful.
    [ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024297] Initializing cgroup subsys memory
    [ 0.024302] Initializing cgroup subsys devices
    [ 0.024304] Initializing cgroup subsys freezer
    [ 0.024305] Initializing cgroup subsys net_cls
    [ 0.024307] Initializing cgroup subsys blkio
    [ 0.024325] CPU: Physical Processor ID: 0
    [ 0.024326] CPU: Processor Core ID: 0
    [ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025227] mce: CPU supports 7 MCE banks
    [ 0.025238] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.026009] ftrace: allocating 20921 entries in 82 pages
    [ 0.033432] dmar: Host address width 39
    [ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
    [ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
    [ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.033572] HPET id 0 under DRHD base 0xfed91000
    [ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
    [ 0.033573] This will slightly decrease performance.
    [ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.033713] Enabled IRQ remapping in xapic mode
    [ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
    [ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
    [ 0.067366] TSC deadline timer enabled
    [ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067404] ... version: 3
    [ 0.067405] ... bit width: 48
    [ 0.067406] ... generic registers: 4
    [ 0.067407] ... value mask: 0000ffffffffffff
    [ 0.067407] ... max period: 0000ffffffffffff
    [ 0.067408] ... fixed-purpose events: 3
    [ 0.067409] ... event mask: 000000070000000f
    [ 0.090846] x86: Booting SMP configuration:
    [ 0.090848] .... node #0, CPUs: #1
    [ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.111723] #2 #3
    [ 0.146545] x86: Booted up 1 node, 4 CPUs
    [ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
    [ 0.149839] devtmpfs: initialized
    [ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
    [ 0.152488] pinctrl core: initialized pinctrl subsystem
    [ 0.152525] RTC time: 14:27:35, date: 01/29/15
    [ 0.152613] NET: Registered protocol family 16
    [ 0.163220] cpuidle: using governor ladder
    [ 0.176565] cpuidle: using governor menu
    [ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.176606] ACPI: bus type PCI registered
    [ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.176776] PCI: Using configuration type 1 for base access
    [ 0.176783] dmi type 0xB1 record - unknown flag
    [ 0.190254] ACPI: Added _OSI(Module Device)
    [ 0.190257] ACPI: Added _OSI(Processor Device)
    [ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
    [ 0.527048] ACPI: Dynamic OEM Table Load:
    [ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.540534] ACPI: Dynamic OEM Table Load:
    [ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.553725] ACPI: Dynamic OEM Table Load:
    [ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.607146] ACPI: Interpreter enabled
    [ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.607184] ACPI: (supports S0 S3 S4 S5)
    [ 0.607185] ACPI: Using IOAPIC for interrupt routing
    [ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.608649] ACPI: Power Resource [PG00] (on)
    [ 0.620317] ACPI: Power Resource [PG01] (on)
    [ 0.640702] ACPI: Power Resource [PG02] (on)
    [ 1.401836] ACPI: Power Resource [FN00] (off)
    [ 1.401913] ACPI: Power Resource [FN01] (off)
    [ 1.401986] ACPI: Power Resource [FN02] (off)
    [ 1.402057] ACPI: Power Resource [FN03] (off)
    [ 1.402127] ACPI: Power Resource [FN04] (off)
    [ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 1.404193] PCI host bridge to bus 0000:00
    [ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
    [ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
    [ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
    [ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
    [ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
    [ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
    [ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
    [ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
    [ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
    [ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
    [ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
    [ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
    [ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
    [ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
    [ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
    [ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
    [ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
    [ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
    [ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
    [ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
    [ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
    [ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.614019] vgaarb: loaded
    [ 1.614020] vgaarb: bridge control possible 0000:00:02.0
    [ 1.614099] PCI: Using ACPI for IRQ routing
    [ 1.615308] PCI: pci_cache_line_size set to 64 bytes
    [ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
    [ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
    [ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
    [ 1.615428] NetLabel: Initializing
    [ 1.615429] NetLabel: domain hash size = 128
    [ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.615438] NetLabel: unlabeled traffic allowed by default
    [ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.617497] Switched to clocksource hpet
    [ 1.621576] pnp: PnP ACPI init
    [ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 1.621755] system 00:00: [io 0xffff] has been reserved
    [ 1.621756] system 00:00: [io 0xffff] has been reserved
    [ 1.621758] system 00:00: [io 0xffff] has been reserved
    [ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
    [ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.001167] pnp: PnP ACPI: found 8 devices
    [ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
    [ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 2.007594] NET: Registered protocol family 2
    [ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
    [ 2.008100] TCP: reno registered
    [ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008195] NET: Registered protocol family 1
    [ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
    [ 2.024532] PCI: CLS 64 bytes, default 64
    [ 2.024577] Unpacking initramfs...
    [ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
    [ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
    [ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.341843] Scanning for low memory corruption every 60 seconds
    [ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 2.342061] Initialise system trusted keyring
    [ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.343277] zpool: loaded
    [ 2.343280] zbud: loaded
    [ 2.343434] VFS: Disk quotas dquot_6.5.2
    [ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.343557] msgmni has been set to 15200
    [ 2.343599] Key type big_key registered
    [ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.343779] io scheduler noop registered
    [ 2.343781] io scheduler deadline registered
    [ 2.343802] io scheduler cfq registered (default)
    [ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
    [ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.344363] vesafb: scrolling: redraw
    [ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
    [ 2.492136] Console: switching to colour frame buffer device 240x67
    [ 2.639261] fb0: VESA VGA frame buffer device
    [ 2.639278] intel_idle: MWAIT substates: 0x11142120
    [ 2.639279] intel_idle: v0.4 model 0x45
    [ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.639471] GHES: HEST is not enabled!
    [ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.639854] Linux agpgart interface v0.103
    [ 2.639890] rtc_cmos 00:01: RTC can wake from S4
    [ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.640037] Intel P-state driver initializing.
    [ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.640415] TCP: cubic registered
    [ 2.640635] NET: Registered protocol family 10
    [ 2.641104] NET: Registered protocol family 17
    [ 2.641809] Loading compiled-in X.509 certificates
    [ 2.641841] registered taskstats version 1
    [ 2.642839] Magic number: 15:558:486
    [ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
    [ 2.643157] PM: Hibernation image not present or could not be loaded.
    [ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 2.645137] Write protecting the kernel read-only data: 8192k
    [ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
    [ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
    [ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
    [ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
    [ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
    [ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
    [ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
    [ 2.657455] systemd-udevd[61]: starting version 218
    [ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
    [ 2.657510] systemd-udevd[61]: Load module index
    [ 2.657562] systemd-udevd[61]: Created link configuration context.
    [ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
    [ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
    [ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
    [ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    [ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    [ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    [ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    [ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    [ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    [ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
    [ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    [ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
    [ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
    [ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
    [ 2.658188] systemd-udevd[61]: Unload module index
    [ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
    [ 2.658262] systemd-udevd[62]: set children_max to 16
    [ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
    [ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
    [ 2.660575] systemd-udevd[67]: seq 678 running
    [ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
    [ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.660651] systemd-udevd[67]: seq 678 processed with 0
    [ 2.714860] raid6: sse2x1 9342 MB/s
    [ 2.771561] raid6: sse2x2 11848 MB/s
    [ 2.828260] raid6: sse2x4 13887 MB/s
    [ 2.884943] raid6: avx2x1 18356 MB/s
    [ 2.941655] raid6: avx2x2 21230 MB/s
    [ 2.998344] raid6: avx2x4 24583 MB/s
    [ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
    [ 2.998346] raid6: using avx2x2 recovery algorithm
    [ 2.998547] xor: automatically using best checksumming function:
    [ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
    [ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 2.998639] systemd-udevd[67]: seq 679 running
    [ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
    [ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.998684] systemd-udevd[67]: seq 679 processed with 0
    [ 3.031698] avx : 25444.800 MB/sec
    [ 3.034144] systemd-udevd[62]: Validate module index
    [ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
    [ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
    [ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034249] systemd-udevd[67]: seq 680 running
    [ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
    [ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034308] systemd-udevd[67]: seq 680 processed with 0
    [ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
    [ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034945] systemd-udevd[67]: seq 681 running
    [ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
    [ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034986] systemd-udevd[67]: seq 681 processed with 0
    [ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
    [ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035087] systemd-udevd[67]: seq 682 running
    [ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
    [ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035118] systemd-udevd[67]: seq 682 processed with 0
    [ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
    [ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035790] systemd-udevd[67]: seq 683 running
    [ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
    [ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
    [ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035834] systemd-udevd[67]: seq 683 processed with 0
    [ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
    [ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
    [ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035961] systemd-udevd[67]: seq 685 running
    [ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
    [ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
    [ 3.035981] systemd-udevd[75]: seq 684 running
    [ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.036004] systemd-udevd[67]: seq 685 processed with 0
    [ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
    [ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036031] systemd-udevd[75]: seq 684 processed with 0
    [ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
    [ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
    [ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
    [ 3.036165] systemd-udevd[76]: seq 686 running
    [ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036180] systemd-udevd[75]: seq 688 running
    [ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
    [ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
    [ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
    [ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036215] systemd-udevd[75]: seq 688 processed with 0
    [ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036231] systemd-udevd[76]: seq 686 processed with 0
    [ 3.036257] Btrfs loaded
    [ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
    [ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
    [ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
    [ 3.036378] systemd-udevd[77]: seq 689 running
    [ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
    [ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
    [ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036439] systemd-udevd[77]: seq 689 processed with 0
    [ 3.036457] systemd-udevd[76]: seq 691 running
    [ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
    [ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036498] systemd-udevd[76]: seq 691 processed with 0
    [ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
    [ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
    [ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036576] systemd-udevd[76]: seq 693 running
    [ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
    [ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
    [ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
    [ 3.036619] systemd-udevd[76]: seq 693 processed with 0
    [ 3.036637] systemd-udevd[77]: seq 694 running
    [ 3.036649] systemd-udevd[78]: seq 692 running
    [ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
    [ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036676] systemd-udevd[77]: seq 694 processed with 0
    [ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
    [ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.036698] systemd-udevd[78]: seq 692 processed with 0
    [ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
    [ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
    [ 3.036801] systemd-udevd[80]: seq 695 running
    [ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
    [ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.036848] systemd-udevd[80]: seq 695 processed with 0
    [ 3.036859] systemd-udevd[76]: seq 696 running
    [ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
    [ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
    [ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
    [ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
    [ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
    [ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036992] systemd-udevd[76]: seq 696 processed with 0
    [ 3.037009] systemd-udevd[67]: seq 687 running
    [ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
    [ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037048] systemd-udevd[67]: seq 687 processed with 0
    [ 3.037063] systemd-udevd[75]: seq 690 running
    [ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
    [ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.037097] systemd-udevd[75]: seq 690 processed with 0
    [ 3.037372] udevadm[79]: calling: trigger
    [ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
    [ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
    [ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
    [ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
    [ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
    [ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
    [ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
    [ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
    [ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
    [ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
    [ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
    [ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
    [ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
    [ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
    [ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
    [ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
    [ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
    [ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
    [ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
    [ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
    [ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
    [ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
    [ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
    [ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
    [ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
    [ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
    [ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
    [ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
    [ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
    [ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
    [ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
    [ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
    [ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
    [ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
    [ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
    [ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
    [ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
    [ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
    [ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
    [ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
    [ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
    [ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
    [ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
    [ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
    [ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
    [ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
    [ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
    [ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
    [ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
    [ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
    [ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
    [ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
    [ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
    [ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
    [ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
    [ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
    [ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
    [ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
    [ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
    [ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
    [ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
    [ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
    [ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
    [ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
    [ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
    [ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
    [ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
    [ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
    [ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
    [ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
    [ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
    [ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037890] systemd-udevd[67]: seq 697 running
    [ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
    [ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
    [ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
    [ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
    [ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037925] systemd-udevd[67]: seq 697 processed with 0
    [ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
    [ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037988] systemd-udevd[67]: seq 698 running
    [ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
    [ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038015] systemd-udevd[67]: seq 698 processed with 0
    [ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
    [ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038076] systemd-udevd[67]: seq 702 running
    [ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
    [ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
    [ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038106] systemd-udevd[67]: seq 702 processed with 0
    [ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
    [ 3.038113] systemd-udevd[78]: seq 703 running
    [ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
    [ 3.038143] systemd-udevd[80]: seq 704 running
    [ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
    [ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038158] systemd-udevd[78]: seq 703 processed with 0
    [ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
    [ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
    [ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038179] systemd-udevd[80]: seq 704 processed with 0
    [ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038192] systemd-udevd[67]: seq 705 running
    [ 3.038201] systemd-udevd[78]: seq 706 running
    [ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
    [ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
    [ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
    [ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038228] systemd-udevd[67]: seq 705 processed with 0
    [ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
    [ 3.038243] systemd-udevd[80]: seq 707 running
    [ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038246] systemd-udevd[78]: seq 706 processed with 0
    [ 3.038254] systemd-udevd[76]: seq 700 running
    [ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
    [ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038275] systemd-udevd[80]: seq 707 processed with 0
    [ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
    [ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038310] systemd-udevd[76]: seq 700 processed with 0
    [ 3.038325] systemd-udevd[75]: seq 699 running
    [ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
    [ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038364] systemd-udevd[75]: seq 699 processed with 0
    [ 3.038405] systemd-udevd[77]: seq 701 running
    [ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
    [ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038432] systemd-udevd[77]: seq 701 processed with 0
    [ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
    [ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
    [ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038623] systemd-udevd[81]: seq 708 running
    [ 3.038627] systemd-udevd[67]: seq 709 running
    [ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
    [ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
    [ 3.038653] systemd-udevd[75]: seq 710 running
    [ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
    [ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
    [ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
    [ 3.038671] systemd-udevd[67]: seq 709 processed with 0
    [ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
    [ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
    [ 3.038682] systemd-udevd[81]: seq 708 processed with 0
    [ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
    [ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038700] systemd-udevd[75]: seq 710 processed with 0
    [ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
    [ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038734] systemd-udevd[67]: seq 711 running
    [ 3.038753] systemd-udevd[76]: seq 713 running
    [ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
    [ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
    [ 3.038784] systemd-udevd[67]: seq 711 processed with 0
    [ 3.038797] systemd-udevd[75]: seq 712 running
    [ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038803] systemd-udevd[76]: seq 713 processed with 0
    [ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
    [ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038845] systemd-udevd[75]: seq 712 processed with 0
    [ 3.038849] systemd-udevd[77]: seq 714 running
    [ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
    [ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
    [ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038878] systemd-udevd[77]: seq 714 processed with 0
    [ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
    [ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
    [ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
    [ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
    [ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038976] systemd-udevd[75]: seq 719 running
    [ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
    [ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
    [ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
    [ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039004] systemd-udevd[75]: seq 719 processed with 0
    [ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
    [ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
    [ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039070] systemd-udevd[75]: seq 720 running
    [ 3.039078] systemd-udevd[76]: seq 721 running
    [ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
    [ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039094] systemd-udevd[75]: seq 720 processed with 0
    [ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
    [ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.039133] systemd-udevd[76]: seq 721 processed with 0
    [ 3.039146] systemd-udevd[67]: seq 715 running
    [ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
    [ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.039181] systemd-udevd[67]: seq 715 processed with 0
    [ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039224] systemd-udevd[77]: seq 722 running
    [ 3.039235] systemd-udevd[78]: seq 723 running
    [ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
    [ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
    [ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
    [ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.039267] systemd-udevd[77]: seq 722 processed with 0
    [ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.039277] systemd-udevd[78]: seq 723 processed with 0
    [ 3.039284] systemd-udevd[75]: seq 717 running
    [ 3.039288] systemd-udevd[76]: seq 718 running
    [ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
    [ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
    [ 3.039309] sys

    Guys, I think I've found the strange thing.
    First, in the recovery shell, when I type "lvm lvscan", it prints:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    and then it says that all four my logical volumes root,boot,home and var are inactive.
    So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
    I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
    The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
    Last edited by rdm (2015-01-29 21:55:44)

  • Problem with Java keystore and certificates (unable to find valid cert path

    Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
    "Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
    and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
    I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
    If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
    One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
    I use ip 1.1.1.1, import self signed certificate, authenticates successfully
    login with ip 2.2.2.2 import self signed certificate, FAILS
    login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
    Also, I am using java 1.5.0_03.
    Any help is greatly appreciated as I've been trying to figure this out for over a week now.
    Thanks

    Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
    I'm locking this thread now.

  • Unable to find security data

    Hello,
    I am trying a scenario file--> xi ---> RFC , does anybody know what this message means. The problem appear when I send a flat file to XI.  My question is, do I need to make some extra settings ?
    This is the error am getting.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Technical Routing
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="Intromoto_bus,zempiface/http://empinfo.com" p2="sap_bus,ZHRONBOARD_ACCEPT/urn:sap-com:document:sap:rfc:functions" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
      <SAP:Text language="EN">Technical routing: Unable to find security data for sender Intromoto_bus,zempiface/http://empinfo.com for receiver sap_bus,ZHRONBOARD_ACCEPT/urn:sap-com:document:sap:rfc:functions</SAP:Text>
      </SAP:ErrorHeader>
    Rgds,
    Ram Sri

    Hi,
    but then, the error message is very concise. The security object in the integration directory with the key:
    Send:
    Intromoto_bus
    zempiface
    http://empinfo.com
    Rec:
    sap_bus
    ZHRONBOARD_ACCEPT
    urn:sap-com:document:sap:rfc:functions
    is missing. You need to create it in the directory.
    Regards,
    Hermann

  • Unable to find security data for sender

    Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Technical Routing
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
      <SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
      </SAP:ErrorHeader>
    regards
    Ernesto Duran

    HI,
    i am also getting the same error in my scenario. Could u plz inform me what is the solution?
    Rgds,
    Ram Sri

  • Unable to find data visualization component in JDEV 11g Preview 4

    we have installed jdev11g preview 4 and we are unable to find ADF data visualization component.
    Is there anyway we could add this component.
    Thanks in Advance
    Sabir

    Hi,
    in the component palette (while having an ADF Faces page open), right click and then choose "Edit Libraries" from the context menu. Choose the DVT libraries and toggle them to the selected libraries. The DVT components should show now
    Frank

  • We are unable to find iTunes on your computer.  (iPhone)

    Trying to test in-app purchasing, so logged out of App Store, and now I cant log back in.
    I have connectivity, because I can browse web. My App Store account is still correct, because I can successfully log in using my iPad.
    The error message I get on my iPhone screen is weird, it says:
    *One Moment Please.*
    *Connecting to the iTunes Store.*
    Loading...
    *We are unable to find iTunes on your computer.*
    *[I have iTunes] [Download iTunes]*
    *If iTunes doesnt open, click the iTunes aplication login in Dock or Windows Task Bar.*

    Suddenly, I have fixed this problem by download a free apps from the link refer to. Now my App Store / iTunes Store in my iPhone has been recovered. Very strange!

  • Unable to find the path of automatic (command line) backup of LCM

    I created the batch script to take the LCM backup on Essbase/FDQM (ESB01)
    Detail is as under
    1. Copy utility.sh and utility.bat file from  D:\Oracle\Middleware\EPMSystem11R1\common\utilities\LCM\11.1.2.0\bin  to   D:\Oracle\Middleware\user_projects\epmsystem1\bin
    2. Generate the xml file (Login on Shared Service Console as admin user
    Application Group →  Foundation →  Shared Service  → Select All → Define Migration → Next → Enter File System Name → Next → Next → Save Migration Definition → Save the xml File
    3. D:\Oracle\Middleware\user_projects\epmsystem1\bin>type WeeklyMigration.bat
    utility.bat MigrationDefinition.xml
    4. First time have to run manual, It will store the credentials in xml file (MigrationDefinition.xml)
    D:\Oracle\Middleware\user_projects\epmsystem1\bin>WeeklyMigration.bat
    >>> Enter username - admin
    >>> Enter Password –
    batch file executed sucessfully as below
    D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>weeklyMigration.bat
    D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>utility.bat MigrationDefinition.xml
    Sep 15, 2013 11:26:19 PM com.hyperion.hit.registry.DatabaseComponentImpl getData
    baseHostName
    INFO: Registry DB has been configured with thin driver jdbc:oracle:thin:@jxebdrd
    b.dpworld.ae:1576:DPUT.
    Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
    INFO: Client Enable Status false
    Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
    INFO: Audit Client has been created for the product HUB-11.1.2.0
    Sep 15, 2013 11:26:21 PM
    INFO: Initializing CMSClient.
    Sep 15, 2013 11:26:21 PM
    INFO: CMSClient initialized successfully.
    Sep 15, 2013 11:26:21 PM
    INFO: Checking if application group Foundation exists in Registry.
    Sep 15, 2013 11:26:21 PM
    INFO: Validating user inputs.
    Sep 15, 2013 11:26:21 PM
    INFO: User input validations done.
    Sep 15, 2013 11:26:21 PM
    INFO: Checking if application group Foundation exists in Registry.
    Sep 15, 2013 11:26:21 PM
    INFO: Retrieving application id for application with display-name Shared Service
    s.
    I had remvoe display line.
    Exported Artifact - Groups.
    Sep 15, 2013 11:26:26 PM com.hyperion.css.exchange.framework.CSSIEJob doExport:8
    3
    INFO: Successfully exported 0 roles.
    Exported Artifact - Roles.
    Exported Artifact - DPWUAE.
    Exported Artifact - fdqm_app.
    Exported Artifact - Reporting and Analysis.
    Exported Artifact - Essbase Studio Server2.
    Exported Artifact - HBRAPP.
    Exported Artifact - Shared Services.
    Exported Artifact - Sample.
    Exported Artifact - Sample_U.
    Exported Artifact - DMDemo.
    Exported Artifact - EssbaseCluster-1.
    Exported Artifact - Samppart.
    Exported Artifact - TestCube.
    Exported Artifact - ASOsamp.
    Exported Artifact - Demo.
    Exported Artifact - Sampeast.
    Migration Status - Success
    D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>
    Now I unable to find the LCM backup file, where it has generate? what is the location of the backup file by this batch execution?

    As for my knowledge "." will fetch from the directory where we are running.Exactly. A directory. Not a JAR file. If you want to access it via File, you can't put it into the JAR. if you want to put it into the JAR, you need to use Class.getResource() and friends.

  • Java.io.IOException: unable to find the type mapping resource file

    Hi,
    I am using weblogic7.0 to deploy my applications. I wrote a web service and
    was able to deploy it sucessfully. I am trying to access the web service through
    a jsp page. I am the error posted below on my server and " error:505 internal
    server error" on the browser. Can any one please help me out with the problem.
    My jsp page just displays the float value i am returing from the session bean
    method.
    Thanks,
    Ramya.
    <Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
    55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
    java.io.IOException: unable to find the type mapping resource file for:bank.Ban
    kService
    at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
    stry.java:62)
    at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
    at bank.BankService_Impl.<init>(BankService_Impl.java:23)
    at jsp_servlet.__getbal._jspService(__getbal.java:106)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
    n(ServletStubImpl.java:1058)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:401)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:445)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:306)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
    on.run(WebAppServletContext.java:5412)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
    ceManager.java:744)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
    ervletContext.java:3086)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
    mpl.java:2544)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
    >
    <Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
    g application: appsdirbankwebapp_war>
    <Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbankwebapp_war on myserver - Running>
    <Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
    application appsdirbankwebapp_war on myserver - Completed>
    The url value from the jsp page ishttp://localhost:7001
    The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
    ce
    <Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
    20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
    java.io.IOException: unable to find the type mapping resource file for:bank.Ban
    kService
    at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
    stry.java:62)
    at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
    at bank.BankService_Impl.<init>(BankService_Impl.java:23)
    at jsp_servlet.__getbal._jspService(__getbal.java:106)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
    n(ServletStubImpl.java:1058)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:401)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:445)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:306)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
    on.run(WebAppServletContext.java:5412)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
    ceManager.java:744)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
    ervletContext.java:3086)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
    mpl.java:2544)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
    >

    Hi Manoj,
    Thanks a lot for your hepl. I tried as you said and its working now.
    Ramya
    "manoj cheenath" <[email protected]> wrote:
    Make sure that you put the client jar file generated by
    clientgen in the lib directory of the jsp web app.
    It looks like the runtime is unable to load
    <service>.xml type mapping file. This xml file
    should be in the classpath (web-inf/lib or
    web-inf/classes).
    -manoj
    "Ramya" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
    was able to deploy it sucessfully. I am trying to access the web servicethrough
    a jsp page. I am the error posted below on my server and " error:505internal
    server error" on the browser. Can any one please help me out with theproblem.
    My jsp page just displays the float value i am returing from the sessionbean
    method.
    Thanks,
    Ramya.
    <Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
    55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
    java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
    kService
    atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
    stry.java:62)
    atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
    at bank.BankService_Impl.<init>(BankService_Impl.java:23)
    at jsp_servlet.__getbal._jspService(__getbal.java:106)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
    n(ServletStubImpl.java:1058)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:401)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:445)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:306)
    atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
    on.run(WebAppServletContext.java:5412)
    atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
    ceManager.java:744)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
    ervletContext.java:3086)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
    mpl.java:2544)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
    >
    <Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
    g application: appsdirbankwebapp_war>
    <Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
    application appsdirbankwebapp_war on myserver - Running>
    <Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
    application appsdirbankwebapp_war on myserver - Completed>
    The url value from the jsp page ishttp://localhost:7001
    The wsdl value from the jsp page
    ishttp://localhost:7001/web_services/BankServi
    ce
    <Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
    20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
    java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
    kService
    atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
    stry.java:62)
    atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
    at bank.BankService_Impl.<init>(BankService_Impl.java:23)
    at jsp_servlet.__getbal._jspService(__getbal.java:106)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
    n(ServletStubImpl.java:1058)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:401)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:445)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
    mpl.java:306)
    atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
    on.run(WebAppServletContext.java:5412)
    atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
    ceManager.java:744)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
    ervletContext.java:3086)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
    mpl.java:2544)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
    >

  • Unable to find Admin tab in OBIEE 11G BI Publisher

    hi all,
    i am unable to find the Administrator tab in OBIEE 11G BI Publisher. even if i login through the administrator privileges.
    can some one provide solution for this how to enable the Administration tab in BI Publisher.
    Thanks
    Yogi.

    Take a look at the following link: Note that this blog post does not apply to the 11g version but check it out.
    http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/
    Thanks,
    Bipuser

  • Unable to find a WSDL that has a definition for service

    Dear all
    I have a very simple composite applicationexposing a web service. When I deploy the application I get:
    There was an error deploying the composite on soa_server1: Deployment Failed: Unable to find a WSDL that has a definition for service {http://soa/sf/login}bpelprocess1_client_ep and port loginPort_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.
    However the build process shows no errors. The entire application was built using Jdeveloper 11.1.1.5 using a pre-constructed WSDL. The SOA suite is 11.1.1.5
    Any pointers will be really appreciated.
    Thanks
    The composite is this:
    <?xml version="1.0" encoding="UTF-8" ?>
    <!-- Generated by Oracle SOA Modeler version 1.0 at [2/28/13 2:25 PM]. -->
    <composite name="SOA2" revision="1.0" label="2013-02-28_14-25-14_553"
    mode="active" state="on" xmlns="http://xmlns.oracle.com/sca/1.0"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
    xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
    xmlns:ui="http://xmlns.oracle.com/soa/designer/">
    <import namespace="http://soa/sf/login" location="loginToSFDC.wsdl"
    importType="wsdl"/>
    <service name="bpelprocess1_client_ep" ui:wsdlLocation="loginToSFDC.wsdl">
    <interface.wsdl interface="http://soa/sf/login#wsdl.interface(loginPort)"/>
    <binding.ws port="http://soa/sf/login#wsdl.endpoint(bpelprocess1_client_ep/loginPort_pt)"/>
    </service>
    <component name="BPELProcess1" version="2.0">
    <implementation.bpel src="BPELProcess1.bpel"/>
    <property name="bpel.config.transaction" type="xs:string" many="false">required</property>
    </component>
    <wire>
    <source.uri>bpelprocess1_client_ep</source.uri>
    <target.uri>BPELProcess1/bpelprocess1_client</target.uri>
    </wire>
    </composite>
    The WSDL used to generate the BPEL is:
    <?xml version= '1.0' encoding= 'UTF-8' ?>
    <definitions
    targetNamespace="http://soa/sf/login"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns1="http://soa/sf/login"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:flt="urn:fault.partner.soap.sforce.com"
    xmlns:obj="urn:sobject.partner.soap.sforce.com"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:typ="urn:partner.soap.sforce.com"
    xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
    >
    <types>
    <xsd:schema targetNamespace="http://uk.gov.fca.sf/login" elementFormDefault="qualified" xmlns:tns1="http://uk.gov.fca.sf/login"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:flt="urn:fault.partner.soap.sforce.com"
    xmlns:obj="urn:sobject.partner.soap.sforce.com" xmlns:typ="urn:partner.soap.sforce.com"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
    <xsd:import namespace="urn:partner.soap.sforce.com" schemaLocation="xsd/partner_types.xsd"/>
    <xsd:import namespace="urn:fault.partner.soap.sforce.com" schemaLocation="xsd/partner_faults.xsd"/>
    <xsd:import namespace="urn:sobject.partner.soap.sforce.com" schemaLocation="xsd/partner_objects.xsd"/>
    </xsd:schema>
    </types>
    <message name="loginInMessage">
    <part name="loginIn" element="typ:login"/>
    <part name="LoginScopeHeaderIn" element="typ:LoginScopeHeader"/>
    <part name="CallOptionsIn" element="typ:CallOptions"/>
    </message>
    <message name="loginOutMessage">
    <part name="return" element="typ:loginResponse"/>
    </message>
    <portType name="loginPort">
    <operation name="loginOp">
    <input message="tns1:loginInMessage"/>
    <output message="tns1:loginOutMessage"/>
    </operation>
    </portType>
    <binding name="loginPortSOAP11Binding" type="tns1:loginPort">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="loginOp">
    <soap:operation style="document" soapAction="http://soa:8101/login/loginOp"/>
    <input>
    <soap:body use="literal" parts="in"/>
    </input>
    <output>
    <soap:body use="literal" parts="return"/>
    </output>
    </operation>
    </binding>
    <binding name="loginPortSOAP12Binding" type="tns1:loginPort">
    <soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="loginOp">
    <soap12:operation style="document" soapAction="http://uk.gov.fca.sf:7101/login/loginOp" soapActionRequired="false"/>
    <input>
    <soap12:body use="literal" parts="in"/>
    </input>
    <output>
    <soap12:body use="literal" parts="return"/>
    </output>
    </operation>
    </binding>
    <service name="loginSrvc">
    <port name="login_port_11" binding="tns1:loginPortSOAP11Binding">
    </port>
    <port name="login_port_12" binding="tns1:loginPortSOAP12Binding">
    </port>
    </service>
    <partnerLinkType name="ProviderRole"
    xmlns="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
    <role name="Role1">
    <portType name="tns1:loginPort"/>
    </role>
    </partnerLinkType>
    </definitions>

    Hi,
    I don't see a loginPort_pt port in the wsdl, but it is referenced by the composite...
    There's only ports login_port_11 and login_port_12 defined...
    Cheers,
    Vlad

  • Problem with PI7.1 Newly Installed - Unable to find resource

    Hello All,
    I installed PI 7.1 Newly. I configured Sample File to File Scenario. When i running the sample scenario I got the following message. Please suggest me on this.
    Unable to find resource 87393791-ca19-11dd-81ab-
    fd0dc0a8015a in the following software component
    versions:
    Thanks
    Venkat K
    Edited by: venkat k on Dec 18, 2008 10:05 PM

    Hi Venkat,
    Did you configure for Central SLD? Try restarting the Java engine from SMICM.
    Check the status of SLD by running SLDCHECK transaction.
    Login to SLD and under Technical system of type Process Integration - you should be able to 6 components. Check whether all the components exists
    1. Adapter Engine 2. Domain 3. ID 4. IR 5. Integration server and 6. RWB
    If anything is missing, please follow the note mentioned above.
    Thanks,
    Srini
    Edited by: srinivas kapu on Dec 18, 2008 10:05 PM

  • ERR-1002 Unable to find item ID for item "FLOW_SESSION" in application

    Hi,
    I installed the Tracking Issue application.
    It was working fine until I ugraded HTMLDB (latest patch).
    If I access it with another browser without going into htmldb development tool , it works fine.
    If I clic the RUN in HTMLDB development tool and login with a valid htmldb user I now get :
    ERR-1002 Unable to find item ID for item "FLOW_SESSION" in application "11964
    thanks
    Francis.

    Thanks Scott,
    It works .
    I find it is sometimes difficult to search in the OTN forum.
    Is there a trick to be able to search on multiple words ?
    Also, the results shows the same page occurence multiple times. It would be nice if it could only show it once .
    (This forum should be done in HTMLDB ;) )
    Thanks again.
    Francis.

  • ERR-1002 Unable to find item ID for item "SESSION"

    Hi All,
    We have recently ugpraded from Aoex 3.1 to 3.2 and have now noticed on occasions that i get the following error when logging in...
    Unexpected error, unable to find item name at application or page level.
    ERR-1002 Unable to find item ID for item "SESSION" in application "2500".
    Return to application.I have been making changes to the application but have not changed anything to do with the SESSION item, i thought that was built into APEX so am not sure why it cannot find it.
    The error mainly happens if i clear the internet cache and try logging in again on a new session, i click Return to Application and try logging in again but get the error. If i login as a different user it logs in.
    Has this happened to anyone else?
    Thanks
    Graham

    Scott,
    Sorry, typing error, i meant 3.0 to 3.1.
    when a user clicks login the following happens...
    A Validation runs to determine if the username and pasword is right and if the user has parts to be accepted when logging in....
    DECLARE
      V_User_Check     VARCHAR2(800);
    BEGIN
        V_User_Check := M_USERS_VALIDATE_LOGIN(
           :P101_USERNAME, :P101_PASSWORD, :SESSION, :P101_BENCH, :P101_BENCH_ID);
        IF V_User_Check = 'PASSWORD_CHANGE' THEN
          :P101_PASSWORD_CHANGE := 'YES';
          RETURN 'You password must be changed for security purposes.  ' ||
                 'Please enter and retype a new password, then confirm the ' ||
                 'change by entering your existing password.';
        ELSIF V_User_Check = 'INVALID_USERNAME' THEN
          RETURN 'The username has not been recognised, please re-enter.';
        ELSIF V_User_Check = 'INVALID_PASSWORD' THEN
          RETURN 'The password entered is invalid, please re-enter.';
        ELSIF V_User_Check = 'ACCEPT_PARTS' THEN
          :P101_PARTS_TO_ACCEPT := 'YES';
          RETURN 'There are parts at this bench that need to be accepted/rejected for you to use, please check the quantities carefully.';
        ELSIF V_User_Check = 'OK' THEN
          RETURN '';
        ELSE
          RETURN V_User_Check;
        END IF;
    END;The following function is called from the Authentication Scheme (return authenticate_m_user;)
    CREATE OR REPLACE FUNCTION authenticate_m_user(p_username IN VARCHAR2, p_password IN VARCHAR2)RETURN BOOLEAN IS
      CURSOR m_cur( username_p VARCHAR,password_p VARCHAR) IS
        SELECT COUNT(*) user_count FROM m_users
        WHERE UPPER(username) = username_p
        AND PASSWORD = password_p AND in_use = 'Y';
      result_v                BOOLEAN := FALSE;
      V_Admin                 VARCHAR2(1) :=  'N';
    BEGIN
      FOR m_rec IN m_cur(p_username, dbms_obfuscation_toolkit.md5( input_string => p_password))
      LOOP
        IF m_rec.user_count = 1 THEN
          result_v    := TRUE;
        END IF;
      END LOOP;
      IF result_v = TRUE THEN
          UPDATE m_users
            SET logged_in = 'Y', last_login_date = sysdate
            WHERE upper(username) = upper(p_username);
          COMMIT;
      END IF;
      RETURN result_v;
    END authenticate_m_user;Also when i encounter the error if i keep clicking Login it keeps throwing the error, but if i turn on debug and then click login again it logs in ok.
    Hope this helps.
    Graham.

Maybe you are looking for

  • How to find if an user account is locked in weblogic server or not?

    Hi, I am using jdev 11.1.2.2. SO i have set in web logic that if a user inputs login information wrongly his account will be locked. How can i identify if the user account is locked. Write now if the user account gets locked after say five invalid lo

  • How to populate values of KATR fields in additonal customer  Data in XD02

    i have a requirement to populate valutes in KATR(attribute) fileds in addtional cutomer data screen of XD02 I have to group few attributes into and then if we give data in one attribute, the other attributes must give the possible value. please provi

  • Changing the key in apple loops

    Most of the loops that came with my GB2 are in "C".. is there any way to change each loop to a different major key.. say "G" or "A"

  • PROBLEMS WITH VIDEORA CONVERTER

    hello. i went and downloaded a dvd encrypter and the videora ipod converter. the video itself has been converted, AND in itunes but when i try to drag it to my ipod it says it could not go in my ipod cause my ipod will not play it. please help!!!

  • Withholding tax details - mass change

    Hi All, We have the requirement of changing the customer/vendor master withholding tax details (tables LFBW / KNBW). we have tried using XD99. however XD99 does not update table KNBW. For vendors, we tried XK99 which can be used for changing fields o