TCP RST message from CSS11150 while doing pop or imap conn to content rule

Making a pop or IMAP connection to the pop.tiscali.be (you can sign up free to test if you want) the connection stops after approx 12minutes.
When capturing with a sniffer this connection I receive an TCP RST message from the content rule.
When I test it form the back-end network directly to the server it works fine.
Does anybody have an idea on what this could be ....timers or so?
Will sicky source ip help??

I would try sticky source to test but this seems odd at 12 minutes. You might need tac's help on this one.

Similar Messages

Reply/forward to a message from iPhone, Outlook does not show status

If you reply to a message from iPhone, Outlook does not show status (if replied or forwarded the message). The iPhone indicates the reply/forward icon however in Outlook I would have no idea if I responded to that message.

You're right. Had not noticed it before. Hopefully Apple will fix this in one of their future releases.

How to make auto recovery from error while doing project in Adobe Photoshop cc?

i got error from from Photoshop CC while doing work unable recover,back if it open again

Could you please elaborate?
Is there a file in the Folder "PSAutoRecover" on your scratch disk?

Message No. VN108 while doing MB90

Dear All,
While doing MB90 i got this error
*No messages for initial processing exist*
i have done SPRO setting for the same.
Please give me the solution on this.
Regards,
Anant

Hi
Can you please check whether the condition records for the output type/ processing mode etc are maintained in MN21?
Also please check whether the material document is created.
Please check the following parameters in the user profile
NDR-User group for printer determination in Inventory Manag.
ND9 - Print via Output control in IM
Hope this helps you
Regards,
Sasi

Why TEXT is not transfering from SD(while doing billing) to Fi ?

Hi Experts,
While doing billing of sales order in SD side,they are entering "text" manually?the same thing is not transfering to the accounting document which generated while billing?
What may be the reason??plz guide.
Regards,
Sumeya.

Dear Fernando,
i dont think so,user exit is required to solve this problem.
Actually the "TEXT" was transfering before 31.12.2008 .only the test is not transfering from 1st Jan 2009 to 30th jan 2009.
While debuging the standard programme,the error massage shows,
"Fiscal year varient not defined for the year 2009"
How can it possible??i already defined the fiscal varient V3(april to march with 4 sp.periods) and assigned to co.code.
If anybody have any idea,plz share with me.
Regards,
Sumeya
Edited by: sumeya offrin on Feb 4, 2009 12:55 PM

Unable to upload serial number from desktop while doing goods receipt MB01

Hi,
We have upgraded our system from 4.7EE to ECC6.0. While doing goods receipt for purchase order (MB01) in ECC 6 for serial number profile material, I can't find the option for uploading serial number from desktop where as the same option was there in 4.7.
Please help me .....
Thanks
Nrusingha Dash

Hi Experts.,
Thanks for all of you for responding my questions.
I found my question resloved.
Actually, in previous version, the standard program has been modified by taking access key. When the upgradation happened, it got overwrited to the previous one. So, in recent version it is not appearing.

Can we send a tcp/ip message from a specific port to the client

Hi All,
Iam currently trying to send a tcp/ip message to a remote machine on a specific destination port. For each tcp/ip message that iam sending iam able to figure out that the source port varies each time. So I wanted to know if it is possible to maintain a source
port for sending a tcp/ip message just like a destination Port. You can see my code below for reference:
TcpClient client = new TcpClient();
client.Connect("xxx.xxx.xx.xx", 2024);
NetworkStream clientStream = client.GetStream();
ulong refno = GetSessionID();
DateTime dt = DateTime.Now;
string str = dt.Year.ToString() + "-" + dt.Month.ToString() + "-" + dt.Day.ToString() + " " + dt.Hour.ToString() + ":" + dt.Minute.ToString() +
":00";
ASCIIEncoding encoder = new ASCIIEncoding();
string Input2 = "<STX>Inquire<US>REF=203.163.253.55<US>RQN=" + refno.ToString() + "<US>DTE=" + str + "<US>ACI=5274<US>ACE=C<US>ACS=A<ETX>";
string Input3 = "<STX>Inquire<US>REF=203.163.253.55<US>RQN=" + refno.ToString() + "<US>DTE=" + str + "<US>ACI=5274<US>ACE=C<US>ACS=A<ETX><CHECKSUM>";
int length = Input2.Length;
string hexValue = Input2.Length.ToString("X");
string hexValue2 = length.ToString("X");
// string Input = "\x02 Inquire\x1F REF=203.163.253.55\x1F RQN=" + refno.ToString() + "\x1F DTE=" + str + "\x1F ACI=5274\x1F ACE=C\x1F ACS=A\x1F \x3 \\x" + hexValue2;
string Input = "02Inquire1FREF=203.163.253.551FRQN=" + refno.ToString() + "1FDTE=" + str + "1FACI=52741FACE=C1FACS=A1F3" + hexValue2;
byte[] buffer = encoder.GetBytes(Input);
clientStream.Write(buffer, 0, buffer.Length);
clientStream.Flush();
ram

Hi ram,
The TcpClient class has a constructor that receives an IPEndPoint instance, this is the local EndPoint.
The IPEndPoint consists of two parts, the IP address and the port to use. you can specify the local port with this parameter.
IPAddress ipAddress = Dns.GetHostEntry (Dns.GetHostName ()).AddressList[0];
int port=9999;
IPEndPoint ipLocalEndPoint = new IPEndPoint(ipAddress, port);
TcpClient tcpClientA = new TcpClient (ipLocalEndPoint);
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installing packages from testing while doing a new install

Is this possible while doing a ftp install?
I need to install kernel 2.6.18 coz 2.6.17 wont boot (jmicron etc )

use quickinst but edit it in a way so that it writes a testing repo to the temporary pacman.conf in /tmp. you should be able to find it with a grep.

How to remove duplicate messages from Mail in Mavericks (POP)

Hello
I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep all my mail so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. Ileft it while I decided what to do, and had time to deal with it.
The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then uplanned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. However, I hadn't figured on two things:
1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size), a slow and unresponsive Mail program. I figure I have a number of options. Either I could abandon the last week's efforts and revert to the version of

Apologies, this was posted here in error. Please find updated post here: https://discussions.apple.com/message/27261965#27261965

"HKONT is empty" error message is getting while doing MIRO

Hi Gurus
While i am doing MIRO, i am getting the error message of "HKONT is empty". What is this error & how can i resolve and where can i check this G/L Account belongs to what?
Thanks in adv,
Regards
BADRI

Starting in release 4.6C, MM delivers complete tax information to
the tax modules. But we are performing some consistency checks. Part of those checks is the test if HKONT is empty and
T007B-STAZF has not been filled, otherwise we expect to get a correct
account. There are no further issues in dealing with the flag.
The error message may occur because of wrong customizing in the
transactions FTXP and OBCN for non-deductible tax:
1) FTXP: for the used tax code, please check / set with the button
"accounts" the accounts.
2) OBCN: please check for all the account keys of FTXP if some of
them have the value 3 for the setting "Posting indicator". In that
case, please check / set the flag 'not deductible' (= T007B-STAZF).
Please refer to attached note
377271 MR1M, MIRO: error FF804 'HKONT is blank'
Please use transaction FS02 to set the tax relevancy on the control datatab for the G/L Account in question. Please see the solution in point
2 of SAP Note 395919 for more detail.
395919 MIRO, MR1M: Error messages when calculating tax
Please also, review the standard system design as outlined
in Note 39591. In the standard system design, must have the accounts
set as relevant to tax.

Price should pick from PO not from Contract while doing GR

Hi All,
Quantity Contract is created as 1000 with net price Rs 1/-
PO is created against Quantity Contract say 100 quantity with net Price as Rs 15/-. PO value is Rs1500/-
GR and Invoice is done against PO.
Here, GR is happen agains Contract Price as Rs 1/- not PO price.
Please help me where is the settings to control either PO or Contract Price while posting Goods Receipt.
Regards,
Sudhakar

Hi Sudhakar,
During GRN, the price will be taken from material master accounting view.
Material : Standard Price
material master price: rs.1
po price : rs.10
GRN for 100 quantity : rs.100 in bsx and rs.900 in prd (price difference)
Material : Moving Average Price
material master price: rs.1
po price : rs.10
GRN for 100 quantity : rs.1000 in BSX and in material master, mov.avg.price will be rs.10
Regards,
Prasath

Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

Dear Folks,
We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
Could you pls let us know what we are missing here.
Thanks in advance.

I meet the same problem, any solution?

Message no M7146 while doing PGI

our process is Export sales and is as given below
Create Sales Order u2013 ZCIF VA01
Release of Purchase Requition-ME54N,
Create Factory stock Transport Order(P.O.)ME21N & Release-ME29N
Tranfer Posting the Goods-MIGO against the sale order MVT type-412E
Replenishment Delivery (VL10D)
Create Prof. Invoice For Replenishment Delivery VF01
Create Excise Invoice-J1IIN
Create ARE1
Create out bound delivery with sales order referenceVL01N
Create Billing document For Out bound delivery (VF01)
while processing the Replenishment delivery even if we have posted the stock against the sale order during the batch determination process it is not proposing the same and throughing error as stock only -- is available. so we are again bringing the sale order stock to URS and then determining the batch then we can able to determine our required batch, so before doing the PGI we are saving the delivery and then going to migo and transfer posting the stock against to sale order and the processing the delivery then we are facing the above problem.
actually in vl02n if we see the goods movement data tab the special stock indicator E is not updating, i think that might be the problem.
please guide

Hi
I need to understand some more things about your process
Create Sales Order u2013 ZCIF VA01 Fine
In between why do you need to do STO ? OK , that is a different thing
Tranfer Posting the Goods-MIGO against the sale order MVT type-412E
Note MIGO is different and transfer posting is different and Transfer posting is done in MB1B
What is the need to do MB1B with MVT type-412E
If you want to reserve stocks then use MVT type-413 without any special stock indicator
Make sure that your sales order (order type item )ZCIF category is not marked with special stock indicator E
but according to me this step is not at all reqd
actually in vl02n if we see the goods movement data tab the special stock indicator E is not updating, i think that might be the problem.
Which VL02N you are referring is it after Replenishment Delivery (VL10D) or Create out bound delivery with sales order reference VL01N
According to me your process will work fine if there is no MIGO or MB1B in between
Try this suggestion and update the forum and me
Regards
Raja
Edited by: ramanathan raja on Aug 28, 2009 12:03 AM

Stopping unread messages from appearing while phone locked

My question here is quite simple, however i have not been able to find a solution for it.
I have a password on my phone to lock it from sibling spys, when received a text message, although my phone is locked, the message appears on the screen for all to read, is there a way to prevent this?
Thanks

For anyone who has the same problem the solution is...
Go to > Settings > General > +Passcode Lock+ > and turn OFF +Show SMS Preview+
Thanks

Problem in picking base value from PO while doing goods receipt for multiple POs

Hi,
Our user is trying to post goods receipt for two purchase orders which have same vendor. After the materials of two POs are allocated in the item detail screen and checked the item ok, system throwing error as "Please check the base value of the item is zero" ( also excise tab does not appear for last three line items). This error does not occur when we are trying to do the goods receipt separately for each POs. Only when we do goods receipt for both the POs together, we are facing this error.
Please let us know what could be the reason. Is there an issue with standard CIN? Any notes to be applied? Please help!

Refer these notes for the issue.
1528009 - MAA: incorrect distribution of goods receipt
quantities
and
1677707 - Determining the valuation type for stock transport orders
at the time of GI
For Excise tab not appearing, you have to check J1ID for "Material-ChapterId combination" and "Cenvat Determination".
Regards
Binoy

TCP RST message from CSS11150 while doing pop or imap conn to content rule

Similar Messages

Maybe you are looking for