Tcp ip remote control without computer

Hii,
i would like to get data from a device over TCP/IP, or send data but i dont want to use Pc near that device, is there any product or device, that i can connect it from my pc over TCP/IP and get datas.
Thanks a lot

alican wrote:
Hii,
i would like to get data from a device over TCP/IP, or send data but i dont want to use Pc near that device, is there any product or device, that i can connect it from my pc over TCP/IP and get datas.
Thanks a lot
What interfaces does this 'device' have?
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

  • MSI TV@Anywhere PLUS remote control shut down problem

    Hi!
    I have a MSI TV@Anywhere PLUS card working fine. I use the remote control without problem. Except that, when i want  to shut down my PC with it. I push "POWER", the app closes, and after that i push "RESET" and I get this: "Press "Power" to shut down your computer, or any other key to cancel" . But whatever I try to push on the remote, nothing happens...but by the mouse, the OK or Cancel buttons work.
    Can somebody help , what is going on?
    thanks much!

    Hi All,
    I solved my problem with some trying, this msi remote is really funny....
    Okey, so It appears that, when the above mentioned "shut down or cancel" window comes up pushing the "RESET" on my remote, the remote app. stops receiving commands/stops working. If i close this window, I am able to use again my remote controller. phhhh....
    All right, lets use the built-in mouse/pointer controller to click (5) on OK in the window, when it is asking for shut down... NOT working either, because as i mentioned above, when the window appears, the remote stops working... jejeje :D
    So, I made a shutdown.exe command icon on the desktop, and I can click on it with my remote...solved...
    (the remote controller cannot navigate the cursor above the windows taskbar i do not no why..., besides this, it is ridiculous how difficult to move the cursor with he controller, pushing like crazy :D )

  • PDA and remote control

    Hello,
    I am attempting to use a PDA to remotely control a computer.  However I am getting errors such as "property node 'Property Node': Not supported for current target". 
    Another error I am running into the the inability to execute subVIs.
    Let me know if I should provide additional information.

    Hi Thejoeblack,
    Thanks for contacting National Instruments.  I've been looking into your question about using a PDA and I have a suggestion for you.  First off, are you just getting started with the PDA? If so, then I would suggest searching in Help>>Find Examples for "PDA."  Here you can find some good examples that I think will help you out.  One in particular is entitled "PDA Tutorial-Pocket PC."  I would suggest looking at this example and the Getting Started Guide located on your computer under Start>>All Programs>>National Instruments>>LabVIEW>>LabVIEW Manuals.  I hope some of this helps and please feel free to reply if you still have some questions.  Thanks!
    Regards
    Noah R
    Applications Engineering
    National Instruments

  • A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    Setup for remote app: http://support.apple.com/kb/ht1947
    Specifically:
    Set up Apple TV (2nd and 3rd generation)
    On Apple TV, select Settings from the main menu.
    Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
    Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV.  If  you connect your Apple TV to your iTunes library using  Home  Sharing, you can use Remote to browse and play content from any  iTunes library in the Computers   section of your Apple TV. You can also  use Remote to select  between available speakers to enhance  your  audio and video experience.

  • How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.

    How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.
    We have 10 Client Nodes in the field and we need two "View Only" functionality in Client machines located on Supervisory Desks.

    I have done this. There are many ways to approach this but I will offer what I think is the easiest. This will work ONLY if you have been assigning security levels to your objects (objects that actually control devices in the field) greater than zero AND allowing a security level of zero to view all panels. When I develop interfaces I do this just for creating a non control client.
    Basically, you remove all users from the Lookout client in the user manager. You will not be able to remove the built-ins, "Guest" and "Administrator". Now when the end users tries to login using his normal login he will be denied. Consequently, he will not be able to control. But, he will still be able to view all the information since a no login can view a panel with a viewing se
    curity level of zero. You must ensure any pushbuttons that are used to open panels have a security level of zero.
    Now you can copy this security profile by finding the lookout.sec file and copying it to another non-control client computer. In Windows NT this file is located in the system32 directory.
    There are many other ways but I find this the easiest.
    Regards,
    Tommy Scharmann

  • Zen Touch optional wired remote control to play FM radio how do I get it? or can it work without

    One of the reasons why i am thinking of buying a zen touch is becuase it has a FM radio built in. From the website it says you need an optional wired remote control to listen to the radio, where can i get one in the uk? or can it work without it's

    The Zen Touch doesn't have a radio built-in. You'd need this:
    http://uk.europe.creative.com/shop/category.asp?cate=5
    The Zen Micro does have an FM tuner built-in.

  • Remotely control iphone from PC without jailbreak

    detail:
    iphone4s
    ios7
    left side screen is not working
    hey guys,i wanna ask,my left side screen is not working and i just installed ios7,it needs to connect to wifi to set/configure everything in but i cant type the wifi password due to my left side screen is not working.is it possible for me to remotely control my iphone from pc without jailbreak and PERMISSION(normally yes option is on the left side) since my left screen is dead.
    please help guys.

    No. It's not possible. Make an appointment at the genius bar and get it replaced.

  • HP Remote Control. Who gave you permition to put it on my computer with the last unasked for update

    Yesturday my computer informs me that it will restart in four minutes to update and when it restared my user account shows HP remote control as a user. Like hell! I paid for it, it;s my computer the only person who has a right to control it is me! And if I want an update I'll ask for it.

    Well said.

  • Ipod Hi-Fi A1121 how to run without remote control

    Hello. I have A1121 ipod hi-fi speakers but i lost the remote control, how can i run that without remote controllers?

    The new admin solution did not work for me.
    I just got a remote today and tried to get it working but no joy. I'm having the same problem in that the 'setting' for infared receiver in security preferences is just not there?
    also in my USB settings/profile there is no mention of infared.
    anyone got any ideas? is it a bug with the software updates?

  • Apple tv remote control is operating itunes on computer

    Occasionally when clicking on the Apple TV remote control, the volume on my computer is being changed at the same time. My computer and Apple TV are in the same room , so how can I make it so the remote only controls the Apple TV?

    Turning off home sharing will not help, indeed it will stop your Apple TV connecting to your iTunes library.
    If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences > Security > General, click on the Advanced button in the bottom right corner - If the button is greyed out, click on the lock icon and enter your administrators password))
    If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
    To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

  • Remote control of iPad from computer or another iPad

    Hello!
    Dear all,
    I'm trying to find an application that wiil allow me to control an iPad (3,4) remotely from my Windows computer or from another iPad.
    I know there are plenty of apps doing the opposite (e.g. control your computer using the iPad, - teamviewer etc) but I cannot find an application doing the same job the other way. I need it for company reasons, because we have many customers using iPads with our applications installed on them.
    Please let me know if something like this exists. I am for Greece so i;m talking for the local App Store.
    Thank you,
    panos_mc

    Has anybody heard anything about an app called SOTI MobiControl?
    It says that with this software installed you can control your iPad  from your computer desktop.
    Thank you,
    panos_mc

  • Cannot remote control clients in another domain

    Hi,
    I have successfully rolled out SCCM 2012 clients with SCEP to machines in our current domain but I now need to do the same to another domain (in a two way trusted forest/domain). I can install the clients without any issue (by adding the DNSSUFFIX argument
    to the client push so it can find it's way home), and they are reporting back in successfully including inventories.
    However I cannot remote control any of these clients from the console, I've added a domain admin account (from the trusted domain) as a viewer and I've added the Windows firewall exceptions in the agent details. I can get to these clients without any
    issues, tracert is fine so I know the routing is good.
    If I try and connect I get the generic "Cannot connect to computer" (after "initiating security handshake"), if I do it direct from the Remote Control client I can remote control the client after dismissing the warning "Remote computer
    identity cannot be identified". But I understand that this uses NTLM rather than Kerberos.
    What have I missed ? I had all this working in SCCM 2007 without any issues so pretty sure the underlying infrastructure is sound.
    Any help gratefully received and thanks for taking the time to read this.
    Brian.

    Thanks everyone for taking the time to reply - I'll put this is the one reply it's easier !
    @Jason
    Interesting about the DNSSUFFIX thing, there are DNS forwarders back to the domain and it seems to find its way home. When I had SCCM 2007 I used the SMSSLP parameter for the client install, I can't do that in SCCM 2012 hence the DNSSUFFIX parameter.
    CmRcViewer.log has been very helpful, I didn't know that one existed - I guess I have some kind of lookup issue going on ;
    Address Lookup failed for the target host: WSUSTEST.
    No such host is known. (Error: 80072AF9; Source: Windows) CmRcViewer 03/12/2014 11:40:52 13048 (0x32F8)
    Address Lookup failed for the target host: WSUSTEST.
    No such host is known. (Error: 80072AF9; Source: Windows) CmRcViewer 03/12/2014 11:40:52 13048 (0x32F8)
    Failed to connect to remote system. This can be caused by several conditions: system is turned off, system cannot be reached, windows firewall blocks TCP Port 2701, or remote control feature is disabled. CmRcViewer 03/12/2014 11:40:53 13048 (0x32F8)
    Sending 'Remote Control session failed to start' status message for session with remote system WSUSTEST CmRcViewer 03/12/2014 11:40:55 13048 (0x32F8)
    @NolanC
    The issue is from the console - I can connect via FQDN or IP but get the warning "The Remote computer identity cannot be verified".
    @Joyce
    See the extract above, thanks for pointing me towards this log. I can confirm that the correct Firewall exceptions are in place and the membership of the ConfigMgr Remote Control Users reflects the permitted viewers in the client settings.
    Just seeing if I can resolve the lookup issue, DNS seems to fine ! Unless I've missed something in SCCM.

  • My macbook pro is moving on its own. Not sure if its being remotely controlled or if its a bug but its annoying!!

    I have a 15inch Macbook Pro that has recently been acting wacky. It feels like someone else is controlling my computer but all my sharing featured are turned off and i have my firewall on so i doubt its being remote controlled. Using my cursor is a constant battle. Sometimes its fine other times it won't cooperate. At random times the cursor will move and highlight a word and define it. YES Define the highlighted word. While on safari it'll  randomly zoom in on the webpage im on,  and contiue to highlight and  try to switch pages. It'll switch from desktop to  dashboard on its own as well as  make my launch pad disappear and reaapear. without me touching it at all. SOMEONE HELP !

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    4. Reset the System Management Controller.
    5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Remote Control and Firewall WinXP SP2

    Does any of you guys know how to prepare WindowsXP SP2 release which would
    enable firewall settings when installed?
    What is the most efficient way to handle this? I am just trying to prepare
    the remote control issue before SP2 is released.
    Thanks in advance for your input.
    Jeff

    hi,
    you can open port that is need for ZENworksPORT UDP : 17611762 TCP:
    21, 517,1763.
    I can remote management a workstation that is a windows xp with sp2 now.
    "Michael Rhoadarmer" <[email protected]> дʼ
    news:Tnntc.920$[email protected]..
    > 1761 1762 1763
    >
    > >>> Michael Rhoadarmer<[email protected]> 05/27/2004
    9:58:35 AM >>>
    > We open up 1761,3, & 3 TCP and use [localhost] for the field for computer
    host. (inclued the brackets)
    >
    > >>> JS<[email protected]> 05/21/2004 4:18:35 PM >>>
    > Does any of you guys know how to prepare WindowsXP SP2 release which would
    > enable firewall settings when installed?
    > What is the most efficient way to handle this? I am just trying to prepare
    > the remote control issue before SP2 is released.
    >
    > Thanks in advance for your input.
    >
    > Jeff
    >
    >
    >
    >
    >
    >

  • How do I Remotely Control my Canon EOS-1D Mark II Camera?

    Hi, I was wondering if anyone out there knew of a driver or a piece of software that I can download to remotely view and remotely control my Canon EOS-1D Mark II digital camera from my MacBook Pro? The drivers that Canon provides only work on PPC platform, not Intel (to the best of my knowledge), and I can't seem to find an alternative. I even tried the trial version of Phase One's Capture Pro, but it didn't work with the camera!
    I know this may not be the correct forum to place this question, but didn't exactly know where else to go with it! Please if someone can please help I'd be eternally grateful! The way I have my camera mounted is nearly impossible to accurately view the object through the viewfinder without climbing up the side of a wall!! Any help, ideas, or suggestions will be much appreciated!
    Thanks!
    MacBook Pro Mac OS X (10.4.8)
    MacBook Pro   Mac OS X (10.4.8)  

    adholden
    Welcome to the Apple Discussions
    The PPC software should run on the Intel Machine using the Rosetta emulation. Try it and see. Some cameras can be controlled - at least pics can be taken - via Image Capture (It's in your Applications Folder). From the Image Capture Help:
    Many cameras let you take a picture using Image Capture when the camera is connected to your computer.
    Connect your camera, and click Download Some.
    Click Take Picture.
    The camera snaps a picture, which then appears in the window.
    If you don't see the Take Picture icon, choose View > Customize Toolbar, and drag the icon to the toolbar.
    If the Take Picture icon is dimmed, your camera does not support this feature.
    This works with my Canon S2.
    Regards
    TD

Maybe you are looking for