TCP Read doesn't work sometimes

Hi Everyone, I have a problem where my build .exe doesn't work on some computers but works fine on others. it uses a tcp connection to grab data off a custom server program which packages bluetooth data.
The program build works fine on my development computer as well as another desktop, but on a 3rd computer the code simply doesn't read the data from the server. I've disabled windows firewall but i have no idea what else to try - anyone have this problem before?
Solved!
Go to Solution.

That tells me there was a driver you did not install on the other computer.  LabVIEW 2013 tries to automatically figure out what drivers you need when you configure an installer.  This issue does not sound like it had anything to do with the TCP/IP.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • LAN with TCP/IP doesn't work

    Hello,
      I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
    Thank you very much

    Perhaps you could describe you network in a little more detail.
    Is this a Workgroup home network or are you connected to a Domain server?
    If this is a workgroup are you connecting to the internet via a cable or DSL router?
    Do other computers on your network connect OK?
    Has your S10e ever worked properly on the network?
    Are you connecting via a wireless access point or LAN cable? 
    What do you Ping on and from where?
    Can you Ping OK on another networked computer?
    Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG  /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

  • HT201401 my sleep button doesn't work sometimes

    there is a problem with my sleep button,it doesn't work sometimes
    can someone tell me how to rectify that problem

    Backup and restore your device. If still having problem, then its a hardware issue.

  • I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My safari doesn't work sometimes, but I connect with the internet.

    my safari doesn't work sometimes, but I connect with the internet. Some of the videos I can't see with the Safari browser, but I can see it with other brower. But my friend can see these videos with her safari. And I can not connect with the app store sometimes.

    Before you try to configure the settings on your Router, first thing which you need to do is, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...
    Connect the Modem to the Linksys Router on the Internet Port and then connect your computer to the Linksys router on the LAN Port 1. On your Computer click on Start - Run - CMD and click Ok... Now in the Command Prompt window type "ipconfig" and hit enter and note down the "IP address, Subnet Mask and Default Gateway" , Now again in the Command Prompt window type "ping default gateway IP" and hit enter and check if you are getting any replies, If yes then you can login to the setup page of the configure all the settings on it from scratch. 
    If your Internet Service Provider is Cable follow this link

  • Adobe Reader doesn't work after windows 7 update

    Hello,
    My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
    I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
    I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
    When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
    Could anyone help me?
    Thanks!

    You can try running cleaner on your machine
    http://labs.adobe.com/downloads/acrobatcleaner.html
    and then again install latest Reader from
    http://get.adobe.com/reader/enterprise/

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

    Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

    More information please.
    Version of Reader? OS?  Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

  • Cac card reader doesn't work on my mac now

    I upgraded to mountain os x lion and now my cac card reader doesn't work when I login in to ako. when I use the cac card login it doesn't read my id or the reader. what can I do to fix it because i've been googling and I haven't found a solution.

    Try militarycac.com 
    There are both free and low priced commercial solutions for this and the Chief covers all options at his website.
    -- Bill

  • I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • [kde]Gamin doesn't work sometimes.

    Hi all!
    I've read arch wiki and found, that gamin is lighter and better than fam.
    But after installing gamin dolphin do not show actual file system content. If I  move a folder it doesn't show it until manually refreshing (or by F5).  Sometimes it is working, sometimes no.
    I'm using KDE4.6. Do not remember about 4.5.
    Could anyone suggest the solution?
    Last edited by vit (2011-02-03 07:42:11)

    KDE should not need neither fam nor gamin. It directly uses kernel's inotify to monitor filesystem changes.

  • HT1430 The home button doesn't work sometimes.  Am I using the wrong pressure?

    The home button doesn't response sometimes.  Is there any technique?  Am I using the wrong pressure?  Please help

    This may or may not work; no harm trying.
    Calibrate the Home button
    1. Open a pre-installed app, such as Contacts
    2. Press and hold the sleep/wake button until the red slider appears
    3. Immediately release the sleep/wake button; press and hold the Home button.
    4. Hold until the red slider disappears.

  • Iphone 5 auto screen-off doesn't work sometimes

    it holds on until you don't touch the screen again. My device has already setted 1 minute time for automatic block but sometimes it doesn't work.
    Anyone with the same problem?

    Same here, 1 time at least that i have notice.
    Btw and i had experience the oposite, example: when i press the home button or on/off button to unblock the screen sometimes i have to press more then 3 to 4 times to appear image and unlock....
    anyone???

  • To stop a thread doesn't work sometimes

    in my programm i have a thread, wenn i want interrupt the running thread i wrote this code: myThread.stop(), it works indeed, but not everytime. i cannot understand why it doesn't work, can somebody tell me why and how to handle it?
    I thank you in advance.

    if (a_Condition_you_have_set) myThread stop();
    is depricated, though it should still work and if I remember rightly it could cause the thread to keep running (or not stop properly) - so causing memory problems.
    You have to use boolean values eg;-
    public void start() {  // the thread
    conditions;
    run();
    public void run() {
    conditions(false or true);
    public void stop() {
    conditions(false or true);
    - its a standard method, perhaps someone could provide a link, though if you do a search for thread + whatever, you should find it easily enough.

  • Macbook Pro SD Card reader doesn't work

    Hey all. A few weeks ago I plugged in my SD card like I've always done, but my SD reader didn't work. I've tried SMC reset and PRAM reset. Nothing works. The SD reader doesn't show up in apple system profiler nor in Disc Utility. I've tried different SD cards.
    What can be done?

    i tried that since Yosemite killed my SD Card reader... its so annoying. i don't even know if its a hardware or software issue. however, the check didn't worked... and all my 3 SD Cards are working well...

Maybe you are looking for

  • Remote for advancing slides in Keynote

    I'm posting this as a suggestion for Apple. I use a remote to advance slides for presentations. I would really like to be able to do that with the iPad. Bluetooth would be just fine. None of my Bluetooth mice will pair with the iPad so that won't wor

  • INSTALLMENT PAYMENTS FROM CUSTOMERS

    hi, can any body help me in the following scnario. 1)the customer has to pay 25%(as down payment) of total invoice amount with in 15 days from the date of purchase order 2) 15% of amount with in 30 days(1st insatallment) 3)30% of amount with in 45 da

  • Ipad 3 upgrade to IOS6.1 fail to view the top chart section in app store.

    Hi Does anyone get the same issue? Can apple fix it? Please fix it ASAP.

  • See burger EDI adapter (X12) functionalities

    Hi All, We are a consumer products company and have See burger EDI adapter (X12) implemented in XI IE. Could anyone tell me about the standard software components and mapping which comes along with the see burger adapter components, and how to custom

  • [SOLVED] Cmd-line utility to get X window info?

    There's some command-line utility whose name I can't remember. One starts it, then clicks the mouse in an X application, and the utility outputs a bunch of info like class name, instance name, an ASCII representation of the application's icon, etc.